Info-set Execution

Dear All,
I have created one Infoset with two CUBEs and Three DSOs.
and in production environment I have big Data in the report (query Designer), and when I run the report it keeps processing and gets timeout at the end.
how can I optimize or enhance the Infoset run time?
Regards,
Mohammed Alramadan

Hi Mohammed,
There is not much optimisation options for infosets, but i suppose u can help performance by :
-> For cubes : Optimize the structure and the dimensions.
-> For DSO : - Keep the ID generation when DSO activation, this will slow load data time but it would help for reporting.
- Try to do an sql trace when u execute the query and determine where u do most of database access so u can create indexes on dso.
I had the same problem but i couldn't find a real solution. Applying the options i described allowed to gain little performance time but the query was not productive for large data.
Regards
Raed

Similar Messages

Info-Set performance

Hi, all
I have a little problem with requests on my info-set. Info-set inner joins two ODS-objects 0FIAR_C03 and ZC03_ODS on 0BILL_NUM. 0FIAR_C03 contains key fields:
0COMP_CODE, 0DEBITOR, 0FISCPER, 0FISCVARNT, 0AC_DOC_NO, 0ITEM_NUM,0FI_DSBITEM and index OBILL_NUM.
ZC03_ODS contains key fields: 0COMP_CODE, 0DOC_NUMBER, 0DELIV_NUMB, OBILL_NUM, 0DOC_CLASS. And then I filtered my request,for example, by 0DOC_NUMBER I was waiting for the result half an hour. But with no result. But then I filtered by OBILL_NUM, I've get the result for half a minute.
PS: ZC03_ODS ~ 1000000 records
0FIAR_C03 ~ about 700000 records

ODS indexes are like normal tables. If you have not defined any index, then there will be a primary index on the key fields of the ODS.
To analyze in detail, turn on SQL trace and run the query. In the trace results you should get the execution path with the index used, if any.

SAP Query Alias Table in Info-set not working

Hi Guys,
I'm having a bit of trouble with a query I'm writing in SQ01.
I am trying to create a standard margin report between two different costing variants that we use.
n order to do so I have had to employ the use of alias tables.
I have named the alias tables KEKO_2 and KEPH_2 accordingly and joined them in the info set with the same joins as the original tables (Left Outer to MARC on MATNR and WERKS)
However, when I have come to test the query in SQ01 I get a runtime error which states the following:
The following syntax error was found in the program
AQA0MASTER_DATA=STANDARDMARGIN :
"Field "KEPH_2-KST001" is unknown. It is neither in one of the specified
tables nor defined by a "DATA" statement . . . . . . . . . ."
But it is in a specified table! My alias table.
How can I make this query work?
Any help would be appreciated.
Thanks in advance.

Hi,
This is SAP business one reporting and printing forum. Please find correct forum and repost your question to get quick assistance.
Please close this thread by marking helpful answer.
Thanks & Regards,
Nagarajan

How to create code for an additional field in an info set

Hello,
I have an info set in tra SQ02 and the area is HCM with version ERP2004.
I need to create an additional field to show "Work permit" in ad hoc queries. I know that the infotype 0016 has a standard field P0016-ARBER which contains a date if that person has a work permit. System should select the latest record or the one which is valid during reporting period.
The requirement for this new field is that it should just has X if the field P0016-ARBER contains a date (i.e. that person has a work permit). If the field P0016-ARBER is empty, then the new field "Work permit" is also empty. So, the date itself is not enough.
I am not an abaper. I have tried to create a code for my field but there is always problems with the code. I have tried without the lineinto but checker says I need to. I have tried different places for statement ENDSELECT but without success. How should I do this?
What I have so far is (TYOLUPA = Work permit) is shown below:
select SINGLE ARBER
into TYOLUPA
from PA0016
where pernr = P0016-pernr
and ENDDA = '31129999'.
clear TYOLUPA.
if ARBER ne ''.
then TYOLUPA = 'X'.
endif.
Thanks for your advice!
Regards,
Pipsa

pia,
In extras tab create column "workpermit" in infoset and add that column to Field groups.
Then under record processing event...
DATA : TYOLUPA like PA0016-ARBER.
Under Record processing event.
select SINGLE ARBER
into TYOLUPA
from PA0016
where pernr = P0016-pernr
and ENDDA = '31129999'.
if TYOLUPA ne ' '.
WORKPERMIT = 'X'.
endif.
Don't forget to reward if useful...

Re:User group,info set and Query combination table

Hi,
I would like to know the combination table of User group,info set and Query.
Can any body please respond to my question?
Regards,
Suresh Kumar.

Hi,
Check the tables starting with AQG*.
Reward points if useful.
Regards,
Atish

Info Set on Transactional ODS

Hi Friends,
My Requiement is to create a Info Set on Tannsactional ODS and On this info set i have to create a Bex Query.
If i creata a Query on this info set whether we can get all the query properties like currency conversion etc as for the query created on noramal info set which is created on standard ODS.
Looking for more suggessions and answers.
Thanks in advance.

Hi Ashok,
Thanks for the immediate replay.
Hear i have to do a lenthi process before doing that ,i an looking for some b'dy who has worked on currency conversions at query level whcih are developed on infosets(i.e on Transactional ODS).
Once again thanks for the usefull answer.
Laxman

Info set query

Hello everybody,
I have a problem with the creation of info set (tcode : sq00 and sq02)
I need your help, i have to develop a query with a number Purchase Order and number of invoice.
For example : for a number of invoice : 5105617263
i have with TOAD (soft) this :
select distinct ekko.ebeln, rseg.belnr
from sapsr3.ekko, sapsr3.rseg
where ekko.ebeln = rseg.ebeln
and rseg.belnr = '5105617263'
and ekko.mandt = '350'
EBELN BELNR
4500013374 5105617263
4500014267 5105617263
I've tried to have the same result with an info set (sq02) and i have this :
Purchase Order Invoice
4500013374 5105617263
4500013374 5105617263
4500013374 5105617263
4500014267 5105617263
4500014267 5105617263
4500014267 5105617263
4500014267 5105617263
I dont know to develop in ABAP and i want to know if it's possible to have DISTINCT in an info set ?
Or which table can i use to have this ?
Thank you very much

thanks for your answers.
 
I tried to create a z programm with tcode SE38 but i dont have the key.
 
I would like to know if i can write this code on the tcode sq02 ?
 
this is my code :
 
FUNCTION /1BCDWB/IQG000000000487EXTR. 
 
""Interface locale : 
*" TABLES 
*" %SELOPT STRUCTURE RSPARAMS 
*" %DTAB STRUCTURE /1BCDWB/IQG000000000487 
*" CHANGING 
*" VALUE(%RTMODE) TYPE AQLIMODE 
*" EXCEPTIONS 
*" NO_DATA 
*" NO_AUTHORIZATION 
*" ILLEGAL_PACKAGE 
*" CURSOR_NOT_OPEN 
 
 
call function 'RSAQRT_SET_IDENTIFICATION' 
exporting iqid = %iqid 
 sscr_report = sy-repid 
changing rtmode = %rtmode. 
 
if %rtmode-pack_on = space or %rtmode-first_call = 'X'. 
 call function 'RSAQRT_FILL_SELECTIONS' 
 tables selopt = %selopt 
 changing rtmode = %rtmode. 
endif. 
 
call function 'RSAQRT_INIT_TEXTHANDLING' 
 exporting class = 'CL_TEXT_IDENTIFIER' 
 wsid = 'G' 
 infoset = 'REQUETE_EBELN'. 
 
if %rtmode-no_authchk = space 
and ( %rtmode-pack_on = space or %rtmode-first_call = 'X' ). 
refresh %auth_tabs. 
append 'RBKP' to %auth_tabs. 
append 'EKBE' to %auth_tabs. 
append 'EKKO' to %auth_tabs. 
call function 'RSAQRT_AUTHORITY_CHECK' 
 exporting 
 auth_tabs = %auth_tabs 
 auth_clas = 'CL_QUERY_TAB_ACCESS_AUTHORITY' 
 changing 
 rtmode = %rtmode 
 exceptions 
 NO_AUTHORIZATION = 1. 
if sy-subrc = 1. 
 raise no_authorization. 
endif. 
endif. 
break-point. 
 
data: %l_no_further_fetch type flag, " stop fetching 
 %l_hits_cnt type i. " cnt for %dbtab entries 
 
 if %rtmode-pack_abort = 'X'. 
 if not %dbcursor is initial. 
 close cursor %dbcursor. 
 endif. 
 exit. 
endif. 
 
if %rtmode-pack_on = space or %rtmode-first_call = 'X'. 
 if not %dbcursor is initial. 
 close cursor %dbcursor. 
 endif. 
 open cursor with hold %dbcursor for 
 select RBKPBELNR RBKPRMWWR RBKPWAERS RBKPWMWST1 EKBEBELNR EKKOEBELN 
 from ( RBKP 
 inner join EKBE 
 on EKBEBELNR = RBKPBELNR 
 inner join EKKO 
 on EKKOEBELN = EKBEEBELN ) 
 where RBKP~BELNR in SP$00001 
 and EKKO~EBELN in SP$00002 . 
endif. 
 
if %dbcursor is initial. 
raise cursor_not_open. 
endif. 
 
while %l_no_further_fetch = space. 
 fetch next cursor %dbcursor 
 into (RBKP-BELNR , RBKP-RMWWR , RBKP-WAERS , RBKP-WMWST1 , EKBE-BELNR , EKKO-EBELN ). 
 if ( ( %rtmode-acc_check = 'X' and 
 sy-dbcnt > %rtmode-acc_number ) 
 or sy-subrc <> 0 ). 
 %l_no_further_fetch = 'X'. 
 else. 
 check SP$00001. 
 check SP$00002. 
 call function 'RSAQRT_TEXTFIELD_REFRESH'. 
 %dtab-BELNR = RBKP-BELNR . 
 %dtab-RMWWR = RBKP-RMWWR . 
 %dtab-WAERS = RBKP-WAERS . 
 %dtab-WMWST1 = RBKP-WMWST1 . 
 %dtab-WAERS001 = RBKP-WAERS . 
 %dtab-EBELN = EKKO-EBELN . 
 append %dtab. 
 %l_hits_cnt = %l_hits_cnt + 1. 
 if %rtmode-pack_on = 'X' 
 and %l_hits_cnt >= %rtmode-pack_size. 
 %l_no_further_fetch = 'X'. 
 endif. 
 endif. 
 endwhile. 
 
if %l_hits_cnt = 0. 
 if not %dbcursor is initial. 
 close cursor %dbcursor. 
 endif. 
 raise no_data. 
 endif. 
 
if %rtmode-pack_on <> 'X'. 
 close cursor %dbcursor. 
endif. 
read table %dtab index 1 transporting no fields. 
if sy-subrc ne 0. 
 raise no_data. 
endif. 
 
endfunction.
 
if i can write this code on the sq02, where i must write this ? DATA ? INITIALISATION ? START-OF-SELECTION ?
Thank u very much for your help !
Edited by: missmiss25 on Oct 23, 2009 10:09 AM

Info set query condition

we have a infoset query to generate a list of parked logistic invoices, we use the same vendor and the same T-code : MIR7 to generate park document, but I can see only the park documents generated by my collegue throgh this info set query.
I can't see the park documents generated by me throgh this info set query, we are using the same T-code MIR7 and same query.
why this happen? Is someone set the condition of this query, so i can't see the parked document generate by my self. I can see these parked document(both my collegue and mine) through MIR6

any idea from query design point of view? thanks

Re: Info set and query transport under same request number

Hi,
I would like to know the details about info set and query transport from development to quality using SAP Query: Trnasport tool.my quesion is,
Can i create all info sets and related queries under same request number or will it be created in diffrent request numbers?Please respond any body to my question.
Regards,
Suresh Kumar.

No it is possible as per SAP.
Please read follwoing help-
http://help.sap.com/saphelp_nw70/helpdata/en/e3/e60138fede083de10000009b38f8cf/frameset.htm
It is talking abou the Special Features of InfoCubes in InfoSets.
For queries based on an InfoSet with an InfoCube, the system decides at runtime whether aggregates can be used for the InfoCube. This is the case if all the required InfoObjects of the InfoCube exist in an aggregate. The following InfoObjects are required:
The key figures of the InfoCube selected in the query
The characteristics of the InfoCube selected in the query
The characteristics required for a join with other InfoProviders in the InfoSet.
Furthermore, as a prerequisite for using aggregates, all the data required by an InfoCube must be readable using logical access. For an InfoCube within an InfoSet with InfoCubes, it is no longer possible to read part of the data from one aggregate and part of the data from another aggregate or the InfoCube itself.

Custom fields of standard info types to be included in Info set query

Hi All,
I want to understand if the following scenario is entirely a fucntional config or ABAP efforts are also required.
A standard info type is already included in the Info set. But the (Z fields) in the Additional fields column of the IT are not visible in Info set for the respective info type.
I understand, with T-code SQ02 infotypes can be included in the existing info set, but not aware about the Z fields of a Standard Infotype.
Hence, please let me know, if there is any config which is required, so that they are reflected in Info set.
Thank you in Advance.
Regards
Simran

Make sure you have the infoset in edit mode.
if it is correct you see the addtional fields in the left half of the screen at the infotype.
Select the field group on the right half of the screen, go to the left half of the screen, select the field you want to add to the fieldgroup with right mouse click and select 'add field to fieldgroup'
good luck
Theo

How to set execution preferences between Data Objects

Hi Experts,
I have 2 data Objects(one Bidrectional and another Upload Only) in my SWCV and according to my requirement i have to execute first DO(Bidirectional) before execution of Second DO(Upload Only).
Is there any way so that i can set execution preferences between these two DOs.
Regards,
Abhishek

Hi Liji,
Execution preference is more related to the "Semantic Compression" capability of the application/framework than the "backward compatiblity" with 04/04s.
Whenever the semantic compression is enabled, sync order has to be present for the set of data object to ensure the correct order of the data going to the server.
As all the backward compatible applications are "Semantic compression enabled" this option is mandatory for those applications.
But non-backward compatible applications might also want to use "semantic compression" feature to reduce the traffic over the network. In this case, those applications will also need this feature. Hence this feature of settting the sync order is available for all the SWCVs.
Regards,
Ramanath.

Data comparision bt BW and R/3: Extractor using Info Set

Hi,
We have a data source which is created on a R/3 Info Set. When we go to R/3 Info Set, it is using a structure.
Now users are complaining about the data mismatch bt R/3 and BW. I am not sure how to check the R/3 data here.
I went to SQ02, but there it is giving the structure name. I am not sure how to check the data here. Any inputs will be helpful.
Thanks,
Vishnu

Hi
You can test data between BW and R/3.
How many fields being used on infoset? Just check the entries from both tables and check against BW system.
Regards,
Chandu.

Project info setting vs. preference setting--which wins?

I just noticed for the first time after burning hundreds and hundreds of discs that my project info setting was on best performance not best quality. As this project is more that 65 minutes plus menus, I chose best quality in preferences. But my project info panel says the project is best performance.
Which am I using? By the way, the dvd looks great on television, so I don't want to change anything. I just want to know, for future reference, exactly what I am doing.

Thanks, guys. That makes sense.
A follow-up question regarding project info. I understand that 60 minutes was the standard limit for best performance. After that, it was recommended to use best quality. I assume that since my project looks very nice on best performance and is over the limit as far as minutes are concerned, the real deciding factor seems to be gigs of info in the project, not minutes. According to the bar in project info, the project, including menus, is using 3.8 gigs, which means I am safe to use best performance. Am I understanding that correctly?
Second, have you noticed a significant jump in quality when going from best performance to professional quality in idvd 8/9? Others, I thought, had not seen so great a difference.
Finally, if I did upgrade to ilife 09 and Snow Leopard, I would want to continue using imovie 6.03, as three years of work resides in imovie 6. What would happen to my projects upon loading those upgrades?
Thanks!

RE: Authority checks included in the info set of the query

Hi all,
I am checking the program code for one of our custom tcodes and i asked ABAP team to add authority check to the program code because there is no auth check in the code and abapers told me that the authority check is included inside the info set of the query and not in the program . the program is used to execute the query in the Tcode.
how to find the Authority checks included in the info set of the query.
Thanks in advance,
Sun.

If you have the BI support roles assigned to you and the security admin roles please login to the BI system
execute transaction RSECADMIN, click on the analysis tab and execute as the user who is assigned the role with restrictions.
For variables in authorizations like ( type customer exit )
use RSECADMIN - maintain authorization tab - Click on value authorization tab.
Keytransaction is RSECADMIN & infoobject maintenance details you can get from RSD1.
Regards

Navigational attr in info-set.

Hi Expects,
I am using BW3.5
I want display attribute as navigation attribute, so that i can restrict some of the conditions in the query designer,
For this,
1) first i checked in the master data object whether it is navigation attribute or not, i found that it is a navigation attribute
2) Then in the ods i have swicted on i.e. the check box is checked, in the folder NavAttribute. and activated the ods.
3) In the info-set, the field is not available.
If i create report on ods, in report level the object is available, but if i create report on info-set the object is not available.
So to available the object in the report level by creating on info-set. i need to do any settings in info-set level if so please tell me step by step.
Thanks and regards,
Sagar.

Hi All,
Thanks to all to your time.
The issue was resouled, i have added master data object in the info-set.
Thanks and Regards,
Sagar.
Edited by: Sagar Venkata on Oct 20, 2008 3:50 PM

Info-set Execution

Similar Messages

Maybe you are looking for