Info source mapping

Hi,
I have activated the 2LIS_11_VASTH info source and found that the these fields are not mapped.
Confirmation Status               -     BESTK
Billing Status ( order-related billing documents)    -     FKSAK
Billing Status               -     FKSTK
Overall processing status of documents       -     GBSTK
please help.
Thanks,

Hi Kim,
You can map GBSTK with InfoObject 0BVTSPRSTAT.
You can check in table RSOSFIELDMAPSH for the mapping of fields.
The other fields doesn't have InfoObjects mapped.
Check this:
0SPL_CFSTAT for Confirmation  Status
Hope this helps.
regards,
Diego

Similar Messages

  • While creating Update rules -"Error Info source does not exist"

    While creating an update rule I am getting an error that Info source doesnot exist though the inf source is active.
    here is error:
    No communication structure exists in version  abc...   A
    Message no. RSAU251
    Diagnosis
    In order to be able to maintain the update rules an active communication structure must be available.
    Procedure
    This error message can have two causes.
    No active communication structure exists.
    Activate the communication structure in the Data Warehousing Workbench.
    No communication structure exists for the InfoSource.
    Create a communication structure in the Data Warehousing Workbench for the InfoSource.
    <<text removed>>
    Thanks,
    Vasu
    Edited by: Matt on Apr 26, 2010 9:31 AM

    Hi Vasu,
    as it clearly shows below message
    No communication structure exists for the InfoSource.
    Create a communication structure in the Data Warehousing Workbench for the InfoSource.
    Create an info source first and assign it to your datasource and map the fileds in transfer rules and activate it.
    Then try to create the update rules between your target and info source.
    Hope this helps.
    Regards,
    Reddy

  • Why do we need info source in bi 7.0?

    hi friends,
    in bi 7.0 we have data source and make transformations. here why they gave again info source?
    Thanking u
    suneel.

    Hi,
    in case you are loading the data into different targets, you can do the common coding, mapping, conversions from ds to is. Your transformations from is to target will then be easier to maintain and you only have to do some individual (data target related) stuff in there.
    regards
    Siggi

  • INFO SOURCE in BI 7.

    hai friends,
    I'm new to BI 7.. UP TO BW 3.5 we are using infosource .. but with out infosource also we can upload the data into data targets in BI 7.0
    then ,what is the use of INFO SOURCE in BI 7.0
    could u plz tell me the situation .. that where we can use this infosource in latest version.
    thanks
    @jay

    Hi
    The decision to use an InfoSource depends on how the effort involved in maintaining the InfoSource and any potential changes in the scenario can be minimized.
    1. Data Flow Without an InfoSource:
    The DataSource is connected directly to the target by means of a transformation.
    Since there is only one transformation, performance is better.
    However, if you want to connect multiple DataSources with the same structure to the target, this can result in additional maintenance effort for the transformation, since you need to create a similar transformation for each DataSource.
    You can avoid this if the DataSource is the same, it just appears in different source systems. In this case, you can use source system mapping when you transport to the target system so that only one transformation has to be maintained in the test system. The same transformation is created automatically for each source system in the production system.
    2. Data Flow with One InfoSource
    The DataSource is connected to the target by means of an InfoSource. There is one transformation between the DataSource and the InfoSource and one transformation between the InfoSource and the target.
    We recommend that you use an InfoSource if you want to connect a number of different DataSources to a target and the different DataSources have the same business rules. In the transformation, you can align the format of the data in DataSource with the format of the data in the InfoSource. The required business rules are applied in the subsequent transformation between the InfoSource and the target. You can make any changes to these rules centrally in this one transformation, as required.
    3. Data Flow with Two InfoSources
    We recommend that you use this type of data flow if your data flow not only contains two different sources, but the data is to be written to multiple identical (or almost identical) targets. The required business rules are executed in the central transformation so that you only have to modify the one transformation in order to change the business rules. You can connect sources and targets that are independent of this transformation.
    Hope it helps
    Thanks
    Teja

  • How to add a field in Info Source

    hi,
    I have added an extra field in extract structure at R/3 and successfully replicated to BW.
    Can anyone pls tell me how to add an extra field (info object) in info source (transfer structure and Transfer rules) and ODS.
    pls explain step by step.
    regards,
    Avneet

    Hi,
    To add the field
    1) goto the RSA6 double click on it
    2) double click on the extract structure
    3) u will get ur extract structuter then u can see the append structure at the top left click onit
    4)give the name of the structure..
    5) enter the NEW field startign with "Z"
    6) Save it
    7) Go to Cmod and then create a project
    8) the assign components as EXIT_SAPLRSAP_002 (for trasaction data)
    9) Go inside the include adn srite a code to fill the values to ur NEW field from the table u wnat move
    10) save the code and activate it
    11) Go to RSA3 and test the extractor
    12) check ur NEW field is there or not (if u dont find ur field go to rsa6 adn double click ur DS and then see that there is a HIDE mark i schecked or not)
    13) if everything looks fine from R3 side
    14) then Replicate the data source in BW
    15) u will find the new fild in the Trasfer structure
    16)assign to the IO which u want to mapp.. adn Activate it
    17) Add a new IO in Cube
    18) check all ur Update rules to map to fill the new IO from R3
    19) The Load the data to Cube
    Hope it helped
    Thanks
    DST

  • How to load data into an ods from multiple info sources.

    hi all...
    i am given a task to load data into an ods from 3 infosources ...
    can someone plz give me the flow .
    thank u in advance..

    Hi Hara Pradhan,
    You have to create 3 update rules by giving the 3 different infosources while creating each update rule. And u have to create the infopackages under each infosource. with this u can load the data to the same data target from multiple info sources.
    Hope it helps!
    Assign points if it helps!

  • Use of info source in BI 7.0

    Hi,
           Please priovide me the informations
    1) why info source is using in BI 7.0 while corporate memory is in the flow?
    2) expert routine is using when our requirement was not satisfied with the standard rules, transformations. i want to know which routine is gud and advisable to use?
    a) Start Routine or
    b) End routine    or
    c) Trasnformation groups or
    d) Expert routine
    3) how do we select the DSO out of three? on which basis we want to choose and is delta is capable for all?

    Hi,
    The only reason to use a infosource in the 7.0 dataflow, is when you want some automatic conversions for time chars to happen .. if u r deriving the same on last level(cube), you would never need a infosource in between.. even though u have it ... as others mentioned there aint gonna be any considerable performance issue coming to load performance, coz u have a additional transformation.
    Check these docs. They give a detailed explanation of how-to-do routines in BI7.0
    [https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/e73bfc19-0e01-0010-23bc-ef0ad53f2fab]
    [https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/fc61e12d-0a01-0010-2883-e2fc63ef729b]
    Routines in new BI 7.0 version:
    [http://help.sap.com/saphelp_nw04s/helpdata/en/e3/732c42be6fde2ce10000000a1550b0/content.htm]
    Regards,
    NR

  • Info Source 80FIGL_O06 is not defined in source system

    Hi BW Experts,
    When I am trying load data from ODS to Cube, I am getting a error messgae stating:
    Info Source 80FIGL_O06 is not defined in source system
    Error in Source system
    This is an urgent issue. Please let me know if you have any suggestions...
    Regards,
    Reddy.

    You can do this 2 ways. Right click on the ODS and say generate export datasource. The datasource will start with 8... and you can find that under Datamarts in RSA1-> Infosource. You can then create an infopackage and load from ODS through the update rules. You have the option of full load or delta load.
    The other way you can go about this is again right click on the ODS and say update to data targets and just follow from there.
    Did you follow the above steps? Where exactly is your problem?

  • 'Select a measure:' stuck on 'Loading...' in Dashboard Designer KPI Dimensional Data Source Mapping

    [using SharePoint 2013 Enterprise SP1]
    I am trying to create a KPI in Dashboard Designer, but am getting a timeout. I have been doing this for a while on my site; this is not the first. I haven't had this problem before.
    I created a new KPI and clicked on the Data Mappings column value, which is a hyperlink, to bring up the Dimensional Data Source Mapping dialog. I switched to a Data Connection in the site I just created (DC works perfectly and can retrieve sample data).
    When I click the "Select a measure:" drop-down menu, I get the message "Loading..." and after a while (a minute? two?) a dialog pops up with:
    The request took too long to complete. SharePoint is currently unavailable or experiencing heavy traffic. Try again later.
    This is a test SP server and I'm the only one on it, so there is no load. Also as mentioned, I am able to verify the Data Connection without problem. I am not having any issue with any of my other few dozen KPIs/Data Connections. Any suggestions as to how
    to troubleshoot?

    Hi cgtyoder,
    According to your description, my understanding is that you got an error when you created a KPI in Dashboard Designer.
    Please try to recycle the PerformancePoint Services Application Pool account, compare the result.
    Please go to C:\inetpub\wwwroot\wss\VirtualDirectories\the port of web application, adjust the HttpRuntime executionTimeout for the Web Application by modifying the web.config, now PerformancePoint report stability is much better:
    <httpRuntime executionTimeout="600" maxRequestLength="51200" />
    Note: before you change the web.config file, please make a bakcup for the file.
    If this issue still exists, please go to the log file to find more information about this issue.
    I hope this helps.
    Thanks,
    Wendy
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Wendy Li
    TechNet Community Support

  • Split Source Mapping Generation Task

    Hi
    I created a Dynamic Web Project in IBM Rational Application Developer Version 8. I am using BEA Weblogic 10.0.2 as the Application Server. When creating Dynamic web project, I added project to an EAR and named it testEAR. The project compiles without any errors and EAR is generated. When I try to add it to my server and deploy, I get the following error.
    Runtime exception occurred in publish task 'Split Source Mapping Generation Task'.
    Path must include project and resource name: /testEAR
    I checked web.xml for duplicate entries and didnt find anything. Below are my XML files for Deployment Assembley. The first is for the testEAR project
    <?xml version="1.0" encoding="UTF-8"?><project-modules id="moduleCoreId" project-version="1.5.0">
    <wb-module deploy-name="testEAR">
    <wb-resource deploy-path="/" source-path="/"/>
    <dependent-module archiveName="XYZ.war" deploy-path="/" handle="module:/resource/XYZ/XYZ">
    <dependent-object>WebModule_1308854753228</dependent-object>
    <dependency-type>uses</dependency-type>
    </dependent-module>
    </wb-module>
    </project-modules>
    The second is for the Dynamic Web Project
    <?xml version="1.0" encoding="UTF-8"?><project-modules id="moduleCoreId" project-version="1.5.0">
    <wb-module deploy-name="XYZ">
    <wb-resource deploy-path="/" source-path="/WebContent"/>
    <wb-resource deploy-path="/WEB-INF/classes" source-path="/src"/>
    <property name="context-root" value="XYZ"/>
    <property name="java-output-path" value="/XYZ/WebContent/WEB-INF/classes"/>
    </wb-module>
    </project-modules>
    Please let me know how to resolve this problem.

    Hi,
    This failure occurred probably because a Content Directory was not specified for the EAR project.
    If a Content directory is not specified, then ".settings" and ".project" files will be part of the source path for the bea compiler.
    As per the requirement, it is very important that WLS build scripts parse/compile and copy all the contents of the source folder.
    So, as per the process the ".settings" directory and the ".project" directory are also copied into the temporary build directory.
    This causes the failure during deployment as ".settings" and ".project" components can't be deployed.
    The Content directory is a requirement only in WLS environment, due to the build logic of WLS.
    By default, the WLS Eclipse tasks create a Content directory for a EAR project. So, this is not documented.
    But, when you import an existing EAR directory, this limitation is exposed.
    Creating the EAR Content folder should be the best solution.
    Steps to modify imported applications:
    1. Create a directory for the EAR content (for APP-INF, META-INF and all other modules or files that are part of the EAR) and copy all the files (except ".settings" and ".project") into the EAR content directory. (This has to be performed in windows explorer)
    2. Then edit the file .settings/org.eclipse.wst.common.component EAR content directory reference for deploy-path:
    For eg:
    <wb-resource deploy-path="/" source-path="/"/>
    to
    <wb-resource deploy-path="/" source-path="/EarContent"/>
    3. Refresh the eclipse project.
    4. Delete the temporary project folder that is created in the below location:
    <Workspace Home>\.metadata\.plugins\org.eclipse.core.resources\.projects\
    For eg:
    cd D:\Cases\EclipseWorkspace\.metadata\.plugins\org.eclipse.core.resources\.projects\
    del WebTestEAR\
    ** This is a temporary folder which will be created by WebLogic build scripts during
    deployment. **
    5. Now, try to deploy the EAR project.
    Hope it helps.

  • How to find Info Source for Export Data source in Data Marts node

    Hi
                  I need to load data from ODS to Info Cube. I created the Export Data source for the ODS. I can see the Export Data Source but in the Data Marts node of Info Source i cannot find the Info Source for the Export Data source i created. I replicated Data sources in the BW source system. I also tried to use Insert Lost Nodes from the Context Menu of the InfoSource node but nothing worked. Please let me know what i need to do to see the Info source in the Data Marts.
    Thanks
    Padma

    In the infosource tab in RSA1 - use settings --> display generated objects
    you will be able to see the datamart infosources..

  • INFO SOURCE  in BI 7.0

    hai friends,
       I'm new to BI 7.. UP TO BW 3.5 we are using infosource .. but  with out infosource also we can upload the data into  data targets in BI 7.0 
    then ,what is the use of INFO SOURCE  in BI  7.0
    could u plz tell me  the  situation .. that  where we can use this infosource in  latest version.
    thanks
    @jay

    Hi,
    The only reason to use a infosource in the 7.0 dataflow, is when you want some automatic conversions for time chars to happen .. if u r deriving the same on last level(cube), you would never need a infosource in between.. even though u have it ... as others mentioned there aint gonna be any considerable performance issue coming to load performance, coz u have a additional transformation.
    Check these docs. They give a detailed explanation of how-to-do routines in BI7.0
    [https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/e73bfc19-0e01-0010-23bc-ef0ad53f2fab]
    [https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/fc61e12d-0a01-0010-2883-e2fc63ef729b]
    Routines in new BI 7.0 version:
    [http://help.sap.com/saphelp_nw04s/helpdata/en/e3/732c42be6fde2ce10000000a1550b0/content.htm]
    Regards,
    NR

  • Data Source And Info Source

    Hi Experts
    Can anyone tell technical difference between data source and info soure ? Where data source will be and where will be info source .
    Kumar

    Hi Kumar,
    DataSources include extraction source structures and transfer structures. Data is staged in the extraction source structure and the transfer structure, and transferred into the BW system by ALE or tRFC.
    An InfoSource is always a quantity of  Info Object that logically belong together. The structure in which these are stored is called a communication structure.
    There are basically two types of InfoSources.
    InfoSources with flexible updating
    Info Sources with direct updating
    suresh

  • Error when acivating Info Source

    Hi
    I get an error when I try to activate an info source 0TRANSTYPE. It activates fine on BW dev. Transports fine to BW QA, but gives an error on BW prod.
    The error it gives me is :
    u2022 Error when creating transfer structure /BIC/CCLC0TRANSTYPE_ATTR in source system 90
    I did try to reactivate the DataSource   on the source system.
    I also replicated the DataSource  in the BW system and ran RS_transtru_activate_all after the transport to our BW Production system. But no luck.
    The thing is, it works fine on the Development and QA servers.
    Do you have any suggestions on what else I can do?
    Much appreciated.

    Hi Arun
    Thanks for getting back to me.
    1) Both the QA and Prod system changeability is the same( This is the only infosource that I get this message with).
    2) I also did a replicate an the source is visible for that source.
    3) the error I get is R1304 - Error when creating transfer structure /BIC/CCLC0TRANSTYPE_ATTR in source system 90
    Regards
    Mervyn

  • Allocation of Info sources to Application Component Hierarchy

    Hi Friends,
    I have to allocate Info sources zo other nodes of application component hierarchy as they are allocated now.
    Is there a way to do this benath 'Drag and Drop' in RSA1 ?
    Or can someone tell me the name of the table where this relation is stored ?
    Thanks and regards
    Joe

    Hi,
    U just drag and drop the required ISs to the rquired application component hierarchy. I have no idea about the Table where it maintains the relation between the ISs and the application componet hierarchies.
    Hope this helps u....
    Regards
    Ramakrishna Kamurthy

Maybe you are looking for