Info Steward - BI Lineage - how is the lineage link calculated?

I have extracted metadata into Information Steward from WEBI reports and their universes as well as from the Oracle database on which the universes are built on. However, when I try to see the lineage for the WEBI report, the lineage diagram indicates that the universe objects are based on a universe on an unknown database and unknown schema. The actual message is: "Schema name: Undefined schema for database undefined connection IS-DEV3 (CMM-10099)".
My question is: what does Info Steward uses to link the metadata from WEBI and Universes to the metadata from the underlying database so it is displayed in a lineage diagram? do I need to follow any naming convention on the Universe connection or the database schema so that relationship can be identified?
Thank you,
Vicente.

That is, in BI we identify the tables that house the mapping between the source and destination data elementsa and take out this information. Then we extract the dataelement documentation by function DOCU_GET (from eCC) and use the mapping info above to link SAP BI data element with source data element documentation.
1) SAP don't supply this, I would imagine, because R/3 isn't the only possible source of data. I'm currently working on an app that extracts from R/3, an Oracle database and APO. From whence should I take the documentation for my MATERIAL info object? While being able to transfer the documentation of data elements might be very useful for your app, I can't see that generally it would be of interest to clients - I've certainly never heard of such a requirement. So, my opinion at least, it isn't a design flaw.
2) As you've pointed out, you can get the tables that do the mapping, so you know the source data elements, so you can get the documentation. I'm not sure of how to store the documentation, but the obvious candidate for a link between infoobject and dataelement would be master data of an own infoobject. You could wrap DOCU_GET in an RFC (if it isn't RFC enabled), and do a direct call between your 3rd party app and r/3 to get the documentation. For information about the mapping tables, I'd suggest asking that question specifically in one of the BI forums.
matt

Similar Messages

How are the IC's calculated in the IIR Cascade Filter with I.C. vi

How are the IC's calculated in the IIR Cascade Filter with I.C. vi

Solved this myself.
Attached llb has subVI that computes the IC's needed to remove transient given a constant value step input to the IIR Filter.
Computes filter state (see app note 39) for cascade filter using z-transform final value theorem.
This version works for all filter types, ie lowpass, highpass, bandstop and bandpass.
Attachments:
IIR_Filter_with_I.C._set_to_Final_State.llb ‏94 KB

How discover the direct link of my book published while I had not received an email from Apple ?

How discover the direct link of my book published, while I had not received an email from Apple ?

You are most welcome
Good luck in the store.
Ken

How is the Hardware ID calculated?

I thought it used to be written down somewhere but I can't seem to find it...is there a writeup on the method for calculating the Hardware ID in ConfigMgr?
SELECT Hardware_ID0 FROM dbo.v_R_System
John Nelson #2

Hmm, well it's not official and it was 2005...but it's something:
http://myitforum.com/cs2/blogs/eholtz/pages/2839.aspx
The HardwareID is a new discovery property that is made up of:
The serial number & asset tag from system enclosure (taken from the WMI Win32_SystemEnclosure class)
The serial number of the motherboard (taken from the WMI Win32_Baseboard class)
The serial number of the BIOS (taken from the WMI Win32_BIOS class)
If the computer is not a laptop, the MAC address from first enabled adaptor (Win32_NetworkAdaptorConfiguration) is also used.
John Nelson #2

How is the font size calculated in pixel sized documents?

Hello to all,
I am working with Illustrator CS4 on a web design. In the document setup, I set the size to 1000*1600 pixels. Then, I tried to add some text in font size 12 pt. The font appears *very* small. My objective was to use the same font size settings in my Illustrator file as I will later do in the HTML/CSS coding. How do I get Illustrator to scale the fonts in the same way as the browser does - i.e. a 12 pt text in the browser has the same size as a 12 pt text in Illustrator? Infact, I am looking for a setting where I can define the resolution of text size calculation.
Best regards
Joerg

Illustrator is a print-oriented, object-based vector drawing program, not a web-oriented, pixel-based raster painting program.
Illustrator's ruler is designed to represent real-world measure, not counts of pixels.
A pixel is not a measure. Pixels have no real-world measure.
Therefore, when Illustrator's ruler pretends to represent "pixels," it has to assign some real-world scale to them. It defaults to the measure of a point. A point is a real-world measure.
Similarly, a computer's operating system has to decide how many screen pixels it will use to represent a real-world measure at 100% zoom.
Mac OS defaults to using 1 pixel to represent 1 point. (72 PPI)
Windows and web browsers default to using 1.33 pixels to represent 1 point. (96 PPI)
So tell a browser to display 12 point type, and it will use 16 pixels to do that.
Given Illustrator's default that 1 pixel measures 1 point at 100%, Illustrator uses about 9 pixels to render the cap height of 12 point Verdana.
GIven the browsers' default that 1 point renders to 1.3 pixels, the browser uses about 12 pixels to render the cap height of 12 point Verdana.
So given that Illustrator and the browser are going to use different numbers of pixels to rasterize 12 point type, how do you get a browser to use the same number of pixels to render 12 point Verdana as Illustrator does? Simple: Specify the type size in the HTML code by pixels, not by points. This is a screenshot of Internet Explorer on Windows displaying a web page which contains:
A raster image of 12 point Verdana exported from Illustrator, using its default 72 PPI rasterization
Live 12 pixel Verdana HTML text.
Live 12 point Verdana HTML text.
Inversely, there are other ways to work around Illustrator's 72 PPI default when you want to rasterize Illustrator type so that it looks the same as the same-point-size text in HTML.
When using Save For Web & Devices, specifiy 133% instead of the default 100%.
Scale the artwork to 133% before exporting via Save For Web & Devices using the default 100%
When rasterizing, rasterize to 96 PPI instead of 72 PPI. (1.33 as many pixels)
When exporting, export to 96 PPI instead of 72 PPI. (1.33 as many pixels)
Or, do what I do: Get a decent screenshot utility. When I want to rasterize something from Illustrator that contains text that I want to appear online at the same scale that it appears to me when working in Illustrator, I simply zoom to 133% and take a screenshot.
JET

Exactly how does the Dual Link plug into the 30"

Ok I keep seeing pix of this plug yet I can't get a grip in how it works.
I am assuming it works with the DVI plug that comes with the 30"
If anyone has a photo of the way it is connected I would appreciate a link. I just want to see it. Can't explain why.
I have also still been only able to find mostly complaints about the plug. Is it really that bad. I will never get the full resolution without one but it seems not worth the trouble.
Anyone with experience or knows my options would be nice to hear from as well.
Lastly this.
I if hook this up without the dual I can still use my 2nd monitor but if I ever use a dual-link will I need a 2nd video card to keep my 2nd monitor running.
I assume yes using common sense but I haven't seen the setup.
Thanks a lot

Well that was the perfect answer. I never read that about the plug but now it makes sense why it looks the way it does in the pix.
I always thought it had 2 ins and 1 out. I mean it does but just in one plug.
I would still like to know if they are still junk. Do they still flicker and work bad.
30" in pointless without the resolution.
I use a 32" but it only goes to 1378 because it is a 720P and everything still gets in the way so that is why I also have my 24" running.
I do a lot of multiple tasks and like to look at one thing while doing another. Putting my word docs to the left and copying and pasting into quark but I like to see the formatting without having to look under the files to see what is bold, etc.
Well until I know about the plug there is NO WAY I am spending $100 for junk. I know Apple will say they are fine and I am sure there are people who's work perfect.

How is the disposable net calculated for garnishment?

Hi experts,
In IMG, I tried to create new adjustment model for diposable net.
But I found out some entries are there trying to substract the
amount paid for other garnishment (such as child support).
So suppose I have two garnishments, one is Child support, another
is creditor. While when I was doing test I found out even the
wage type for the Child support wage type is put in the model as
deduction to calculate the creditor garnishment, it is actually
not substracted during payroll process.
Could anyone tell me how should this work?
Thank you very much.
Regards,
Johnson

Thank you Aniket. Just got time to test this.
In my test, the 'take home pay' is not deducted to zero or negative even both garnishments are fully deducted. The child support garnishment wage type is still not included in calculating creditor's disposable net. I checked processing class 59 for the child support garnishment wage type and it is set to 4. Everything looks ok, what could be the problem here?
Thank you and have a wonderful holiday.

How identify the table links

hi,
i am using the tcode FB09.
      doccu number : 44444
      company code : aaa
      fiscial year   ; 2007
click G/L acc t :
in the next screen in getting vendor number:(lfa1-lifnr).
can u tell how can i fetch the LIFNR using the docc number,Comp code, Fiscial year...
plz urgent ...
with table links ...
ur rewarded
vinoth.v

Please check the reply on other thread and kindly do not open duplicate threads on the same topic. Close one thread to avoid confusion and proceed with the other should you need clarifications.

How is the object link populate into work order - IW31

Hello,
I am new in PM and am in the process of trying to picking up the concept.
Question:
When I create a maintenance order (IW31), how are all the relevant data being pull out and populate into the work order?
For example,
The maintenance plan includes functional area and equipment object, material objects, and task list object.
Next, you have the equipment master, which also includes the task list, and functional location.
Finally, you have the task list which includes the Maintenance BOM component.
Hence, when I create the PM order via IW31, how are all those object information pull out and import into the order? What is the sequence? I am confused on this.
Thanks
Daniel

Daniel,
When the work order is created from the maintenance plan it copies the maintenance item data into the order e.g. Floc, Equipment, Order Type, Main Work Centre, Priority, etc.
The operations for the order are determined from the task list assigned to the maintenance item dependent upon the rule governed by the maintenance plan type (performance, strategy,etc).
PeteA

VKM4- How does the Credit Value calculated?

Hello SD Experts,
See below VKM4 screenshot what is the significance of credit value? How does it calculated. How can i get the calculation of credit value for a sales order? I know net value is taken from items net value minus taxes.
This is what F1 help shows but i could not get it how it arrived to the Credit value figure.
F1 Help
Credit value
Specifies the value of the open items.
In the order, this value is
the quantity not yet delivered
the quantity not yet billed
In the delivery, this value is
the quantity not yet billed
If anyone can explain me where can i track/see the values tied to sales order it will be great.
Thanks
Hrusikesh

Dalai,
In V/08 please check for the relevant pricing procedure, usually we assign Subtotal A for the total amount of Net value+Tax .

How is GC cpu utilization % calculated?

I am trying to find a way to capture the problem where a user process eats up a ton of cpu for over 30 minutes. I thought that I could possibly use the cpu utilization metric.
In testing it, I reset the values to warning and critical thresholds to 0 and 5% respectively to see what would happen. I was emailed with the expected critical alert. In looking at the top sessions on the server, I noticed that 1 session was eating up 100% of one cpu (which I want to know about) but the alert email said that 45% was utilized which I noticed was about what the user load is on the server.
Initially, I had the warning and critical threshold set to 85 and 95% respectively but did not get any warning about a user process that was taking up 100% cpu for > 5 minutes (in which the 5 minute collect times were set to once).
My questions are
1) How do I capture a single process eating up > 90% cpu in a multi-cpu environment
2) Is the cpu utilization % capturing the Average Load of the cpus on the server and alerting when it's above the critical threshold?
3) How is the cpu utilization % calculated?
Help would be appreciated.

The cpu load is determined by running the Grid program nmupm found in $AGENT_HOME/bin
The output is like:
dbc12ykf: PDBGRP> nmupm osCpuUsage
em_result=1|206331806.000000|201540370.000000|102524043.000000|958620752.000000
em_result=2|212731589.000000|201203614.000000|67775500.000000|948506267.000000
em_result=3|212402913.000000|230642957.000000|76833167.000000|917779040.000000
em_result=4|242543014.000000|367865067.000000|81554006.000000|791426607.000000
You will get a line for each cpu.
YOu'll need a bit of reverse engineering to figure out the columns - I think they are user, system, idle , 5min avg - Multiplied by 10000 ?
Now to capture a big one - I think you will need a user defined metric. Just write a simple shell script to run the above command, and evaluate the numbers coming thru.

Is there another way of getting apps from the appstore without putting your credit card number in, ive heard about the itunes gift card thing can anybody just give me more info about that and how i can buy free things free things from the appstorepls help

Is there another way of getting apps from the appstore without putting your credit card number in, ive heard about the itunes gift card thing can anybody just give me more info about that and how i can buy free things free things from the appstore...pls help as im only a teenager and have no credit credit and my parents dont trust me with theres and they dont care about the fact that you can set up a password/.... PLEASE SOMEONE HELP I WILL BE SO GRATEFUL... And i would really like to get the iphone 4 but if there is no way of etting apps without your credit number then i would have to get a samsung galaxy s3 maybe ...

You can set up an Apple ID without a credit card.
Create iTunes Store account without credit card - Support - Apple - http://support.apple.com/kb/ht2534

HT1918 i have recently moved from the uk to australia and cancelled my uk debit before the payment was processed for songs i bought in itunes. i have tried to edit my billing info with australian debit details but the site says 'invalid card' how can i fi

i have recently moved from the uk to australia and cancelled my uk debit before the payment was processed for songs i bought in itunes. i have tried to edit my billing info with australian debit details but the site says 'invalid card' how can i fix this?

Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact

HT5925 I have an iCloud email on my iPhone that is now old as hacked and unused. I can't access anything as it asks for that account info and I don't remember the password etc. How do I delete it and replace it with my new iPad email? ! Help..

I have an iCloud email and Yahoo email on my iPhone that is now old as hacked and unused. I can't access anything as it asks for that account info and I don't remember the password etc. How do I delete and replace it with my new iPad email? ! Help..

Welcome to the Apple community.
If you are unable to remember your password, security questions, don’t have access to your rescue address or are unable to reset your password for whatever reason, your only option is to contact AppleCare(or Apple ID Support), upon speaking to an operator you should explain that your problem is related to your Apple ID, this way you will not be charged for assistance, even if you don’t have an AppleCare plan.

I lost my iphone in the water I bought a new one 4S now I have 2 back ups in Icloud, the one for the new Iphne and the old Iphone where I have the most info I need. How I can download my old backup?

I lost my iphone in the water I bought a new one 4S now I have 2 back ups in Icloud, the one for the new Iphne and the old Iphone where I have the most info I need. How I can download my old backup?

Welcome to the Apple community.
You cannot download a backup from iCloud, the only way to access it is to restore to the backup with your new phone, which you should have done when you first connected it. If you restore now, you will lose all the new information you have added to your new phone.

Info Steward - BI Lineage - how is the lineage link calculated?

Similar Messages

Maybe you are looking for