Info Type 0008 Displaying EUR

Hi All,
          I am getting an error while maintaing INFO TYPE 0008 its displaying EUR in the currency field instead of INR.  Also in T510 table (Revised Pay scale groups and Levels its showing EUR instead of INR in the currency field.
I have checked this table  V_T510F_B for currencies, INR is there and for Company code, Personnal Area INR is there.
Please help me out to resolve this error.

Hi Nitin,
   I made all the changes as mentioned in the thread.
These are the list of tables I made changes in the currency field from EUR to INR.
v_t001p, v_t520m, v_curc, v_510f_b, t500w_change, t500c, t500p, t510h.
Then also my problem did not get solved. is there any other way??? to sort out this...
Thanks and Regards
Ravi Narayan Padhi

Similar Messages

  • Archive Employee for Info type 0008

    Hi Experts.
    I have a requirement liek, i need to archive the personal number for info type 008.
    We have an Object PA_LDOC. The write program is RPAR3W00.
    I need to modify the write program, which should accept the data from flat file to create the record and archive the created record for Info type 008.
    Please let me know how can i go a head, since i dont have parameters for personal number and infotype in the selection screen.
    Thanks,
    Sriram.

    Hi Srini,
    Thanks for your prompt reply.
    I have one question.
    Can i use RPAR3W00 to archive personal number for info type 0008, If yes where can i give infotype(0008).
    and where can i pass basic pay details.
    Please suggest me on the same.
    Thanks,
    Sriram.

  • FM  to insert info type 0008 for indirect evalutaion

    Hi,
    can i use hr info type operation FM, for inserting info type 0008 because annual salary is indirectly evaluted?
    is there any other FM which does this calculation and insert info type 0008.
    Thanks,
    Kranthi.

    BAPI_BASICPAY_CREATE can be used to upload data into IT-8, where we have indirect valuated wagetypes
    Raghu

  • Table T588M for info type screen display:

    Hi Experts
    I have deleted relevant entry in in table T588M for an info type still the system shows some screen. where from does that screen come. Can anybody help..?

    As i understand, there is a screen element that you want to get it disabled but is not available in the table v_t588m. Is that right???
    If YES, the screen element/ field of your screen, for example 3000 of it0817, can be disabled from the screen layout also.
    Go to SE80 -> select the module pool mp081700 as your program -> select screen 3000 -> Click on the 'layout' in the application toolbar -> select the element and delete or change the properties, might be display properties in your case.
    Hope this helps.
    Cheers,
    LG

  • 0581 Info type

    All,
    When i am updateing info type 0581,i ended up with error as "No automatic
    updation for info type 0008 and Relevant wage types not found.
    Is this something related changes to user exits or config is missing at some where  else.
    Note: Dynamic acion is deleted for this.
    Thanks,Kiran

    Hi Shekar,
        You mean i need to update info type 0581 first and later i need to update
    0008 info type.
    When i am doing like this,it was showing an error in status bar as allowance grouping is not found.
    Method what i followed for this:-
    Intially updated list of wage components to IT0008 Like basic pay,Hra,DA,Coveyance.Later i am updateing 0581.Then i  am getting an error as
    " No Automatic updation to IT0008 and relevant wage types not found".Could you
    please mark me an email in detail to [email protected]
    Thank you,Kiran

  • Display custom info type in ESS portal

    Hi all,
    I have got a requirement that i need to display the custom defined info type in ESS portal , that info type have three  text fields.
    Is it possible to do this using a standard configuration in ESS portal or do i need to do some  development?
    Please suggest..
    Thanks ,
    Gunja

    Hi,
    You have to do custom development in NWDS. Please check the similar thread
    Customer Infotype in ESS
    Thanks
    Santosh

  • Use FM - HR_READ_INFOTYPE one time but to read mulitple Info types

    Dear All,
    I have a select-option where in users enter the Info types Numbers.
    Now I have to read and every infotype and display related data from each info type .
    I have to use FM - HR_READ_INFOTYPE  but we need to declare data for each and every infotype so I need to use this 10 times in case If I have 10 infotype.
    Is their any generlaised way exist where in I will pass the variable e.g., P0001 and build the internal table and use it for a FM. Kindly explain.
    Regards,
    Mangalagi S V

    Yes you can.
    1.) Declare fields as follows:
    FIELD-SYMBOLS <it> TYPE STANDARD TABLE.
    DATA  l_table_name LIKE feld-name.
    DATA: wa_0008 TYPE STANDARD TABLE OF p0008,
              0008_line LIKE LINE OF wa_0008.
    2)  In Step 3 I have a form that you will need to call like this:
            MOVE 'wa_0008' TO l_table_name.
            ASSIGN (l_table_name) TO <it>.
            PERFORM read_infotype USING pernr
                                        '0008'
                                        begda
                                        endda.
            wa_0008 = <it>.
    3) Your form will need to look like this
    FORM read_infotype USING pers_num
                             it_num
                             begin
                             end.
      CALL FUNCTION 'HR_READ_INFOTYPE'
        EXPORTING
          pernr             = pers_num
          infty             = it_num
          begda             = begin
          endda             = end
        TABLES
          infty_tab         = <it>
        EXCEPTIONS
          infty_not_found = 1
          OTHERS          = 2.
      IF sy-subrc  = 1.
      ENDIF.
    ENDFORM.                    " read_infotype
    You can then call your form passing different infotype numbers to it.
    Hope that helps.
    Mary

  • Types of Display

    I own a Santa Rosa Macbook Pro (Silver, 15.4" with a matte LED display). It is a year old. My screen recently started to get patches on it so I went to the Apple Care Center and got my display replaced. Now the problem I have with my new display is that the viewing angles are horrible and the color shifts are worse! I move 10 to 20 degrees to the left or right from the center of the screen and the colors change drastically.
    Looking at the inferior quality replacement display... I was happy with my earlier LED display, but I can't get that display back as it has already been shipped out of my city to get scrapped. Now my question is, does the Santa Rosa Macbook Pro come with any other type of panel (apart from LEDs)?
    I have a strong feeling that Apple replaced my screen with an Active Matrix LCD instead of a LED screen.
    I called Apple Care (India) on the toll free number and it seems that they're a bunch of illiterates because they don't know the meaning of Viewing angles & Color shifts. They actually made me go through the hardware troubleshoot & color calibrations! Its clearly an issue of the type of display that they've used and not a hardware issue.

    Ok... I just got some more info on the panel. The part number is 661-4609 and after punching in the code in the terminal I get this: LP154WP2-TLA3
    Now I think this is an LED backlit screen (which is what I require), but why am I having problems with the viewing angles on just one side? The Apple service center in my vicinity doesn't know if it is an LED or a CCFL backlit screen!! This is what happens... the moment I move 10-15 degrees to the left of the screen... the opposite end of the display darkens (as if I'm looking at a negative picture... a major color shift is noticeable) but if I move 10-15 degrees to the other side from the center of the screen... the opposite end looks perfect (no color shifts at that end). Can there be a possibility that the screen is defective? Or maybe the display connections are loose?
    I have been using this laptop since the past 18 months and I can tell that my previous screen was much brighter and had great viewing angles. It had no color shifts either. (I am a graphic designer so I know about the issues of color shifts in an LCD... I use an IPS panel at home). Also, there is a slight tinge of yellow (Even after trying all possible calibrations).
    Is there a way of finding out the part number of the screen that was in my laptop at the time of purchase? Maybe Apple has some kind of an assembly log?
    This is the serial number for my laptop: W881902myk0

  • HR PQAH (Ad hoc query) info-type filtering

    Hi,
    in our company the users can use/create HR ad hoc queries (tcode PQAH) with which they can display almost all master data employees informations.
    Is it possible to use P_ORGIN authorizations in roles in order to filter info-types in ad hoc query ?
    We have created a test user only authorized to start PQAH (on S_TCODE & P_TCODE) and he is able to create a PQAH query that can display all HR master data.
    We were expecting that P_ORGIN was also checked in PQAH.
    Any suggestion ?
    Thanks
    Andrea

    Hi Andrea,
    No, not what I said.  Employees with access to PQAH can both construct and run Ad Hoc Queries.  However, if their authorization does not permit display access to an infotype in the query, the query will not run for that individual.  If she has the proper access, then the report will run for those individuals she can view - controlled by P_ORGIN or P_ORGINCON.  If the query is saved, another employee can then run it via PQAH or SQ01.  Again, that employee's access will limit what he can see in the output. 
    So if a user has access to PQAH, that user can create and run queries, but the security authorization from P_ORGIN will determine the output.  Example:  I create a query that includes ANSAL from IT0008-Basic Pay, but I do not have P_ORGIN access to view IT0008, then the report would error out if I tried to run it.  If I did have authorization to view IT0008, I could execute the report via PQAH and receive the output.  If I save the report and you ran that same report via PQAH, but you have view authorization only for Personnel Area 0001 for IT0008, then your output would only include individuals assigned to PA 0001. 
    So PQAH can be used by various individuals what controls the output is their authorizations from P_ORGIN or P_ORGINCON and other authorization objects.
    Paul

  • HR-Personnel Development-Proficiency Level Using Info Type:24

    Hi !
    I am working on Personnel Development of HR Module on SAP 4.70 .
    I am Developing an Z Report in which I wish to display service Order with all the details & Employee assigned within it .
    I am unable to display employee with their Proficiency level.
    Proficiency level of employee is maintained via Transaction 'PA30' &
    Info Type 24 .
    Can anybody tell me how can I fetch the Proficiency Level of Person (PERNR Field ) .
    Is there any Function Module is there OR It's storing in any table?
    Regards
    Sachin S M

    Hello Sachin,
    Employee proficiency is store in IT 0024, which is table PA0024 technically. To read this you can do select statement on table PA0024 or using function module HR_READ_INFOTYPE

  • Custom field in standard info type data vanishes

    Hi,
    We have enhanced standard info type 9 & added a custom field.
    in PAI defaulting some value to this custom field.
    In PA30 when we make changes to existing records it defaults the valu in the custom field and when we save it it saves to data base.
    After some time the value in this field vanishes.
    Any idea on this?

    Hi there
    The screen of the infotype 0009 is separated in the standard screen and the customer subscreen. When the
    bank country key is changed, then the current screen has to be refreshed: this is due as the displayed screen is dependent of the country key (eg 2000 for the international screen, as example  2006 for France, etc).
    When we refresh the screen (technically a LEAVE SCREEN is done), the customer own fields are not yet passed from the screen layout to the screen logic as at the time of the refresh the customer PAI logic is not yet processed. Unfortunately this screen logic cannot be changed as this is a central place in the infotype 0009.
    Hope this would help!
    Kind regards
    Sally

  • Removing Objects O and S from info type 1000 and 1028 in Distribution model

    Hi,
    My requirement is to remove the objects O and S in distribution model from the filter group of Info type 1000 and 1028.
    After removing the objects I perform the below steps:
    1.  I send an employee (P) through PFAL.
    2.  Once the employee data is reached to receiver system, then check the employee from PA20.
    3.  From the Organization Assignment info type (0001), check whether the Org unit and Position text appears on the screen.
    Currently after removing the objects O and S, the texts do not flow. But only the org unit and postion id flows to info type 0001, not the text.
    Is there any other method or some other configuration to send the texts to the receiver system, apart from maintaining it in distribution model? We want the texts to be displayed in PA20 and PA30 screen for info type 0001 ( along with org unit and position id).
    Thanks in Advance.

    Hi,
    the text for O and S are stored in infotype 1000...so PA30 reads them from that table. So if you want to have the texts in the target system you need to send at least infotype 1000. Why don't you want to send it?.
    Regards,
    Ana

  • Best method to upload info type 8 (Basic pay)

    Hi Team,
    Could you share some information on  master data upload for info type 8.
    What is the best way to upload the master data info type 8.
    when we can GO for BDC and go for LSMW.
    Thanks in advance.
    MVR

    You can go for either, but you may need to put in some coding in the LSMW as well. Several of my projects we have always used LSMW.
    The fields in IT 0008 are shown in tabular form, but in the back end they are stored as LGA01, LGA02 etc.
    Dpedning onyour country, the employees may have anywhere between 1 and 10 wagetypes in It 0008, it is very very unusual to have more than 10 wagetypes in It 0008,
    So your data collection template will have ten columns for the wagetypes, and the first column will get loaded in LGA01 and second in LGA02 and so forth.
    this is just a a high level idea, the spreadsheet will become more complex if some of the wagetypes are amounts and others are unmbers/units. also if there are diffent set of wagetypes for different employee groups.

  • Custom table needs to be updated based on changes in Info type P0000

    Hi All,
       I have a requirement wherein when we make changes to info type P0000 this should be reflected to a custom table.
    If i create a new record, delete an existing record or make changes to a record in INFOTYPE P0000 this should also be reflected in my custom table.
       My custom table has 5 fields from info type p0000 and some custom fieds.
       please can you let me know exactly which user exit to use to acchieve the solution. and where exactly i can put the logic.
    Thanks,
    Mars

    Hi Venkat,
      I tried to code in the method AFTER_INPUT and executed but there are few thing which i have come across.
    1. when ever i create a new record in PA40 and each time i save the screens of PA40 this method is called and based on check it tries to update the table taht many times.
    2. The logic which i have used in the BADI implementations is as below:
      DATA: l_text TYPE string,
                 l_answer TYPE string,
                 lw_split TYPE XXXX.  (custom table)
      IF old_innnn NE new_innnn.
        lw_split-mandt = sy-mandt.
        lw_split-pernr = new_innnn-pernr.
        lw_split-begda = new_innnn-begda.
        lw_split-endda = new_innnn-endda.
        l_text = 'Does this employee need a split STIP?'.
            Display a pop up message to the user.
        CALL FUNCTION 'POPUP_TO_CONFIRM'
          EXPORTING
            titlebar                    = 'Choose'
            text_question               = l_text
            text_button_1               = 'Yes'
            text_button_2               = 'No'
            default_button              = '1'
            display_cancel_button       = space
         IMPORTING
            answer                      = l_answer
         EXCEPTIONS
            text_not_found              = 1
            OTHERS                      = 2.
        IF sy-subrc EQ 0.
          IF l_answer EQ '1'.
            lw_split-stflg = 'Yes'.
          ELSE.
            lw_split-stflg = 'No'.
          ENDIF.
        ENDIF.
        MODIFY TABLE  XXXX FROM lw_split.
        CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
          EXPORTING
            wait = 'X'.
      ENDIF.
    3. when i try to activate this chunk of code it gives me error  saying "XXXX" is unknown. i tried to declare it under TABLES but in Vain.
    4 I have also tried to use the modify statement in IN_UPDATE instead of updating custom table in same method but its giving me same error "XXXX" is unknown. i tried to declare it under TABLES but in Vain.
    can you let me know your view on this. The above chunk of code is in case of creating a new record in P0000 info type.
    Thanks,
    Mars
    Edited by: Mars878 on Oct 13, 2009 9:18 AM

  • Workflow for HR Info Type 41

    Hello,
    I got a requirement where a workflow has to triggred when there is any changes made to the HR Info Type 41 via PA30.
    In PA30 transaction code under Info Type 41(Date Specifications) if I enter Date Type as U6 & U7 with dates then an email has to go to a list of people. There is already a workflow developed for the same but I do not know how do I find out which worklfow it is triggering and how do I change it.
    Thanks & Regards,
    Nagaraj Kalbavi

    First, I would suggest you to go through the Business Objects concepts to have a clear idea of where and how they are used.
    To test the BO, enter the ZXXXX in SWO1 and click on "Test".
    Click on the "Instance" where the input will be the Key field number.. and execute. The runtime values (Attributes) will be displayed.. You can execute the appropriate method (you can debug as well by going into the program and keeping breakpoint) and then executing the method..
    Go in display mode, and find out what are the keyfields, attributes, methods and events... If you can read more on Business objects, you will find out the definitions and uses of each of these...
    Go to each method(probably would be custom method in your case which should start with Z or Y) and click on program to see whats the code written in that method..
    Regards,
    PR.
    Edited by: PR on Jun 1, 2009 3:35 PM

Maybe you are looking for