-info XML format for Compressor's command line interface?

Hi Everyone,
I've got a brand new copy of Final Cut Studio HD that I'm using for an encoding project. I'm trying to figure out how to use Compressor's command line interface. I want to give it a MPEG-2 file and a .scc (closed caption) file. I can see how to specify the source file, but I'm having trouble figuring out how to specify the SCC file. As best as I can understand, I'm going to need to use the -info <XML> option, but I haven't found any documentation for this. Can someone point me to the appropriate documentation?
Thanks!
- Kevin

I get an error when I do exactly what you suggested. My problem is not if the XSU is able to locate the xml file because I know it is able to parse it since it picks up an error in it such as if I make the "ROW" element "row" - ie small caps instead of big which is not recognised by XSU. I use the url of the xml file as specified when I open the xml file in internet explorer. The XSU does confirm it inserts the document successfully with my original command but the document simply doesn't get inserted into the table. Specifically, if anyone is to insert the xml file I have shown in Oracle, how would it be approached successfully?
Your help is very much appreciated.

Similar Messages

Advice on constructing a test engine and formatting a spreadsheet test file to perform command line interface testing on a product through telnet or serial interface

Advice on constructing a test engine and formatting a spreadsheet test file to perform command line interface testing on a range of products through telnet or serial interface and output pass/fail results.

If I understand correctly, you want to do the following:
1. Create one or more tab-delimited files that specify a series of query strings (that LabVIEW will send to your products) and expected reply strings (that LabVIEW will look for in response to each query)
2. Run your LabVIEW program (the test engine) and have it execute one or more test scripts from file using either TCP/IP or serial communication to your units under test
3. Track how many of the queries are met with the expected response, and output an indication of whether each step passed or failed
If this is close to correct, then I've attached a sample test file and LabVIEW VI as an example; I chose the TCP/telnet method because it allowed me to use the ni.com Web site to simulate my tes
t hardware. If you happen to own the LabVIEW Internet Toolkit, there's a VI called "Telnet Play Script" in the Telnet palette that does something fairly similar using TCP. The same general model would also work for Serial communications.
Hope it helps,
John Lum
Attachments:
test_engine.zip ‏24 KB

Advice on constructing a test engine and formatting a spreadsheet test file to perform command line interface testing on a product through telnet or serial interface

Advice on constructing a test engine and formatting a spreadsheet test file to perform command line interface testing on a range of products through telnet or serial interface and output pass/fail results.

Hello j. smith,
TestStand gives you the ability to create "sequence files" which are lists of tests to be run sequentially or in parallel. These tests can be written in any language: LabVIEW VIs, C/C++ DLLs, EXEs, ActiveX objects, .NET Assemblies, etc.
You can run your TestStand sequence files from a command-line prompt using the following syntax:
\bin\SeqEdit.exe" /quit -run
This will launch the TestStand Sequence Editor (and optionally prompt you for TestStand login information if you have this configured), run your sequence file, then exit.
If you're using the TestStand process model, it can output your results to a report file or database if you configure this. To use a TestStand process mo
del to execute your sequence file, use the following syntax:
\bin\SeqEdit.exe" /quit -runEntryPoint
Here's an example:
C:\>"C:\Program Files\National Instruments\TestStand 3.0\bin\SeqEdit.exe" /quit -runEntryPoint "Single Pass" "C:\Program Files\National Instruments\TestStand 3.0\Examples\Demo\C\computer.seq"
Note that multiple sequences and sequence files can be specified on the command line.
TestStand supports remote sequence execution using DCOM (Distributed COM), which is an east way to remotely execute tests. But as for running tests or commands through a telnet or serial interface, you would have need to check Windows documentation on how to execute command-line remotely like this.
David Mc.
NI Applications Engineer

Compressor 4 command line -in and -out points

I'm trying to use Compressor 4.1 command line interface to compress various video clips. While I can compress an entire file, start to end, without issue, I can't figure out how to compress a subset of the source file by setting in and out points. The -help information states I can set -in <hh:mm:ss;ff> and -out <hh:mm:ss;ff> parameters except they seem to have no effect as Compressor compresses the full file. Has anyone been able to specify -in and -out parameters successfully? If so, can you please share the appropriate syntax?
FWIW: here is the sytax for command that I've been using to compress 2 seconds of source video:
/applications/Compressor.app/Contents/MacOS/compressor -batchname sampleBatch -jobpath /Shows/filename_HD.mov -settingpath /Settings/480pProxy.cmprstng -locationpath /Clips/clipName_HD.mov -in 00:00:04;00 -out 00:00:06;00
OSX 10.9.2, Compressor 4.1 and Compressor 4.1.1

You have to use quotation marks around the in an out points because of the semi colon.
/Applications/Compressor.app/Contents/MacOS/Compressor -batchname "In and Out Example" -jobpath /Shows/filename_HD.mov -settingpath /Settings/480pProxy.cmprstng -locationpath /Clips/clipName_HD.mov -in "00:00:04;00" -out "00:00:06;00"

How do I create a "command-line-interface" for a game?

Hey people,
For a game I need to make a DOS-like command-line-interface where the user has at least 3 options to answer with, does anyone know how to go about this?
Hope someone here can help me out!
Kind regards,
Angela

I'm not sure what part of this you are having difficulty with. Imagine for a moment that instead of asking for your end user to type something into a text-entry field and to monitor what they type (perhaps when the ENTER key is pressed), that instead you provide 3 buttons on your stage. Responding to a button press in this scenario is much the same as responding to typed user input - your movie does something based on user interaction. Going back to the user entered text scenario, a text or field sprite can detect the ENTER key being pressed and examine the string the user has entered, something like:
on keyDown me
if _key.keyCode = 36 then
    stopEvent
    sText = sprite(me.spriteNum).member.text
    case sText of
      "hack": -- do whatever you need to here
      "research":
      "wait":
      otherwise:
    end case
else
    pass
end if
end

How to get the command line interface for WRT160NL router

hi,
How can I get the command line interface for WRT160NL router. please suggest.

If you’re trying to access the web-based interface of your router, just use its default IP address (192.168.1.1). The Username is left blank and the Password is "admin". Here’s a quick link on how to do that.

Incorrect XML format for outbound binding

Hi,
I am in the process of configuring a scenario where we are sending PO's from SRM to XI in XML format and later we want these PO's in XML format to be sent to a vendor. I am able to send the XML from SRM to XI, but I get the following error message (probably while sending the XML to the external application):
Incorrect XML format for outbound binding , , NO_TO_SERVICE_NAME, MI_Order_CreateOrChangeVendorView_In, urn:poscenario:srm:xi:vendor
Unable to find element OutboundBindingAttributes: Node DY1WebMethodsMI_Order_CreateOrChangeVendorView_Inurn:poscenario:srm:xi:vendor8f16f906899838c7a4b64634e8140706686c72620ed63ed28c12a634f905d0ce.
You help will be highly appreciated.
Regards,
Ravinder Masuta

Hi Tanja,
Now I tried to use the XI channel and I become the same problems. Maybe me configure of the "Receiver Agreement" is wrong.
sender-service      A1CLNT100
receiver-service    A2CLNT100
receiver-Interface: ORDERS.ORDERS05
namespace:          urn:sap-com:document:sap:idoc:messages
communication channel : IDOC
But without the IDOC-channel I become this error message:
OUTBOUND_BINDING_NOT_FOUND --- no Receiver Agreement found
Regards
Christoph

How can i launch firefox AND adds-on (web of trust, http header with options for exemple) in commande line ?

How can i launch firefox AND adds-on (web of trust, http header with options for exemple) in commande line, on windows ?
firefoxe... -option? <addon name>?....?

Does opening this page help: <b>about:addons</b>
*https://developer.mozilla.org/en/Command_Line_Options

XML format for Acrobat JavaScript

Hi,
This is my first posting to any Adobe forum, so please bear with me...
I'm interested in the XML format for Acrobat JavaScript. I'll be using an external editor (UltraEdit). When I do (in Acrobat 8) Advanced-->Document Processing-->Edit All JavaScripts, UltraEdit starts off with this:
//-----------------Do not edit the XML tags--------------------
Interesting, but not very useful. If I look at some existing PDF files containing JavaScript, I see things like:
//-----------------Do not edit the XML tags--------------------
//<Document-Level>
//<ACRO_source>DocOpen</ACRO_source>
//<ACRO_script>
/*********** belongs to: Document-Level:DocOpen ***********/
OK, this is better. In fact, if I look at enough existing PDF files containing JavaScript, I could probably figure out the XML format by myself, including the XML format of tags like <Page-Actions>, <AcroForm>, etc. However, it would be far easier to get the specification of the JavaScript XML format -- for example, what is the format of the text following the "belongs to:" string within the various types of XML tags?
I *presume* this is documented somewhere but I couldn't find it. If someone has the Acrobat JavaScript XML format specification, it would be greatly appreciated.
Thanks.
Dave
P.S. Another possible approach would be to create JavaScripts myself using Advanced-->Document Processing-->Document JavaScripts, and then see what XML is created based on the code I enter into the GUI, e.g. form code, functions, etc. This also seems somewhat inefficient, presuming again that the JavaScript XML format is already documented.

Thanks for the additional information.
I played with JavaScript some more, using my preferred editor, UltraEdit, which I attached to Acrobat. I thought I would be able to take a JavaScript program from one PDF file (source file) and do a copy & paste into another PDF file (destination file). While I can do the paste (again, via UltraEdit) into the destination file and can do an UltraEdit Save, when I go back into UltraEdit via Advanced --> Document Processing --> Edit All JavaScripts, the JavaScript I pasted from the source file to the destination file isn't there in the destination file.
From this, I concluded that I'll need to create the Document-level JavaScript and the form field Javascripts (e.g. a JavaScript triggered by a "Mouse Down" in a button) via the Acrobat GUI's. Acrobat doesn't seem to like it if I bypass the GUIs and just attempt to paste the code directly into the PDF file via an editor. By not using the GUI and just doing the cut & paste as I did, I'm probably missing some part of the code setup/creation process that Acrobat needs to know about.
This is why I originally asked about the syntax for the pseudo-XML, thinking I could just copy the pseudo-XML/JavaScript code from one PDF file to another, and then modify the code to reflect the needs of the destination PDF. Now I understand the need you mentioned to use the Acrobat GUIs to set up the initial XML/JavaScript structure.
Once I have the XML structure set up in the destination file (e.g. a JavaScript triggered by a "Mouse Down" in a button), I can obviously copy code snippets into that <AcroForm> sections, I just can't *create* the original "Mouse Down" <AcroForm> sections via the editor.
Another approach I could follow would be to make a copy of the original source file and change the name of the copy to the desired destination file name, and then start modifying the code in the new (destination) file -- presuming that's the easiest path to get the desired functionality created. This way, I wouldn't have to manually (via the Acrobat GUI) create all of the <Document-Level> and <AcroForm> sections.
Thanks for your (and others') help, let me know if I'm missing anything.
Dave

Oracle VM Manager Command Line Interface

Can anybody suggest any tool for Oracle VM Manager Command Line Interface?
Are they free?
What kind of jobs we can automate using Command line?
If they are not free is it worth spending money to buy them?

Try public-yum.oracle.com
and look at the oracle-addons channel below OEL.
http://public-yum.oracle.com/repo/EnterpriseLinux/EL5/oracle_addons/i386/
Regards
Sebastian

Can I use the Command Line Interface on Unix?

Hi,
We use 9iAS on Unix. We want to use Discoverer Command Line Interface on unix to export the worksheet query result. Can anyone know how to do this? I couldn't find out the command similar to dis5usr.exe for windows version.
Thanks.
Richard Qiu

Hello Richard
You can use the Discoverer EUL Command Line for Java utility. This was released with Discoverer 10g (9.0.4).
Please refer to the documentation for more information on how to use this command line interface: 'Oracle Discoverer EUL Command Line for Java User's Guide 10g (9.0.4), Part No. B10274_01 (PDF)' The document is available from OTN at http://otn.oracle.com/documentation/discoverer.html
Regards
Discoverer Product Management

Command Line Interface

Hi all,
I am trying to write a program with a command line interface and I am running into a few problems.
I read the commands issued by the user as :
BufferedReader in = new BufferedReader(
new InputStreamReader(System.in));
String command = in.readLine();Question 1. Is this the right way?
Question 2. I have to read a password from a user. How do I stop the echo of this password (or change the echo to something like *)? Is it possible to do that from a Java program?
Question3. While the user is typing a command, the system wants to output a message. This jumbles up the echo of the command the user was typing. So I need to show the message from the system on a new line, and then again show the command the user was typing .. or something similar which keeps the whole thing neat. How do I do it?
Some of these requirements might not be possible to implement because of the inherent limitation of the command line interface. :-)
Please help me with this.
Thanks,
Binil

I raised this issue also in another thread.
Actually I am pretty p.o. This issue pops up over and over again but the people at Sun systematically deny the problem and simply do nothing about it. I know, it's not as interseting as EE, 3D graphics or Swing, but it is asked for by many peaople over and over again.
I simply don't understand what is so difficult in the method:
System.in.setEcho(boolean) or System.in.setEcho(char)
Your solution will work, but it is not platform-idependent. That os what Java is all about or am I wrong?
hi,
yah thatz the correct way to read things typed
typed in the command prompt. Am not sure whether you
will be able to mask the character typed to show a *
(but i supoose itz not possible). If you are going
to do any CLI have a look at JNICurses library
available at
http://home.att.net/~psantoro/jnicurses/jnicurses.html
hope that was useful.
cheerz
ynkrish

Command line interface to Crystal? Batch job to refresh report data?

Hi All.
I have some users who do certain work and then want to print an updated report. However they only have the report viewer. As they work at night, they can't ask me to refresh the report.
Is there a facility to schedule jobs like this in Crystal?
Is there a way to create a batch job that will automatically refresh the report?
Is there a command line interface to Crystal?
Has anyone got a suggestion for some other means of solving my problem?
Thanks.

are you using crystal enterprise as your portal? that has a scheduler.

Command line interface to "code cache" memory pool utilization

I need to monitor the usage of the "code cache" memory pool through a command-line interface, but it doesn't seem to me that the jstat tool is able to give me any information about this particular memory pool. Are there any other tools that is able to give me the details I need? I'm using both JDK 5 and 6.
Edited by: normann1974 on Jul 10, 2008 9:40 AM

Typically, this is a class path Problem when the JVM is unable to locate a
class. Are you sure that the class listed as missing below is included in
your class path?
Michael Girdley, BEA Systems Inc
Learning WebLogic? Buy the book.
http://www.learnweblogic.com/
"Pascal Guillot" <[email protected]> wrote in message
news:3a5df1ee$[email protected]..
>
I seem to be running into dificulties when attempting to use theweblogic.Admin class for any commands from the command line
I am running from a Solaris 5.7 box, and java version 1.1.6, and weblogic6.0 server is running in the background
Anytime I attempt to run the class:
java weblogic.Admin <commandofsort> (followed by any neccessary args) Iget the following error msg:
>
java.lang.NoClassDefFoundError: javax/management/AttributeList
at weblogic.management.commandline.CommandLineArgs.<init>(CompiledCode)
at weblogic.Admin.main(Compiled Code)
(I can successfuly invoke most of the utililities in the utils classhowever)
>
any ideas?
Pascal

Newby question about command line interface

Arch is my first linux distro and havnt used others yet.
Just wondering, does Command Line Interface looks and functions all same on other distros?
Because, if u can chose desktop environment like KDE, GNOME and Xfce with other Linux distros as well, then what is difference between others.
Linux is still quite hard for me and just wanted to know if there is "special" stuff that arch can do.
To me, they all looks same with same desktop environment...
thanks

When you mention the "command line interface" (CLI) there are a few things involved: a terminal emulator, a shell, and the programs you have installed. That said, as far as running programs goes
The terminal emulator is the application that hosts/shows your shell. In KDE it's (by default) Konsole, GNOME uses gnome-terminal, others might use xterm, aterm, rxvt, rxvt-unicode or one of many others. Different emulators provide some extra features (e.g. tabs) and they all differ in memory usage, speed, and integration (or not) into a given desktop environment. That said, they all pretty much work the same for launching programs and operating in a shell: you type commands and press enter.
The shell is what runs your commands and also provides some scripting capabilities. Generally, bash seems to be the most used as a default shell. You can change your shell if you wish, as some shells provide extra features like programmable command completion. Other shells are lighter or more POSIX-compliant. For a starting user, you're well enough off just using the default (probably bash) until you find a reason for which you must have a different shell.
Finally, the programs installed will affect what you can run in a terminal. Different distros will have different quantities of programs installed by default. (Arch's base install is very minimal.)
Now, with regards to Linux, at the end of the day all distros are Linux with some desktop environment (DE) and some Linux apps. The DEs and applications are taken from the same source, but some distros provide patches for extra capabilities or configuation. However, if you see something you like in openSUSE, say, you can download the software, patch it, and configure your Arch to work like openSUSE. Each distro, though, has its own focus and philosophy which affects:
* how many and what applications are installed by default
* amount of configuration required after install
* stable vs. bleeding edge
You can read more about this in the wiki reference above.
So having said all that, Arch gives you a simple, minimal base install which you can then easily customize by app installation and configuration. It is reasonably bleeding edge, meaning application updates usually make it to Arch fairly quickly. With time and knowledge you can make Arch do near anything that another distro can do, but that's not really the idea behind Arch in my opinion.
Hope that helps,
j

-info XML format for Compressor's command line interface?

Similar Messages

Maybe you are looking for