InfoArea in NW2004S Stats Cube?

Hello,
Is there a way to restrict by infoarea in the stats cubes in 2004S?
Thank you!

In BW3.2 there was an infoarea infoobject. Is there a substitute for this in the new statistics cubes?

Similar Messages

  • Query on Stat Cube

    Hi,
    I am trying to get query list based on last used date.
    I ran query on stat cube 0BWTC_...
    Also, i got list of queries from the view v_compdir_compic in bw backend.
    But the query list i get from stat cube query is less than what i get from View table.
    there are aprox 300 less queries.
    can u please tell me why the list is different ?
    thanks,
    KS
    Edited by: Keral Smith on Nov 4, 2008 10:04 AM

    Hi Abhijit,
    We have all BW statistic cubes loaded on november 1st.
    which are 0bwtc_c01,.......they are for aggregate, for OLAP, for OLAP navigation etc.
    so how come the list of queries are different than V_COMPDIR_COMPIC ?
    any clue ?
    thanks,
    KS

  • Should Fiscal Year be derived from posting date for sales stat cube

    Greetings,
    Is it common to derive FY from posting date of the invoice for the sales stat cube.  We have the standard SAP datasource 0UC_SALES_STATS_02 to extract billing information from ECC.  On the BI side, the FY is derived from posting date in the transformation before it reaches the target (i.e. cube).  Is this derivation common
    Thank you in advance for your response.
    Behnaz

    Hi,
    You can derive the Fiscal Year from the posting period and it not uncommon to see this.
    Reg,
    Rahul

  • To install BI Stats cube in 7.0 - BI Admin Cockpit necessary?

    Hi Guys,
    Just curious to know, to install BI Stats cube (0TCT*) in BI 7.0, is installation of BI Administration Cockpit necessary? We would like to install BI Stats cube from Business content and start collecting Stats.
    Did anybody face problems activating BI stats cube in BI 7.0?
    Abhijit
    Edited by: ABHIJIT TEMBHEKAR on Nov 12, 2008 1:44 PM

    Its the reverse, To have BI Admin Cockpit, BI Stats cubes (0TCT*) are necessary!!
    VJ

  • Stats Cube -- Frequency of a query run.

    Hi All,
    I have been given a certain set of queries and the user wants to know how frequently these reports run and the user name who runs the reports. I know these can be done by working upon stats cube. Can someone please help me in lil details on the cube name and wat all do i need to do in making a new report that would fetch the infromation mentioned above.
    Your help would be appreciated.

    Hi,
    I used 0TCT_MC01  as all my reports are based on multiproviders.
    I included the following fields in rows
    0TCTUSERNM -- USER
    0TCTBIOBJCT -- BI REPORT
    0CALWEEK -- CALENDER YEAR/WEEK
    Now you need to check if statistics is enabled for the infoproviders that you are looking for stats.
    You can check it in RSA1--> Tools --> Maintainance of statistics properties.
    When you run the report you get
    BI Report   User Name Cal year/week( or whatever date field you are taking)
    Z*******         XYZ     12/2010
    You can use the excel function subtotals, ( its in Data--> Subtotals)
    Here for every change of BI report it gives the total number of users as a subtotal count for a particular time frame
    There might be an easier way to get your result, but I followed the above mentioned method.
    El.

  • Stats Cube

    Hi
    we have upgraded to 7.0 and my user wants the data for the stats cube 0BWTC_C03 which is the cube for bw 3.5
    i schedule the load but get zero records any pointers if i need to take care of something else or if i am missing out something over here
    Please suggest ?
    Thanks
    Puneet

    Hey check if you have enabled capture of statistical data.
    This is performed in the administrator workbench > Tools > BW Statistics for InfoCubes. Choose select all in order to capture OLAP and WHM statistics for all InfoCubes.
    Hope this helps.

  • Sales Stats Cube has incorrect data, amounts are doubled...

    On 05/28/2010, a request in the PSA was processed to the DSO twice and subsequently processed to the InfoCube.  This is an issue because the key figures aggregation for the following key figures is set to summation
    ·     0VAR_VAR           Variable AMT
    ·     0UCTAX_AMT      Tax Amount
    ·     0UCTAX_BASE     Tax Base
    This is causing the Amounts in the DSO Active Table and Cube for 05/28/2010 to double.
    Subsequently the request in the PSA has been deleted and the request in the Cube has been compressed.
    How can we correct the doubled amounts in the Cube and DSO?

    The biggest challenge here is to do a full repair load from ECC system as
    we have to run the Mass Activity Job to populate the staging table so we can pull the record using the extractor. We have to run the mass activity job again because data is not available in staging table as we keep only one month worth of data.
    How to run the mass activity Job for this scenario and make sure that we are not missing any documents?
    Thank you.

  • BI Admin Cockpit - Field Start-Time 0TCTSTRTTIM in cube 0TCT_C21

    Hello,
    We recently installed the BI Admin Cockpit from technical content. When looking at the data transfer rules in all concerned info cubes like 0TCT_C21 (Process Statistics) I find that all time and date fields are derived from some time stamp field. The derivation is done based on time zone UTC for all fields except the field Start Time (0TCTSTRTTIM). For 0TCTSTRTTIM the conversion is done based on local time zone (SY-ZONLO). I find this rather irritating when developing queries. Is there an explanation for this?
    Regards,
    Ulrich Meier

    Its the reverse, To have BI Admin Cockpit, BI Stats cubes (0TCT*) are necessary!!
    VJ

  • BI 7.0 Stats - Is it supposed to install us the Standard Process Chain?

    Hi All,
    We understand that Virtual Cubes would obtain the real-time based on what is there in the basic cubes, underlying the Technical Content Multicubes.
    We did install all the technical content. Is it supposed to install us the Standard Process Chain for BI Statistics as well to transfer the stats data into the Basic Cubes.?
    If not, how do we setup the stats loads to the basic cubes easily....?
    Thanks in advance.
    Best Regards,
    - Shashi

    Hi,
    When you install the BI 7.0 stats from teh BI content all the process chains related to it automatically gets installed.  But you can see teh correct report only if the DB Stats is uptodate for all the info providers in your system. I mean to say that if all the dataloads to the cube is followed by the DB Stats process only then the coressponding Technical Stats cube gets the correct data. After which you can see teh correct report.
    There is no need to create a process chain separately for them. Just you need to keep updating the DB stats for your info providers.
    Navesh

  • BW Statistics Cube is not Getting Data

    Hi All,
    I have installed  BW statistics first time and every thing goes fine , it activated succesfully.
    But when i checking in the indivisually in every cube, not getting any request, as well as none of the Technical contained query giving Out put,
    But I can trace it in the ST03.
    So please let me know where i made mistake during installation of BW statistics.
    Regards
    Prem

    Hi Premanshu;
    You can do the Init manually this way you will also see if the data load is working or not...and in the process chain infopackage include it for delta laod.
    The frequency of the data load for stat cube depends on your systems and how much the accuracy the users wants from the RSDDSTAT* table. We have the process chain to load the stat cube on weekly basis...this should be enough.
    Assign the points if these answers helps.
    thanks.
    BK

  • Unable to restrict the new cubes(transactional) in the query

    hi bw pro's,
    i have a bw statistic query(custom one) query is designed by statistic cube(0BWTC_C02). In the query 4 custom cubes are restriced. now the requirement is 2 more transactional cubes need to be added in the query.
    now the problem is when i am trying to restrict the another two cubes, i am unable to find the 2cubes in the list of the cubes.
    even i added the two cubes for bw statistics by choosing tools->bw statitstics for infoprovider.
    still iam unable to see in the list. Can anybody suggest me. how to proceed.
    any response will be rewarded.
    thanks
    suri

    Hi stefan,
    Thanks for your reply.well hope it will resolves the problem.
    before that i want to clarify one more doubt, wht exactly ur telling in the first point about navigations, i am not getting that. can you be detail plz.
    The second point is BW stats cube are lastly updated on 08. 2004.hope it would also be another reason.
    Thanks,
    suri

  • BW 2004s stats 0TCT_C21

    Hi ,
    I am trying to load the BW stats cube 0TCT_C21, this particular data load is failing because there are some records with timestamp field as null.from the source...i implemented the note 979721, but this is only for populating the 0calday field from the start timestamp field, so whenever the timestamp is null, its erroring out, did anyone faced the same issue, i looked up for any sap note but didnt find any, please let me know how to proceed.
    Thanks
    Vj

    Yes evrything is upto date, as i mentioned i added the routines as per the SAP Note, but those routines use time stamp for calculation, if that is coming zero then the data is failing, what can i do for the time stamp not getting zero.
    Thanks
    Vj

  • BW Stats 0TCT_C21

    Hi ,
    I am trying to load the BW stats cube 0TCT_C21, this particular data load is failing because there are some records with timestamp field as null.from the source...i implemented the note 979721, but this is only for populating the 0calday field from the start timestamp field, so whenever the timestamp is null, its erroring out, did anyone faced the same issue, i looked up for any sap note but didnt find any, please let me know how to proceed.
    Thanks
    Vj

    Yes evrything is upto date, as i mentioned i added the routines as per the SAP Note, but those routines use time stamp for calculation, if that is coming zero then the data is failing, what can i do for the time stamp not getting zero.
    Thanks
    Vj

  • Correct cubes for retail implementation

    Hi guys,
    We are designing a set of Merchandise reports for a retail client and currently carrying out the technical analysis ahead of the build. There is an 0RT InfoArea which has many cubes aligned to our report requirements. However, there is a note displayed with the name that this InfoArea is OBSOLETE and suggests to u2018seeu2019  the 0TI InfoArea (Trade Industries).
    Could you please advice if the 0RT InfoArea is being d and there is a recommendation by SAP  to use the 0TI InfoArea going forward instead.
    Your help is appreciated.
    Thanks

    Hi
    Info cubes to use in Retail in Merchandise Mgmt are :
    0RT_C01
    0RT_C02
    0RT_C03
    0RT_C04
    0RT_C05
    0RT_C35 to 0RT_C41
    Check the standard BI contents in the metadata repository. Check if the info area is 0RT or 0TI. Even if the infoarea must have changed the Info providers , info sources, DTPs , info packages provided by SAP for Retail Operations wouldnt change to a large extent.
    Cheers
    Umesh

  • Installing/transferring in the content for TCT (BW statistics)

    hello - i have a bw350 system where i'm trying to get all the bw statistics (TCT) stuff setup. I've found some How To guides and help files for this but still have an issue. 
    where i'm at now, i can see all the bw stat cubes in rsa1-> modeling.  i can also see all the bw stats reports in RSRT if i drill in thru the infoarea button.  so all that's great.  BUT, if i goto rsa1--> infosources --> technical content --> bw statistics ... i don't see any of the Infopackages yet under the Infosources shown there.
    thanks

    thanks krzysztof and ravi - i actually figured out the problem w/ this help file http://help.sap.com/saphelp_nw04/helpdata/en/8c/131e3b9f10b904e10000000a114084/frameset.htm
    the item#2 stuff I had not done yet.
    i do have 1 question still - i now can see infopackages in my bw statistics infosources (rsa1 -> modeling --> infosources --> bw statistics...) - at least for all of them but 0bwtc_c02.  that one still doesn't have any - the rest have infopackages under them.  any ideas?

Maybe you are looking for