Infobject still used in infosource Zods1 ( default)

Hello Experts,
A small issue while deleting a infobject.
I am trying to delete an infobject which was earlier included in the ODS and the corresponding Infosource. I deleted the infobject entry in the infosource Zods. But I am not in a position to delete the infobject.
it gives me following error:
(green) Deletion of objects with type infobjects.
(red) Using Infobject Zinobject1:
(red) Still being used in infosource Zods1 ( default).
(green) Infobject Zinobject1 cannot be deleted due to above references.
As far as I know there are no references left. I have deleted all the references of that infobject Zinobject1.
Any suggestions appreciated.
Thanks,

I checked in the Metadata repository. It show that the infobject is used by the infosource. But I have already deleted it from the infosource. If I go into the infosource and search it not present.
Any idea if this a known problem.
Thanks in advance for the suggestions...

Similar Messages

How do I prevent browsing and search data from being forwarded to Google by Mozilla, while still using Mozilla's Firefox as my default browser?

I do enjoy using Mozilla's Firefox as my default browser, BUT, I don't enjoy the details of my life, to include my Internet activity, to be archived by Google, or anyone else, via Mozilla's/Firefox's sharing of my Internet browsing and/or search engine activity with any aspect or facet of the Google organization. With all of this said, my question is, "How do I prevent browsing and search data from being forwarded to Google by Mozilla, while still using Mozilla's Firefox as my default browser?"

Firefox's default behavior includes no automatic interaction with Google.
We do use Google as default search engine and to report web forgery in the 'help' menu, but no data are sent to Google without your knowledge, and you can change your preferred search engine at will.
However many websites themselves make use of Google Ads which do cause interaction with Google when you load the webpages. This is visible in status bar and happens in any browser. The [https://addons.mozilla.org/en-US/firefox/addon/noscript NoScript] add-on for Firefox can largely save you from this problem.
If you see things happening otherwise, please reply with details on what you see.

Can I use Extreme with Time Capsule to extend my gateway router and still use Capsule as "external HD"?

Bought Airport Extreme with Time Capsule version 7.7.2 with 2 Terabytes Feb 2014. It was probably an expensive mistake, but after searching for weeks for a external hard drive, it seemed reasonably priced to just use the capsule as my external hard drive for the price I paid. Spend an hour with Apple Care to get it working-had to use ethernet cord to my iMac OS 10.8.5 processor 2.5 GHz Intel Core i5. I did not "need" the airport as we have a Winstream SAGEMCOM modem/router (Sagemfast 1704) But, I was desperate and about to lose my old external hard drive with literally had 3 computers worth of information on it. It had already "died" once, but got it back, so once I got the airport/capsule and was told I just paid for an expensive HD, I had no time to take it back to get something else-I had to transfer my info right then. We (Apple Care) could not get it to work as a HD wirelessly. It may be because it was being set up for the first time; I don't know. I was hoping I would get a transcript of all done so I could do it myself if needed later on, but when I looked at my email-they didn't do that. (Don't know if that is normal, I was used to other "techs" sending the email.) So now I really want to try to move my airport and "extend" our wifi as it said on the "box" that you could do...
Our Windstream router had to be placed in the lower level at the bottom of our stairs. The stairway is "open" (no door going down the steps). I want to place the Extreme at the top of the stairs so that we can use some things in our offices or not have Netflix on our TV lose connectivity when we all are on our computers.
I know I need an ethernet cord to connect directly with the modem/router to the Airport Extreme. I don't know what I will need to do after I connect it as it was so goofy when we set it up the first time (With the app it would disappear and not show up..) But my biggest concern is will I be able to still use the capsule as my hard drive and will I be able to do it wirelessly? (Even with it connected by ethernet, every day I have to re-connect to it before I can click on anything on the hard drive. It never shows up on it's own as my old HD did. That drives me nuts.) I do back up using the Time Capsule feature as well. I appreciate any help.

I am still willing to plug in the ethernet cord to the modem/router and try it IF I was able to get a step by step instructions..
Connecting the Time Capsule (TC) to the existing Winstream by Ethernet would be the basis for a roaming type network. This type of network allows you to basically "roam" with a wireless client and connect to either router. This, in essence, would provide you with an "extended" wireless network. The Apple routers can work with just about any manufacturers' routers in this fashion.
The keys to having a successful roaming network are as follows:
The routers must be interconnected by Ethernet.
Both routers will broadcast their own Wi-Fi network, but MUST use the same Network Name (or SSID), wireless security type (WPA or WPA2), and wireless password.
The TC MUST be reconfigured as a bridge.
Connect a single Ethernet cable between one of the Winstream's LAN ports and the WAN (circle of dots) port on the TC.
The basic steps are:
Power-down the Winstream.
Perform a "factory default" reset on the TC. Leave the TC powered-down after the reset has completed.
Connect the TC to the Winstream using an Ethernet cable.
Power-up the Winstream. Wait at least 10-15 minutes to allow it to initialize.
Power-up the TC. Wait at least 5 minutes to allow it to initialize. (Note: Since we just reset the TC it will be performing as a wireless router that will be broadcasting an unsecured Wi-Fi network with a Network Name of something like: Apple Network NNNNNN)
Connect your computer to the Winstream's Wi-Fi network.
Run the AirPort Utility. select the TC, and then, select Edit.
Go to the Network tab.
Change the Router Mode option to: Off (Bridge Mode)
Select the Wireless tab.
Verify that the Network Mode option is set to: Create a wireless network
For Wireless Network Name, enter the Wi-Fi network name used by the Winstream.
For Wireless Security, select the equivalent security type that is used by the Winstream. (Note: Use "WPA/WPA2 Personal" if the Winstream is using WPA/TKIP. Use "WPA2 Personal" is the Winstream is using WPA2/AES.
For Wireless Password, enter the same password used by the Winstream.
Select Update and allow the TC to restart.
As far as your external HD, yes you should still be able to use it as before.

Two previous questions may not have been as clear as I would have liked. I recently upgraded my MacBook 2008 (10.5.8) to Snow Leopard (10.6.8). With the updates came iTunes 11.1.1 and Quicktime 7.6.6. I am still using Garageband 2008 and iPhoto 2008. When

Two previous questions may not have been as clear as I would have liked. I recently upgraded my MacBook 2008 (10.5.8) to Snow Leopard (10.6.8). With the updates came iTunes 11.1.1 and Quicktime 7.6.6. I am still using Garageband 2008 and iPhoto 2008. When I create music in Garageband I usually adjust the volume and save it. Even now when I share the Garageband created files with iTunes 11.1.1, the volime I previously set in Garageband is retained. However, when I use the music to create a slide show in iPhoto 2008 and export to Quicktime 7.6.6, the volume level I previously set is lost and seems to default to a low level. The problem seems to be either in the slide show export from iPhoto 2008 to Quicktime 7.6.6 or in Quicktime itself. Is there a work around, so that I can retain the volume level I had previously set in Garageband, a volume level that seems to transfer without problem to the new iTunes. But then iPhoto 2008 (slide show) possibly or Quicktime 7.6.6 do not cooperate. Before I did the upgrade to Snow Leopard, the new iTunes and Quicktime I had no problems with the set volume being retained in the old Quicktime. The reason I need control over the volume is that all these music files are uploaded to YouTube.

Two previous questions may not have been as clear as I would have liked. I recently upgraded my MacBook 2008 (10.5.8) to Snow Leopard (10.6.8). With the updates came iTunes 11.1.1 and Quicktime 7.6.6. I am still using Garageband 2008 and iPhoto 2008. When I create music in Garageband I usually adjust the volume and save it. Even now when I share the Garageband created files with iTunes 11.1.1, the volime I previously set in Garageband is retained. However, when I use the music to create a slide show in iPhoto 2008 and export to Quicktime 7.6.6, the volume level I previously set is lost and seems to default to a low level. The problem seems to be either in the slide show export from iPhoto 2008 to Quicktime 7.6.6 or in Quicktime itself. Is there a work around, so that I can retain the volume level I had previously set in Garageband, a volume level that seems to transfer without problem to the new iTunes. But then iPhoto 2008 (slide show) possibly or Quicktime 7.6.6 do not cooperate. Before I did the upgrade to Snow Leopard, the new iTunes and Quicktime I had no problems with the set volume being retained in the old Quicktime. The reason I need control over the volume is that all these music files are uploaded to YouTube.

Is it possible to set a default music player for the music on my external hard drive while still keeping my iTunes the default player on my Mac ?

Is it possible to set a default music player for the music on my external while still keeping my iTunes the default player on my Mac ?
Message was edited by: Pellseidon

There is no setting in the iPhone to set another default music player. The default is Music. If you are using another application, you are at the mercy of how that application operates as far as what occurs when it stops or errors out. The car is looking for music to play.

The use of InfoSources in BI 7.0

Hello everyone...
Is it still generally accepted practice to use InfoSources in BI 7.0? What will its use be more of for in BI 7.0? If it IS still needed in BI 7.0, should I define it on the datatarget?
Thank you.
Philips

Hi Philips,
Infosource is not mandatory anymore. Scenarios for flexible infosource:
A flexible infosource is necessary in order to use currency or unit conversion from the source datasource → define infosource as an intermediate structure
You can use a flexible infosource as a uniform source for several targets; the infosource can be the target from different sources.
So we can use an InfoSource as an optional structure between a transformation and another transformation. This is necessary, for example, to consolidate several sources into several targets or to use InfoObject-based information.
Note: for direct InfoSources (For master data updates), there is no difference between old and new infosource, i.e. you can define a transformation as well as transfer rules.
Please assign points if it is useful.
Regards,
Anil

I have just transferred my iTunes library from a hard drive previously connected to a windows laptop to a MacBook Pro and now all my options for editing info are greyed out. I have seen the answers if still using windows but could find a similar situation

I have just transferred my iTunes library from a hard drive previously connected to a windows laptop to a MacBook Pro and now all my options for editing info are greyed out. I have seen the answers if still using windows but could find a similar situation to this one.

Eels290776 wrote:
if my external hard drive is not connected to either of my machines, and I download something onto my iMac and then something different onto my Macbook, where are my machines going to be storing the new downloaded media
when the drive is not connected, +iTunes media folder location+ will default back to <MacintoshHD>/users/<yourname>/music/iTunes/iTunes music (or media)
and when I next connect the external hard drive how will I easily get the newly downloaded media onto the external HD
you'd have to point +iTunes media folder location+ back to the external via preferences > advanced > iTunes media folder location, then file > library, organize library > consolidate files
and essentially, to have it easily readable on both machines?
in that case it might be best to copy the entire iTunes folder to the external. then, on each machine, launch iTunes while pressing option on your keyboard. when prompted, click on +choose library+ and navigate to the iTunes folder on the external.
note only one iTunes can access the iTunes library @ a time !
also, make sure the external is mounted on either machine before launching iTunes.
JGG

Airport Express for Airplay Audio Stream while still using iPhone's 3G/4G Internet?

I'd like to use an Airport Express to stream music from my iphone via Airplay (AMP > Analog RCA's > Minijack Splitter > Airport Express). Here's the rub: I wont have an internet connection where this setup is located at.
Basic networking would make it impossible to get online with thise becaue the iphone would be looking at the Airport as the default gate.
I understand that you can setup the network on your phone to be a static IP, subnet, and leave the default gateway blank. This should allow the phone to see the Airport/Airplay and still utilize the 3G/LTE of the AT&T service. Can anyone confirm this? UPDATED, THIS PIECE WORKS LIKE A CHARM.
If that works, that's great, I could stop there, but I'd like to take it a step further to make it easier to use by someone other than a network engineer. Can you set the DHCP server on the Express to give out a Blank default gateway, or will you need to configure the network on each device you connect to it?
The last piece isn't a deal killer for me, but it would make it super easy to use for others.
Can anyone help?
Thanks!
Ryan

Hello TKSF78. Welcome to the Apple Discussions!
I want to use my Airport Express to stream my music to my stereo so I can listen to music while still using the WIFI connection for internet.
In order to do both simultaneously, you just need to reconfigure the AirPort Express Base Station (AX) to join the wireless network created by the other router.
The following is the basic settings to do so:
AirPort Utility > Manual Setup > AirPort > Wireless
o Wireless Mode: Join a wireless network
o Wireless Network Name: <enter the Network Name or SSID of the wireless network that you want your AX to join>
o Wireless Security: <select the appropriate security type>
o Wireless Password: <enter the appropriate wireless security password>
AirPort Utility > Manual Setup > Music
o Enable AirTunes (checked)

Since this morning all text in firefox look slightly different - I think it still uses the same font, but renders it differently.

Since this morning all text in firefox looks slightly different - I think it still uses the same font, but renders it differently!? I would like to have it changed back to what it was. Any help is welcome.
Some facts:
- Happens only in Firefox (IE & Chrome still look the same)
- Already did a reset to defaults
I'm using the latest version of Firefox
Screenshot can be found here: [http://www.ka-pow.net/media/images/firefoxissue.jpg link text]

Reset the page zoom on pages that cause problems: <b>View/Beeld > Zoom > Reset</b> (Ctrl+0 (zero); Cmd+0 on Mac)
*http://kb.mozillazine.org/Zoom_text_of_web_pages
Press F10 or tap the Alt key to bring up the "Menu Bar" temporarily if the Menu Bar is hidden.
Use "Firefox > Options" instead of "Tools/Extra > Options" if the menu bar is hidden.

If i download windows with bootcamp does that mean i can still use Macintosh and if so how

if i download windows with bootcamp does that mean i can still use Macintosh and if so how

Welcome to Apple Support Communities
If you installed Windows properly, you can still start in OS X and use it whenever you want. However, Boot Camp changes the startup partition to Windows, so you may note that you can't use Mac OS X.
There are two ways of starting in OS X:
1. Hold the Option (Alt) key while your computer is starting until you see all the bootable partitions in the screen, and choose your OS X partition.
2. Hold the X key while your computer is starting.
If you have a iMac or a Bluetooth keyboard, make sure you hold the key after hearing the startup chime.
If you want to start in OS X by default, after starting in OS X, open System Preferences > Startup Disk, and choose the OS X partition

Is Oracle Expert tool still used in Oracle database 11g?

Is Oracle Expert tool still used in Oracle database 11g?

!exp help=yes
Export: Release 11.2.0.1.0 - Production on Sat May 8 08:17:06 2010
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
You can let Export prompt you for parameters by entering the EXP
command followed by your username/password:
     Example: EXP SCOTT/TIGER
Or, you can control how Export runs by entering the EXP command followed
by various arguments. To specify parameters, you use keywords:
     Format: EXP KEYWORD=value or KEYWORD=(value1,value2,...,valueN)
     Example: EXP SCOTT/TIGER GRANTS=Y TABLES=(EMP,DEPT,MGR)
               or TABLES=(T1:P1,T1:P2), if T1 is partitioned table
USERID must be the first parameter on the command line.
Keyword    Description (Default)      Keyword      Description (Default)
USERID     username/password          FULL         export entire file (N)
BUFFER     size of data buffer        OWNER        list of owner usernames
FILE       output files (EXPDAT.DMP) TABLES       list of table names
COMPRESS   import into one extent (Y) RECORDLENGTH length of IO record
GRANTS     export grants (Y)          INCTYPE      incremental export type
INDEXES    export indexes (Y)         RECORD       track incr. export (Y)
DIRECT     direct path (N)            TRIGGERS     export triggers (Y)
LOG        log file of screen output STATISTICS   analyze objects (ESTIMATE)
ROWS       export data rows (Y)       PARFILE      parameter filename
CONSISTENT cross-table consistency(N) CONSTRAINTS export constraints (Y)
OBJECT_CONSISTENT    transaction set to read only during object export (N)
FEEDBACK             display progress every x rows (0)
FILESIZE             maximum size of each dump file
FLASHBACK_SCN        SCN used to set session snapshot back to
FLASHBACK_TIME       time used to get the SCN closest to the specified time
QUERY                select clause used to export a subset of a table
RESUMABLE            suspend when a space related error is encountered(N)
RESUMABLE_NAME       text string used to identify resumable statement
RESUMABLE_TIMEOUT    wait time for RESUMABLE
TTS_FULL_CHECK       perform full or partial dependency check for TTS
VOLSIZE              number of bytes to write to each tape volume
TABLESPACES          list of tablespaces to export
TRANSPORT_TABLESPACE export transportable tablespace metadata (N)
TEMPLATE             template name which invokes iAS mode export
Export terminated successfully without warnings.

Upgraded Java, CF still using older version - how?

This server is Win2008 fully patched, IIS 7.0 in good shape - CF 9.0 no patches installed - which we obviously want to fix. When we tried to install patches, we got this:
To try and resolve this, our first mistake was installing Java version 8 (1.8) - which we-now-know doesn't work with 9.0. What I'm not following is why CF settings reports still using 1.6. From what I've read and can see in java.config, it's storing/accessing its own JRE in CF directories. 2 questions: 1) How can I access the security settings for this JRE so I can get patches installed 2) If not possible, am I right in thinking we have to uninstall 8, reinstall the server version of 6 (1.6), point CF at the server version of Java so we can change the security settings (with restarts at the proper places) so we can start getting security patches installed? Any alterations to those steps?
Once I get to patch 4 we'll be upgrading to Java 7 - does CF 9.01 fully patched work with Java 1.8? I see Java 7 is due to expire April 2015.

Coldfusion uses its own version of java by default. You can, however, change this to use the version installed on the server when you download it off of the internet. Here is a blog post about this process - How to change/upgrade JDK version of ColdFusion server — Adobe ColdFusion Blog.
Note as well just because a new version of Java is installed doesnt mean that the old version is gone. Major java revisions dont upgrade, like .NET it just installs the different version. Sometimes when you install Java 7 or 8 it will leave the old legacy versions which the browser will still try and use. Usually, after the Java install is done, it asks if you want to remove the outdated versions. You can use the official Java uninstall tool to scan for old versions and remove them for you - Java Uninstall Tool
Coldfusion 9 wont support anything higher then Java 7. Java 8 has only just been made available to the most recent version of Coldfusion in the last 6 months or so. Like Java 7 soon, Coldfusion 9 is end of life and support for it stopped last year.
Finally, you don't need Java to update CF9. Java is used for the browse dialogues to find the files. If you have already downloaded the hotfix jars, just copy and paste the path & file name in to the Update File box and click Submit Changes. This will do the same thing and install the hotfix.

Will you ever have to use an InfoSource in BI 7?

Hi,
for all the review that I've made so far, one thing that still confuses me is the role of an InfoSource in a BI 7.0 environment.
Will you ever have to use an InfoSource in BI 7? Any situation that calls for that?
Thanks

Hi........
1.In the BI 7 environment you may choose to bring an INFOSOURCE in the data flow.. Right?
Yes.......u r absoulately right......
2.u201CAn InfoSource is only required for complex transformations (multistep procedures) that cannot be performed in a one-step procedure.u201D
--what makes the model you provided u201Ccomplexu201D to bring in the InfoSource?
--So, in your model, what could not be performed in a u201Cone-step procedureu201D that necessitated the Infosource?
Is this what you ae trying to say:
that you used the first set of transformations as u201Ctransfer rulesu201D?
and you needed to use 3 additional transformations as u201Cupdate rulesu201D to the InfoProvider?
and are you saying here that those 3 steps (the 3 "update rules") are what you eliminated by combining them behind the InfoSource?
If that my understanding is right, why couldnu2019t you combine them behind a single new Tranformation but InfoSource, before the new Transformation?
Yes u can think it in that way also.....actually we use infosource in this case........to reduce the redundency of work............I mean suppose u need to write a End routine..........which will delete some fields......and this field exist in all the three datasource..........and every time......for each Transformation u hav to write the code........then its better........that u merge all the three Transformation in one Infosource........then a single transformation from the infosource to the target.......and in that Transformation u write down the sode.....
3. I read that you create a Transformation by right-clicking on the data target, to create the transformation under it. I donu2019t have access to a BI system now but your model suggests that it can be done, by right-clicking on the InfoSource, to create a Transformation under the InfoSource. Right?
i.e. that is how in your model you create 3 transformation under the InfoSource, right?.
Look first u hav to create the infosource............u can create Transformation by right clicking on the Datasource or the Target both.......so for the first three Transformation..........here the source is the Datasource and the target is the infosource..........so either right click on the Datasource or the infosource >> Create transformation........there as a target select infosource............Now for the second level transformation...............source is the infosource............so again either right click on the infosource or the target and create transformation.......
4. As part of my summary, I am also deducing that even in the BI 7 implementation, there are still two different types of datasources(3.5 and 7.0 datasource) since SAP is still on its way to make all datasources as according to BI7. And that even if you are in a pure BI 7 environment and you decide to use the 3.5 types of data sources, you have no option but to use InfoSource in your model. Right?
Look.......in BI 7.0 also............for 3.5 datasources u can use the old model............but if u use Emulated datasource (if you replicate the old DataSource to a NetWeaver 2004s BI system, we call this DataSource an 'emulated' DataSource. An 'emulated DataSource' is a DataSource that has the same 'look and feel' as the new DataSource, but is actually a BW 3.x DataSource)............if u migrate a datasource.then obviously u hav to use 7.0 flow..........
For an example..........BI 7.0 does'nt support Hierarchy datasource.....u cannot use it as Emulated datasource also.....u hav to use it as BW 3.X datasource only...so in that case u will use 3.X flow only..............
Hope this helps.......
Regards,
Debjani.....

Joining two datasources using an InfoSource

Hello Experts,
is it possoble to join two datasources (two database tables sharing an attribute) using an InfoSource as it works with two InfoSources and one ODS?
Axel

In your source system, create a view in se38 with your tables. Then, still in your source system, go to t.c. SBIW and create a new DataSource with this view. Then go to your BW, replicate DataSources of your source system and activate.
I have not explained all the steps but is not a very dificult process, so i think you will not have problems.
Regards

If I download google chrome can i still use safari as my main web browser

If I download Google Chrome can I still use safari as my main web browser?

Yes.
Go to the Safari menu bar (top of your screen). Click Safari / Preferences then select the General tab.
Select Safari from the pop up menu where you see: Default web browser

Infobject still used in infosource Zods1 ( default)

Similar Messages

Maybe you are looking for