Infoblox Captive Portal will not pass the "Accept" screen on Iphone or ipad 6.1.2

I am learning there is an issue with 6.1.2 with Captive Portal services where the latest IOS release will not progress beyond the terms and conditions. The next step in the authentricatoin process is certificate check so it would appear Apple has altered the process?
We have a lot of users complaining now but only 6.1.2 is affected. I have checked previous version on other devices and there is no issue.
Thanks
Ken

Anyone? C'mom, I know some of you techie type folks know how to fix this!

Similar Messages

MacBook Pro start up disk full. Will not pass the grey screen

Hi
I didn't realized how close I was to fill the start up disk and now my mac pro will not boot.
I have read many entries and try a few things but nothing has worked.
I have the late 2011 MacBook Pro running Mavericks 10.9
Of the 499.25 GB I only have 176.1 MB available.
I tried reinstalling the OS X but I don't have enough space to do it.
On the disk utility I selected the volume Macintosh HD disk and clicked on Verify Disk. After 10 minutes the message read: The Volume Macintosh HD appears to be OK.
I also clicked on Repair Disk and after another 10 minutes the message read: Volume repair complete.
Updating book support partitions for the volume as required.
At this point I don't know what else to do.
Ideally I would like to be able to access my hard drive to delete the junk I don't need and safe the things I need.
I don't want to loose my files and have to format the whole thing.
Is the a way to save my files?
Thank for all the help.

Do what arthur suggested but have an external HD on hand, formatted OS X Extended (journaled) to move files from your MBP to it so as to clear out some free space.
It's recommended that a minimum of 10-15 GB of free space be maintained for optimal system and application performance. If you use iDVD make that a minimum of 20-25 GB free space.
OT

I have a power pc g5 and it will not pass a gray screen

I have a power pc g5 and it will not pass a gray screen, i have read resolution online but the system wont detect my keyboard. have been using a microsoft one normally. tried with an official apple keyboard and still no joy. what can i do?

How to reset the SMU/PMU on a Power Mac G5 (Late 2004) or Power Mac G5 (Late 2005) ...
http://support.apple.com/kb/HT1436
Earlier G3, G4, G5 models...
http://support.apple.com/kb/HT1939
Does it fail all these modes?
Does it boot into any of these modes?
Holding Option/alt key at bootup.
Holding SHIFT key at bootup.
Target mode...
http://support.apple.com/kb/HT1661
Does it boot to Single User Mode, CMD+s keys at bootup, if so try...
/sbin/fsck -fy
Repeat until it shows no errors fixed.
(Space between fsck AND -fy important).
Resolve startup issues and perform disk maintenance with Disk Utility and fsck...
http://docs.info.apple.com/article.html?artnum=106214
We might get clues with verbose mode...
http://support.apple.com/kb/HT1492

I purchased a Holux M-1200E Bluetooth GPS Data Logger. The device paired with my laptop just fine so I know it is working right. The device will not even show up on my iphone or ipad to pair via bluetooth. Is there a way to pair without jailbreaking???

I purchased a Holux M-1200E Bluetooth GPS Data Logger. The device paired with my laptop just fine so I know it is working right. The device will not even show up on my iphone or ipad to pair via bluetooth. Is there a way to pair without jailbreaking??? I haven't had any trouble to date pairing any devic with my iphone or ipad, this is ridiculous!!!! Is there a way to update my bluetooth settings on my iphone 4s to be able to have this device be recognized??? I love my apple devices, but this is very frustrating. I bought this Data Logger for a specific purpuse to help out with my Search and Rescue volunteer activities, and I really need help with this!!! I am hoping apple will help me!!!
Thanks,
Melissa

melissafromlenexa wrote:
That is not the right device, it is the
Holux
M-1200E Bluetooth GPS Logger
I looked at the same sight for that and it does not say that. This is the first time I have posted a question, you don't have to be mean about it. I am trying to get this to work for a good cause.
It may be the best source of assistance is the manufacturer of the device. I suspect you will need a specific app for the iPhone to get it to work, but the site is rather ambiguous about that.

I can not pass the lock screen

I can not pass the lock screen, when I slide to unlock

If you can't get past the lock screen when you slide to unlock, try rebooting your iPad and then try again.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

My mac will not recognise the camera on my iphone so i cannot move my photo's

my mac will not recognise the camera on my iphone so i cannot move my photo's. it has worked fine in the past. i recently moved itunes to an external hard drive and that will still connect for music etc. but the phone does not show up in finder at all the mac just keeps beeping and saying no camera found any ideas please?

Hi Sylvia's iMac,
Welcome to the Apple Support Communities!
It sounds like you need to reset the administrator password on your computer. Please follow the instructions in the attached article for information on how to complete this process. The article has instructions for Snow Leopard (10.6) and earlier, but there is also a link within the article for assistance in Lion (10.7) or later.
OS X: Changing or resetting an account password (Snow Leopard and earlier) - Apple Support
Cheers,
Joe

How to resolve a Lenovo PC that will not pass the Lenovo Splash screen with no access to Windows

Here is my problem and here is the solution!!!
My B540 Ideacentre would not pass the Lenovo splash screen. The only operational keys I had was F1 (BIOS) and F12 (BIOS options). F2 went to a light blue screen so no chance of even a one key recovery. Warrenty had expired four and a half months ago. I contacted Lenovo and after the guy told me to try F2 twice he said it was a HDD or other hardware failure and would cost around £200 maybe and also would take about two weeks.
AT THIS POINT YOU SHOULD NOT BE ANGRY FRUSTRATED OR PANIC. REMAIN CALM AND STOP AND THINK WHAT ACTUALLY WAS HAPPENING WHEN YOU LAST USED YOUR PC.
For me I remembered Windows had auto downloaded 8.1 and was asking me to install. Also my keyboard had lost shift W T Y keys. This told me that it was not a hardware issue but a software issue and perhaps from this update. My HDD was not clicking or beeping and this PC has a 2TB Seagate Barracuda which has a good reputation. Luckly for me I also have a Seagate external expansion 2TB and a 500MB expansion which was the HDD from my old HP Touchsmart which I converted into an external hard drive by buying a HDD enclosure with cooling fan and all leads from eBay for £25 and this is where the solution is.
If you can create an expansion drive so easily and access the HDD then why cant I do it with the HDD from my Ideacentre and of course you can. So first unplug your PC or laptop. Next remove the cover and unclip the HDD (which is easy with the B540. See user instructions). Next I removed my HP HDD from the enclosure and fitted my Ideacentre HDD in its place. Next you need a laptop or another PC. Switch it on and then connect your HDD to the laptop or PC via highspeed USB cable. My laptop is running Windows 7 Ultimate and of course has all the repair tools required. When the software has loaded you may get a box that will have two options. The first will ask you if you want to repair your files and the second to scan for bad sectors and to attempt repair recovery of sectors. Tick both boxes and click start. This is a long slow process but worth the wait. Nine hours later my HDD was ready. I connected my Seagate expansion to my laptop and moved all new files that I had not backed up. So at this point you should create a folder and move all your photos music videos documents etc to it. This can take upto three hours if you have never backed up before and are moving everything. Once completed I shut everything down and replaced the HDD into my Ideacentre. Make sure do not have any external devices connected such as expansions external drives headphones etc. Connect the power and switch on. The Ideacentre booted up and there was a pause at the splash screen then it went to a black screen and then by the miracle of logical thinking I was at my lock screen. I was never so glad to see the map of my home land "Ukraine". After jumping up and down with joy I then went in and all was as normal but to be sure I went into safemode and started a complete restore. This is the option where you completely format your HDD and restore as new. It takes a long time but it is the best option because you do not want this to happen again. When this has completed and you are in Windows do not wait a moment longer by playing with your photos or creating your desktop picture. Go to create a recovery drive (use a 32GB stick) and after that also make a copy to disc. Next go to command prompt (cmd) Admin and change a setting by typing bcdedit /set {default} bootmenupolicy legacy. This will now enable your F8 key to boot straight into safemode just incase you need to in the future. It will slow boot time a little but better to be able to get in to Windows than not at all for the sake of a few seconds.
Well I hope this helps someone out there and I know you may think its a lot to do but it is not. Ask a friend to borrow a laptop or PC and perhaps a HDD encloser. The rest is just time but when you see your lock screen you will not care trust me.
Cлава Україні!!! Героям слава!!!

I thought this was the method I used before but I followed through it and it was a horrific fail. "Operating system not found". Can anyone help?
http://superuser.com/questions/421402/how-to-create-a-bootable-usb-windows-os-us ing-mac-os-x
Steps To Achieve Victory
Download the ISO you want to use
Open Terminal (in /Applications/Utilities)
Convert .iso to .img using hdiutil:
hdiutil convert -format UDRW -o /path/to/target.img /path/to/source.iso
Rename if OS X gave it a .dmg ending:
mv /path/to/target.img.dmg path/to/target.img
Type diskutil to get a list of currently connected devices
Insert USB drive you want to use
Run diskutil again to see what your USB stick gets assigned eg - /dev/disk3
Run diskutil unmountDisk /dev/diskN (where N is the number assigned to your USB stick, in previous example it would be 3)
Run sudo dd if=/path/to/target.img of=/dev/diskN bs=1m (if you get an error, replace bs=1m with bs=1M
Run diskutil eject /dev/diskN and remove your USB stick
The USB stick will now be ready to use
Also similarly described here: http://www.tomshardware.co.uk/answers/id-1733410/creating-microsoft-bootable-usb -mountain-lion.html#.

Macbook numbers 2.1(436) will not open the project from Numbers APP on iPad 2.1(1129) . The error is "index.html is missing"

I updated the numbers APP on my iPad to 2.1(1129) and my Macbook numbers 2.1(436) will not open the project. The error is "index.html is missing".
I think I am having compatibility issues also with my numbers files but the symptom started last week. I have a numbers project/file that has been shared between my iPad and Macbook for several months so I would believe there is no compatability issue with the content. I updated the Numbers APP on my iPad to 2.1(1129) and my Macbook (numbers is current) on 2.1(436) will not open it. I used email the iTunes to transfer the project file. The error is "index.html is missing".
I used ftp to get both a previous file that will open and the new one that will not open onto a server at work and unzipped them. The file format is very different. Indeed the old one has an index.html and the new one has an index directory with a set of files. I know that you can not believe everything you read online but I did see a blurb that Numbers 3 does not need the index.html file but has no other specifics on the files format.
Am I a victim of the 2.1 verson on my iPad not being compatable with the 2.1 version on my Macbook?
Am I now forced to buy a new iWorks or Numbers 3 becasue I updated the iPad APP?
I wanted to find the answer before I purchased a new Numbers if that was not the problem.

Thank you for the insight that the new iPad 2.1 version requires Numbers3 BUT that is not a conclusion I would have jumped to being both are 2.1? Go figure.
You however I do not believe you are correct with the conclusion that I can get a Numbers upgrade. I am on OS X 10.6.8 so not only do I need a new OS, I need a new macbok to run it, according to the APP store it requires OS X 10.9 or greater.
I would like to have known that Numbers 2.1 iOS is not compatable with numbers 2.1 OS X and not taken the APP update.

I am having difficulty in connecting my IPAD 2 to my DRAYTEK 2820n router. Any suggestions as it will not recognise the password but my IPHONE 4 is perfectly OK.

I have just purchased an IPAD 2. I have tried to connect it to my DRAYTEK 2820n router but it will not recognise the correct password. My IPHONE 4 has no problem in connecting to this router using the same password. I understand that the wi-fi connectivity is the same for the two apple products so cannot understand why the IPAD will notr connect. Has anyone any suggestions?

Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

My IPhone 3G will not load the home screen...

Hi
   I am having an issue with my phone. I can't get the home screen to load. I get the Apple Logo screen then it disappears and I get the black screen with a spinning beachball/gear ( like it's trying to load). A couple of days ago I had my phone in my bedroom on my night stand, charging. One of my schnauzers in the attempt to get on the bed, got tangled in the cord and pulled it off the stand onto the floor ( about a 2 foot drop ) ::note:: I do have an otter box on the phone. The phone seemed okay until this afternoon. I updated 4 apps and later I picked up my phone to call my husband and I had the spinning gear screen.
   After searching and googling a bit I came across some "fixes" One said to hook up to my PC and restore the phone via ITunes. Okay I tried this, at first I got an error saying there was an unknown error. After a few tries the phone started to restore. It comfirmed that my restore was a success and I then began a sync. After the sync had finished I was back to the apple logo screen :/
I tried this fix also ( it's been helpful for others, just not for me )
1. Connect to iTunes via USB. Do not disconnect for rest of these steps. iTunes may appear frozen or stuck with spinning beachball....this is okay, do not Force Quit iTunes. I tried a few times w/o it being connected to iTunes and it doesn't work.
2. Once connected, hold Home + Power until screen blinks then Apple logo comes back up.
3. Wait until Apple logo dims slightly (~5 minutes or less). Do NOT reboot until the apple logo dims.
4. Hold Home + Power again until it reboots and Apple logo comes back up.
5. After 2 min or so, the phone may vibrate once or twice. Continue waiting for the full 5 min until Apple logo dims slightly. iTunes at this stage MAY recognize the phone...do not sync or do anything in iTunes.
6. Hold Home + Power for the 3rd time until it reboots. Phone may vibrate again after 2 minutes or so. Eventually you'll break into your Home screen.
Still, my home screen will not load :/ Any help would be much appreciated. I live in a rural town with no Apple Store. I got my phone from an individual, would they even help me out ( Apple Store)? I'd have to drive about 80 miles round trip to get to an Apple Store. If there's a fix for this, I'd very much appreciate it
Thanks in Advance,
    Candy

Anyone? C'mom, I know some of you techie type folks know how to fix this!

Itunes will not display the home screen apps

when I connect the usb cable to my Ipad and into my laptop, and connect with itunes it will show everything But the home screen apps, what could be causing this to happen

Hello ipad3iphone4,
I have located an article that may help you arrange those apps. It contain some helpful hints on how to manage them via iTunes:
iTunes 11 for Windows: Sync and organize iOS apps
http://support.apple.com/kb/PH12315
Thank you for contributing to Apple Support Communities.
Cheers,
BobbyD

We have 20" screen firefox will not display the hole screen only 1/3 in the middle

firefox only displays about 1/3 of the screen. it's all in the middle of the screen. we have to use internet explorer to be able use the whole screen

You need to put Firefox in Full Screen Mode.
To do this, click the Firefox button in the upper left corner. Then click the full screen button.
To exit full screen, mvoe the mouse to the top of the screen, right-click on the tab strip, then click '''Exit Full Screen Mode'''.

HT6154 How do your fix a Iphone 5 32g will not pass the apple logo in boot up?

I plug in my iphone 5 to the charger cube and all my phone does is turn on with the apple logo. Then the apple logo turns blue and shuts off. I then repeats this cycle as a loop. I have tried the recovery mode step and when itunes response to the phone, the reboot loop happens again. I am out of solutions. Please help. I am out of warrantee with and had this phone for a 1year and 5 months.

Hey iphone5lemon,
Thanks for the question. If your iPhone is not booting past the Apple logo, please contact Apple Support as outlined in this resource:
iOS: Device unexpectedly restarts, displays Apple logo, or powers off
http://support.apple.com/kb/TS5356
Make sure your iOS device is up to date. If you still see this issue after updating, contact Apple Support.
Thanks,
Matt M.

My battery will not last the day on my iphone 5

I have everything turn off
Still after a full charge over night by 6 Pm my battery is almost dead
I do not play all day on this phone it for e-mail and text for work

Do you have a work email account on your iPhone? Is it an Exchange account?
If yes, contact your Exchange administrator in your IT department and have him check your account. He will probably see constant polling from your phone and can help you resolve this.

Although my apple ipod is 4g it seems to quit accepting the cd's I am trying to download and now will not allow the remaining 2.5gb available on my ipod...help?

Although my apple ipod is 4g it seems to quit accepting the cd's I am trying to download and now will not allow the remaining 2.5gb available on my ipod.
Can anybody out there give me any clues as to why my apple ipod won't allow my remaining 2.5 gb of ipod space to download anymore of my cd's. I am using Itunes library which also doesn't seem to accept the cd's even though they are legitimate in every way and are not homemade.

- Unjailbroken iPod never showed % battery. Just the icon.
- Unjailbroken iPod Touches never had a disk mode.
- What happens when you try to drag a wiggling app to a empty space in the bottom? Does it move and snap back?

Infoblox Captive Portal will not pass the "Accept" screen on Iphone or ipad 6.1.2

Similar Messages

Maybe you are looking for