Infocube 0PS_C01 not available in BW Business Content& query 0PS_C02_Q0005

Hi
In Project systems module, the Infocube 0PS_C01 not available in BW Business Content& also queries relevant to the infocube are alos not available.
how to get the relevant infocube. Please let me know.

Hi,
Check the relevant Datasource for your Infocube in help.sap.com. Install from RSA5 and RSA6 in ECC side.
Replicate in BW and Install your Cube from BI content.
Actually you can check your cube in Meta data repository.
Regards,
Suman

Similar Messages

  • Help! Infocube 0SEM_C02 not available

    When i am creating new initiative for my balanced scorecard the warning message appears: 'infocube 0SEM_C02 not available', though i've activated 0SEM_C02 infocube. Whats wrong?

    I wrote, that I have already installed the cube. And this cube is visible in modelling area in active status...
    Cube 0SEM_C02 is also available through 'listcube' and 'listschema' transactions.
    But
    1) I start UMB_CUST transaction
    2) Then i create or edit initiative
    3) Select 'General' tab
    4) I mark flag 'SAP standart settings' in 'Data source for value fields' frame of 'General' tab.
    After that, message 'Infocube 0SEM_C02 not available' apperars.
    Name of infocube and BW report name becomes red!
    BW 3.5, SEM 4.0
    Message was edited by: V.M. Zosidze

  • Finding data in a datasource/ Business Content Query

    Hello,
    can you help me with this one -- background to this problem is shown below:
    Question:
    1.
    No data was found in my infocube so I went o R3 to see if the datasource had any data in it by running rsa3 but found no datasource 2LIS_02_S012, although rsa5 shows that it exists. What could be happening?
    2.
    Also, how do I see the queries which come with the InfoCube? When I go into BEx, I see the dimensions to create my own queries, but where are the ones which comes with the Business content for me to use?
    Background to Questions----
    I was experimenting with an MM InfoCube 0PUR_C01, and my research indicated that the datasource which supplies this this infocube with data is 2LIS_02_S012. The notes on this datasource indicates it could be extracted as a standard extraction or LO. I did standard, rsa5, rsa6, etc...replicated in BW, etc.
    I later created and InfoCube zpur_c01 and copied from 0pur_co1, etc. ...then later created and infopackage and loaded data into the InfoCube for the purposes of reporting.

    Hi Caud,
    To answer your first question.
    - The datasource 2lis_02_s012 that you have seen in rsa5 is in the delivered version you need to transfer this into the active version. Select the datasource in rsa5 and click the transfer datasource button. After you have done this you will see the datasource in rsa6.
    Also since this datasource is a Logistics Info Structure the LIS reporting should have been activated and in use.
    For your second question
    - If you have already identified a standard business content query that you want to use through the metadata repository, you can activate the report through the business content tab in rsa1.
    Hope this helps.
    Regards,
    Demetrius

  • Error While Installing the Business Content Query

    Dear Friends,
    We are in BI 7.0 and trying to install a business content query "Balance Sheets Profit and Loss Statement" but while activating we are getting the error that some Particular Request has not been found or not suitable. we checked for that request in SE09 and found that there is no such request existing in the system. So what could be the cause of the Error and what to do for successfully Installing the Query.
    Thanks ..
    Anurag

    Are you assigning a new request or  creating a new one? Try to assign to a new request if you are not doing so.
    Thanks
    Wind

  • Query.setRange() not available on standard javax.jdo.Query interface?

    Hi Kodo people, I'm trying out Kodo 3.2.0, most specifically for the
    spiffy new setRange() functionality. However, I'm somewhat confused
    because while the docs clearly indicate that the setRange() method is
    available on the standard javax.jdo.Query interface, it's not available
    on the javax.jdo.Query class that ships with Kodo 3.2.0. I have to cast
    my query to a KodoQuery in order for this to work. Is this expected?
    Thanks,
    -Mike
    Michael Allen
    Technical Lead
    PGP Corporation

    I think you missed the note at the beginning of the query chapter in the docs:
    Much of the functionality we discuss in this chapter is new to JDO 2. Though
    Kodo supports all of the features defined in the following sections, many JDO
    implementations may not. Additionally, because official JDO 2 jars are not yet
    available, you will have to cast your query objects to kodo.query.KodoQuery to
    access any JDO 2 APIs. The UML diagram above depicts these APIs in bold. For
    simplicity, casts have been left out of the example code throughout the chapter.

  • Business Content Query

    Hi All,
    I would like to know the importance of Business Content Query, Like:
    1. why they are used?
    2. What is the advantage of Business content query against a customized query for a Business content cube?
    Any help would be appreciated.
    regards
    Praveen

    Hi Samala,
    For each Module we have Business content queries
    for example : SD,MM,PM,PP etc For these we have business content queries.
    We take SD as eaxample: SAP has given business content quries in SD, If the client satisfis with the Business content query, There is no need to create new query. We can use the same query.
    If the client has some new requirement like adding 1 extra field to the business content report, at this time we need to customize the query.
    Advantages of Business content : No need to create new query, Lot of time and manpower save
    Regards,
    Marasa.

  • HI not able to see business content in sap bi7.0

    Hi GUru's,
                     We have upgraded from BW  to BI 7.0 recently,
    but we are not able to see any business content objects like 
    0sd_co1.predefined objects in rsa1 screen
    Can anyone please help me out.

    Hi Venkat,
                     did u check it out for the BI component.
    check in your sys..........
    menu -
    > system----
    > status.
    If itz not there try to install the BI component.
    Regards,
    Vijay.

  • Update rule could not be found during business content activation

    Dear BW experts,
    I am having an issue activating business content for an update rule (2LIS_03_BX) for 0IC_C03.  Below is a log of the error.  It seems like the system is not recognizing the update rule for some reason.  Can somebody please help shed some light on this. 
    Installation (simulation mode) of: Update Rules (UPDR)
    Transfer/Merge of the Content Version (Object Type Update Rules )
    Object Update Rules BW9VUFZSUYTTIZS0HT9I4U3RP: Installation of the Content Version
    Transfer update rules IC: 0IC_C03 / IS: 2LIS_03_BX
    Object UPDR BW9VUFZSUYTTIZS0HT9I4U3RP could not be found
    Transferring the 1 objects from type UPDR took 1.2 seconds
    Post-processing of Objects after activation
    The post-processing lasts 0.0 seconds
    Thank you.
    Andrew

    Ravi,
    Thanks for you reply.  I checked the underlying cube (0IC_C03) and the info source (2LIS_03_BX) and they are both active.  I didn't choose the option in data flow before and after because it would have brought way too much contents which I don't need.  Instead, I only activated the info source and update rule individually. All three info sources (2LIS_03_BF, BX, UM) and the info cube were successfully activated.  I am only having problem with the update rule.
    Any other ideas?
    Thanks,
    Andrew

  • Update rules not getting installed from business content.

    Hello,
    One more major issue I am seeing is that my update rules for some cubes (0PUR_C01)are not getting installed at all from business content and the errors i am getting are like datasource 0vendor_text not maintained and then there is long list of such red lights. when actually I can see most of the datasources active in the datasource tab on BW side.
    So i dont know how to get these update rules working.
    Please advice,
    Thanks

    Hi Mukund,
    please see also the answer that I provided to your thread
    <a href="https://forums.sdn.sap.com/thread.jspa?threadID=121274&tstart=0">Strategy toward new and 3.x datasource / infosource</a>
    In addtion, you might want to check
    <a href="http://help.sap.com/saphelp_nw04s/helpdata/en/84/497e4ec079584ca36b8edba0ea9495/content.htm">help.sap.com DataWarehouse</a>
    and the online documentation for more general information about data modeling / acquisition.
       Cheers
          SAP NetWeaver 2004s Ramp-Up BI Back Office Team

  • Not Able to Install Business Content Objects

    Dear all:
    We have installed BW 7.0 Dev environment in our server. Now we are trying to install BI content into BW. But when we moved to "Business Content",we only see several catalogs like technical content, BEx Personalization, BI Trace Tool, instead of standard Business Content for different business scenario. Is there anything else we should import into our new-installed BW 7.0?
    Thank you very much
    BR
    S.F

    Hi Sf,
    I'd go Support Packages and Patches> SAP NetWeaver> SAP NETWEAVER> SAP NETWEAVER 2004S> BI Content for SAP NetWeaver> BI CONT 7.03
    Let us know your progress.
    Cheers,
    Sarah

  • Error in Business content Query

    Hi,
    we have activated the business content for General Ledger (New). We have successfully executed all data loads.
    but, the standard query 0FIGL_V10_Q0001 which is activated, is not executing properly.
    It throws up a message "Value '0' is invalid for property 'Ref. Characteristic' of element 'Balance Sheet Value'" and no data is displayed.
    On analysis, we find that, for the calculated key figure Balance sheet value the Ref. characteristic in the Aggregation tab is set as [0]0.
    Has anyone faced this issue before. could anyone help us to fix it?
    Regards,
    Sainath

    Hi,
    Please apply the note 1015402 to resolve this issue.
    Best Regards
    Manoj Kumar

  • Business Content query cant able to see in Bex.

    Hi BW Experts,
    I have installed the query 0PS_C04_Q1000 from the business Content.After installing, I couldn’t find the query in Bex analyzer. But in the business Content the query is showing that it is already installed.
    Can u pls help on this issue.
    Thanks,
    Jelina.

    RRMX->Open Queries->do a search giving the query name 0PS_C04_Q1000 in Description/Technical Name area and click ok. If it is installed properly, you should find it here.
    Also check table RSRREPDIR  if you can see it. If not, re-install the query from BI content again and try.
    Hope this helps..

  • Error During Business Content Query Activation- Very Urgent

    Hi All,
    I am trying to install few queries in business cube 0pur_c01, which is already in production and already lot many queries are running.
    As per requirement i have to install  New quries in the 0Pur_C01
    0PUR_C01_Q0012 : Ordering Activities
    0PUR_C01_Q0015 : Purchase Order Values
    0PUR_C01_Q0013 : Vendor Comparison re Purchase Values
    0PUR_C01_Q0004 : Values – Purchase Order – Delivery – Invoice
    0PUR_C01_Q0023 : Total and Average Order Value
    Out of these five quries i am unable to install  0PUR_C01_Q0012 : Ordering Activities and geeting error message during simulate install rest queries has been installed already without any issue once i have unselected the already transported
    element.
    I am doing the same for  query 0PUR_C01_Q0012 : Ordering Activities but getting error message
    Error when activating element 9W6JIW7YMO04XVOZ5ATLLFLPB
    BEx transport request 'SBDK900497' is not available or not suitable
    Regards
    Premanshu Gupta

    Hi,
    To rectify this error,
    <i>BEx transport request 'SBDK900497' is not available or not suitable</i>
    Go to Transport Connection, there click on "BEX" "Create tranport request for BEX", there insert a new row, and create a new request. This is the default request for BEX queries.
    While transporting , dont tranport this request, collect the objects which you want to tranport and create a new request.
    <i>Error when activating element 9W6JIW7YMO04XVOZ5ATLLFLPB</i>
    For this error, check the object in meta data repository, whether the object is in active version or not.I think this object is not in Active version thats why you are getting this error.
    Assign points if it helps....

  • Folders not available in SAP Business workplace(SBWP)

    Hi,
    When i click on any of the folder in SAP Business workplace,the folders are getting disappeared and i am getting the message "Folder inbox no longer available".
    Please let me know if any one you have faced the same problem.
    Regards,
    Kumar

    Hi,
    I have already refferd this Note,but this doesn't solved my problem.
    Please let me know if there is any  workaround for this issue.

  • To modify or not to modify standard business content

    There is a debate going on in my company about whether or not to modify the SBC cubes.  One suggestion is if it is necessary to modify them, copy them to create a custom cube and modify that, keeping the SBC in tact for future reference or use (recommended R/3 practice) and others say that doesn't make sense, just modify the SBC cubes-stay away form creating custom cubes.
    Is there a strong opinion out there to do one or the other?

    Anurag,
    just some point to your answer...
    If reporting and analytical capability that Lisa needs to achieve is available totally only through SBC std scenario, this question is out of scope!
    Then,
    1.
    "if you copy the SBC and create your own cubes and other objects it is as good as creating a new datawarehouse"
    What does it mean ?!
    First of all, she has to copy only the cube and nothing else (surely not the std objects contained into it!).
    Your sentence is valid if related to infosources (and, generally speacking, to extraction-side objects), but not for cube (copying the std to have a custom one to adjust it to specific needs is a common activity).
    2.
    If in the future SAP comes out with some new version of the same std cube, you have to pay attention to avoid that the new delivered version overwrites the custom one ! It's exactly the opposite !
    3.
    Upgrade to future release is easier, but what about different requirements that the std content doesn't fit ?
    Bye,
    Roberto

Maybe you are looking for