Infocube activation

HI Experts,
the infocube contains 3 years data and we are added 1 field to the infocube with out deleting the data.when we try to activate the infocube its taking lot of time and before we have added field to the datasource , written customer exit and replicated production bw system.
Regards
Rk
Edited by: kolli sivaraju on Oct 12, 2009 12:31 PM

HI,
Trying to change in production is not advicable. If you are in BI 7.0 try to use Remodelling toolbox for adding a new charachteristics which will help you in proceeding thro transport management system.
Your system is already transport management system hence if you are trying to change it will ask for a transport without transport request you wont be able to activate it. You have to assign it to a transport request for activation.
Hope your system is in open state.  Keeping production system in open system will make the production,dev and quality system
out of synch on proceeding with design changes
Thanks,
Arun

Similar Messages

  • SPO based on Infocube activation issue

    Hi All,
    I am getting below error while activating the SPO based on Infocube. We are on BW 7.31 SP03.
    Please let me know if you face this issue...
    Error message -
    Call of the method CONSTRUCTOR of the class CX_RSLPO_OPERATION_FAILED failed; wrong type for parameter MSGV3
    An exception with the type CX_SY_DYN_CALL_ILLEGAL_TYPE occurred, but was neither handled locally, nor declared in a RAISING
    Internal error:
    Internal error: CL_RSLPO_PARTITION GET_S_DBPART

    Issue has been solved after adding the below auth objects to role.
    S_RS_LPOA & S_RS_ISNEW

  • InfoCube Activation Problem

    Hi Experts,
    I used BI 7.0 version, i phased one problem with infocube.Data is uploaded from flat file.I uploaded 30 records from flat file.
    1) when i activated the InfoCube the activation is sucessfully completed.But the version is IN PROCESS (we have three version Active, Modified, In version)
    2) I activated the "InfoCube several times but the version is IN PROCESS
    3)In the Message Text : NO ACTIVE BIA INDEX AVAILABLE.NOTHING TO BE DONE
    4) Update and Transfer Rules all are in activated. When i scheduled the infopackage the message was :Data was Requested.Monitor is sucessfull again i phased one problem the 30  records status is Active<--->Inactive.How to change the Records status into Green color. I checked Process manually  also.
          In  Status tab All IDocs processed successful......
          In Details tab : Overall Status : Everything Ok (all are in green colour
    When managed data targets  In the Request ID tab status is Yellow. In the BI content functinal area i was not able to find  the InfoCube which was already creatrd .I searched InfoCube with technical name also.it showed to me  ~~No corresponding entires were nor found~~ How to get the infocube into BI content.Is the any realtionship between infocube and BI content could you pls  explain  to me .
    Thanks & Regards,
    Vikas.

    Hi,
    Try this.
    Make sure that the update rule, transfer structure, and related info objects are in active state. If you see the error message itself says that Update rules are inactive (Update rules from InfoSource 8PO_DSO for InfoProvider PO_CUBE are set to "inactive").
    This may help.
    Thanks,
    JituK

  • Problems with FI Infocubes activations

    Dear Reader.
    I am having trouble activating the FI infocubes (GL, AP, AR AA) in DEV, QAS, PRD.
    In BID the infocube looks active with active transfer rules, etc.. in the infoprovider list but when i double click the infocube it shows "in process". how is this possible. without noticing this initially, i transported the infocube from DEV to QAS and to BIP. How to activate the infocubes. I need to schedule the data in PRD from tomorrow and i am having this crisis. YouR help in this matter will be highly appreciated and also further, do i need to activate all the BCT objects again in DEV and then transport again to QAS & PRD.???

    Hi,
    There is no problem in having version as In progress.
    Object information :
    Save : Saved
    Revised Version : Active Version
    Object Status : Active executable
    If object information of your FI cubes matches with above mentioned statuses then you should be able to load data succesfully. You will get above statuses under Version tab only.
    Please let me know if you need more information.
    Regards,
    Viren

  • New Infocube activation running forerver

    Hi All
    We recently upgraded our support pack to latest 25, for testing purpose we are creating new info cubes and tried to activate it, but activation is running for more than 1 hr and not finished. Is there any configuration issue or some program error ?
    Thanks in advance.
    Raghu G

    Hi Raghu,
    Before activating info cube or DSO first check the design, then if you have any errors it will shows.
    first check if you have any errors.
    then do the RSRV checks fo CUBE, follow the below steps
    1)goto RSRV
    2)drill down  transaction data-->double click on "Fact- and Dimension- Table of an InfoCube ".
    give your cube and execute.
    then correct the errors and activate again
    Regards,
    Venkatesh

  • Infocube activation issue

    hi experts,
    i have added 2 info objects into the already existing info cube (0RT_C37), and while activating the info cube it is giving below error message.
    Object 0RT_C37 could not be activated
    Message no. R7I028
    Pl provide us the solution to activate the info cube.
    regards

    Hi experts,
    thanks for the responses.
    i tried to activate the cube through RSDG_CUBE_ACTIVATE. please check the below error messages
    Error when activating; Please analyze log
    Message no. R7605
    The SQL statement was not executed
    Table /BI0/D0RT_C371 (Error adjusting the database)
    Message no. DT007
    Diagnosis
    The definition of the table in the database could not be adjusted to its definition in the ABAP Dictionary.
    Procedure
    Look for further information about the error in the log.
    Using the analysis tool of the database utility, check the consistency between the definition of the table in the database and its definition in the ABAP Dictionary.
    and checked below NOTE.
    SSN 999596
    checked the entries in RSOTLOGOIMPACT table, and the entries are already maintained.
    pl provide us the solution.
    Regards
    venuscm

  • Scheduling infocube activation in background

    It is taking too long and timeout when I tried to activate a SAP delivered InfoCube.  Can this be scheduled in background job?

    Hi
    Why are you trying to activate an Infocube. It is the DSO/ODS that you need to activate and not a cube. And by the way which process are you following to activate the infocube ???
    There is something definitely wrong in whatever you are doing friend.
    Cheers
    Umesh

  • Activation the Standard reports for SAP CRM IN BW 3.5 Version

    hi guys
    I am working on SAP BW 3.5 version
    I have Activated the Satadard Reports for CRM Campaign, Lead, Opportunity in BW 3.5  Business Content
    But I don't find  the any single Standard Report in BEX.
    I followed these Steps ;
    BEX - Open - Queries - Info Area
    If any One Knows please let me Know, Urgent Requirement
    thanks in Advance
    Suma

    did u try to see that reports in metadata repository
    login to bi system
    enter RSA1
    on the left panel select METADATA REPOSITORY
    select LOCAL OBJECTS
    then hit Query
    TRY TO find ur REPORTS WITH TECHNICAL NAME
    if it exists here than u shuld be able to seee in infocube.
    if that doesnot make sense
    go back to LOCAL OBJECTS SCREEN
    hit INFOCUBE
    locate ur infocube and select it
    now everything with respect to infocube active and available is visible
    all char catalog, keyfig catalog, queries etc....

  • Transport error while adding new Navigational Attr to InfoCube on BIA

    Hi Gurus,
    I have added a new field in the Profit Center Master data(0PROFIT_CTR_ATTR) in R/3 and the changes seem to be working fine in BW. This 0PROFIT_CTR is present in one of the InfoCubes that we have on the BIA. I have turned 'ON' the newly added Navigational Attribute in the InfoCube and have saved the changes. Now when I try to transport these changes to the QA for testing, the transport is getting cancelled with the message 'NOT CORRECT USAGE' in rsddtrex.
    I am wondering if this is because I have added and turned'ON' a new Navigational attribute in the InfoCube under the BIA.Maybe the BIA index and the the InfoCube structure do not match because of this newly added Nav Attr in the InfoCube?
    Do you have any suggestions on this. I was under the impresiion that even if this was the case, the transports should succeed and only the rollup to the BIA process should fail in the BIA rather than the transports to QA.
    Any suggestions?
    Thanks
    Arvind

    Hi.
    Did you check if note 1223284 was applied in yor system ?
    1223284 - BIA index set to inactive 'A' after InfoCube activation.
    Thanks,
    Walter Oliveira.

  • Infocube data loss after BW Upgrade to 7.01 (SP 7)

    HI,
    We have recently upgraded from BW version 3.5 to 7.01 SP 7. It has been noticed that the pre-upgrade data from all the Infocubes have been wiped off since the upgrade. Data that were loaded into the cubes post-upgrade are fine though. The "Manage" screen on each of these cubes shows that all the data load requests (pre and post upgrade) are intact, however the underlying F & E tables do not have any of the pre-upgrade data (which sort of means that this data wasn't deleted from a BW transaction). Also, this has happened only for the Cubes - Master Data and DSO data seems to be fine.
    Prior to the BW Upgrade, the underlying OS & DB were upgraded to versions AIX 6.1 and DB2 9.7 FP2 respectively. The data in the cubes existed after this step.
    Has anyone seen or come across this issue before during the actual upgrade or any of the post-processing steps after that? Any help here will be appreciated!
    Thanks
    Anooj

    Hi Anooj,
    The note says that :-
    When a cube in a source system contains no data, a user can set the
    Line Item flag to TRUE for a particular dimension. If the user then
    decides to transport this into a target system in which the target cube
    DOES contain data, the dimension table is dropped and recreated. As a
    result, DIMIDs in the Fact table now point to invalid entries in the
    new Line Item dimension. This change should NOT be permitted and the
    cube activation should be aborted instead.
    Was the Line Item flag set in your infocubes , which may have led to the loss of data.
    becuase SAP seems to be mentioning more on the Line Item flag side , or is it generally for the program for Infocube activation.
    We have found that we lost the data in the CUBE , though there is no line item flag active.
    Regards,
    Hari

  • Infocube not available in the report

    Hi Gurus,
    I created an Infocube , activated and loaded data successfully from ODS. I saw in manage, cube is available for reporting but when I search the cube in BEx to create a query on it , It is not available. Do you know why it is not available in BEx.
    Thanks
    Liza

    Liza,
    Click on the create icon (blank page) and then go to the InfoAreas. If it is a new cube, it will not show up in the InfoAreas, until a query is created against it.
    Also check your reporting authorizations
    Jaya

  • Data Load from ODS to Infocube

    Hi All,
    I have been trying to load Data from Standard ODS (activated from Business Content) to InfoCube (activated from Business Content). The records are present in ODS and it has been activated. However, when the load was scheduled and run for the Infocube, the data did not show up in the "Infocube" content and "Fact Table" as well. When I looked at Infocube->Manage->Requests, it showed transferred records as 21 (same as shown in the "monitor" of the existing request) and added records as 0. Similarly for other requests in the cube, it showed the same way. The only difference was the number of records (eg 178 or 48, etc). The number of entries for Fact table was 0 and the it is not compressed. The cube name is 0BBP_C02. Can any of you come up with an idea towards the solution to this problem.
    Thanks

    Hi Saura,
    Check start routines in the cube URs.
    For example, in my system for 0BBP_SC ODS object as infosource I see the start routine:
      LOOP AT DATA_PACKAGE.
        IF NOT ( DATA_PACKAGE-BBP_RELSC = 'I1129'
    *    if shopping cart is approved
          AND DATA_PACKAGE-BBP_ORIGIN = 'B' ).
    * and record originates in BBP
          DELETE DATA_PACKAGE.
        ENDIF.
      ENDLOOP.
    As you can see, records not conforming some conditions are deleted.
    The similiar routines you can find in another URs.
    Best regards,
    Eugene

  • Line item dimention

    hi experts,
    what is line item dimention. when it is used.what is the importence of it in creating cube
    puli

    Hi Sridhar,
    It is very often possible in the data model to assign only one characteristic to a dimension.This will probably occur with specific reporting requirements or if for example you have the document line item in your model.
    In these situations a dimension table means only overhead. BI allows you to define this kind of dimension as a line item dimension (Check box dimension definition). In doing this no dimension table will be generated for this dimension. As dimension table will serve the SID table of this characteristic. The key in the fact table will be the SID of the SID Table.
    The fact table is created during InfoCube activation. The structure of the fact table in the BI data model is the same as it is in the normal Star schema. The keys of the dimension tables (i.e. the DIM-IDs) or the SIDs of line item dimensions are the foreign keys in the fact table.
    If all dependent attributes of a characteristic are navigational or display attributes in the characteristic’s master data table or nodes of an external hierarchy, then remember you have the option to define this characteristic as a line item dimension.
    USE OF LINE ITEM DIMENSION:
    As the BI schema does not enforce that you put a parent attribute into the same dimension table as its child attribute, it is often worth thinking about locating parent attributes in their own dimension table (e.g. with 100,000 article and 2,000 article groups why not put the article group in its own dimension table if queries are
    often reported at article group level?)
    Hope this helps.
    Thanks,Ramoji.

  • Navigational attribute in selection screen gives no applicable data

    Hi Gurus
    In the report i am using the navigational attribute in the selection screen.e.g Brand (attribute of material)
    My problem is whenevr i enter value in the navigational attribute (brand)  in the selection screen and execute  its says no data found.
    If i do not fill this parameter and fill only the parent attribute (material)  in the selection screen  , then i can see the results and from its properties  (drilling down )i can see the values of brand .
    If the values of brand exist why via selection screen its not giving vales, However Via material i can drill down and see brand values.
    I have done all the necessary steps to make this attribute as navigational.
    On top of this i have this same navigation attributes as one of the characterisitc in the cube.
    Thanks
    DD

    Hello,
    I've the same problem... for new nav. attributes for 0Material.
    Settings for nav. attibutes in BEx Q.D. are OK.
    But in BEx Analyzer:
    1- not display all values for this attributes. Some values are displayed, some don't.
    I try display it with and without selection screen.  The result is the same.
    2- I try to display (normal) attributes - not nav. In this case everything is OK.
    But I've 2 columns: normal attribute for all values and nav. attribute only with some values...
    (the query is something like: 0Material + 0Material_NOTnav_attr + 0Material_NOTnav_attr)
    It isn't a normal...
    I don't know... Maybe it's depend of the time?
    I can't clear all master data for 0Material, because they're used in some cubes. I had old characteristic without nav. attr. but with master data. I added nav. attr. in 0Material and activated it. Next I load master data (full method). Then I added nav. attr. in infocube, activated it, delete and load data into the cube (Init + Delta).
    If I display data for the cube in RSA1, I can see nav. attr. for all records. I can't see it in BEx Analyzer...
    Can U explain it?
    Thx,
    MSzN

  • Cube Problem

    Hi Friends,
    I'm unable to see cube on infopackage level.I have created infopackage but my datatarget(cube ) not coming.
    1. Infocube ( Activated executable)
    2. Update rules activated (Everything perfect)
    3. I checked infosourece (Correct)
    4. Infosource assignment also correct.
    I think problem with cube...What's the problem
    Please help...
    Regards,
    Nag

    Hi,
    No chance . It should come there if the update rules are in Active.
    After activating the UR , Clcik on refresh button in INFOSOURCE tree.
    With rgds,
    Anil Kumar Sharma .P

Maybe you are looking for