Infocube activattion failed

hi all,
my infocube is not activating.
the error is
SQL statement was not executed.
/BIC/F....(error adjusting the database)

Hi,
Try to repair the InfoCube..Go to RSRV -> All Elementary Tests  -> Transaction Data -> Fact- and Dimension- Table of an InfoCube. Double click that and then give the InfoCube name. First execute and see if it gives any red signal. If it gives then click the "correct error" push button.
While deleting the data did you selected "Fact and dimension data"?
Hope this helps.
PB

Similar Messages

  • Infocube to Infocube load fails

    Hi Experts,
    When i run a full update from once infocube another infocube, the load fails with the following error message..
    [IBM][CLI Driver][DB2] DSNT408I SQLCODE = -204, ERROR: SAPR3./BIC/VCSAPICSOF IS AN UNDEFINED NAME.
    Can anyone help me with a way to make the load work???
    Thanks,
    DV

    make sure the structure will be same other wise the errors will trigred like any thing

  • Upload of InfoCube 0SD_C03 fails due to "#" in 0PO_NUMBER

    Hello everybody,
    I cannot upload data into 0SD_C03, due to the error "#" is invalid character.
    I have checked the data coming into the cube and in 0PO_ORDER we have vale like this: "SIBN /#3".
    What is confusing me a little bit is this: if I change the update rule and set the constant "SIBN /#3" it is fine. But if the value is coming from the ODS before, it fails
    The ODS is of course not BeX enabled.
    Any help appreciated.
    Pawel

    Hello everybody,
    I have reproduced this error while loading into BeX Enabled ODS (it failed during activation).
    Then I have checked the long text of he error. There was a magic link: <i>if you want to know more about special characters in BW click here</i>. As I would like to know more about special characters, I have pressed and there was a nice documentation regarding this topic:
    according to this documentation (see below) it is not possible to have "#" within a string.
    For me it is the end of the story. If anybody knows something new about this, please let me know.
    I will close the topic.
    Pawel
    <b>Invalid characters
    The following characters are not permitted in characteristic values and cause errors in the system:
    </b>!
    Control characters with the hex-display 00 to 1F, if lower-case letters were permitted
    Characters with a hex-code that represents lower-case letters in one of the installed languages
    You can validate lower-case letters for any characteristic. You change the settings in the InfoObject maintenance screen- on the 'General' tab page- by selecting the lower-case letters option. If you select this indicator, the system does not run a consistency check for the characteristic values, and the system makes no distinction between capital and lower-case letters in the maintenance screens for variables.

  • Infocube data loads fail with UNCAUGHT_EXCEPTION dump after BI 7.01 upgrade

    Hi folks,
    We're in the middle of upgrading our BW landscape from 3.5 to to 7.01. The Support pack we have in the system is SAPKW70103.
    Since the upgrade any of the data loads going to infocubes are failing with the following
    ABAP dump UNCAUGHT_EXCEPTION     
    CX_RSR_COB_PRO_NOT_FOUND.
    Error analysis                                                                  
        An exception occurred which is explained in detail below.                   
        The exception, which is assigned to class 'CX_RSR_COB_PRO_NOT_FOUND', was not
         caught and                                                                 
        therefore caused a runtime error.                                           
        The reason for the exception is:                                            
        0REQUEST is not a valid characteristic for InfoProvider                     
    Has anyone come accross this issue and if so any resolutions you adopted to fix this. Appreciate any help in this regard.
    Thanks
    Mujeeb

    hi experts,
    i have exactly the same problem.
    But I can`t find a test for infoobjects in rsrv. How can I repair the infoobject 0REQUEST`?
    Thx for all answers!
    kind regards
    Edited by: Marian Bielefeld on Jul 7, 2009 8:04 AM
    Edited by: Marian Bielefeld on Jul 7, 2009 8:04 AM

  • Data load failing in update rules

    Hello All and happy New Year!!
    Please provide assistance to solve this error - a full data load into an InfoCube is failing in the update rules with the error “ABORT was set in the customer routine 9998".
    Your assistance will be highly appreciated.
    Regards,
    Keith

    Hi Keith,
    You need to check the start routine in the update rules...this is what the message is referring to. You can also debug the update rules if you like...in the debugger screen search for 9998 to get to the Start Routine code.
    Hope this helps...

  • How to debug compression of InfoCube

    The compression of our InfoCube is failing.  Can someone recommend places in the code where I can set breakpoints so that I can troubleshoot this issue? 
    Thanks.
    Ron

    Couple checkpoints if you are using non-cumulative cube check this
    985774 - Compressing non-cumulative cubes creates incorr ref points
    Also did you try manual compression or its process chain enabled,could be load running while you doing compression??
    what exactly is the error message
    Hope it Helps
    Chetan
    @CP..

  • Setting IT performance report in Solman

    Hi,
    We are trying to set up IT performance reporting in Solution Manager. BI client is same as production client. The Info objects are not getting activated. The job fails with the message to use a different BI client.
    SOLMAN SM37 Job log:
    Message text
    Message class
    Message no.
    Message type
    Job started
    00
    516
    S
    Step 001 started (program CCMSBI_SETUP_BATCH, variant , user ID KZHX33)
    00
    550
    S
    Incorrect client 025
    00
    001
    S
    use BI client 001.
    00
    001
    S
    Prerequisites check failed
    00
    001
    A
    Job cancelled
    00
    518
    A
    If any one faced this issue and resolved, kindly throw some light on it.
    Thank you.
    Regards,
    Manju

    Hi Manju,
    The issue is due to inactive object in the infocube .
    Please check the note: 1110013 - ST: Manual activation of BI Content for E2E Diagnostics SP13 attachment . it will help to activate the inactive object.
    or
    Go to basis configuration -> step 5. configure automatically ->re-excute the Activate BW Source System. so it will reactive the infocube.
    Also check the below discussion,
    CCMS_BI_SETUP IT Performance Reporting Activation
    Error :
    20140620 050208[ERROR ]: Activation of InfoCube 0CCMDAY1 failed
    20140620 050208[HELP ]: Attempt to activate object CUBE:0CCMDAY1 manually in transaction RSOR. If this is successful, execute setup again.
    20140620 050208[ERROR ]: Activation of InfoCube 0CCMDAY2 failed
    20140620 050208[HELP ]: Attempt to activate object CUBE:0CCMDAY2 manually in transaction RSOR. If this is successful, execute setup again.
    20140620 050208[ERROR ]: Activation of InfoCube 0CCMMIN1 failed
    20140620 050208[HELP ]: Attempt to activate object CUBE:0CCMMIN1 manually in transaction RSOR. If this is successful, execute setup again.
    20140620 050208[ERROR ]: Activation of InfoCube 0CCMMIN2 failed
    20140620 050208[HELP ]: Attempt to activate object CUBE:0CCMMIN2 manually in transaction RSOR. If this is successful, execute setup again.
    20140620 050208[ERROR ]: Activation of InfoCube 0CCMMNTH1 failed
    20140620 050208[HELP ]: Attempt to activate object CUBE:0CCMMNTH1 manually in transaction RSOR. If this is successful, execute setup again.
    20140620 050208[ERROR ]: Activation of InfoCube 0CCMMNTH2 failed
    20140620 050208[HELP ]: Attempt to activate object CUBE:0CCMMNTH2 manually in transaction RSOR. If this is successful, execute setup again.
    20140620 050208[ERROR ]: Activation of InfoCube 0CCMQTR1 failed
    20140620 050208[HELP ]: Attempt to activate object CUBE:0CCMQTR1 manually in transaction RSOR. If this is successful, execute setup again.
    20140620 050208[ERROR ]: Activation of InfoCube 0CCMQTR2 failed
    20140620 050208[HELP ]: Attempt to activate object CUBE:0CCMQTR2 manually in transaction RSOR. If this is successful, execute setup again.
    20140620 050208[ERROR ]: Activation of InfoCube 0CCMVRKF failed
    20140620 050208[HELP ]: Attempt to activate object CUBE:0CCMVRKF manually in transaction RSOR. If this is successful, execute setup again.
    20140620 050208[ERROR ]: Activation of InfoCube 0CCMWEEK1 failed
    20140620 050208[HELP ]: Attempt to activate object CUBE:0CCMWEEK1 manually in transaction RSOR. If this is successful, execute setup again.
    20140620 050208[ERROR ]: Activation of InfoCube 0CCMWEEK2 failed
    20140620 050208[HELP ]: Attempt to activate object CUBE:0CCMWEEK2 manually in transaction RSOR. If this is successful, execute setup again.
    20140620 050208[ERROR ]: Activation of InfoCube 0SMD_PE2H failed
    20140620 050208[HELP ]: Attempt to activate object CUBE:0SMD_PE2H manually in transaction RSOR. If this is successful, execute setup again.
    20140620 050208[ERROR ]: Activation of InfoSet 0CCMIAGGR failed
    20140620 050208[HELP ]: Attempt to activate object ISET:0CCMIAGGR manually in transaction RSOR. If this is successful, execute setup again.
    20140620 050208[ERROR ]: Activation of InfoSet 0CCMIAVDT failed
    20140620 050208[HELP ]: Attempt to activate object ISET:0CCMIAVDT manually in transaction RSOR. If this is successful, execute setup again.
    20140620 050208[ERROR ]: Activation of InfoSet 0CCMICURR failed
    20140620 050208[HELP ]: Attempt to activate object ISET:0CCMICURR manually in transaction RSOR. If this is successful, execute setup again.
    20140620 050208[ERROR ]: Activation of MultiCube 0CCMPDATA failed
    20140620 050208[HELP ]: Attempt to activate object MPRO:0CCMPDATA manually in transaction RSOR. If this is successful, execute setup again.
    20140620 050208[ERROR ]: Activation of MultiCube 0CCMSDSR failed
    20140620 050208[HELP ]: Attempt to activate object MPRO:0CCMSDSR manually in transaction RSOR. If this is successful, execute setup again.
    20140620 050208[ERROR ]: Activation of MultiCube 0CCMSMTPH failed
    20140620 050208[HELP ]: Attempt to activate object MPRO:0CCMSMTPH manually in transaction RSOR. If this is successful, execute setup again.
    20140620 050208[ERROR ]: Activation of MultiCube 0SMD_MPEH failed
    20140620 050208[HELP ]: Attempt to activate object MPRO:0SMD_MPEH manually in transaction RSOR. If this is successful, execute setup again.
    20140620 050208[ERROR ]: Activation of DSO 0CCMAGGR failed
    20140620 050208[HELP ]: Attempt to activate object ODSO:0CCMAGGR manually in transaction RSOR. If this is successful, execute setup again.
    20140620 050208[ERROR ]: Activation of DSO 0CCMAVDT failed
    20140620 050208[HELP ]: Attempt to activate object ODSO:0CCMAVDT manually in transaction RSOR. If this is successful, execute setup again.
    20140620 050208[ERROR ]: Activation of DSO 0CCMBUFF failed
    20140620 050208[HELP ]: Attempt to activate object ODSO:0CCMBUFF manually in transaction RSOR. If this is successful, execute setup again.
    20140620 050208[ERROR ]: Activation of DSO 0CCMCURR failed
    20140620 050208[HELP ]: Attempt to activate object ODSO:0CCMCURR manually in transaction RSOR. If this is successful, execute setup again.
    20140620 050208[ERROR ]: Activation of DSO 0CCMSDCFG failed
    20140620 050208[HELP ]: Attempt to activate object ODSO:0CCMSDCFG manually in transaction RSOR. If this is successful, execute setup again.
    20140620 050208[ERROR ]: Activation of DSO 0CCMSYINF failed
    20140620 050208[HELP ]: Attempt to activate object ODSO:0CCMSYINF manually in transaction RSOR. If this is successful, execute setup again.
    20140620 050208[ERROR ]: Activation of DSO 0CCMTHRS failed
    20140620 050208[HELP ]: Attempt to activate object ODSO:0CCMTHRS manually in transaction RSOR. If this is successful, execute setup again.
    20140620 050208[ERROR ]: Activation of DSO 0CCM_SCFG failed
    20140620 050208[HELP ]: Attempt to activate object ODSO:0CCM_SCFG manually in transaction RSOR. If this is successful, execute setup again."
    Rg,
    Karthik

  • BI 7.0 authorization issue

    Hi,
    I have problems to restrict access to reporting component type "variable" RSZCOMPTP (S_RS_COMP).
    Trace shows auth check on act 01 when creating a new variable (which is ok) but when trying to change or worst selecting an existing variable within the query designer, auth check shows act 06 only (delete).
    No way to forbid someone from changing, deleting variables when using variables in the query designer!
    Any idea when other usual activities 02, 03, 16... are not checked, showing 06 for any other action than create?
    We would like to forbid Business users from creating/editing/deleting variables, giving them display/execute (03, 16) access when creating queries.
    Thx a lot for sharing information
    Chris

    Can you check from the trace for which infocube the characteristics is checking for : ?
    After that, get the list of all infocubes (which your user is assigned access to)  that have PGMRU marked as authorization relevant (use table RSDCUBEIOBJ)  and ensure all analysis authorization built for those infocubes have PGMRU included in them with value * or :
    Then ask the users to check if the queries work now. Possibly some analysis authorization won't have PGMRU included even though it is auth relevant for a infocube within the analysis authorization and when the query hits upon that infocube it fails.
    SAP doesnt support BW 3.5 auth concept in BI 7. RSR Authorization objects might not be considered in authorization checks of BI 7 (unless tcode RSCUSTV23 is used to change the setting) and hence object PGMRU=: doesn't suffice the requirement.
    Thanks
    Sandipan
    Edited by: Sandipan Choudhury on Jan 6, 2011 9:05 PM

  • Deletion of Data Mart Request taking more time

    Hi all,
    One of the Data Mart process(ODS to Infocube) has failed.
    Im not able to delete the request in Infocube.
    When delete option executed, its taking more time while im monitoring that job in SM37 and its not getting completed.
    The details seen in the Job Log is as shown below,
    Job started                                                                  
    Step 001 started (program RSDELPART1, variant &0000000006553, user ID SSRIN90)
    Delete is running: Data target BUS_CONT, from 376,447 to 376,447             
    Please let me know your suggestions.
    Thanks,
    Sowrabh

    Hi,
    How many records are there in that request. Usually when you try to delete out a request it takes more time. Depending on the data volume in the request the deletion time will vary.
    Give it some more time and see if it finishes. To actually know if the job is doing anything, goto SM50/51 and look at whats happening.
    Cheers,
    Kedar

  • RCA CCMS BI SETUP

    Hi,
    We see that the below info cube are active (not greyed) in RSA1. Still the program CCMSBI_SETUP_E2E is giving below error:
    HELP:Attempt to activate object CUBE:0DB6_C01M manually in transaction RSOR.
    ERROR:Activation of InfoCube 0DB6_C02D failed
    HELP:Attempt to activate object CUBE:0DB6_C02D manually in transaction RSOR.
    ERROR:Activation of InfoCube 0DB6_C02H failed
    HELP:Attempt to activate object CUBE:0DB6_C02H manually in transaction RSOR.
    ERROR:Activation of InfoCube 0DB6_C02M failed
    HELP:Attempt to activate object CUBE:0DB6_C02M manually in transaction RSOR.
    ERROR:Activation of InfoCube 0DB6_C03D failed
    HELP:Attempt to activate object CUBE:0DB6_C03D manually in transaction RSOR.
    ERROR:Activation of InfoCube 0DB6_C03H failed
    HELP:Attempt to activate object CUBE:0DB6_C03H manually in transaction RSOR.
    ERROR:Activation of InfoCube 0DB6_C03M failed
    HELP:Attempt to activate object CUBE:0DB6_C03M manually in transaction RSOR.
    ERROR:Activation of InfoCube 0DB6_C04D failed
    HELP:Attempt to activate object CUBE:0DB6_C04D manually in transaction RSOR.
    ERROR:Activation of InfoCube 0DB6_C04H failed
    HELP:Attempt to activate object CUBE:0DB6_C04H manually in transaction RSOR.
    ERROR:Activation of InfoCube 0DB6_C04M failed
    HELP:Attempt to activate object CUBE:0DB6_C04M manually in transaction RSOR.
    ERROR:Activation of InfoCube 0DB6_C05D failed
    HELP:Attempt to activate object CUBE:0DB6_C05D manually in transaction RSOR.
    ERROR:Activation of InfoCube 0DB6_C05H failed
    HELP:Attempt to activate object CUBE:0DB6_C05H manually in transaction RSOR.
    ERROR:Activation of InfoCube 0DB6_C05M failed
    HELP:Attempt to activate object CUBE:0DB6_C05M manually in transaction RSOR.
    ERROR:Activation of InfoCube 0DB6_C06D failed
    HELP:Attempt to activate object CUBE:0DB6_C06D manually in transaction RSOR.
    Please let me know what shall i do. This job shoould be completely successfull.
    Thanks,
    Rohan

    Hi Rohan,
    we've exactly the same error :
    here's an extract from the log:
    Phase I: Aggregating Data
    Target Infocube: 0SMD_EA5D
    Source Infocube: 0SMD_EA5H
    Destination    : BI_CLNT100
    Aggregator     :
    E2E_HK_AGGREGATE
    HK: Calling SMD_HOUSEKEEPER at BI_CLNT100
    HK: Error detected by SMD_HK_AGGREGATE
    HK: Status :    99
    HK: Message:
    Create Data Error:The data object could not be created: The type /BI0/V0SMD_EA5D
    HK: No new Requests found.
    Target Infocube: 0DB6_C01D
    Source Infocube: 0DB6_C01H
    Destination    : BI_CLNT100
    Aggregator     :
    E2E_HK_AGGREGATE_MDX
    HK: Calling SMD_HOUSEKEEPER at BI_CLNT100
    HK: Cube aggregation: SMD_HK_AGGREGATE_MDX
    System Failure:
    CREATE DATA: The specified type /BI0/V0DB6_C01D2 is no valid data type.
    Target Infocube: 0DB6_C01M
    Source Infocube: 0DB6_C01D
    Destination    : BI_CLNT100
    Aggregator  
    do you have any hint or solution, anyone?
    greetings
    Andreas

  • Regarding fiscal yr format..

    Hi,
    I am loading data from datasource 0FI_AA_005 to InfoCube is failing.  The error
    message shows that the fiscal year 8005 is invalid.  The data in the
    datasource shows data for the fiscal year period in MMM.YYYY format
    005.2008), and the data in the PSA comes in as YYYYMMM, which may both
    be correct, but it appears that the transformation rule for the fiscal
    year is incorrect because it is deriving the fiscal year from the last 4
    digits from the data in the PSA (YMMM).
    So its populating the error Fiscal yr is not maintained.
    Plz help..

    Gunjan,
    I assume you have the Fiscal Variant value in your records too...
    Are there other values for Fiscal Period for which the conversion is done correctly?
    Try to transfer the global settings from the source system, including the Fiscal Year variants and load again.
    Hope it helps.
    Regards,
    Luis

  • Unable to Delete failed requests from Infocube

    Dear Experts,
    I tried to uploaded the data through flat file. Since it has gone to Idle state i Killed the process. Now i Need to delete the red request from Infocube but It is not allowing me to delete the failed request. If I do so, I am getting ABAP runtime error.
    Please Suggest me . Its bit Urgent
    Many Thanks,
    Suraj

    Hi Suraj,
    There is might be a deadlock detected in the system
    So go the reqeust
    click on the details tab
    Each Package which is yellow or red has to be updated manually (right click – Manual Update). This can take few minutes.
    Change request status to green
    Change to Status – doppleclick on total status
    Change from red to “Delete status;back to request status”
    Note:
    This case is only applicable, if the data are stored in PSA.

  • Data load failed at infocube level

    Dear Experts,
    I hve data loads from the ECC source system for datasource 2LIS_11_VAITM to 3 different datatargets in BI system. the data load is successful until PSA when comes to load to datatargets the load is successful to 2 datatargets and failed at one data target i.e. infocube. I got the following error message:
    Error 18 in the update
    Diagnosis
        The update delivered the error code 18 .
    Procedure
        You can find further information on this error in the error message of
        the update.
    Here I tried to activate update rules once again by excuting the  program and tried to reload using reconstruction fecility but I get the same error message.
    Kindly, please help me to analyze the issue.
    Thanks&Regards,
    Mannu

    Hi,
    Here I tried to trigger repeat delta in the impression that the error will not repeat but then I encountered the issues like
    1. the data load status in RSMO is red but where as in the data target the status is showing green
    2. when i try to analyze psa from rsmo Tcode PSA is giving me dump with the following.
    Following analysis is from  Tcode  ST22
    Runtime Errors         GETWA_NOT_ASSIGNED
    Short text
         Field symbol has not yet been assigned.
    What happened?
         Error in the ABAP Application Program
         The current ABAP program "SAPLSLVC" had to be terminated because it has
         come across a statement that unfortunately cannot be executed.
    What can you do?
         Note down which actions and inputs caused the error.
         To process the problem further, contact you SAP system
         administrator.
         Using Transaction ST22 for ABAP Dump Analysis, you can look
         at and manage termination messages, and you can also
         keep them for a long time.
    Error analysis
        You attempted to access an unassigned field symbol
        (data segment 32821).
        This error may occur if
        - You address a typed field symbol before it has been set with
          ASSIGN
        - You address a field symbol that pointed to the line of an
          internal table that was deleted
        - You address a field symbol that was previously reset using
          UNASSIGN or that pointed to a local field that no
          longer exists
        - You address a global function interface, although the
          respective function module is not active - that is, is
          not in the list of active calls. The list of active calls
          can be taken from this short dump.
    How to correct the error
        If the error occures in a non-modified SAP program, you may be able to
        find an interim solution in an SAP Note.
        If you have access to SAP Notes, carry out a search with the following
        keywords:
        "GETWA_NOT_ASSIGNED" " "
        "SAPLSLVC" or "LSLVCF36"
        "FILL_DATA_TABLE"
    Here I have activated the include LSLVCF36
    reactivated the transfer rules and update rules and retriggered the data load
    But still I am getting the same error...
    Could any one please help me to resolve this issue....
    Thanks a lot,
    Mannu
    Thanks & Regards,
    Mannu

  • DTP to 0RPM_C02 (Capacity Management) InfoCube is getting failed

    Hi,
    I have installed the BI Content InfoCube 0RPM_C02 and all its data flow objects. After all the objects are moved to our Production Server, I am getting an error while executing the DTP. But, I didn't get any error while doing the same in Development Server.
    I am not able to understand what could be the problem and I do not know how to debug the error. Can you please help me out.
    Below given are the details of this problem
    Data Flow : 0RPM_C02
    DTPs to load the data from the 3rd Data Source (0RPM_BUPA_AVL) is happening smoothly. But the other 2 are giving the error, which is shown below.
    Please help me in debugging this problem.
    Thanks & Regards,
    Ranjan Jinka
    +919008477785

    Hi all,
    I found the solution to this problem. Thanks to Edwin Harpino
    He has given the solution a long back. For anybody who wants to understand the solution, here is the link  Shortdump ASSIGN_TYPE_CONFLICT
    However, Thanks Phani for your time.
    Regards,
    Ranjan Jinka
    +919008477785

  • Unable to load the data from PSA to INFOCUBE

    Hi BI Experts, good afternoon.
        I am loading 3 years data( Full load ) from R/3 to Infocube.
       So loaded the data by monthwise. So i created 36 info packages.
      Everything is fine. But i got a error in Jan 2005 and Mar 2005. It is the same error in both months. That is Caller 01and caller 02 errors( Means invalid characteristics are there PSA data )
    So i deleted both PSA and Data target Requests and again i loaded the data only to PSA.
      Here i got data in PSA without fail.
      Then i tried to load the data from PSA to Infocube MANUALLY.
    But its not happening.
      One message came this
           SID 60,758 is smaller than the compress SID of cube ZIC_C03; no        request booking.
       Please give me the solution how to solve this problem.
      Thanks & Regards
         Anjali

    Hi Teja,
       Thanks for the good response.
      How can i check whether it is already compressed or not?
      Pls give me the reply.
      Thanks
              Anjali

Maybe you are looking for