Infocube data loads fail with UNCAUGHT_EXCEPTION dump after BI 7.01 upgrade

Hi folks,
We're in the middle of upgrading our BW landscape from 3.5 to to 7.01. The Support pack we have in the system is SAPKW70103.
Since the upgrade any of the data loads going to infocubes are failing with the following
ABAP dump UNCAUGHT_EXCEPTION     
CX_RSR_COB_PRO_NOT_FOUND.
Error analysis                                                                  
    An exception occurred which is explained in detail below.                   
    The exception, which is assigned to class 'CX_RSR_COB_PRO_NOT_FOUND', was not
     caught and                                                                 
    therefore caused a runtime error.                                           
    The reason for the exception is:                                            
    0REQUEST is not a valid characteristic for InfoProvider                     
Has anyone come accross this issue and if so any resolutions you adopted to fix this. Appreciate any help in this regard.
Thanks
Mujeeb

hi experts,
i have exactly the same problem.
But I can`t find a test for infoobjects in rsrv. How can I repair the infoobject 0REQUEST`?
Thx for all answers!
kind regards
Edited by: Marian Bielefeld on Jul 7, 2009 8:04 AM
Edited by: Marian Bielefeld on Jul 7, 2009 8:04 AM

Similar Messages

  • Data load failing with a short-dump

    Hello All,
    There is a data load failing with the following short-dump:
    Runtime Errors         UNCAUGHT_EXCEPTION
    Except.                    CX_FOEV_ERROR_IN_FUNCTION
    Full text:
    "UNCAUGHT_EXCEPTION" CX_FOEV_ERROR_IN_FUNCTIONC
    "CL_RSAR_FUNCTION==============CP" or "CL_RSAR_FUNCTION==============CM004"
    "DATE_WEEK"
    It seems as if it is failing in a function module - please advise.
    Regards,
    Keith Kibuuka

    Did you read OSS [Note 872193 - Error in the formula compiler|https://service.sap.com/sap/support/notes/872193] or OSS [Note 855424 - Runtime error UNCAUGHT_EXCEPTION during upload|https://service.sap.com/sap/support/notes/855424]
    Regards

  • Urgent: Data Loading error(Load failed with Short Dump) caller 70 missing

    Hi please go through the error occured.
    <b>"Request is still running.
    Diagnosis:
    No error could be found. The current process has probably not finished yet.
    System Response:
    The ALE Inbox of the SAP BW is identical to ALE Outbox of the source System and /or the maximum wait time for this request has not yet run out and/or the batch job in the cource system has not ended.
    current status
    in the source sytem."</b>
    Update mode: Full, processing Online.
    I think we processed the infopackage in the online. if we process it in the back ground then we won't face any problem. Singal turns to Red.
    Please guide us. we need to load it immidiately.
    Thanks in advance.
    Regards,
    Nagesh.
    Message was edited by: Nagesh Ganisetti
    Message was edited by: Nagesh Ganisetti

    Hi Friends,
       at last the load has Terminated with Short Dump. Can any one guide me how can i reslove this. we could see the data in PSA.
    i'm sending the part of the short dump.
    Too many parameters specified with PERFORM.                                                                               
    What happened?                                                                               
    In a subroutine call, there were more parameters than in the  routinedefinition.                                                                         
    Error in ABAP application program.                          
    The current ABAP program "GP3KGSUXARXPB2F9YCR4B3MFPT6 " had to be terminated because one of statements could not be executed.                    
    This is probably due to an error in the ABAP program.                       
    What can you do?                                                                               
    Print out the error message (using the "Print" function)                                    
    and make a note of the actions and input that caused the                                    
    error.                                                                               
    To resolve the problem, contact your SAP system administrator.                              
    You can use transaction ST22 (ABAP Dump Analysis) to view and administer                    
    termination messages, especially those beyond their normal deletion                        
    date.                           
    is especially useful if you want to keep a particular message.                              
    Error analysis                                                                               
    A PERFORM was used to call the routine "VALUE_TO_SID_CONVERT_DB" of the program             
    "GP3KGSUXARXPB2F9YCR4B3MFPT6 ".                                                            
    This routine contains exactly 7 formal parameters, but the current                       
    call contains 8 actual parameters.                                                          
    parameters.                                                     
    How to correct the error                                         
    Correct the PERFORM call. You can find out where the call occurs in the section "Active calls / events".
    You may able to find an interim solution to the problem                                     
    in the SAP note system. If you have access to the note system yourself,                     
    use the following search criteria:     
    Please guide me.
    Regards,
    Nagesh.
    Message was edited by: Nagesh Ganisetti

  • Flat file data load failed with the below error

    hi guys,
    when the scheduling load(info package) from the flat file ,got below error..
    Error 'The argument 'INR' cannot be interpreted as a number ' on assignment field /BI
    thanks

    Hi,
    It seems that the flat file and data source are not in sync.... check your flat file format and prepare it in sync with your data source.
    I guess you have an amount field followed by currency in your flat file, but in your data source currency field is not next to the amount KF or vice versa. It could also be that the KF you have defined is not of Amount type, and hence it doesn't expect the currency field.
    Hope this helps
    Godhuli

  • 703: Subdaemon connect to data store failed with error TT9999

    All,
    I'm getting the following error whilst trying to connect to a TimesTen DB:
    connect "DSN=my_cachedb";
    703: Subdaemon connect to data store failed with error TT9999
    In the tterrors.log:
    16:39:24.71 Warn: : 2568: 3596 ------------------: subdaemon process exited
    16:39:24.71 Warn: : 2568: 3596 exited while connected to data store '/u01/ttdata/datastores/my_cachedb' shm 33554529 count=1
    16:39:24.71 Warn: : 2568: daRecovery: subdaemon 3596, managing data store, failed: invalidate (failcode=202)
    16:39:24.71 Warn: : 2568: Invalidating the data store (failcode 202, recovery for 3596)
    16:39:24.72 Err : : 2568: TT14000: TimesTen daemon internal error: Could not send 'manage' request to subdaemon rc -2 err1 703 err2 9999
    16:39:24.72 Warn: : 2568: 3619 Subdaemon reports creation failure
    16:39:24.72 Err : : 2568: TT14000: TimesTen daemon internal error: Deleting 3619/0x1558650/'/u01/ttdata/datastores/my_cachedb' - from association table - not found
    16:39:24.72 Err : : 2568: TT14004: TimesTen daemon creation failed: Could not del from dbByPid internal table
    16:39:24.81 Warn: : 2568: child process 3596 terminated with signal 11
    16:39:25.09 Err : : 2568: TT14000: TimesTen daemon internal error: daRecovery for 3619: No such data store '/u01/ttdata/datastores/my_cachedb'
    I've checked and the datastore does exist and is owned by the timesten UNIX user.
    ttversion:
    TimesTen Release 11.2.2.2.0 (64 bit Linux/x86_64) (tt1122:53396) 2011-12-23T09:26:28Z
    Instance admin: timesten
    Instance home directory: /home/timesten/TimesTen/tt1122
    Group owner: timesten
    Daemon home directory: /home/timesten/TimesTen/tt1122/info
    PL/SQL enabled.
    Datastore definition from sys.odbc.ini:
    [my_cachedb]
    Driver=/home/timesten/TimesTen/tt1122/lib/libtten.so
    DataStore=/u01/ttdata/datastores/my_cachedb
    LogDir=/u01/ttdata/logs
    PermSize=40
    TempSize=32
    DatabaseCharacterSet=AL32UTF8
    OracleNetServiceName=testdb
    Kernel parameters from sysctl -a:
    kernel.shmmax = 68719476736
    kernel.shmall = 4294967296
    Memory / SWAP:
    MemTotal: 2050784 kB
    SWAP: /dev/mapper/VolGroup00-LogVol01 partition 4095992
    I'm new to TimesTen and I'm planning on evaluationg it to see if it could solve an issue we're having. Any suggestions would be much appreciated.
    Thanks,
    Ian.

    Hi Ian,
    Can you please answer the following / provide the following information:
    1. What are your kernel parameters relating to semaphores set to? Is anything else on the mahcine using significant numbers of semaphores?
    2. Please provide the output of the following shell commands:
    ls -ld /u01
    ls -ld /u01/ttdata
    ls -ld /u01/ttdata/datastores
    ls -ld /u01/ttdata/logs
    3. Please provide an excerpt of the detailed message log (ttmesg.log) between around 16:38 and 16:40 (i.e. from a little while before the problem until after the problem).
    Thanks,
    Chris

  • SAP job SAP_COLLECTOR_FOR_PERFMONITOR getting failed  with abap dump LOAD_PROGRAM_NOT_FOUND

    Dear Experts,
    Background job SAP_COLLECTOR_FOR_PERFMONITOR getting failed  with abap dump LOAD_PROGRAM_NOT_FOUND.
    As it is hourly scheduled job and it gets finished 22 times in a day but other 2 times fails with abap dump.
    Finished Job log
    Job started
    Step 001 started (program RSCOLL00, variant , user ID Bharath)
    Clean_Plan:Cleanup of DB13 Plannings
    Clean_Plan:started by RSDBPREV                       on server
    Clean_Plan:Cleaning up jobs of system DEV
    Clean_Plan:finished
    Job finished
    Failed Job Log
    Job started
    Step 001 started (program RSCOLL00, variant , user ID Bharath)
    Internal session terminated with a runtime error (see ST22).
    Kindly suggest on this..
    Thanks,
    Bharath.

    Dear Divyanshu,
    Our system in ERP 6.0 EHP5 with SP level 10. The ABAP Dump shows below error.
    |Short text                                                                                        |
    |    Program "RSORA811" not found.                                                                 |
    |What happened?                                                                                    |
    |    There are several possibilities:                                                              |
    |                                                                                                  |
    |    Error in the ABAP Application Program                                                         |
    |                                                                                                  |
    |    The current ABAP program "RSCOLL00" had to be terminated because it has                       |
    |    come across a statement that unfortunately cannot be executed.                                |
    |    or                                                                                            |
    |    Error in the SAP kernel.                                                                      |
    |                                                                                                  |
    |    The current ABAP "RSCOLL00" program had to be terminated because the                          |
    |    ABAP processor detected an internal system error.                                             |
    |What can you do?                                                                                  |
    |    Note down which actions and inputs caused the error.                                          |
    |                                                                                                  |
    |                                                                                                  |
    |    To process the problem further, contact you SAP system                                        |
    |    administrator.                                                                                |
    |                                                                                                  |
    |    Using Transaction ST22 for ABAP Dump Analysis, you can look                                   |
    |    at and manage termination messages, and you can also                                          |
    |    keep them for a long time.                                                                    |
    |Error analysis                                                                                    |
    |    On account of a branch in the program                                                         |
    |    (CALL FUNCTION/DIALOG, external PERFORM, SUBMIT)                                              |
    |    or a transaction call, another ABAP/4 program                                                 |
    |    is to be loaded, namely "RSORA811".                                                           |
    |                                                                                                  |
    |    However, program "RSORA811" does not exist in the library.                                    |
    |                                                                                                  |
    |    Possible reasons:                                                                             |
    |    a) Wrong program name specified in an external PERFORM or                                     |
    |       SUBMIT or, when defining a new transaction, a new                                          |
    |       dialog module or a new function module.                                                    |
    |    b) Transport error                                                                            |
    |Information on where terminated                                                                   |
    |    Termination occurred in the ABAP program "RSCOLL00" - in                                      |
    |     "LOOP_AT_SYSTEMS_AND_REPORTS".                                                               |
    |    The main program was "RSCOLL00 ".                                                             |
    |                                                                                                  |
    |    In the source code you have the termination point in line 535                                 |
    |    of the (Include) program "RSCOLL00".                                                          |
    |    The program "RSCOLL00" was started as a background job.                                       |
    |    Job Name....... "SAP_COLLECTOR_FOR_PERFMONITOR"                                               |
    |    Job Initiator.. " bharath"                                                                       |
    |    Job Number..... 18243400
    Kindly check and suggest..
    Thanks,
    Bharath.

  • Content Browser (0BCT_CB_1) load fails with conversation id not found error

    Hi,
    I am suddenly experiencing a problem with loading data to the content browser cube using infosource 0BCT_CB_1. The load fails with an error saying: "Conversation 76635612 not found / CPIC-CALL: 'ThSA". Does anybody know how to solve this?

    Hi,
    Were you able to get this fixed?
    I am getting same issue while loading to BI 7.0  technical content.
    Thanks
    SA

  • Incremental load fails with the error LM_44127 Failed to prepare the task

    Guys,
    I have created a custom mapping and cretaed a execution plan for this mapping in the DAC. The full load completes successfully. But when ever the incremental lod is run , i am getting the below error and the task fails(The SDE load completes sucessfully , but the SIL load fails with the below error).
    LM_44127     Failed to prepare the task
    Please help!!!

    i googled it..
    http://datawarehouse.ittoolbox.com/groups/technical-functional/informatica-l/lm_44127-failed-to-prepare-task-when-running-workflow-in-informatica-86-on-aix-3199309
    you can try for better links now.. !!

  • Data load failed while loading data from one DSO to another DSO..

    Hi,
    On SID generation data load failed while loading data  from Source DSO to Target DSO.
    Following are the error which is occuuring--
    Value "External Ref # 2421-0625511EXP  " (HEX 450078007400650072006E0061006C0020005200650066
    Error when assigning SID: Action VAL_SID_CONVERT, InfoObject 0BBP
    So, i'm  not getting  WHY in one DSO i.e Source  it got successful but in another DSO i.e. Target its got failed??
    While analyzing all i check that SIDs Generation upon Activation is ckecked in source DSO but not in Target DSO..so it is reason its got failed??
    Please explain..
    Thanks,
    Sneha

    Hi,
    I hope your data flow has been designed in such a way where the 1st DSO as a staging Device and all transformation rules and routine are maintained in between 1st to 2nd dso and sid generation upon activation maintained in 2nd DSO.  By doing so you will be getting your data 1st DSO same as your source system data since you are not doing any transformation rules and routine etc.. which helps to avoid data load failure.  
    Please analyze the following
    Have you loaded masterdata before transaction data ... if no please do it first
    go to the property of first dso and check whether there maintained sid generation up on activation (it may not be maintained I guess)
    Goto the property of 2nd Dso and check whether there maintained sid generation up on activation (It may be maintained I hope)
    this may be the reason.
    Also check whether there is any special char involvement in your transaction data (even lower case letter)
    Regards
    BVR

  • Error! No data source found with name 'mynewdsname' (after asking 0 providers)

    Hi all,
    I am trying out the instructions given below.
    http://dev.day.com/docs/en/cq/current/developing/jdbc.html
    I followed them exactly but removed <cq:include script="head.jsp"/> line from the jsp since I do not have a head.jsp.
    my config node settings are as follows.
    But when I go to the page, I get below error message.
    error! No data source found with name 'mynewdsname' (after asking 0 providers)
    DB is up and running. I could not find any issue with it. Code is as follows.
    <%DataSourcePool dspService = sling.getService(DataSourcePool.class);
      try {
         DataSource ds = (DataSource) dspService.getDataSource("mynewdsname");  
    %>
    Any help will be great. TX

    Document is outdated & for now could you please follow http://dev.day.com/content/kb/home/cq5/Development/HowToConfigureSlingDatasource.html

  • Alert Message When Data Load Fails

    Hi Friends,
    I have three process chains(p1,p2,p3)and all for transactional data loading(psa-ods-cube).suppose whenever data load fails,it sends message to my company mail id. is there any functionality to do like this.
    i am not much aware of RSPCM(Process Chain Monitor).if anyone knows. tell me how much does it support my requirement?
    thank in advance
    sam

    hi Sam,
    welcome to sdn ...
    you can add 'create message' by right click the process type, this will lead you to mail sending setting.
    see thread
    Getting Failed process chain info through email
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/b0afcd90-0201-0010-b297-9184845346ca
    you may need to setup sapconnect for email, take a look
    http://help.sap.com/saphelp_webas620/helpdata/en/2b/d925bf4b8a11d1894c0000e8323c4f/frameset.htm
    http://help.sap.com/saphelp_webas620/helpdata/en/af/73563c1e734f0fe10000000a114084/content.htm
    hope this helps.

  • Attribute change run process type failed with short dump

    Hi all,
    In the process chain Attribute change run process type failed with short dump. I checked the locks in SM12 but there are no locks associated. I checked in the attribute change run screen through RSA1 -> infoobject list but there are no infoobjects there. I think the ACR was completed successfully, still the process type in the PC was in red colour. What to do and let me know what happened here.
    Thanks,
    Jack

    1. This kind of scenario is extremely rare but it happens sometimes. It might be the case that 2 attribute change runs are running at the same time.
    2. Same IO is being used in Differnet PC and getting activated.
    I think if this frequently occurs you need to check at the time of locking all running jobs and see whether anywhere else or simultaneously 2 ACR are running.
    Please do close the thread if that answers your questions. Please help us keep the forums clean and open useful information only.
    For more information search on help.sap.com and you will get lots of material.
    Regards.
    Den

  • SQL data Load rule with Substitution variable

    Hi,
    I have a data load rule with MySQL as a data source. I have requirement where user does not want to see Current day data in cube and they keep changing days not to be loaded.
    I have setup the substitution variable SUBv as '2009-11-04' and have scripts to update it daily.
    Data Load rule in where condition contains
    brand = 'HP' and region = 'east' and date <> &SUBv
    Now, above where condition does not work for date <> &SUBv but if I set substitution variable SUBv as "brand = 'HP' and region = 'east' and date <> '2009-11-04' " and set load rule where condition with just &SUBv it would just work fine. I dont know whats wrong in 1st place.
    I dont want to create multiple where condition in substitution variable (Don't we have limit on them?). I have 40+ load rules which might use this SUBv substitution variable if I find a way to define it so that it work as "brand = 'HP' and region = 'east' and date <> &SUBv"
    Thanks,
    Vikram

    I did some research and came to know when using substitution variable in Load rule need to keep substitution variable first in string..
    It worked out magically.

  • Data load failed at infocube level

    Dear Experts,
    I hve data loads from the ECC source system for datasource 2LIS_11_VAITM to 3 different datatargets in BI system. the data load is successful until PSA when comes to load to datatargets the load is successful to 2 datatargets and failed at one data target i.e. infocube. I got the following error message:
    Error 18 in the update
    Diagnosis
        The update delivered the error code 18 .
    Procedure
        You can find further information on this error in the error message of
        the update.
    Here I tried to activate update rules once again by excuting the  program and tried to reload using reconstruction fecility but I get the same error message.
    Kindly, please help me to analyze the issue.
    Thanks&Regards,
    Mannu

    Hi,
    Here I tried to trigger repeat delta in the impression that the error will not repeat but then I encountered the issues like
    1. the data load status in RSMO is red but where as in the data target the status is showing green
    2. when i try to analyze psa from rsmo Tcode PSA is giving me dump with the following.
    Following analysis is from  Tcode  ST22
    Runtime Errors         GETWA_NOT_ASSIGNED
    Short text
         Field symbol has not yet been assigned.
    What happened?
         Error in the ABAP Application Program
         The current ABAP program "SAPLSLVC" had to be terminated because it has
         come across a statement that unfortunately cannot be executed.
    What can you do?
         Note down which actions and inputs caused the error.
         To process the problem further, contact you SAP system
         administrator.
         Using Transaction ST22 for ABAP Dump Analysis, you can look
         at and manage termination messages, and you can also
         keep them for a long time.
    Error analysis
        You attempted to access an unassigned field symbol
        (data segment 32821).
        This error may occur if
        - You address a typed field symbol before it has been set with
          ASSIGN
        - You address a field symbol that pointed to the line of an
          internal table that was deleted
        - You address a field symbol that was previously reset using
          UNASSIGN or that pointed to a local field that no
          longer exists
        - You address a global function interface, although the
          respective function module is not active - that is, is
          not in the list of active calls. The list of active calls
          can be taken from this short dump.
    How to correct the error
        If the error occures in a non-modified SAP program, you may be able to
        find an interim solution in an SAP Note.
        If you have access to SAP Notes, carry out a search with the following
        keywords:
        "GETWA_NOT_ASSIGNED" " "
        "SAPLSLVC" or "LSLVCF36"
        "FILL_DATA_TABLE"
    Here I have activated the include LSLVCF36
    reactivated the transfer rules and update rules and retriggered the data load
    But still I am getting the same error...
    Could any one please help me to resolve this issue....
    Thanks a lot,
    Mannu
    Thanks & Regards,
    Mannu

  • Azure Backup fails with error 0x003E6 after data transmission (Protection Agent Failure)

    On a Windows Essentials 2012 Server (German) I had Azure Backup up and running for several months.
    (Probably) After adding features to support Remote Access, Azure Backup stopped working.
    The backup schedule executes and transfers all data, than it constantly fails with the error:
    "Fehler beim Vorgang aufgrund eines Schutz-Agent-Fehlers. Wiederholen Sie den Vorgang (0x003E6)" which translates to the english "The operation failed because of a protection agent failure. Retry the operation (0x003E6)".
    An update of the Backup Agent to the latest version did not resolve the issue.
    Does anybody know details about this error and the reason behind it?
    Regards,
    Dominik

    Hi Dominik,
    First please check if there is any new policy was set such as a throttle for uploading data, or a firewall was enabled before the issue occurs. 
    There is no enough information for finding out the exact cause. Please also check if there is any error and event logs. These can be found in the Application Event log under WindowsAzureBackup.
    Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Maybe you are looking for