Infocube monthly report

Hi Friends,
We have a scenorio of creating a weekly and monthly trend reports which are open for that week and month.
Flow of data loading is from ODS to Infocube( Trend) ,
Every time when we laods data to ODS current week will be getupdated from system date and also current month get updated and from when loading this ods to cube it loads only Current week.
Problem we are facing are,
If its open on last week and also open in current week ,and when we report on monthly snap shot we get two records.
How to over come this in infocube.
Regards,
Bala.

You may have to create a user exit variable to get last week of the month and restrict the data on cal week with that variable .
so that when you report on single month it will get only last week data . Hope got it ..
Ravi

Similar Messages

Monthly report listing out ALL open PO

Hi,
As our management requested, we need a monthly report listing out ALL open PO for CDG, APR Someone tell me to input cost centre but it is time consuming to input it as we have over 100 cost centers. Do you know if I can input SPG/profit center or other data to run this report instead ? Please advise the transaction code and how to perform it, such as need to know the profit center #, organization code etc
Thanks
Raja

hi
go to ME2N
then select Scope of list ALV
Selection parameters as WE101 Open goods receipt (select as per ur need )
then execute u will get the list for open po
now if u want it to specify the profit center then go to ME2N and select dynamic selecion (shift +F4)
now u will get a smaal scrren , in purchaseing doc item selct profit center
now u can see the profit center selection field ,give a proper profit center and follow the process as given above
hope it help
regards
kunal

Monthly Report Book Error

I've tried running the monthly report book and I get the following error:-
the error is hyperion workspace error: 5200:error executing query:the member ZZ611000 doesn't exist in this application.
please anyone help me out. your help is most appreciated.
Thanks in Advance
Regards,
Anil

You will need to open the report in Financial Reporting Studio to edit and find the member ZZ611000, it has either been removed or renamed.
Once you replace this member you can then save and then run the report.
cheers
Iain

Unable to View By Infocubes at Report Level

Hi experts,
could you please any one sort out this problem.
IN SAP BI - BUSINESS CONTENT Unable to View By Infocubes at Report Level"
Regards,
Subhash.

Hi,
Select the cube and in Grouping choose "In dataflow afterwards" you will get all the queries related to the Infocube.
Regards
Md Zubair Sha

INTRASTAT monthly report. Report movements not just invoices!

Hi gurus,
I have a problems regarding to purchase orders by launching the INTRASTAT monthly report. Program: RVEXDAIE.
I´ve orders that does not appear in the request list from Intrastat. Theese orders have not received the invoice or it is pending posting. I need them to appear.
The obligation to report the movement, born at the time that exist the movement of goods (according to Resolution 2320 of January 27, 2009) and not at the time of receipt and / or posting of the invoice.

Hi Paul,
AFAIK, Solution Manager is becoming more and more important, including new features.
If you have a java based solution, I think it is required to have Solution Manager Diagnostics.
To get certain services it is also "required" (but SAP some times do not push it so much).
It is quite a while i do no look into it so my info could be a bit obsolete. For example, with your maintenace fee you can get one or two Early Watch services, but you can order them ONLY if you have the EWA alert working and shows some "red" issues.
You can find two examples of EWA here:
http://servce.sap.com/EWA -> Media Library
1) Sample Report with Explanations - New July 2005
2) Sample_Report_EWA_for_Java_Systems_v1_0
The first one is a bit old and the second quite recent (this year)
Edited by: Fidel Vales on Mar 13, 2008 8:10 PM

SAP Note 1614681 - ESI monthly report for filing details of ESIable employe

Any one implemented this SAP Note
While doing the manual steps mentioned in SAP Note 1614681 - ESI monthly report for filing details of ESIable employees .
we found some difficulties.
Please let me know the steps that you followed while implementing this.
Note Summary
Symptom
As per the new rule introduced by ESIC authorities, an organization is liable to file details of employees eligible for ESI contribution during a particular period/month. Details are to be uploaded on the ESIC website in the format prescribed by the ESIC authorities. Currently, as a part of SAP standard delivery, ESI Form5 and Form6 are provided which are used to report ESI contribution for a period of six months. However, there is no such provision to generate monthly ESI details in system and report it to the ESIC authorities.
Other terms
HINCESI0, PC00_M40_ESIF, ESI , Employee State Insurance, ESI Monthly report, IT0588, ESIC.
Reason and Prerequisites
Legal Change.

Hi,
We tried to apply the manual steps mentioned along with the note. We were able to do first two steps that is inserting the messages in message class and creating new text elements..
When we tried for the 3rd step, we are facing the problem..
When we gave the name ''HR_IN_ESI_MON_DET '' in SE18 and and try to create it asked for the package...since it is SAP standard we gave PC40( since all ESI badi is saved in this package i gave this) for the package name.....and it got created and each time it was asking for Access key...( After providing access key in each step it got created)
Now when i check in SE80 this enhancement is there....but if i check in SE18 it says Enhancement spot doesn't exist.
check the screen shot:
http://www.mypicx.com/10052011/ESI_manual_Steps/

Monthly report

In my application i m generating Breakdown analysis report for each batch. It is a pure text report (No graph) where i just have to mention
1. Break down code
2. Cause
3. Time.
Just these three things i want to appent for each batch report.
Now, i want to generate a monthly report where i can find out in a months how many times a break down occured and by which reason.
The all 3 (Break down code, Cause, Time) are ready with me. I m generating batchwise report also. (Batch report will be named with Day/Date/Time format).
I just want to make a single report for a month.
Plz give me the solution.
Kaustubh
VC (Pune)
INDIA

Duplicate post. Please don't ask the same question in multiple postings.

Monthly reports TMG

I'm having trouble with monthly report on my tmg array. Site and user activity reports show only one week information. I choose last 30 days in reports details but start date of this report is One week ago, End Date is now.

Hi,
Thank you for the update.
Firstly, please install the latest rollup 1 for TMG SP2 and check if you have selected “Enable Daily and Monthly Summaries”.
Regards,
Nick Gu - MSFT

Monthly Reports Sending Mass Emails

Current Environment:
Zen 11.2.2 no MUs
Test Patch Applied:
database time sync patch where time showed it was off by 6 hours
Problem:
On January 31 and Feb 28 (End of the month days) it seems all my monthly reports are spamming the recipients. This started January 31 at 6pm CST and went on till 12pm CST. On February 28 at 6pm CST it starting spamming the reports again until I removed them from the report. We had upgraded to Zenwork 11.2.2 in January 2013 and this only started after the update.
Does anyone see this problem in their environment or is there a log I can see the email actions?
Thanks
Nhat

nhatdoan,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://www.novell.com/support and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Forums Team
http://forums.novell.com

Monthly Reports Schedule

Hi All,
I have few monthly reports which I want to schedule on month end so I have created three subscriptions, 28th of February, 30th of April, June, Sep, Nov and 31st on remaining of the months.
Yesterday, on 28th May it executed all the reports from 28th Feb subscription, to me it looks like it considered 28th May as 28th Feb due to some unknown reasons.
If any body can help me in resolving this will be a great help.
Thanks.
Arvinder

Hello,
When we create a subscription on Report Manager, there is an associated job in SQL Server Agent with specified schedule. Is it possible that others modify the schedule of the subscription in the SQL Server Agent?
You can try to check the job schedule in the SQL Server Agent. You can also use the following query to get the detail information of the schedule of each subscription you created on the Report manager:
select c.Name as [report name],
s.ScheduleID as [schedule],
sp.SubscriptionID as [subscription],
[Schedule frequency]= case s.RecurrenceType
WHEN 1 THEN 'Once'
WHEN 2 THEN 'Hourly'
WHEN 4 THEN 'Daily/Weekly'
WHEN 5 THEN 'Monthly'
END ,
s.StartDate,
s.NextRunTime,
s.LastRunTime,
s.EndDate,
s.MinutesInterval,
s.DaysInterval,
s.WeeksInterval,
s.DaysOfWeek,
s.DaysOfMonth,
s.[Month],
s.MonthlyWeek
from dbo.catalog c
inner join dbo.ReportSchedule rs on rs.ReportID = c.ItemID
inner join dbo.Schedule s on rs.ScheduleID = s.ScheduleID
inner join dbo.Subscriptions sp on rs.SubscriptionID=sp.SubscriptionID
order by c.name
Regards,
Fanny Liu
Fanny Liu
TechNet Community Support

Differentiate weekly and monthly report

Hi Guys...Here is my problem...
I created a crystal report with start date and end date parameters. I need to schedule this report to run automatically every month and also make it adhoc.
I am using Business objects to schedule this report.
The monthly report is scheduled to run on 5 th of next month. so the report run on Mar 5 should return feb data.
For the adhoc report if the users doesnt enter any dates then i have to return current month data.
So I want to know if there is a way to pass a hidden parameter from crystal ( so that the users dont see the prompt), based on the hidden parameter i can calculate the dates in the stored proc???
If flag=0 then get previous month data
else flag = 1 then get current month data.
For someone familiar with DTS packages this is similar to defining global variables in the dts packages and pass them to stored proc...on the same lines i am wondering if there is solution in crystal...
Thanks...

Geoff...I use Business objects to generate the report and its in .pdf format. when i look at the url for any reports generated the url is:
http://servername/businessobjects/enterprise200/InfoView/main.aspx
If the url is same for all the reports then how can i distinguish between the reports...
Thanks

Unable to download monthly report sales and trends

Dear all,
we are not able to download the
"Sales and trends" > Summary sales report > monthly report of last month (February 2014)
despite the passage of more than 5 days after the month's end date.
The button for the download is still gray instead of blue.

iTune Connect > Sales and Trends had some problems after an update....have you contacted support to advise them of this problem?

Weekly and and monthly report

how do I create a weekly report and a monthly report
This topic first appeared in the Spiceworks Community

Geoff...I use Business objects to generate the report and its in .pdf format. when i look at the url for any reports generated the url is:
http://servername/businessobjects/enterprise200/InfoView/main.aspx
If the url is same for all the reports then how can i distinguish between the reports...
Thanks

VCloud VM Monthly report vCpu|RAM|Storage

Hello ,
I am looking for script which will provide Monthly report of vCpu/ RAM & Storage utilization by each Individual vCloud Director Virtual Machine
If the vCloud Director script is not available vCenter server script will also work for me
Thanks in Advance

Thread moved to vCloud Director PowerCLI

[SOLVED]Monthly Report Generation Logic

Hello,
I am trying to run a monthly report for the tickets in our ticketing system with a MySQL query. Basically, every ticket has a creation date. Once it is closed, it is assigned a closed date. Easy enough.
Let's say the current month is September and I want to run a report on tickets that were open at any point in July:
| MAY | JUNE | JULY | AUG | SEP | OCT |
All I should have to to is look for tickets that were opened or closed in July. But what about a ticket that was opened in June(or any other previous month) and wasn't closed until August? This should be easier than I am making it out to be. Thanks in advance for any help.
*Edited to specify MySQL*
Last edited by nadman10 (2014-09-25 14:19:13)

How is this data stored? If it is in, or can be converted to 'unix time' then this would be trivial:
if (ticket_open < report_time && (!ticket_close || ticket_close > report_time))
include_ticket

Infocube monthly report

Similar Messages

Maybe you are looking for