InfoCube not in the system standard InfoArea

Hello:
    I face the problem as follow:
    I activited the system standard InfoCube,ODS, InfoObject, but I find them no in the sysytem standard InfoArea. Now they stand in the unassigned InfoArea.  How can I change the unususlly thing? Hope anyone can give me some advice.
Regards&Thanks!
zagory

Hi,
If you want to list the cube under your company created or any other infoarea, select the cube/ ODS and drang it into the necessary info area.
If it prompts for Tranport request, create one.
hope this helps.
Praveen.

Similar Messages

  • Elite plus account online says my phone number is not in the system...

    Hello,
    I have been a member for many years, and have pretty much always used the same phone number when accessing the myrewardzone.com and at the store to apply the purchase.  However recently, when accessing the mybestbuy website, there is a notice to enter my phone number for verification to check points.  When doing so, it says that number is not in the system.  I just went a best buy store yesterday and purchased a TV using that number and it went through fine.  
    Is there anyone who can help with this?
    Thank you!
    -John

    Good morning jedimario,
    I hope you are having a good start to your weekend.
    I am the who, and from what I can see, you have quite a bit of unnecessary information on file (phone #s, mailing addresses, and email addresses).  I would strongly suggest that we update your information and get it down to three primary pieces.  Please send me a private message with the below information, by clicking on the blue button in my signature, and I will make sure everything is up-to-date.
    As far as your points, you should receive a 25% bonus for having Elite Plus status.  I looked over your points history and show that you have in-fact been receiving the bonus points.  You may not see those bonus points pending for recent purchases because it is fairly common for bonus points not to appear as pending, but they should post to your account within 20 days of the original purchase date.
    Name
    Phone #
    Mailing address
    Email address
    Thank you for reaching out to us on the forum!
    Derek|Social Media Specialist | Best Buy® Corporate
     Private Message

  • My IPhone is set up with an internet  downloaded firmware of ios7 because my phone would not restore, the system has failed and I had to do a manual erase fro  within the phone. My computer will not accept the phone because they say it's a "Developer?"

    My IPhone is set up with an internet  downloaded firmware of ios7 because my phone would not restore, the system has failed and I had to do a manual erase fro  within the phone. My computer will not accept the phone because they say it's a "Developer?" Help. I cannot not even get passed the activation step on the computer or phone because it will not activate the device.

    Hello buddyacw
    You would have to restore the iPhone. Download the latest version of iTunes and then follow the steps in the article below to get it working again.
    iOS: Unable to update or restore
    http://support.apple.com/kb/HT1808
    Thanks for using Apple Support Communities.
    Regards,
    -Norm G.

  • SelectTransport: creating directory failed: Win32Exception: root of directory to create not found: The system cannot find the path specified. [0x00000003]

    USMT is failing with error 71 for all users in a specific office when backing up to a specific share:
    COMPUTERNAME\Guest, administrator: No, interactive: Yes, logged on: No, has profile: No
    DOMAIN\USERNAME, administrator: Yes, interactive: Yes, logged on: Yes, has profile: Yes
    COMPUTERNAME\Administrator, administrator: Yes, interactive: Yes, logged on: No, has profile: Yes
    2014-10-31 12:52:37, Status [0x000000] Activity: 'MIGACTIVITY_TRANSPORT_SELECTION'
    2014-10-31 12:52:37, Info [0x000000] Processing the settings store
    2014-10-31 12:52:37, Error [0x000000] SelectTransport: creating directory \\san.f.q.d.n\share$\username\BACKUP\USERNAME\USMT failed: Win32Exception: root of directory to create not found: The system cannot find the path specified. [0x00000003] class UnBCL::DirectoryInfo *__cdecl UnBCL::Directory::CreateDir(const class UnBCL::String *)[gle=0x00000005]
    2014-10-31 12:52:37, Info [0x000000] Failed.[gle=0x00000091]
    2014-10-31 12:52:37, Info [0x000000] A Windows Win32 API error occurred
    Windows error 3 description: The system cannot find the path specified.[gle=0x00000091]
    2014-10-31 12:52:37, Info [0x000000] Windows Error 3 description: The system cannot find the path specified.
    2014-10-31 12:52:37, Info [0x000000] USMT Completed at 2014/10/31:12:52:37.861[gle=0x00000091]
    2014-10-31 12:52:37, Info [0x000000] Entering MigShutdown method
    2014-10-31 12:52:37, Info [0x080000] COutOfProcPluginFactory::FreeSurrogateHost: Shutdown in progress.
    2014-10-31 12:52:37, Info [0x0803e5] Not unmapping HKLM\ELAM; it is not mapped
    2014-10-31 12:52:37, Info [0x0803e6] Removing mapping for HKLM
    2014-10-31 12:52:37, Info [0x0803e7] Successfully unmapped HKLM
    2014-10-31 12:52:37, Info [0x0803e6] Removing mapping for HKU
    2014-10-31 12:52:37, Info [0x0803e7] Successfully unmapped HKU
    2014-10-31 12:52:37, Info [0x080487] Destroying OS analysis service
    2014-10-31 12:52:37, Info [0x080488] Destroyed OS analysis service
    2014-10-31 12:52:37, Info [0x000000] Leaving MigShutdown method
    2014-10-31 12:52:37, Info [0x000000] ----------------------------------- USMT ERROR SUMMARY -----------------------------------
    2014-10-31 12:52:37, Info [0x000000] * USMT error code 71:
    2014-10-31 12:52:37, Info [0x000000] +-----------------------------------------------------------------------------------------
    2014-10-31 12:52:37, Info [0x000000] | A Windows Win32 API error occurred
    2014-10-31 12:52:37, Info [0x000000] | Windows error 3 description: The system cannot find the path specified.
    2014-10-31 12:52:37, Info [0x000000] +-----------------------------------------------------------------------------------------
    As the user in question, when I browse \\san.f.q.d.n\share$\username, the BACKUP directory exists, but there are no sub directories.
    I manually created the sub directories, USERNAME\USMT - so the full path now exists: \\san.f.q.d.n\share$\username\BACKUP\USERNAME\USMT
    I re-ran USMT but the process returned the same error.
    If I specify other shares not on san.f.q.d.n but on san1.f.q.d.n or server.f.q.d.n or even workstation.f.q.d.n, it works fine.
    Can someone provide guidance on how to troubleshoot this further?

    In Windows, setting the Environmental Variable sometimes DOES NOT WORK.
    The -Djava.io.tmpdir=C:\temp setting must be made in the server properties of the oc4j in order for it to work.
    Jae

  • Does not meet the system requirement for installing BB App World

    I bought a Curve 8520 in Singapore yesterday. When i tried to download App world into this phone, it says "my phone does not meet the system requirement for the software".  does it refer to hardware specification or the BB O/s version on the phone. How can fix it because being able to use App world is one of the purposes that i buy a BB.
    Also, How about MS Live Messenger , facebook ?  Do I need to install them seperately through App World?
    Please help!

    Hi there!
    Please see these links for reference:
    http://na.blackberry.com/eng/services/appworld/download.jsp#tab_tab_system_requirements
    http://www.blackberry.com/app_includes/devicesoftware/appworld/appworld_availability_en.html
    A key component in accessing AppWorld is your carrier -- if they are not delivering it, then you can't get it. If you don't have an adequate plan from them that incudes it, then you can't get it. Hence, if you meet the hardware requirements AND it is available in your country, then you need to contact your carrier to find out how you can get it via their network.
    All that said, AppWorld is merely a storefront, vending apps developed by others...there are many other storefronts available that don't have the same restrictions.
    Good luck!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • App World - Sorry, your device does not meet the system requiremen​ts that are needed

    Hi, I’ve just got a blackberry which is my first. I am new to this. I'm trying to download the App World on my phone because I would like to get some applications on my phone. As I try to download the App World it says "Sorry, your device does not meet the system requirements that are needed to support Blackberry App World." I have tried to download this on my computer Via Cable and on my Blackberry Via the Browser. If this doesn’t work for my blackberry is there any way around this so I can download applications from somewhere else. 
    Network Provider: 02
    Network Plan: Pay As You Go
    Thanks.

    Hi, thanks. Is this something my provider can activate free of charge or does this come at a monthly payment?
    Can someone provide a bit of information about this please.
    Thanks.

  • I receive the error "axError.gifSorry, your device does not meet the system requirements that are needed to support BlackBerry App World

    Hi My name is Tibor Madarasi i purchased a Blackberry 8900 brand new i can't install app world i instaled the updates for this phone (v4.2.0.85)still can install app world i receive the error "axError.gif Sorry, your device does not meet the system requirements that are needed to support BlackBerry App World." I'm using O2 network in London UK Please advice me Regards
    Message Edited by MichelleK on 06-15-2009 09:53 AM

    ffbizz wrote:
    I hate this bold 9700 series 2 no carrier and find it to be a pathetic product backed up by even more pathetic support so I have decided to use it as a torch. There is an app for this but it requires app world first. Are you trying to say that I MUST have a carrier and they will resolve this issue but otherwise RIM cannot do anything about their own product?
    Hello and Welcome to the Forums!
    We are so sorry that you are having so many difficulties. While many experience the same (a search here will reveal that fact), there are also many who have very positive experiences with their BB. Not every device is suitable for everyone -- which IMHO is why there are so many choices.
    In addition, but for AppWorld, front line support for BB's is, by contract, not provided by RIM. The carriers and authorized resellers are responsible for front line formal support to end users. It is possible to bypass your carrier and seek assistance direct from RIM, but such involves fees since you are bypassing your support agreement with your carrier. The "Support and Services" tab toward the top of these forum pages provide information about that. But, if you do go through your carrier for support, they can escalate into RIM at no fee to you if they so choose to.
    As to AppWorld Support (beyond what we volunteer to provide in these forums), that is available via this portal:
    https://www.blackberry.com/CSOHelp/index.do?ft=generic
    If you choose to submit to them in this manner, then please use, in the "Please select a component:" field, the AppWorld Billing/Payment selection. Any other selection will simply route you back anonymously to these public forums.
    As to your question, RIM and the carriers both participate in AppWorld. My suspicion is that the carriers get a portion of the costs for the apps that are vended via AppWorld -- but that's just my suspicion. Hence, the use of AppWorld indeed requires a carrier (and, indeed, the proper data plan level from them).
    But, AppWorld is merely a portal, vending apps that are (for the most part) developed by others. As such, it is not the only portal in the world for BB apps. There are a few, I think, apps that are exclusively vended via AppWorld...but I think that number is rather small. Consequently, if you desire an app that will allow your BB to function as you desire, you should seek out alternative vending portals. There are plenty.
    Good luck!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Error "Sorry your device does not meet the system requirements that are needed to support Twitter for BlackBerry Smartphones"

    I have a Curve 8300.  With OS v4.5.0.81.  And I am on a BB Social network plan through my cell providor "Fido".
    I mainly use it for Facebook & Twitter  and have no problems using either app.  However I was prompted for an update for my twitter recently but wasn't near a wifi spot to update.  Just decided to update today at home where I do have wifi.  However when I go to do the update, it gives me the following error:
    "Sorry your device does not meet the system requirements that are needed to support Twitter for BlackBerry Smartphones"
    I have scoured for answers but haven't had much luck.  I tried checking for OS updates.  I apparently have the most current one that my phone will support.  I uninstalled twitter and then tried to reinstall it via the twitter Icon on my phone.  Got the same error.  Tried reinstalling it through app world, it installed just fine.  However it installed the version that I had previously had.  So I went to twitter's settings and checked for updates.  It prompted for one as I expected it would.  And when I tried to get the update.  It gave me that error again.  I can use twitter as it is, but I don't see why my phone shouldn't be able to get all the updates for various apps.  Is it a software compatability issue?  Is it a hardware compatability issue?  Is there anything I can do to get the update or do I just have a phone that won't take some app updates?

    Hi and welcome to the forums!
    The 8300 is not listed in the device upgrade table for Blackberry device OS v5.0. The newer versions of apps like Twitter and Facebook require device OS v5.0 to run correctly. Might be time to consider a new device!
    Thanks,
    Bifocals
    BlackBerry Device Software 5.0 main support page
    Click Accept as Solution for posts that have solved your issue(s)!
    Be sure to click Like! for those who have helped you.
    Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

  • DI: Stock Transfer error (Unique field value does not match the system ...)

    Hi
    I made an add-on that makes stock transfers via DI API. The add-on has been running for two months with more than 10,000 stock transfers with almost no problems.
    The company that is using the add-on have all their products managed by serial/batch numbers.
    But just with one transfer Im getting the error in the stock transfer Add() method:
    "Unique field value does not match the system serial number [(----)29-52]"
    And I tried to debug it without success, I checked that the system serial numbers exists in the origin warehouse and are available. And I really can't find where is the problem.
    If somebody knows what this error means, please let me know.
    Thanks in advance,
    Regards,
    Allan

    Hi János, thanks for your answer.
    I found what was the problem, it was not exactly what you told me, but you gave me some insights to found the problem.
    The thing is that Im using UDT's to store the information of stock transfers (before creating a real SAP stock transfer), because of the funcionality of the add-on. After some user have done some steps or validations, the add-on actually does the real SAP stock transfer.
    The problem here was that my tables had some InternalSerial for some Item, for example the serial A-234, and before the real SAP stock transfer was made, they changed the serial from A-234 to A234 (in the serial number management). So the add-on was trying to create the transfer with the serial A-234, but the serial A-234 no longer exists.
    I have to create a validation that if they change the serial number for an item, I have to change it in my UDT's.
    On the other hand, Im not sure, but I think that I read before that you made a Warehouse Management add-on. This add-on that Im working now is a kind of warehouse management.
    Im having a lot of headaches because the poor accessibility to the user fields in the OSRI and OIBT tables. Im sure that you have faced problems with this. If you have any tips or advices about this it would be greatly appreciated.
    Thanks again,
    Regards
    Allan

  • I had a problem in the Hard Laptop MacBook Pro you replace hard I could not install the system

    I Abdul Razak from Syria.
    Since a short period of OS X system stops working and request a new download system when what do I install the system and I can not show me a message that the disk is locked. I asked one of my friends about the problem and Nsahana that I replace the hard and you do, but I could not install the system or OS X on the new hard?
    I wish to help and quickly Thank you.

    Zap the PRAM and Reset the SMC, then try again.

  • "Could not load the system tables" when installing the MAXDB DB instance

    Hello,
    We have an error when we are installing the MAXDB 7.5 for Netweaver 04's Unicode Kernel.
    The central instance is installed, but when we launch the DB Server, in the step 14/25 Activating the DB, the follow error ocurrs.
    "ERROR 2007-03-12 11:44:21
    MDB-07048  Could not load the system tables. Check the files 'dbm.prt' and 'dbm.ins' in the run directory of the database (search fo
    r "load_systab") or call the Support Center."
    the file dbm.ins is not found, but the file dbm.prt have:
    2007-03-12 11:44:14 0x00000a94              0 DBM      command load_systab
    2007-03-12 11:44:14 0x00000a94 ERR     -24964 DBM      ERR_EXECUTE: error in program execution
                        0x00000a94 ERR     -24964 DBM      256,/sapdb/XIP/db/bin/x_python /sapdb/XIP/db/env/lsystab.py -R /sapdb/XIP/db
    -d XIP -u SUPERDBA,*.
    I search information in OSS, but we can't found solutions.
    Best Regards, Alberto.

    Hello Alberto,
    if you're an SAP customer, can you open a message about this error, and enter a service connection into the MAXDB server?
    Thanks,
    Ashwath

  • I can not change the system sounds on my ipod example incomming mail is stuck on bell even though i have selected glass

    I can not change the system sounds i have tried every thing but a reset,any suggestions

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up           
    - Restore to factory settings/new iOS device.
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar          

  • I would like to run the most secure version of firefox on my computer, but my computer does not meet the system requirements for the latest version

    i would like to run the most secure version of firefox on my computer, but my computer does not meet the system requirements for the latest version. is there a way i can have the security of firefox 8 and still be able to run it on my old computer. i currently an running firefox 3.6. it is a bit slow, but it is functional.

    Currently Firefox 3.6.24 is as secure as Firefox 8.0.1 is. Firefox 3.6.x will continue to get security updates until next spring, although the exact date hasn't yet been determined.
    Which of the system requirements are you lacking? <br />
    Processor wise you're stuck with what you got, but RAM can be upgraded. WinXP is still supported in all versions of Firefox and will be continued to be supported until Windows drops support for WinXP sometime in 2014.

  • HT201364 I just received my new macbook pro with 16gb, 2.3 GHZ & for some reason I get a message stating that I do not have the system requirements. Help?

    I just received my new macbook pro with 16gb, 2.3 GHZ & for some reason I get a message stating that I do not have the system requirements. Help?

    What are you trying to do?  If you have a brand new machine, you don't need to download and install Mavericks.  You already have it.

  • Is this PKGBUILD ok? (does not meet file system standards...)

    Hello,
    I am currently writing on a chess program (https://launchpad.net/klaus) of which I released the first alpha some weeks ago. It's written in Java (yes, I read the packaging guidelines about Java programs).
    Now I am trying to get a working PKGBUILD for this program. My current version (see below) is working, but instead of using the file system standards, it puts everything in /opt/klaus. I know this is not correct (and will try to get it working properly in the next alpha), but fixing it in the PKGBUILD seems to be very much trouble for me.
    So is this PKGBUILD version o. k. until I fixed the file structure and should I upload it to AUR, or will this be rejected?
    # Contributor: Stephan Hillebrand <stefh123 at yahoo dot de>
    pkgname=klaus
    pkgver=0.1
    pkgrel=1
    pkgdesc="A platform independent chess program"
    arch=('i686' 'x86_64')
    url="http://launchpad.net/klaus"
    license=('GPL')
    groups=("games")
    depends=("jre>=6u1")
    makedepends=("jdk>=6u1")
    optdepends=()
    provides=()
    conflicts=()
    replaces=()
    backup=()
    options=()
    install=
    source=(http://launchpad.net/klaus/trunk/0.1/+download/$pkgname-$pkgver-source.tar.gz)
    noextract=()
    md5sums=('5c47f31c0a61de4f213258932120ae16')
    build() {
    cd $srcdir/$pkgname-$pkgver
    make || return 1
    mkdir -p ${pkgdir}/opt/klaus
    cp -r bin lib share ${pkgdir}/opt/klaus
    # echo "#!/bin/bash\n/opt/klaus/bin/klaus" > /usr/bin/klaus
    mkdir -p ${pkgdir}/usr/bin
    cat > ${pkgdir}/usr/bin/klaus <<DELIM
    #!/bin/bash
    /opt/klaus/bin/klaus
    DELIM
    chmod a+x ${pkgdir}/usr/bin/klaus

    This works for me:
    PKGBUILD
    # Contributor: Stephan Hillebrand <stefh123 at yahoo dot de>
    pkgname=klaus
    pkgver=0.1
    pkgrel=1
    pkgdesc="A platform independent chess program"
    arch=('i686' 'x86_64')
    url="http://launchpad.net/klaus"
    license=('GPL')
    groups=("games")
    depends=('bash' 'java-runtime>=6u1')
    makedepends=("java-environment>=6u1")
    source=(http://launchpad.net/klaus/trunk/0.1/+download/$pkgname-$pkgver-source.tar.gz klaus.sh)
    md5sums=('5c47f31c0a61de4f213258932120ae16' '0205506613a36c1fc8ad3e87f3f9bd44')
    build() {
    cd $srcdir
    make || return 1
    package() {
    cd $srcdir
    install -d ${pkgdir}/usr/share/klaus
    cp -r bin lib share ${pkgdir}/usr/share/klaus
    install -Dm755 $srcdir/klaus.sh ${pkgdir}/usr/bin/klaus
    together with klaus.sh
    #!/bin/bash
    pushd /usr/share/klaus/bin
    ./klaus
    popd
    BTW, your program semms to have problems with german Umlauten and the ß. Is it unicode aware?

Maybe you are looking for