Infocubes and infoareas

Dear Experts,
Can anyone tell me which table gives information about infocubes and infoareas. ie.. which infocubes belong to which infoarea?
Regards,
Kris
Please search the forum before posting a thread
Edited by: Pravender on Sep 27, 2011 10:58 PM

Hi,
RSAREACUBE will help you.
For more help on tables, check the below link, it will help you -
[InfoCube to InfoArea;
Hope this helps.
Regards,
RahulM

Similar Messages

Fields in infocube and DSO?

Hi Experts,
                 I need some information regarding maximum number of fields in infocube and DSO?
     According to my knowledge, in Infocube - characteristics --248
                                                                         Keyfigures--233
                                                In DSO - key fields - 16
                                                              Data fields -749
             I thought dat DSO has 3 tables. maximum number of columns in a table is 255. So 255 * 3( 3tables in DSO) is 755.
                                             755(total fields)-16(key fields)= 749(data fields).
Is it correct?can anyone clarify my doubt pls?
Thanks in Advance
Jani Sk.

Hi,
       In cube , table consists of 255 columns, in which 6 are internally used by SAP,16 for dimensions and the remaining 233 are for Key figures. Each dimension key connected to 248 master data tables at max through dimension and SID tables.So, We can analyse the data at 16*248 dimensions.
ODS/DSO is a two dimensional flat structure.It consists of total 1024 columns, out of which 16 are used for Key fields and remaining 1000 are for data fields.
Thanks,
Sandeep

How to get the size of all InfoCubes and DSO's?

Hi all,
My client wants a complete list of all InfoCubes and DSO's in terms of size (no records but KB). This list of the Cubes / DSO's gives us a picture of the used storage per Area and can be charged. Iu2019ve seen some threats and looked into the possibilities of ST14 and DB02. ST14 provides the ideal list but with a restriction for the top 30 InfoCubes and the top 30 DSO's. Does anyone know how to get such a list for all InfoCubes and DSO's?
Thnx in advance,
Henk.

Hello Henk,
while I am searching for some performance problems in our BI, I tried to look through the new DB02 of BI 7.0. And there is a function which helps a lot creating lists of Cube, DSOs and so on:
Start DB02
On the left side find SPACE -> Additional Functions -> BW Analysis
A Doubleclick will give you a broad survey of the current memory disposition regarding BI/BW objects.
In the BW Area "Cubes & related objects" you can find Infocube E- and F-Facttable. Depending on the Compressed state of your cubes you will find more data in E or F. Just doubleclick on one of these Entries. In my environment currently F-Tables are more effective.
You will then get a list of all Infocubes with size.
You will have to this for E and F Tables and some up over the Infocubes. But, because this will show only the Cubes and not the partitions of the cube it will be much easier to handle than DB02OLD.
Perhaps this helps, because you did not mention your BW/BI release.
Kind regards,
Jürgen

Infocubes and info objects

Hi guys,
i'm new to BI. can any one differentiate between Infocubes and info objects..
please be a bit specific.....

Hi,
An InfoCube describes (from an analysis point of view) a self-contained dataset, for example, for a business-orientated area. You analyze this dataset in a BEx query.
An InfoCube is a set of relational tables arranged according to the star schema: A large fact table in the middle surrounded by several dimension tables.
Use
InfoCubes are filled with data from one or more InfoSources or other InfoProviders. They are available as InfoProviders for analysis and reporting purposes.
Structure
The data is stored physically in an InfoCube. It consists of a number of InfoObjects that are filled with data from staging. It has the structure of a star schema.
The real-time characteristic can be assigned to an InfoCube. Real-time InfoCubes are used differently to standard InfoCubes.
ODS versus Info-cubes in a typical project scenario
ODS
why we use ods?
why is psa & ods nessasary
InfoObject: Basic building block of BW.. ( Its like a field )
Definition
Business evaluation objects are known in BI as InfoObjects. They are divide into characteristics (for example, customers), key figures (for example, revenue), units (for example, currency, amount unit), time characteristics (for example, fiscal year) and technical characteristics (for example, request number).
Use
InfoObjects are the smallest units of BI. Using InfoObjects, information is mapped in a structured form. This is required for constructing InfoProviders.
InfoObjects with attributes or texts can themselves also be InfoProviders (if in a query).
Regards,
Ram.

Develop report based on INFOCUBE and ODS

Hi,
Pls, can anybody help regarding developing reports based on INFOCUBE
and ODS object
i am using SAP BW 7.0
what is the transaction code for reports
what are the steps to develop reports
Thanks\
- Mubeen.

There is no transaction code as such as you have to use the front-end application to create queries off your Cubes/ ODS.
open Bex query designer -> select info provider (cube or ods) -> drag and drop the keyfigures in columns, -> char in rows -> save.
Also look at
http://help.sap.com/saphelp_nw04/helpdata/en/e3/e60138fede083de10000009b38f8cf/frameset.htm

The table for storing data for infocube and ODS

Hi all:
could you please tell me how to find the table for storing data for infocube and ODS?
thank you very much!

Hi Jingying Sony,
To find tables for any infoprvider go to SE11.
In database table field enter the following
Cube -
Has fact table and dimension table
For customized cube - ie cube names not starting with ' 0 '
Uncompressed Fact table - /BIC/F<infocubename>
Compressed fact table - /BIC/E<infocubename>
Dimension table - /BIC/D<infocubename>
For standard cube - ie cube names starting with ' 0 '
Uncompressed Fact table - /BI0/F<infocubename>
Compressed fact table - /BI0/E<infocubename>
Dimension table - /BI0/D<infocubename>
Click on display.
For DSO,
For standard DSO active table- /BI0/A<DSO name>00.
You use 40 for new table.
Click on display.
For customized DSO use- /BIC/A<DSO name>00.
An easier way is in the database table field, write the name of the cube/DSO preceeded and followed by ' * ' sign. Then press F4 . It shall give you the names of the available table for that info provider.
Double click on the name and choose display.
Hope this helps,
Best regards,
Sunmit.

Infocubes and Infosources for Budgeting in BPS

Hi,
Please provide me information about which Infocubes and Infosurces are used for Budgeting in BPS. Please send me the any detail documention on Budgeting flow in BPS. It would be great help for me.
Will assign the points.
thanks
sg

Funds management:
If the requirement is to budget expenses, then rea you can look at the cube 0CCA_C11.
For funds management specifc cubes look at 0FIFM_C01
Either way, you need to refine the cube to suit your requirements.
Underneath the cube, you need to create planing objects.; in BPS or in IP.
Ravi Thothadri

How to design infocube and ods

Hi all,
How to design infocube and ods. What are the steps involved in this process. please send me to : [email protected]
thanx in advance
bhasakr

Hi Bhaskar ,
I found the following links which is very good as it shows how to create infocube step by step from basic with snapshots.
http://www.bridgeport.edu/sed/projects/cs597/Fall_2003/vijaykse/step_by_step.htm
Also check the foll.
http://www.awprofessional.com/articles/article.asp?p=28666&seqNum=3&rl=1
http://help.sap.com/saphelp_nw04/helpdata/en/80/1a643fe07211d2acb80000e829fbfe/content.htm
http://www.crestech.org/Crestech/CourseCatalog/Acrobat/Sap/sap_bw_80hrs.pdf.
for creating ods objects
http://help.sap.com/saphelp_nw04/helpdata/en/4a/e71f39488fee0ce10000000a114084/content.htm
http://www.nesug.org/html/Proceedings/nesug04/pr/pr02.pdf.
http://64.233.167.104/search?q=cache:cg6dvsTAmxUJ:www.vdestiny.com/CourseOutlines/PDF/The%2520Output%2520Delivery%2520System%2520in%2520SAS%2520Software%2520-%2520Basics.pdfcreatingods&hl=en&gl=in&ct=clnk&cd=10
Please reward for the same.

What is the difference between infocube and fact table?

hi bw gurus,
what is the difference between infocube and fact table?
thanks in advance
bye

Fact table contains only KeyFigures and foreign keys of dim ids.
Infocube conatin fact table sorrounded by dimension tables.dimension table contain primary keys of dim ids and SIDs which link to master data.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/6ce7b0a4-0b01-0010-52ac-a6e813c35a84

What is the difference in createdelete indexes for infocube and DTP ?

Hi experts,
Can anyone tell me what is the difference in create\delete index process for infocube and create\delete index for DTP or Infopackage? If i add into a chain an Infopackage then DTP then Delete request processes, system generates for all of them delete\create index processes by default. Is that nesesary leave them all or is that enough to leave only the ones for infocube?
Thank you,
Tigr_Z

Hi Tigr,
This delete/create index step is to make the load faster. This can be done on a infocube. Before loading data to infocube it is suggested by SAP to delete index and after loading again create the index.
If you want to execute these steps through process chain, there are process types for delete/create index. It is related to infocube not to any DTP/Infopackage. Before loading to the cube add one DROPINDEX step (deleting) in the chain. After completion of loading add one INDEXING step (creating) in the chain.
Thanks,
Indrashis

How to delete an request on infocube and on aggregates?

hi all,
how to delte an request after it is rolled up in aggregate.
I want to delete an request infocube and it should be reflected in aggregates.
Can anyone explain me a scenario how to delete request in cube that shd be reflected in aggregates.
regds
hari

Hi hari,
When you delete the request the system automatically adjusts the aggregates. It is only when you load that you need to "roll-up" the aggregates after the load.
Bye
Dinesh

About infocubes and infoobjects....

Hi,
Currently I am working on SAP AFS module.
I came across various terminologies in AFS module like infocubes and infobjects.
1) Are infocubes same as tables in DDIC ?
2) Do I use the regular select queries to extract data from infobjects, the same way I do on tables ?
3) What transaction do I need to see details of data in infocubes/ infoobjects ?
Any insights will be grealy appreciated...

hi,
Infocubes are based on extended star schema model.it is the data storage area where u can create queries for reporting.

Infocube and ODS populated with DATA (need to add one more field?)

Hi,
If infocube and ODS have been populated with data for past 3 months. Then we need to add one more field to this cube. What is the impact? Please advise.
The following is my understanding. Please correct me if I am wrong.
1) Need to delete content of ODS and infocube.
2) insert the new field at ODS and infocube.
3) reload the data into ODS and infocube.
Is there a way that the current data need not be deleted.
Just add in this new field and only subsequent month, infocube will have this new field? Please advise what is the best approach without affecting existing data.

Hi,
Siggi is right. You dont need to delete the previously loaded data to CUBE or ODS. The only catch is that, your new field will be empty as far as history is concerned. But so long as you did map it to the datasource and the datasource is able to fill it up, then your new field will now have value for incoming DELTA Updates.
Addition of a field is not that complicated compared to deletion of a field from CUBE or ODS.
--Jkyle

Budget snapshot from 0CCA_C11 Infocube and 0CO_OM_CCA_1 DS

Hi,
We are using Infocube 0CCA_C11 with DS 0CO_OM_CCA_1. We use 0VTYPE (Value type) to differentiate between Planned and Actual costs.
What we want is to have a snapshot of that information. For example if the budget in the R/3 source system is changed (KP06), the users want to be able to see what the budget used to be before and after the change. Any ideas of how to implement such a solution?
thanks

Oscar,
That's been very helpful. I've removed the deletion flag in the infopackage but that's doing something I don't want. Obviously, if there are 100 records in the cube and I re-run the infopackage, it adds 100 more records and distorts the data.
So I've decided to create a copy of the Infocube, create a delta transformation between the two, limit 0VTYPE to 20 (planned) in the DTP and load data into the latter Infocube. Now I have my planned data in the second Infocube and they're distinguished by the request ID as you suggested.
However, the users would have to limit their query based on something that makes sense to them. Unlike the request ID, the loading date would be ideal, but I can't find it in the cube. How can I include it? What Infoobject should I be looking for?
Also, is the process I just described an efficient way of fulfilling the requirements?
thanks
Michalis

Load data to a modified InfoCube and ODS used in Production

Hi,
I have added few fields (InfoObjects) to the cube(s) and DSOs in BI 7.0. These Cubes and DSOs are BW 3.5 Objects and are in-use in Production.
My question: After I transport this new/enhanced InfoCube and DSO from Dev/Qua to Production, how to retrieve the old data from original Cube/DSO and populate data to new fields at DSO and Cube level.
Please advise.
Thanks,
~S

Hi Siddhartha Nayak
As ur enhanced the IC & ODS which r 3.x objects, i guess u havn't used the remodeling tool. Then u have to follow the old procedure to enhancing the cube.
Create a copy cube , Delete the contents of existing cube, enhance it & load the data to existing cube back from copy cube.
Same thing u have to follow in ur case also.
Regards,
Shaiksha.

Infocubes and infoareas

Similar Messages

Maybe you are looking for