Infocubes and Infosources for Budgeting in BPS

Hi,
Please provide me information about which Infocubes and Infosurces are used for Budgeting in BPS. Please send me the any detail documention on Budgeting flow in BPS. It would be great help for me.
Will assign the points.
thanks
sg

Funds management:
If the requirement is to budget expenses, then rea you can look at the cube 0CCA_C11.
For funds management specifc cubes look at 0FIFM_C01
Either way, you need to refine the cube to suit your requirements.
Underneath the cube, you need to create planing objects.; in BPS or in IP.
Ravi Thothadri

Similar Messages

Budget snapshot from 0CCA_C11 Infocube and 0CO_OM_CCA_1 DS

Hi,
We are using Infocube 0CCA_C11 with DS 0CO_OM_CCA_1. We use 0VTYPE (Value type) to differentiate between Planned and Actual costs.
What we want is to have a snapshot of that information. For example if the budget in the R/3 source system is changed (KP06), the users want to be able to see what the budget used to be before and after the change. Any ideas of how to implement such a solution?
thanks

Oscar,
That's been very helpful. I've removed the deletion flag in the infopackage but that's doing something I don't want. Obviously, if there are 100 records in the cube and I re-run the infopackage, it adds 100 more records and distorts the data.
So I've decided to create a copy of the Infocube, create a delta transformation between the two, limit 0VTYPE to 20 (planned) in the DTP and load data into the latter Infocube. Now I have my planned data in the second Infocube and they're distinguished by the request ID as you suggested.
However, the users would have to limit their query based on something that makes sense to them. Unlike the request ID, the loading date would be ideal, but I can't find it in the cube. How can I include it? What Infoobject should I be looking for?
Also, is the process I just described an efficient way of fulfilling the requirements?
thanks
Michalis

The table for storing data for infocube and ODS

Hi all:
could you please tell me how to find the table for storing data for infocube and ODS?
thank you very much!

Hi Jingying Sony,
To find tables for any infoprvider go to SE11.
In database table field enter the following
Cube -
Has fact table and dimension table
For customized cube - ie cube names not starting with ' 0 '
Uncompressed Fact table - /BIC/F<infocubename>
Compressed fact table - /BIC/E<infocubename>
Dimension table - /BIC/D<infocubename>
For standard cube - ie cube names starting with ' 0 '
Uncompressed Fact table - /BI0/F<infocubename>
Compressed fact table - /BI0/E<infocubename>
Dimension table - /BI0/D<infocubename>
Click on display.
For DSO,
For standard DSO active table- /BI0/A<DSO name>00.
You use 40 for new table.
Click on display.
For customized DSO use- /BIC/A<DSO name>00.
An easier way is in the database table field, write the name of the cube/DSO preceeded and followed by ' * ' sign. Then press F4 . It shall give you the names of the available table for that info provider.
Double click on the name and choose display.
Hope this helps,
Best regards,
Sunmit.

Tables for Budget allocated and spent for a WBS element

Dear experts,
I am new to PS domain, kindly tell me the table names where I can find the Budget allocated to a WBS element and Open budget for a WBS element.
Thanks & Regards,
Murthy.

Hi,
I think by conversion cost you mean Production cost of the turbine.
Since you do both the actvities Material procurement and production under the same WBS. The budget cannot be tracked separelty.
Have 2 different WBS strucute one for procurement and one for production. However you can add the existing Nwk activities to these WBS.
Regards,
Ramesh-

What is the difference in createdelete indexes for infocube and DTP ?

Hi experts,
Can anyone tell me what is the difference in create\delete index process for infocube and create\delete index for DTP or Infopackage? If i add into a chain an Infopackage then DTP then Delete request processes, system generates for all of them delete\create index processes by default. Is that nesesary leave them all or is that enough to leave only the ones for infocube?
Thank you,
Tigr_Z

Hi Tigr,
This delete/create index step is to make the load faster. This can be done on a infocube. Before loading data to infocube it is suggested by SAP to delete index and after loading again create the index.
If you want to execute these steps through process chain, there are process types for delete/create index. It is related to infocube not to any DTP/Infopackage. Before loading to the cube add one DROPINDEX step (deleting) in the chain. After completion of loading add one INDEXING step (creating) in the chain.
Thanks,
Indrashis

TE40s for Loans and Public Sector Budgeting modules

Hi Experts,
Would be appreciated, if anyone share the TE040s for Loans and Public Sector Budgeting Modules..
Thanks and Regards,
Srini M

Hi Frank,
Thanks for your reply, could you please help me any test script or functional flow document for Public Sector budgeting.
Thanks
Rajesh

Business content empty in BW 7.3 for datasources and infosources

Hi,
We recently installed BW 7.3 system. I went to business content to install data source and it is empty.
I double clicked RSDS and TRCS select object and they did not get the list of datasources and infosources.
I checked the system status and this is the information
soft comp - SAP BW
Release - 730
Level - 000
highest support - empty
short description - SAP Buiness warehouse
thanks
Bhat

Hi,
We were missing BI CONTENT in the system. Basis installed BI content and it resolved the issue

Infocubes and info objects

Hi guys,
i'm new to BI. can any one differentiate between Infocubes and info objects..
please be a bit specific.....

Hi,
An InfoCube describes (from an analysis point of view) a self-contained dataset, for example, for a business-orientated area. You analyze this dataset in a BEx query.
An InfoCube is a set of relational tables arranged according to the star schema: A large fact table in the middle surrounded by several dimension tables.
Use
InfoCubes are filled with data from one or more InfoSources or other InfoProviders. They are available as InfoProviders for analysis and reporting purposes.
Structure
The data is stored physically in an InfoCube. It consists of a number of InfoObjects that are filled with data from staging. It has the structure of a star schema.
The real-time characteristic can be assigned to an InfoCube. Real-time InfoCubes are used differently to standard InfoCubes.
ODS versus Info-cubes in a typical project scenario
ODS
why we use ods?
why is psa & ods nessasary
InfoObject: Basic building block of BW.. ( Its like a field )
Definition
Business evaluation objects are known in BI as InfoObjects. They are divide into characteristics (for example, customers), key figures (for example, revenue), units (for example, currency, amount unit), time characteristics (for example, fiscal year) and technical characteristics (for example, request number).
Use
InfoObjects are the smallest units of BI. Using InfoObjects, information is mapped in a structured form. This is required for constructing InfoProviders.
InfoObjects with attributes or texts can themselves also be InfoProviders (if in a query).
Regards,
Ram.

Help required in Sales Budgeting in BPS

All,
I am in the process of modelling the Sales Budgeting in BPS.
Would appreciate inputs on modelling the following in BPS
<b>Scenario 1</b>
I have product volume budgets which are set at division level
for e.g for the division North and product 0001 the budget is 1000; This is set by the General Manager
The Divisional Manager is supposed allocate the budgets to four of his regions
1 Region A
2 Region B
3 Region C
4 Region D
The total budget allocation for all the Regions cannot exceed 1000;
<b>Scenario 2</b>
I want to pull data into a BPS layout, sales data of previous years based on a future dated customer hierarchy ..... Any thoughts on the same
Scenario 3
Certain budget figures need to be simulated and given to the user in the layout itself
1. CAGR for a period of time
2. % contribution of a product to the volume = product volume of a region/product volume of all regions * 100
This % is applied on the previous years budget figure to arrive at the new budget figure, this is a proposed figure by the system
3. User is allowed to input a growth %; the % is applied on the previous year's volume figures to arrive at the new budget figure
Would appreciate inputs on modelling of similar scenarios in BPS
Rgds,
Ramesh

hi
solution for your Scenario 1:
U Can have 2 planning levels:
1. In First Planning Level : u will hv charecteristics: Division, Product, Budget etc.
   and ur layout as follows:
Division   Product   Budget
North      0001        1000
2. In Ur Second Planning Level: u will hv characteristics: Division, Region, Product,
For Division u will give only one value in range i.e. NORTH
Budget and ur layout as follows
Division: North   =============== Header
Region      Product                 Budget
Region A    0001                     400
Region B    0001                     200
Layout Category(1):Key Figures in Data Columns
Header : Division
Lead Columns: 1.Region, 2.Product
Data Column : Budget
Next Select Hierarchy In First Screen At Top Right (beside description) u will hv hiearchy button . Select Hierarchy Button:
u will get pop window: In that Select BPS Hierarchy (which is default)
as per ur requirements select TOP DOWN Approach / Process
also there will be one check box CHECK ENTRY, u chk that chk box: so that u cannot enter more than allocated budget i.e. 1000 for all regions.
this solves ur scenario 1. For other scenarios i will send within due course of time.
if u feel any more clarifications, feel free to mail me.
tx
srin

Use external drive for both Time Machine and storage for Back to My Mac

Hi all,
I have been "a Mac" now for over a year and just keep finding cool new things that make me happy I switched. The latest thing is Back to My Mac offered with my Mobile Me account. With a rather convoluted mix of PC/Mac/iOS devices to manage - best $99 I ever spent btw...
I also have a 1TB Time Capsule that I have been using with Time Machine to back up all four of my Mac computers at home. Needless to say, the 1TB is really struggling to handle the amount of data being backed up and certainly leaves no room for anything else.
What I wanted to do was to attach a larger external hard drive via a powered hub to the USB port on the Time Capsule and use it for Time Machine backups while using the internal 1TB drive with Back to My Mac so that I can have remote access to all my data from anywhere without having to leave my computer running at home all the time in order for my laptop to "see" it when I'm away. And, yes, the amount of that data far exceeds what any level of Mobile Me subscription can offer! I should also mention that the hard drive is the only USB device connected through the hub to the Time Capsule at the moment. There are no other devices that might be "getting in the way".
I'm thinking maybe all this is asking too much without the addition of a dedicated file server (Mac Mini, perhaps - not a purchase my budget wants to make).
I understand that the Time Capsule doesn't support partitions, so I bought a Western Digital 2TB Elements drive, connected it to my Macbook Pro and used Disk Utility to reformat the drive from the incompatible NTFS it shipped in to a single, Mac OS Extended (Journaled) partition. I then made two folders on the drive, one for Time Machine backups and one for Back to My Mac remote storage/access. Great.
However, when I connected the 2TB drive to my Time Capsule I could not see it at all. Time Capsule was reporting problems in the way of a disk error. From within my Airport Utility, I could see the trouble was the external drive. The utility suggested connecting the drive to a Mac and using it's Disk Utility to troubleshoot.
I followed through, checking the disk, etc. and ended up reformatted the drive on my Macbook Pro yet again with the same specifications as before but without the folders and reconnected it to the Time Capsule. Same deal. But now, I can't even remotely connect to the Time Capsule at all. I can see the Time Capsule in the shared area of my Macbook's Finder but can not connect. The connection tries and fails even before it gets to asking me for username and password credentials.
Long story short, first of all, I suppose I would like to know if I'm asking for the impossible?
Second, if what I want to do *is* possible, what steps do I need to take to make it so?
Thanks in advance for any advice or suggestions you might have.

Well, I have now reformatted/partitioned my poor WD Elements 2TB drive about a dozen times as well as restarted my 1TB Time Capsule so many times it's no wonder it's as confused as I am! <G>
Last night, at your suggestion, William, and in respect for your continued support, I tried creating two 1TB Mac OS Extended (Journaled) partitions on the WD external USB drive, both with GUID partition tables. Both volumes mounted to my laptop's desktop flawlessly and without issue.
Once the external drive was connected to the Time Capsule, however, it was a crap shoot as to whether or not the drive was recognized at all, reporting a problem with the disk, or, even at one point, mounting one of the two volumes but not both. <sigh>
I read somewhere on the Internet that you need to restart the Time Capsule for volumes on an external USB drive to be recognized.
So I tried that. I connected the freshly partitioned/formatted disk to the Time Capsule and restarted it. This succeed in removing the issue of reporting a nameless drive with a capacity of 0MB. It then reported the drive with its correct name but would not recognize whatever volumes in whatever partitions that particular crack at it contained with the exception of the once, as I mentioned above, when only one of two volumes mounted correctly and was listed with the right name and capacity on the Time Capusule's Setup's Disk tab.
At this point I have given up on my goal to use the external drive with Time Machine to back up my Macs or to hope I will ever be able to see its contents remotely via Back to My Mac. All I would like to do now is simply find a reason why I can't get it successfully connected and playing nice with my Time Capsule in the first place!
Any further suggestions or advice as to what steps I might take next would be greatly appreciated.
Thank you all.

IPhone 4S Battery Life: Best solutions and procedures for 1st time user: 1-Do you have a battery life issue (learn first what the usage time spec is about) 2-What can you try to remedy the situation without reading 500 pages of posts

What follows is a grouping of some of the most fruitful procedures - from what I've seen in the biggest battery life issue thread - and some background information and discussion for solving or improving the battery life with the iPhone 4S and may be applicable also to devices on which iOS 5.0/5.0.1 has been applied. Credit goes to the respective users who contributed this information to the forum and they should be commended for doing so. This is not a final listing. The goal here is to provide a first stop sort of knowledge base document for newcomers instead of having them perusing the never ending threads where the wheel is reinvented on every page...
Please don't post your questions, usage screenshots, or claims that it worked or not for you or anything here except PROCEDURES/DEBUG STEPS/SOLUTIONS or improvements to the procedures already listed here. Try to use point form and to be as concise and clear as possible. Hope all this helps.
Thank you and good luck!
General info and specs
First, take a look Apple's battery tips, info and specs(obligatory reading for all Iphone 4S users - read it once and for all):
http://www.apple.com/batteries/iphone.html
http://www.apple.com/batteries/
... you didn't read it? loll Always remember this i.e. the definition of "usage":
Usage: Amount of time iPhone has been awake and in use since the last full charge. The phone is awake when you’re on a call, using email, listening to music, browsing the web, or sending and receiving text messages, or during certain background tasks such as auto-checking email.
I'm still not convinced you read the links so here's what Apple has to say in terms of fine tuning your battery life:
Optimize your settings
Depending on how they are configured, a few features may decrease your iPhone battery life. For example, the frequency with which you retrieve email and the number of email accounts you auto-check can both affect battery life. The tips below apply to an iPhone running iOS 5.0 or later and may help extend your battery life.
Minimize use of location services: Applications that actively use location services such as Maps may reduce battery life. To disable location services, go to Settings > General > Location Services or use location services only when needed.
Turn off push notifications: Some applications from the App Store use the Apple Push Notification service to alert you of new data. Applications that extensively rely on push notifications (such as instant messaging applications) may impact battery life. To disable push notifications, go to Settings > Notifications and set Notifications to Off. Note that this does not prevent new data from being received when the application is opened. Also, the Notifications setting will not be visible if you do not have any applications installed that support push notifications.
Fetch new data less frequently: Applications such as Mail can be set to fetch data wirelessly at specific intervals. The more frequently email or other data is fetched, the quicker your battery may drain. To fetch new data manually, from the Home screen choose Settings > Mail, Contacts, Calendars > Fetch New Data and tap Manually. To increase the fetch interval, go to Settings > Mail, Contacts, Calendars > Fetch New Data and tap Hourly. Note that this is a global setting and applies to all applications that do not support push services.
Turn off push mail: If you have a push mail account such as Yahoo! or Microsoft Exchange, turn off push when you don’t need it. Go to Settings > Mail, Contacts, Calendars > Fetch New Data and set Push to Off. Messages sent to your push email accounts will now be received on your phone based on the global Fetch setting rather than as they arrive.
Auto-check fewer email accounts: You can save power by checking fewer email accounts. This can be accomplished by turning off an email account or by deleting it. To turn off an account, go to Settings > Mail, Contacts, Calendars, choose an email account, and set Account to Off. To remove an account, go to Settings > Mail, Contacts, Calendars, choose an email account, and tap Delete Account.
Turn off Wi-Fi: If you rarely use Wi-Fi, you can turn it off to save power. Go to Settings > Wi-Fi and set Wi-Fi to Off. Note that if you frequently use your iPhone to browse the web, battery life may be improved by using Wi-Fi instead of cellular data networks.
Turn off Bluetooth: If you rarely use a Bluetooth headset or car kit, you can turn off Bluetooth to save power. Go to Settings > General > Bluetooth and set Bluetooth to Off.
Use Airplane Mode in low- or no-coverage areas: Because your iPhone always tries to maintain a connection with the cellular network, it may use more power in low- or no-coverage areas. Turning on Airplane Mode can increase battery life in these situations; however, you will be unable to make or receive calls. To turn on Airplane Mode, go to Settings and set Airplane Mode to On.
Adjust brightness: Dimming the screen is another way to extend battery life. Go to Settings > Brightness and drag the slider to the left to lower the default screen brightness. In addition, turning on Auto-Brightness allows the screen to adjust its brightness based on current lighting conditions. Go to Settings > Brightness and set Auto-Brightness to On.
Turn off EQ: Applying an equalizer setting to song playback on your iPhone can decrease battery life. To turn EQ off, go to Settings > iPod > EQ and tap Off. Note that if you’ve added EQ to songs directly in iTunes, you’ll need to set EQ on iPhone to Flat in order to have the same effect as Off because iPhone keeps your iTunes settings intact. Go to Settings > iPod > EQ and tap Flat.
Usage specs for the 4S - http://www.apple.com/iphone/specs.html:
Talk time: Up to 8 hours (12.5% per hour drain) on 3G, up to 14 hours (7.1% per hour drain) on 2G (GSM)
Standby time: Up to 200 hours (0.5% per hour drain)
Internet use: Up to 6 hours on 3G (16.6% per hour drain), up to 9 hours (11.1% per hour drain) on Wi-Fi
Video playback: Up to 10 hours (10% per hour drain)
Audio playback: Up to 40 hours (2.5% per hour drain)
So a scenario of normal usage could be for example: 4 heavy hours of 3G internet browsing (66.4%), with one hour of call on 3G (12.5%) and 22 hours of standby (11%) = 100%
A battery life issue is a problem where the drain is really out of spec either during usage or standby or both. For example, multi-% per minute drain during usage or a 10% drain per hour during standby is problematic. Browsing the internet on 3G during one hour and losing 16-17% is not.
Apple's test methodology for claiming the specs:
http://www.apple.com/iphone/battery.html
Procedures
davidch tips (reset+full discharge recharge):
Go through these steps to address the battery after updating to iOS 5.0.1:
1. Reset all settings (settings app-> general-> reset)
2. Go through initial setup steps (lang, wifi, siri, enable location, etc) and choose setup as new phone (don't worry your apps, data, contacts, mail will still be there). Do NOT restore from iCloud or iTunes (It can copy back corrupt settings)
3. Turn off system location services timezone and iAd
4. Fully discharge battery (tilll it shuts off with the spinning wheel)
5. Fully recharge battery (overnight if possible)
In my experience this improves the Standby battery drain issue significantly in most cases. It reduces drain from 2-4% or more per hr to 0.5% or less. It has worked for many, many users now. If it does not work after a few try's you may have a real battery or hardware issue and should contact Apple. Good Luck!
ram130's variant of davidch i.e. additional steps:
Now using davidch original steps and attaching the tweaks I made to get me more usage. As shown on page 29.
Go through these steps to address the battery after updating to iOS 5.0.1:
1. Reset all settings (settings app-> general-> reset)
2. Go through initial setup steps (lang, wifi, siri, enable location, etc) and choose setup as new phone (don't worry your apps, data, contacts, mail will still be there). Do NOT restore from iCloud or iTunes (It can copy back corrupt settings)
3. Turn off system location services timezone and iAd
4. Fully discharge battery (till it shuts off with the spinning wheel)
5. Fully recharge battery (overnight if possible)
6. Disable Siri 'Raise To Speak' and REBOOT *( if possible use another camera to verify the                 infrared is off after the reboot).
7. Set emails, icloud and calendars to fetch. ** test. Mines on hourly.
8. If your in a no signal and your phone is saying "Searching..." even after 10mins, reboot while in that area and after 1-2min it should say "No Service". This mainly applies to Verizon customers and improve battery life in these areas.
9. *optional* Goto Settings > General > Network and you will see "Hotspot.." loading something, wait a few seconds and it should say "setup personal hotspot" then exit out.
* I notice a great improvement after disabling this and rebooting. This increased my "screen on" usage or at least helped it. Make the change.
** I have not tested push yet to narrow down the drain but I had this change on my phone. I believe exchange push is responsible for some stand by drain. As for icloud, haven't notice much of a difference. Just try it for a day. My email still came in fast most times. Again still testing, will report back on these..
buxbuster tips(wifi sync, iCloud):
These are my own tested workarounds that worked for my iPhone 4S and seemed to have worked for others as well :
Workaround number 1. Deselect wifi-sync in iTunes and press sync.
If that doesn't work try :
Workaround number 2 : Remove iCloud, reset network settings. ( I guess this won't work for you since you don't have it enabled ).
If both workarounds fail, you can always try to completely wipe your phone. That also solved some of the cases out there.
rolandomerida tips - i.e. buxbuster and additional steps:
Finally, I solved the syncing error loop. My contacts are syncing flawessly again between my devices and iCloud, and yes, the battery stopped draining, which is the main topic here.
I followed instructions from buxbuster (check his workaround a few pages up!) and an additional BIG step to restore contacts and syncing, as seen in a MacRumors forum.
This is what I did:
1. Make a backup of your Address Book, using the vCard option (or both, it doesn't hurt). Save it for later.
2. In your iPhone, delete iCloud account. When it asks, accept both: delete AND delete from my iPhone.
3. Reset network settings. The iPhone will restart, then will ask you to unlock the SIM card.
4.Turn Wi-Fi on.
5. Add the iCloud account again.
That's for Buxbuster's workaround. For some, it might work just like that. My iPhone repopulated from iCloud after step 5, but I still had that "server error" on iCloud. I had to do some extra steps, since my Mac was not syncing to iCloud and couldn't edit anything on my Mac or iCloud. Syncing back had to be fixed, too. If not, the syncing loop would continue from my iPhone, and the battery would drain awfully again.
1. In System Preferences -> iCloud, I turned Contacts off. I chose "keep on My Mac" those contacts, but I got an empty Address Book after a while. And a few minutes later, iCloud contacts were empty and my iPhone also. It is scary at first! Now, before importing that vCard backup...
2. Turn Wi-Fi off. This is important, since your contact-empty iCloud will attempt to wipe your Address Book from your Mac in seconds after importing.
3. Import your vCard backup to Address Book. Just drag it to your blank Address Book window; it asks if you want to import "x" number of cards. Of course, say yes.
4. Turn Wi-Fi on, and then iCloud contacts on again (System Preferences -> iCloud). It will offer to merge your newly populated Address Book with iCloud (which is empty at this point). It should upload every single contact to iCloud, and then to your iDevices. If not, a fifth step would be to import the vCard file to iCloud, but it shouldn't be necessary.
So, with iCloud syncing working correctly, there is no battery draining! Again, that was my particular issue.
I can't tell if this is the single answer to the widely spread battery draining problem, but it sure can be fixed with these workarounds, and yes, Apple should address the problem with a future update, for we affected customers don't need workarounds in the first place
This is the MacRumors discussion:
http://forums.macrumors.com/showthread.php?t=1256807
And dont' forget to check buxbuster's fix, video, and THANK him!
Miless tips (full 800mb release of 5.0.1 and sanitizing a restore):
As for 4S battery life. Try doing this,
1. Settings>Location Service ... disable all location services you do not need. In particularly Facebook because it drains the battery a lot.
Scroll down to the bottom at Settings>Location services>System Services ... Disable Setting Time zone, location based iAds, Diagnostic & Usage.
2. Settings>Notification>Calendar ... turn off the Notification Centre.
3. Settings>General>Reset ... do Reset All Settings. Doing this will not wipe out your iPhone. It will just Reset the network settings, location warning, keyboard dictionary, etc... but it will clear up some corrupted data there. Generally this will help.
Try these 3 steps first... if it still drains a lot, try the following,
4. Drain your battery down to 1%. Then charge it up using USB from PC ... not the charger. The charger output 1.0 A ( x 5V from USB ... you get 5W power). From PC, output is only 0.5A x 5V = 2.5W power. Charging is slower but trickle charge 4S helps the battery retain its charge better. I think it takes about 3-3.5 hours to charge full from USB/PC compared to slightly below 2 hours using iPhone charger.
If after doing the above still could not solve your battery issues (mine with iOS 5.0 was ok up to step 4, but not iOS 5.0.1).... plug you iPhone to a charger (any charger), from iPhone, access your iCloud ... set it up if you havent. Back up your iPhone data to iCloud. if you do not have enough storage (only 5GB is free), go to details and select the apps you need its data backup, choose only those you really need and leave those unnecessary ones out. Back up your camera roll to your PC/Mac manually as it could be too big to backup to iCloud.... once you have it setup, make sure you are on Wifi ... tap backup to iCloud from your iPhone. It will take a while if the file is huge.
Once backup to iCloud is completed, plug your iPhone to PC/Mac and launch iTunes 10.5.1 (make sure you have 10.5.1)
Click Restore. It will automatically initiate a download of iOS 5.0.1 ipsw for iPhone 4S. Wait for the whole process to finish, ie. download, restore software/firmware.
Once its done, do not set up your iPhone from iTunes. Set it up on your iPhone. Go through the selection. When prompted, select restore from iCloud (from your iphone backup earlier). Keep your iphone plugged into iTunes while restoring backup from iCloud. Because while restoring from iClouds, some data will be synced from iTunes if you plug in, e.g. music, video, etc... unless you bought these content from iTunes store. Apps will be downloaded from App Store from the cloud.
Once it's all done restored. Turn off your iPhone,.. and turn it on again.
Now, hopefully your battery wont be draining so fast anymore. Usually it wont after this. But you need to charge your battery at least 4-5 cycles to stabilize the charge on the battery. I dont know why... but battery life seems to get better and better for me after a few charge cycles after all the above work.
Good luck. Let us know if it works for you.
W. Raider tips (Sirii):
Bottom line for me of things that helped battery life are:
1. Turing off Siri and Rebooting the phone by holding the Home button and Top button down, ignoring the slider, until the phone shut down. (turn off Siri, reboot, and check top front of iPhone 4S against a lesser camera like the front-facing camera on an iPad2 - making sure the IR sensor is off)
2. Fully draining the battery, meaning using the phone until it shuts itself off from a drained battery and then recharging it to 100% about 4, maybe 5 times. I charged it both with a Mac and a wall charger.
Hope this is helpful!
Comments
jmm514 remarks (Twitter):
I may have found something. I had Twitter disabled in my notifications, but got a tweet today that popped up on my home screen. Didn't know I had this enabled. At the bottom of the Twitter notification settings is the home scrren toggle. Since disabling this, battery life seems better. Considering there is no setting for frequency of checking for tweets, it appears the phone is continually connecting to wifi to check for new tweets.
tmksnyder comments (notifications, corrupt data in iCloud):
For me, I found my iphone on wifi mysteriously connecting to my mac. I eventually narrowed it down to the Apple Move Trailers app which keeps a file in iCloud. The phone was trying to sync the file with the mac in the background even when the Movie Trailers app was closed (hitting the red x). Based on my macosx logs the iCloud process that was trying to sync was working directly between the phone and the mac without using itunes by connecting to an https address hosted on the phone. It was connecting every 3 minutes and failing (while phone was awake or awake during during a notification). I also found that iCloud control panel on OSX would error if I tried to delete the file. I fixed it by removing the App and doing a hard reset which stopped the sync. I probably could have turned off iCloud document sync in the phone but didn't think of that. My battery life has greatly improved while at home on wifi.    I am now at 28 hrs standby, 2 hrs 20 minutes of usage, and 68% battery. It was ok before where I could get 20-30 hrs standby and 6 -8 hrs usage. My usage today was phone calls, 3g surfing, and music via bluetooth in the car.
I also found even with Itunes iMatch, if I mass updated tages, art work etc, it would hit the phone on wifi even in standby. I was amazed.   Granted if I am not doing updates, Match won't hot the phone so this was a once in awhile event. I could drop my percentage by 5-10% in a matter of minutes when doing updates.   I think a lot of our problems are background processes, associated with iCloud, notification, and apps. More features means more battery.   I think the key thing is to keep track of what has recently been added or changed if battery life gets worse all of a sudden.   It may be an app that was recently installed and if possible you may want to completely remove it and not just quit it.
With twitter, i think it uses push notifications so it doesn't need to be running and actively poll on the phone. For instance , if i quit the mail app, i still will get mail notifications and can swipe the message and load mail. Apple Push Notifications servics maintain the connection to the phone and there are likely pings or connection checks that occur for the service on an os level not an app level. This minimizes the load so there arent a bunch of apps all runing and constantly checking. The notification service , if it is contacted from twitter or another service with data, will check the settings you have registered to the with the apple push service and send the notification to your phone. No matter what, there is a drain with notifications. M hunch is once one application is configured to receive notifications, connection checking occurs betwen the push service and the phone so it knows where it is on the network. If it is implemented correctly, these checks arent frequent if you are still and more frequent as you move. The other drain is for when the noification hits and is processsed. If i get 9 emails over night, my screen just popped up for 20 seconds or so to process each message using battery. I would even think that just go from low power to turning n the screen uses more juice than if the device was already on and i get the message. On nights I get no notifications, I see a 3 or 4 percent drop. On nights with a number of notifications, i have seen up to a 10 percent drop. Besides notifications, wifi sync and icloud will poll on the local network and use up battery if the host computer is on and running itunes or trying to sync a data file that is corrupt (which i had with the apple movie trailers app causing my phone to drain). For me turning off wifi sync and remving a corrupt file in icloud solved my battery issues and I get over 24 hrs of standby with 6 to 9 hrs of use and this is with all the normal location services and push serivices turned on.
See http://developer.apple.com/library/mac/ipad/#documentation/NetworkingInternet/Co nceptual/RemoteNotificationsPG/ApplePushService/ApplePushService.html for more info. I think it has a good overview of how the notifications work.

Well seems like that rumor of iOS 5.0.1 is finally gone the way of the dogs since developers got a beta of 5.1. So as stated earlier in the master discussion-> I suspect if you are filling up this thread with false post or creating a master set of links to various post that are unreliable you are wasting your time. Press is not going to touch the story due to poor or inaccurate sources which may be links from the master thread. This can include inaccurate information, combination of conflicting post or postings from users which may not own the device. Reputable press organizations have policies that require discloser and strict rules about what is a reliable source for a story. It is clear that many of the post in the master thread, which are links presented here are questionable.
Sorry to say that postings taken without any analysis of their totality have been propagated via various sites, for example sites such as http://www.2012federalbudget(dot)com. (Do not visit but I suspect that this is not the 2012 federal-budget site you would expect based on analysis of the records. There are plenty of sites like http://www.2012federalbudget(dot)com propagating questionable post in these threads.) One site for example in the discussion thread used a self signed certificate, the site had a log in to allow users to enter their OpenID. Seems many of these sites are pop and drop drupel configurations.
So remember this is how the really bad rumor of iOS 5.0.2 got started, the 5.1 memory leak issue, iCloud Issues, call quality, address book, etc.
Some of the postings have been very comical, I think the latest now is a dropbox issue. Seems that the length of the previous thread has resulted in various app engines of some proxy servers/tools reaching their limits.
So I would make sure to know the source of any information you link to. Make sure you avoid entering any information to outside links such as OpenID or Apple ID, these are big prize items for anyone with malicious intent. If you have issues and are a valid user contact APPLE CARE. (Note link is using McAfee Secure Short URL Service, and is https.)
http://mcaf.ee/ricdt
The original solution still represents a high level of success for users having any battery issues.
Install 5.0.1 on your iPhone 4s. Some users posting they are still using older versions, bad fake serial numbers, etc.
Make sure your device can run iOS 5.0.1 and is not altered.
Make sure you use a new Sim, not some cut down version which many users admit to doing. (Again, worth confirming what people are posting.)
Reset the device doing a hard reset and software reset.
Let battery drain and then charge for the full cycle, which is 24 hours.
I think you will find you will get the battery usage that APPLE has stated for the device.
Best of luck, stay safe and thanks

Fields in infocube and DSO?

Hi Experts,
                 I need some information regarding maximum number of fields in infocube and DSO?
     According to my knowledge, in Infocube - characteristics --248
                                                                         Keyfigures--233
                                                In DSO - key fields - 16
                                                              Data fields -749
             I thought dat DSO has 3 tables. maximum number of columns in a table is 255. So 255 * 3( 3tables in DSO) is 755.
                                             755(total fields)-16(key fields)= 749(data fields).
Is it correct?can anyone clarify my doubt pls?
Thanks in Advance
Jani Sk.

Hi,
       In cube , table consists of 255 columns, in which 6 are internally used by SAP,16 for dimensions and the remaining 233 are for Key figures. Each dimension key connected to 248 master data tables at max through dimension and SID tables.So, We can analyse the data at 16*248 dimensions.
ODS/DSO is a two dimensional flat structure.It consists of total 1024 columns, out of which 16 are used for Key fields and remaining 1000 are for data fields.
Thanks,
Sandeep

Automatic mapping of fields in transformation between DSO and Infosource.

Hello BI Experts,
When i migrate the update rule between DSO and infosource in to transformation, the log of successful copy of routines and hence the creation of transformation appears. But when i open the transformation for activating it, there is no mapping between the fields as well no routines appear.
Please suggest me the way out of it.
Points will be assigned.
Regards,
Vinayak

VGM,
By the way how are you migrating the routines into BI 7 from 3.x??? And moreover the update routine has to be a local routine in BI 7 or else a start routine or else end routine??? You need to decide where it will be applicable and then copy the old code and modify it and paste the same. If you are creating any start or end routines to populate data for some object, do remember that the objects should map with any one of the object from Infosource.
Hope this helps
Regards
Gattu

Can you please help me out the Info Cubes info for Budget Execution?????

Hi,
Can you please help me out the Info Cubes info for Budget Execution and Cash Management.
Thanks in advance,
Andy

Take the memory card out of the camer and put it in a card reader. When it mounts on the desktop select it and try to change the name. However, that might make it incompatible with the camera. You'll just have to try and see.
OT

Error for Budget exceeded for Network does not show up while creating PR.

Hi SAP Gurus,
We have an issue while creating a purchase Requisition from Network. When we enter the Toatal Amount in the PR and if the total Amount is greater than the total Budget for the Network, the error "For item 001 Ntwk actvty XXX & WBS element XXX budget amount XX USD exceeded " is not showing up in the foreground by the system and hence not able to create PR. It seems that while trying 30-40 times, the system will show this error in the foreground once or twice only and we want this to be appears in the foreground consistently. Can you please advice how to fix this? Thanks,
Reagards,
Imran.

Hi,
you need to maintain sufficient budget in respective WBS element by using transaction CJ30 and by releasing budget through CJ32.
Check the budget availabilty in report s_alr_87013558.
It will resolve your issue
Regards,
Sandesh Sawant

Infocubes and Infosources for Budgeting in BPS

Similar Messages

Maybe you are looking for