Infocus LiteShow II wireless projector adapter

Hi Everyone,
I just wanted to know if anyone has worked with the LiteShow II adapter and LWAPP ap's. I have a problem where I set up a WPA-PSK network and the device fails to connect. The client status said that it failed the authentication policy on the WLC. From a laptop everything works fine. I just can't get the device to connect to my LWAPP 1242's. I contacted Infocus about this and they are very slow to respond. I even tried the connection to the wlan with everything set to "open" mode. That didn't work either. Is there some kind of policy that I need to change to allow 3rd party AP's to connect to the wlan as a client? It's almost like a WGB, where the client connects to the Infocus, gets a 10.0.0.x address, and then the infocus bridges the 10.0.0.x network with the wlan's network. Is that not supported with LWAPP ap's? Any insight would be helpful.

We had a similar issue with projectors from a different manufacturer. Try setting the IP addy of the projector manually and if there is a gateway setting on the projector point that to the IP addy of the AP. Also make sure that you have layer 3 for LWAPP transport. Layer 2 will not work.

Similar Messages

HP B500 Wireless Bluethooth Adapter for HP Printer Not Working With Windows 8.1

I have been using the HP BT500 bluetooth Wireless adapter to print wirelessly to my HP Officejet Pro 8500 printer. I have been using Windows Vista, but recently upgraded to Windows 8.1. I learned after the upgrade that the HP B500 wireless bluetooth adapter is not compatable with Windows 8.1. I have attempted to find a driver upgrade for the B500, but there does not appear to be one available. I have also searched the HP site and other sites in an attempt to locate an alter wireless blotth adapter to replace the B500, but have again been unable to locate one.
Is there a wireless bluetooth apter that will allow me to print wirelessly to my HP Office Pro 8500 from my laptop?

Hi @Raider83,
Welcome to the HP Forums!
I noticed that your HP B500 wireless bluetooth adapter for your HP Officejet 8500 is not working with Windows 8.1. I am sorry to hear this but happy to look into this for you!
I am not sure if you are using a 32-bit or 64-bit Operating System. But sometimes with Windows 8.1 you can use compatibility mode to install an older version of the driver. Which might help the situation. Here is a link to some other Windows drivers, HP bt500 Bluetooth USB 2.0 Wireless Adapter Drivers.
Once you got a driver downloaded, follow this guide, Make older programs compatible with this version of Windows, on how to install it using compatibility mode. It is not guaranteed to work, but it is worth a try!
If you still need me to look for other bluetooth adapters, please respond with your printer's Product/Model Number. To find your printer's Product/Model Number follow instructions in this link. Finding Your HP Product Model Number. As there are multiple HP Officejet 8500 printers.
Thank you for posting, and have a nice day!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

HT5019 I connect my macbook pro to an Epson wireless projector. The macbook can see the projector wirelessly and the image on the macbook is displayed on the projector. However on system ref., the arrangement tab does not show and thus cannot have multipl

I connect my macbook pro to an Epson wireless projector. The macbook can see the projector wirelessly and the image on the macbook is displayed on the projector. However on system ref., the arrangement tab does not show and thus cannot have multiple view.
I am trying to project Pro Presenter on the Epson projector such that I have the detail screen on the macbook and only the screen I want people to see on the projector display. This has not been possible because the arrangement tab on the Display section of the System Preference is not showing. If i tried to search for the arangement, it comes back with the message that there is not other source detected, hence the arrangement tab is not showing.
I have also tried to connect the Epson directly to the Macbook but it still the same result, so its not because it is a wireless connection. Can someone advise me jhow to go around this problem. I have used windows before and it is very easy to extend ptojection on windows, but this system seems to be frustrating to me.
Thanks,
Toks

Hi Toksyb!
You may want to try clearing out the PRAM on your computer. This process is explained through this article:
About NVRAM and PRAM
http://support.apple.com/kb/ht1379
Thanks for using the Apple Support Communities!
Cheers,
Braden

Wireless printer adapter issue

I purchased an HP802.11b/g Wireless Printer Adapter for an HP H470wbt printer; I installed the driver on a laptop with Windows Vista; I could never get the printer to work wirelessly; I recently purchased a new laptop with Windows 7 and attempted to install the wireless printer driver but failed - I believe it is because the driver is not compatible with Windows 7.
I cannot even find the product on HP's website to see if there is any installation upgrade.
Can anyone offer how I might make this work?

OK, I just got it to work....unplug the power cable from the printer, and unplug the power cable from the outlet...wait 30 seconds and replug. If the printer does not power up on it's own, power it up. I also reset my router. After a day of trying to figure this out, it's working. BUT, it definitely had something to do with the Mac Software Update. Hope it works for you!

How to get an N wireless USB adapter to transfer data faster that 54 Mbps

How to get an N wireless USB adapter to transfer data faster that 54 Mbps? I am running FIOS 10/2 and connected to a ActionTec M1424WR router. Any help will be appreciated.

I have to ask the question, why are you in need of 802.11N speeds? Are you transferring lots of files between other PC's on your network or are you simply connecting to the Internet.
Remember if your Internet speed is 10/2 which means 10 meg down and 2 meg up having 300 meg capability WLAN connection will not be noticeable. Your bottleneck is your Internet connection of 10/2.

Atheros AR5007EG Wireless Network Adapter - With any driver: "The device instance name is invalid"

Hello there,
I was trying to install various "Atheros AR5007EG Wireless Network Adapter" drivers, with versions ranging from 2007 to 2010, both from the manufacturer and specifically for this computer (a Fujitsu Siemens Esprimo Mobile) and others from here:
http://www.atheros.cz/atheros-wireless-download.php?chipset=22&system=3
All of them are for Windows Vista 32bit.
The computer had previous drivers installed and working, but also had a network problem. In the process of figuring out what was causing it, I tried to install newer drivers to see if that was the problem. It turns out the network problem was due to a different
thing that is now fixed (some dependencies of the WLAN Configuration service were turned off), but I'm still stuck installing the new drivers.
TL;DR:
However, every time I install new drivers, after install, Windows says that
"The device instance name is invalid", regardless of what drivers I install. I even tried to install drivers for different hardware in that slot just to see what it told me and IT STILL gave me the same error. I also tried to uninstall the
current driver, checking the box to delete the driver's software, running CCleaner and then deleting
"athr.sys" from the Windows/Drivers folder and
"oem8.inf" from Windows/Inf as those files were referenced in the driver's properties. The install still gives me the same error.
The fact that it gives me this error with any driver leads me to believe it's Windows' fault and not the driver's.
Note: I am translating from the original in Portuguese. "The device instance name is invalid" is the closest/correct translation and seems about right with the info I find online regarding the english version of Vista and how it refers to devices.
This (https://groups.google.com/forum/#!topic/microsoft.public.development.device.drivers/yFa_XnlcLJQ) and this (http://finderr.net/windows/pt-PT/O-nome-da-inst%C3%A2ncia-do-dispositivo-%C3%A9-inv%C3%A1lido-/2082573452) also seems to confirm that, though it
doesn't help me. It may be that the text is actually different in english Vista but I also searched for driver instead of device or stuff like "The device instance name appears to be invalid" and can't find anything either.
I also did SFC /SCANNOW a while ago and it found no errors. I then repeated it again after this problem and this time, SFC found errors BUT it couldn't repair all of them. Here is the CBS log:
https://www.dropbox.com/s/bayum2rsezxpmre/CBS.log
Thank you for the help!
EDIT: The Notebook model is a Fujitsu-Siemens ESPRIMO Mobile V5535 and their support drivers can be found here (after specifying the OS and model):
http://support.ts.fujitsu.com/download/ShowFiles.asp
EDIT2:
The last SFC /scannow scan repaired everything left to repair. The system restore option can't be used because the earliest one still has the (suposedly faulty) drivers installed.
This computer has a Win Vista serial number, but no CD and the second partition doesn't have any kind of backup. The second partition is empty though. So, as a last resort, if I really don't have a choice, I'll try to do an upgrade install to see if that fixes
it and if that still doesn't fix it I'll have to move everything in the users folder to the second partition and format the first which is a bummer :/
EDIT: Here is the setup.api.log that was inside C:\Windows\Inf and details the instalation process of all the drivers:
https://www.dropbox.com/s/tyxs1e4r7rxofch/setupapi.dev.log
I'm still trying to read into that setup.api.log file.

So, can I assume that the only way to fix this error is to download an iso of Windows Vista, unninstall my service packs, upgrade install Vista, run Vistalizator to change the language to Portuguese and then install Service Pack 1 & 2?
EDIT: Alright, so I formatted the thing since the driver bug wouldn't give me a break. The details on that can be found searching for the same thread title either on tomshardware or vistaforums if anyone happens to find this looking for the same error.
I have a real knack for bumping heads with errors that nobody else gets that somehow turn into unfixable bugs. At least if someone else searches for this problem they'll know what to do.

Wireless Projector and Macbook Air

I have a Macbook Air and I will be giving a presentation next week. I was told that they have a wireless projector for me to use. What exactly do I need to use a wireless projector on my Macbook Air? I have the cord that is used to attach for wired projector, but I have not used wireless before. I am not sure the brand of the projector if that makes a difference.
Thank you!

I would contact the host of the presentation and see how their setup works. I copied the information below from a 2010 posting. Hopefully the host has a usb interface for the projector (similar to what some mice have as a transmitter from the usb port)
================================================================================ =
So you want to use the projector as the monitor for a computer, but you want to use wireless to join them?
You won't be able to do that using an Airport network. Computer networks can only pass data that's been specially formatted. They can't pass video streams in a form that a monitor or projector can understand.
To do this you need a video sender - a device that accepts a video feed from a TV, DVD or satellite box, then sends it wirelessly to a receiver which you connect to your TV or projector. In your case, you would need an S-Video output on the computer to connect the sender, then connect the receiver to the S-Video input on your projector.
Problem is, video senders don't work as well as cables. You'll get some degradation of picture quality (noise) and possibly some interference from other wireless devices (dropout).
If you want to watch video that's stored on a networked computer, with decent picture quality, you'll need to connect a computer or a network media player directly to the projector using a HDMI or DVI cable.
================================================================================ =

How to mirror iPad video using ATVS and wireless projector

I have an iPad2 (iOS 7.1.2) that I have connected to an Apple TV, - which is connected to a wireless projector. It works great except when I try to play video. It doesn't matter what type of video...movies, user created, safari website...I get a message that “an error occurred loading this content.” I have tried everything I can think of and have spent too many hours trying to find a solution. Anyone have any ideas? I appreciate any help!

It's pretty much just plug it in, though doing something the first time in a live presentation, without having the opportunity to test things first, is a scary proposition. You'll get the presentation on the projector and a "presenter" display with tools. See:
http://support.apple.com/kb/PH3489
Hope all goes well.
Regards.

Need mac driver for TP-Link Wireless USB adapter TL-WN7200ND

i need Mac driver for TP-Link Wireless USB adapter model no TL-WN7200ND

First of all, TP-Link does not provide OS X drivers for that adapter. However, there are other sources that have drivers like this one. It is not official and it may fail, but it has been tested by other users and it works correctly.

I just purchased the BEM Wireless Projector. Is it "Bluetooth" wireless? The only way I can make it work is with cables.

I just purchased a BEM Wireless Projector. Is it "Bluetooth" Wireless? The only way I can get it to work is with cables.
I also purchased "Ultimate Ears UE Boom" speaker. I was hoping to run it simultaneously for the sound while projecting video on the BEM Projector. Can this be done?

The projector is not wireless.
See this:
Kickstand Micro Projector from BEM Wireless
http://smallbiztrends.com/2014/02/micro-projector-bem-wireless-review.html
Clarity on the name – I thought the projector operated on a wireless frequency. It does not. The company got its start in wireless speakers and thus the company name creates a little bit of confusion. However, small point – the projector still works great and when I think about it – trying to run big files via wireless would be pretty tough.
And you can use the Bluetooth speakers.
Austin

Wireless Projector Needed To Operate As Second Display

Thanks in advance for an explanation or help.
Looking for a wireless projector that will be detected as a second display. I am using an Epson that has wireless features but is not detected as a display. It only gives me the option to send images to the projector using it's built in capability.
Any other brand of projector, add on or way to make the Mac see the wireless projector like a connected second monitor?
Thanks
Message was edited by: Jerry Z.

Thanks, but my questions is a bit more technical than that. Wireless projectors generally allow you to send images, but it appears that they are not generally detected as displays in the System Prefence Pane for monitors.
Looking for a reply with someone who has specific experience with my request.
I am all about Google and have Googled to no avail.

Using AE as wireless ethernet adapter

I've read through the airport express manual but can't seem to find if I can configure it to serve as a wireless ethernet adapter. I have an existing 802.11g wireless network (from a Westell router) and want to connect a computer that only has wired ethernet. I'd like to plug this computer into the wired connection on the AE and use the AE as a bridge to the existing wireless network. I know there's other hardware designed to do this, but I'd also like the AE's audio out at this location.
Thanks for the help.

It is not possible to do this with your current router. I don't believe your current router can do WDS network with Express, which is the only way you can activate ethernet port.

Software downloads for Aironet 350 Wireless LAN Adapter

Where can I get the software to install the Aironet 350 Wireless LAN Adapter? Will it have a client manager? I think that's what the software is to switch settings as you change locations.Model: AIR-PCM352

Hi,
You can download the software from the below link using your CCO login:-
http://tools.cisco.com/support/downloads/go/Redirect.x?mdfid=278875243
Cisco Aironet Wireless LAN Client Adapters
Cisco Aironet 340 Wireless PC Card Adapter
Cisco Aironet 340 Wireless PCI/LMC Adapter
Cisco Aironet 350 Mini-PCI Wireless LAN Client Adapter
Cisco Aironet 350 Wireless LAN Client Adapter
Cisco Aironet 5 GHz 54 Mbps Wireless LAN Client Adapter (CB20A)
Cisco Aironet 802.11a/b/g CardBus Wireless LAN Client Adapter (CB21AG)
Cisco Aironet 802.11a/b/g PCI Wireless LAN Client Adapter (PI21AG)
Plz rate if this help.
Regards
Inayath Shariff

Wireless lan adapter

do i need a wireless lan adapter for my tv to connect with wireless router?

Yes, if it doesn't have wireless built in. Provide the model number of the TV if you wish specifics.
I am a Bestbuy employee who volunteers on these boards on my own time. I am not paid for posting here, and you should understand that my opinions are exactly that - opinions. I do not represent Bestbuy in any way.
: Open Mailbox

Need a wireless usb adapter that works with my iMac G4 Flatscreen

I have an iMac without an airport card. I am trying to find a thrid party solution. Does anyone know of a third party wireless usb adapter that works with my Mac?
Linda

Hi Bill I noticed that list you posted mainly shows devices that require purchasing 3rd party drivers from companies such as ioxperts.
If you use a device that has ralink chipset you can use their drivers free of charge.
ralink drivers
Devices that use ralink chipsets

Infocus LiteShow II wireless projector adapter

Similar Messages

Maybe you are looking for