Infomation Broadcasting

All,
When I scheduled the information Boradcasting with option Distribution type as "send as e-mail" and output format as "Independent HTML file"
I am getting e-mail with four files
1.0QUERY_TEMPLATE_BROADCASTING_00001.htm.HTM
2.BWReports_ie5.css.CSS
3.pixel.gif.GIF
4.s_b_right_35.gif.GIF
I am not getting the report embbed in my email.is there any MIME setting needs to be done in order to get the report as a part of mail instead of getting as attachment file ?
Thanks for your help..
Raman

Hi,
Check these.
http://help.sap.com/saphelp_nw04/helpdata/en/a5/359840dfa5a160e10000000a1550b0/content.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/84/30984076b84063e10000000a1550b0/content.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/0bfcac90-0201-0010-52a3-d5b270b86ef3
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/5c6b686a-0901-0010-8aab-c4d0e5a093a7
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/40811e9c-4edd-2a10-06bd-c41e475f607a
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/709d747f-6b08-2b10-8f8c-b3e3c8c4ccd3
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d09dea78-b61a-2b10-c7ad-acd94d64079a
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/00d91245-1f5d-2a10-c795-8394960f56cc
Regards.

Similar Messages

Error Message no. RSBOLAP018 Encountered during Infomation Broadcasting

Hi Gurus,
While Doing Broadcasting a Report from Portal, the background job (in sm37) is failing with the following error:
Message no. RSBOLAP018 --
Java system error: max no of 100 conversations exceeded / CPIC-CALL:'ThSAPCMRCV' : cmRc=17 thRc=450 No memory available
Error occurred during processing of framework class CL_RSRD_PRODUCER_PRECALC, type PROD
This error is not consistent as most of the times Report is broadcasted successfully and User is receiving the Report via mail but the same fails at times.
Please advice the way forward in debugging the issue from here. Any pointers as to what could be the reason behind this error message would be of great help.
Many Thanks,
Shwati

26.07.2011                                        Exchange Infrastructure: Test LCR Connection                                               1
Properties of RFC destination SAPSLDAPI
RFC host:
%%RFCSERVER%%
program id:      SAPSLDAPI_PRD
gateway host:
vijay
gateway service: sapgw00
Testing the RFC connection to the SLD java client...
RFC ping returned exception with message:
max no of 100 conversations exceeded / CPIC-CALL: 'ThSAPCMRCV'
No memory availab
Summary: Connection to SLD does not work
=> Check SLD function and configurations
Now checking access to the XI Profile
Properties of RFC destination LCRSAPRFC
RFC host:
%%RFCSERVER%%
program id:      LCRSAPRFC_PRD
gateway host:
vijay
gateway service: sapgw00
Testing the RFC connection to the SLD java client...
RFC ping returned exception with message:
max no of 100 conversations exceeded / CPIC-CALL: 'ThSAPCMRCV'
No memory availab
Whats the solution plz
regards
VP

Infomation Broadcasting with Email Bursting with hierarchy

Hi,
We have a scenario where based on the employee hierachy, we need to use email bursting. We have following emplyoee hierarchy.
Employee_Manager
-> Employee_1
-> Employee_2
The infocube contains data for expense made by each employee. So if employee_manager should be able to get expense incurred by employee_1, employee_2 and employee_manager.
The requirement is to send report to manager for expense made by his/her team.
This employee infoobject has the attribute as username where the email should be sent.
The problem is ->
when I run the email bursting with selection employee manager, it only sends data for employee_manager and not for employee_1 and employee_2.
So basically the email bursting does not consider hierarchy.
Any inputs is appreciated.
Thanks,
Parin Gandhi.

Hi Parin,
Hope you are doing well. It seems bit tricky. I would try by creating a hierarchy node variable & restricting that to emploeyee manager. It may help you to avoid skipping of em_1 & emp_2 from distributing report. Not sure if it helps.
Cheers,
Ramesh

Precalculated Value Set - Query Designer - information Broadcasting NW2004

Hi Buddies,
Needs your help!
i have question regarding to the precalculated Value set distribution type for infomation Broadcasting NW2004.
According to my understanding, firstly i created a broadCasting setting Z_Test based on Query1 to calculated the value Set, for example , for company code.
And then in the Query Designer, New a Query2 which contains a Variable type precalculated value set and its default value point to the broadcasting setting created before.
but when i check the query, it present an error message : 'Default value for Variable 'PM_Comp' are not within permitted value range'.
could anyone can help me out with it?
Thanks a lot!!
B.R
Vivi

Hi,
I am also getting the same error. Have you got any solution ??
Regards,
Sheetal

Cannot Precalculate workbook. Precalculation in thread 1 failed

Dear Experts,
I have an issue in Infomation Broadcasting. I have scheduled an job to distribute the workbook. In sm37, he job status has been Finished. but no emails have been triggered. I checked in RSRD_LOG and i am able to see the following message.
I am not clear about the error message.
Precalculation server was started
*Connection passed
Load workbook 46KNKDJOMMFLDSKW033LMFKLKJ
Start precalculation against RFC server USSTUBWP9V
Connection passed
Precalclulation in thread 1failed.
Cannot precalculate workbook YEAR_END_SALES_REPORT
Could any one help to fiox this issue?
Thanks in advance.
Krishna

Hi Sree,
Check the status of the PreCalc server in RSPRECADMIN.
If it's in yellow status try to restart it.
Also check if there isn't any old jobs stuck in the queue:
You can do this by right-clicking on the Precalc server and going to "Display Current Queue".
There's also a How To guide on troubleshooting Workbook Precalculation Problems.
Try searching for it on SDN.
Hope it helps.

Automatically Run Business Warehouse Reports to a location or email

If you are familar with Business Objects you are familar with the functionality i am looking for. I have reports that i would like to publish daily to a location on the network. I desire not human interface each day, just the refreshed report. Is this functionality that is available in BW?
A newbie. Thanks

Hi
Yes it is possible to excute the reports in the background and publish to some folder or email by using infomation broadcasting. You need seperate license to use this feature in SAP BI.
Search for broadcasting in saphelp. You will find lots of information.
Thanks
SRikanth

Logical filename in broadcasting

Hi everyone,
We want to use the bursting functionality to broadcast a report to the portal. We'll split the result to profit center so each profit center gets a seperate pdf document. Now a few hundred pdf files get created but it's unclear which file containts data for which profit center (without opening each file). Is there a way to add the profit center to the filename of the pdf document created? We've lookad at the variable on filename creation but these are not sufficient.
Kind regards,
Alex

Hi Alex,
I've found a discussion between SAP dev and another customer... where dev refers to the following...
Filename: (Mandatory) this name is used for the directory name. This
name is also the technical name of the directory in the database. The
query_name/tempalate name is taken as default.
"Display Name: If provided, replaces the Filename for user display on
the portal.
If a control query is used (which may generate multiple files), then
the end files are names based on query_name/tempalate name + index."
Do you have the option of a display name?
Please read the following...
Broadcast to the Portal
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/29/f50b40c6c01961e10000000a155106/content.htm
I hope this helps
thanks
Orla.

DVI to Video adapter CRT Broadcast Monitor? Is there a better option?

I am a freelance motion graphics artist, and I use Final Cut Studio, After Effects, Photoshop, etc.
I need a CRT monitoring solution for checking my color grades, etc.
SD resolution is fine, and i've got my eye on a JVC TMH-150CGU broadcast monitor from B&H. It has an S-Video (Y/C) input.
I'm thinking of using the Apple DVI Video Adapter hook up to it via S-Video.
I have a Pantone Eye-One that I can use to calibrate the monitor.
Would this setup work ok in the above applications? Will it support Digital Cinema Desktop Preview in Final Cut?
I have the 30" Apple display. Will connecting the CRT via DVI steal 256mb of my video memory???? That seems drastic considering it's already driving a 30" display AND running after effects!!
I've thought about FireWire monitoring, but I suspect the FireWire/DV 4:1:1 compression will affect the colors.
I know a CAPTURE CARD would be ideal, with SDI, etc... but I don't really have a need for a full blown capture card at the moment. I don't think use it to it's full potential (ie- to capture). It seems silly spending $$$$ just for a monitoring solution.
Or is a capture card my only option for pro monitoring? If I was to buy one, i'd want a future proof one should I digitize in the future (ie, HD, with analog support), so that leaves either a Blackmagic Intensity Pro (which I believe is only 8 bit) or a BlackMagic Decklink HD Extreme. And then i'd also need the SDI or Component expansion card for the JVC monitor, and before I know it, i've spent over $1000, just for a decent monitoring solution. Ouch.
I strongly considered the Intensity Pro card, because I could monitor SD component, and HDMI HD from the same card. But it put me off when I heard it ws only 8 bit. But it is 4:2:2 though.
What might KILL the Apple DVI adapter option is I have a TON of PAL footage, and I heard the adapter is NTSC only (or a seperate PAL version). So even though the monitor supports both standards, the adapter doesn't. Or so I've heard.
Very confused. Any other options or advice would be greatly appreciated!
Thanks!

Hi,
From the sound of things you have answered your own question.
If you wanted a CRT to just check video playback, safe areas and text legibility then a cheap option of monitoring via a deck or camera would suffice.
You mention a lot of PAL footage just as a FYI this would be 4:2:0 as opposed to 4:1:1 with NTSC under the DV codec.
You don't mention (and I'm sorry if I missed it) what codec you output to. I had always found when working with DV only that a DV monitoring solution was sufficient for most applications.
However as you indicate that colour plays a factor in the equation bite the bullet and get a decent monitoring system from the off. I am using the Decklink Extreme and have found it to be excellent especially in real time conversion and monitoring of HD to SD.
In addition you get the ability to work all the way up to 10bit (drives allowing) and capture over SDI with full deck control.
You could stagger the cost since the BM card will let you monitor composite out in addition to component so the expansion board for the CRT might not be a must have from the get go for you.
Whatever route you go you will want to calibrate the CRT using broadcast colour bars rather than a Pantone system, theres plenty of info on the web regarding this . . and why.
Message was edited by: Steve Mizen

What is new in Broadcaster 2004s

Anyone have a simple overview with some details why we should change from reporting agent to Broadcaster (we are on 3.5.3

Reporting Agent will be only supported in the 3.X runtime in 2004s.
All the new functionalities like Bursting, PDF etc will be implemented in Broadcaster only.
See attached documentation for new functionalities in Broadcaster.
https://websmp203.sap-ag.de/~sapdownload/011000358700004219392005E/ERQA_INFOBROADCASTING.PDF

Error While executing a broadcast setting in BW 7.4

hi dear BEx Gurus,
I am using BEx Broadcaster to a great extent, many of our critical reports are being sent to the users though BEx Broadcaster. Everyday around 700 triggers are executed automatically. These were working perfectly before we upgraded our system to BW 7.4. I am seeing this error message(Please refer to the screenshot) while I execute the broadcast setting manually from the BEx Query designer --> Publish --> Boradcaster.
Your suggestions/guidance will be highly appreciated. Thanks in advance
Regards
Ranjan Jinka

Hi Brendon,
Hope you are doing great !
I think I need your help again... Your previous solution to my problem worked perfectly last time. But, this time, it is not solving my problem. we applied the latest patches in our BW System (BW 740 SP9) and after this update, BEx broadcaster is returning the same error(Please refer to the below screenshot). And, as per your suggestion, I have activated the web template 0BROADCASTING_TEMPLATE.
But again, it is returning the same error. Your help will be highly appreciated.
Activation of 0BROADCASTING_TEMPLATE
Thanks & Regards,
Ranjan Jinka

Unable to receive UDP broadcast packets on PPP connection

I am struggling for two days now with no success. I have two modems (do not ask, some special stuff), that uses dial up (PPP) connection. I tried this on windows XP and it works like a charm. I am sending unicast and broadcast UPD packets. If I
repeat that on Windows 7 i can send only unicast data, broadcast packets seems to be lost somewhere. I tried to use Microsoft Network Monitor and I can see that broadcasted packets are being received on my PPP connection. But after that, they are gone. Somewhere
in the kernel. I truly do not understand why. I disabled firewall, antivirus, base filtering engine, tried to log dropped packed in Windows
Filtering Platform, tried clean WIN7 machine and all that with no success.
Here is a sample packet received on interface, but it has newer reach my app:
No. Time Source Destination Protocol Length Info
1 13:20:56.093380000 192.168.1.50 192.168.1.255 UDP 49 Source port: x11 Destination port: x11
Frame 1: 49 bytes on wire (392 bits), 49 bytes captured (392 bits)
Encapsulation type: Ethernet (1)
Arrival Time: May 7, 2014 13:20:56.093380000 Central Europe Daylight Time
[Time shift for this packet: 0.000000000 seconds]
Epoch Time: 1399461656.093380000 seconds
[Time delta from previous captured frame: 0.000000000 seconds]
[Time delta from previous displayed frame: 0.000000000 seconds]
[Time since reference or first frame: 0.000000000 seconds]
Frame Number: 1
Frame Length: 49 bytes (392 bits)
Capture Length: 49 bytes (392 bits)
[Frame is marked: False]
[Frame is ignored: False]
[Protocols in frame: eth:ip:udp:data:vssmonitoring]
[Coloring Rule Name: UDP]
[Coloring Rule String: udp]
Ethernet II, Src: ae:4e:20:00:01:00 (ae:4e:20:00:01:00), Dst: Xerox_00:00:00 (01:00:01:00:00:00)
Destination: Xerox_00:00:00 (01:00:01:00:00:00)
Address: Xerox_00:00:00 (01:00:01:00:00:00)
.... ..0. .... .... .... .... = LG bit: Globally unique address (factory default)
.... ...1 .... .... .... .... = IG bit: Group address (multicast/broadcast)
Source: ae:4e:20:00:01:00 (ae:4e:20:00:01:00)
Address: ae:4e:20:00:01:00 (ae:4e:20:00:01:00)
.... ..1. .... .... .... .... = LG bit: Locally administered address (this is NOT the factory default)
.... ...0 .... .... .... .... = IG bit: Individual address (unicast)
Type: IP (0x0800)
Internet Protocol Version 4, Src: 192.168.1.50 (192.168.1.50), Dst: 192.168.1.255 (192.168.1.255)
Version: 4
Header length: 20 bytes
Differentiated Services Field: 0x00 (DSCP 0x00: Default; ECN: 0x00: Not-ECT (Not ECN-Capable Transport))
0000 00.. = Differentiated Services Codepoint: Default (0x00)
.... ..00 = Explicit Congestion Notification: Not-ECT (Not ECN-Capable Transport) (0x00)
Total Length: 34
Identification: 0x0032 (50)
Flags: 0x00
0... .... = Reserved bit: Not set
.0.. .... = Don't fragment: Not set
..0. .... = More fragments: Not set
Fragment offset: 0
Time to live: 126
Protocol: UDP (17)
Header checksum: 0xb817 [correct]
[Good: True]
[Bad: False]
Source: 192.168.1.50 (192.168.1.50)
Destination: 192.168.1.255 (192.168.1.255)
[Source GeoIP: Unknown]
[Destination GeoIP: Unknown]
User Datagram Protocol, Src Port: x11 (6001), Dst Port: x11 (6001)
Source port: x11 (6001)
Destination port: x11 (6001)
Length: 14
Checksum: 0xafd1 [validation disabled]
[Good Checksum: False]
[Bad Checksum: False]
Data (6 bytes)
0000 34 34 34 34 34 34 444444
Data: 343434343434
[Length: 6]
VSS-Monitoring ethernet trailer, Source Port: 127
Src Port: 127
I am running out of my ideas, if anyone could help, with any idea, please do. I am not sure if this feature is dropped in win7 or not.

Hi,
From your description, you may gather the network monitor traces to ensure which part lost UDP broadcast packets.
Thank you.
Best regards,
Stevens Song
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

What is the diffrence between multicasting and broadcasting?

hi friends
What is the diffrence between multicasting and broadcasting?
i'm bit confused in multicasting and broadcasting.

Broadcasts go everywhere within a range determined by the sender.
Broadcasting is deprecated and unliikely to go beyond the nearest router.
Multicasts go everywhere where receivers have declared they are present.
Multicast can be implemented beyond routers in a WAN which you control but ISP routers generally don't support it.

Information Broadcaster Utilizes 60 to 90 % of Java Stack CPU

We are currently on BI 7.0 and EP7.0; we have started using Information Broadcaster and we are noticing that it utilizes 60 to 90% of CPU on the Java stack.
One thing to inform is that we are using the same Java Stack for Portal, BI and R/3.
90% of CPU seems abnormal to me (At the peak of its usage the Portal Performance goes down).
Will this issue get solved if we use a dedicated Java Stack for BI? Thoughts Please.
Regards,
Deepak

Deepak,
We too facing the same problem.
After proper analyzation our experts decided to go for a dedicated Java Stack for BI to increase the performance.
Regards,
Ramkumar.

Select All in a BBM broadcast

I would like to have this feature (Select All in a BBM broadcast) added back to OS 10. The main point of having/using BB is the ability to send broadcast messages! My 153 contacts may not be a whole lot in the big scheme of things, but it is a royal pain in the butt to be selecting each one by one!!!!!!!!!!!! I have patiently waited for my Z10 and OS 10 and resisted all efforts to woo me to Samsung and iPhone, so please don't let me regret my decision!

Feature Requests for BlackBerry10 OS
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

CRM_UI pointing to wrong port while broadcasting any report

Dears,
Our BI team is facing one starnge issue in CRM_UI.
Earlier we were using port 50001 to access CRM_UI but now we changed it port to 443XX.
So I CRM_UI is working fine and we are able to see BI report on it but when we click on send it takes us (Bex Broadcaster) to URL that containd same old port so I think I need to make some change in any parameter to make it to point to right URL.
Please suggest how can we do these settings.
Shivam

Hi Sharon,
thank you for your help.
I've created the running total, and tested it again, however, the issue still remained.
The regional options for date are set to be dd/mm/yyyy
I created a formula to evaluate referingDate <= @PeriodEnd, and put it next to the referingDate filed, in the Detail section. All dates should be <= @periodEnd, however, running from the application I got the following results
for example, @periodEnd is 01/07/2008 (dd/mm/yyyy)
01/02/2008 True
01/11/2007 True
03/04/2008 False
which looks like that it's using the format mm/dd/yyyy.
Running from Crystal it shows True for all the dates, which is right.
Is there any chances for the application to get a different date configuration???
thank you
Jamal

Infomation Broadcasting

Similar Messages

Maybe you are looking for