InfoObject 0RECCCNSVAL (version A) is not compounded

Hi,
Could you guys please explain me why this error occured.
I am implementing the Inventory Analysis scenario and have activated relevant objects in BC .
Created Transformations and DTP's
But while executing DTP, I am getting this error.
Awaiting for your kind response.
Thanks,
Sonu

Hello,
You can check whether KF 0RECCCNSVAL is active in the system.
If its active, try to activate the infoprovider even though it shows as active. Re-avtice it once..
Regards,
Shashank
Edited by: Shashank Dighe on Apr 20, 2009 9:21 AM

Similar Messages

  • Design Infoobject with version maintenance

    Hi,
    We have a oralce as source system. A table material group with mat group id, version id and some other columns needs to be extracted to BW. For every material group, 4 version id's are maintained and for each version id a validity period and version number is mainatained in another table.
    To design this in BW, The infoobject material group was created with attribute Version id. This did not work as the mat group is not unique without version id. If  versionid is defined as compounding infoobject,  every version will be available in the report for eachmat group. The requirement is that the mat group in the report should show the current version being used with the quantities consumed/procured.
    Any ideas how to design this in BW.
    Thanks and Regards,
    Srinivas
    Edited by: Srinivas on Mar 18, 2011 6:47 AM

    load second table to a dso (version id, version n°, valid period)
    Create the infoobject with version id as compound. add a infoobject ZCURVERS as an attribute to your infoobject.
    when loading from the first table to your infoobject , read the dso date in a start routine, and with the help of the valid period, you can determine which version is the current one. if this is the case you put an X in ZCURVERS. So per material group, you'll have only one line where ZCURVERS = 'X'. Now in your report, you need to filter on ZCURVERS = 'X'.
    this should do the trick, however some remarks:
    - use semantic groups to have all lines of the same material group in the same pacakge
    - you need to do full loads
    M.

  • Component 0DAT (version A) does not exist in the database

    Dear experts
    i got this error.
    Component 0DAT (version A) does not exist in the database
    http://static.flickr.com/20/71394172_655d295b7f_o.jpg
    A SAP expert recommended
    "Use BC to activate the variable 0DAT from InfoObject 0CALDAY."
    but i can't find 0DAT.
    http://static.flickr.com/35/71390830_1049df5c3a_o.jpg
    my system is
    http://static.flickr.com/35/71390831_c837af0b47_o.jpg
    Thanks in advance
    David.kang
    Message was edited by: David Kang
    Message was edited by: David Kang

    Mentor Eugene,
    I guess the issues are related to "Sneak Preview version".
    well, instead of creating new 0DAT,
    i edited  the RSZGLOBV table with 0DAT that i created before.
    http://static.flickr.com/20/71437761_de16ddee16_o.jpg
    http://static.flickr.com/34/71437760_5236824cc2_o.jpg
    so two rows were changed. (from 6 to 4 ). 
    http://static.flickr.com/34/71437762_ed172b5577_o.jpg
    <b> What do you think it is okay ? </b>
    Finally, i can get rid of " Component 0DAT (version A) does not exist in the database " message.
    therefore i expect everything goes well.
    but ..
    "Information No texts were maintained in language E for variable 0DAT " comes up.
    Refer to the screenshot ( http://static.flickr.com/35/71439173_5c996d2111_o.jpg )
    [Query Designer screenshot ]
    http://static.flickr.com/34/71440191_b2a96a2ac4_o.jpg
    [Material Number Master Data ]
    http://static.flickr.com/34/71440190_a827c571ae_o.jpg
    [Original Data file ]
    http://safariexamples.informit.com/0201703661/IO_MAT_TEXT.csv
    http://safariexamples.informit.com/0201703661/IO_MAT_ATTR.csv
    mentor Eugene! thanks a lot.
    with kind regards
    David

  • Version 1 is not getting activated in PR and PO

    We are using release strategies for PR and PO, along with we have to activate Version Management, which we have already activated (Active Version and 0 Version).
    But now Version 1 is not getting activated in system only Version 0 is appearing in PR or PO, even after revoking PR or PO system is reflecting all the changes in Version 0. I have even taken print out of PO but new version couldnu2019t triggered. All the relevant fields have been mentioned in version relevant fields of PR.
    The entire required configuration has been done, I have gone through whole forum many members have encountered the same problem but solution is not provided to any one. Kindly suggest in this regard.
    Full points will be awarded.

    Amir Hassan wrote:
    We are using release strategies for PR and PO, along with we have to activate Version Management, which we have already activated (Active Version and 0 Version).
    >
    > But now Version 1 is not getting activated in system only Version 0 is appearing in PR or PO, even after revoking PR or PO system is reflecting all the changes in Version 0. I have even taken print out of PO but new version couldnu2019t triggered. All the relevant fields have been mentioned in version relevant fields of PR.
    >
    > The entire required configuration has been done, I have gone through whole forum many members have encountered the same problem but solution is not provided to any one. Kindly suggest in this regard.
    >
    > Full points will be awarded.
    Amir Hassan wrote:
    We are using release strategies for PR and PO, along with we have to activate Version Management, which we have already activated (Active Version and 0 Version).
    >
    > But now Version 1 is not getting activated in system only Version 0 is appearing in PR or PO, even after revoking PR or PO system is reflecting all the changes in Version 0. I have even taken print out of PO but new version couldnu2019t triggered. All the relevant fields have been mentioned in version relevant fields of PR.
    >
    > The entire required configuration has been done, I have gone through whole forum many members have encountered the same problem but solution is not provided to any one. Kindly suggest in this regard.
    >
    > Full points will be awarded.
    Amir Hassan wrote:
    We are using release strategies for PR and PO, along with we have to activate Version Management, which we have already activated (Active Version and 0 Version).
    >
    > But now Version 1 is not getting activated in system only Version 0 is appearing in PR or PO, even after revoking PR or PO system is reflecting all the changes in Version 0. I have even taken print out of PO but new version couldnu2019t triggered. All the relevant fields have been mentioned in version relevant fields of PR.
    >
    > The entire required configuration has been done, I have gone through whole forum many members have encountered the same problem but solution is not provided to any one. Kindly suggest in this regard.
    >
    > Full points will be awarded.
    Amir Hassan wrote:
    We are using release strategies for PR and PO, along with we have to activate Version Management, which we have already activated (Active Version and 0 Version).
    >
    > But now Version 1 is not getting activated in system only Version 0 is appearing in PR or PO, even after revoking PR or PO system is reflecting all the changes in Version 0. I have even taken print out of PO but new version couldnu2019t triggered. All the relevant fields have been mentioned in version relevant fields of PR.
    >
    > The entire required configuration has been done, I have gone through whole forum many members have encountered the same problem but solution is not provided to any one. Kindly suggest in this regard.
    >
    > Full points will be awarded.
    Amir Hassan wrote:
    We are using release strategies for PR and PO, along with we have to activate Version Management, which we have already activated (Active Version and 0 Version).
    >
    > But now Version 1 is not getting activated in system only Version 0 is appearing in PR or PO, even after revoking PR or PO system is reflecting all the changes in Version 0. I have even taken print out of PO but new version couldnu2019t triggered. All the relevant fields have been mentioned in version relevant fields of PR.
    >
    > The entire required configuration has been done, I have gone through whole forum many members have encountered the same problem but solution is not provided to any one. Kindly suggest in this regard.
    >
    > Full points will be awarded.
    Dear Amir,
    in pr version management , control data :select version active,version 0 ok, & external ok. &
    field selection : reason required,short text req., requester req., external number & posting date are optional & save.
    even with release strategy there is no problem
    create a pr & save it.After release it. change the pr
    after u canfind the versions 0 & 1.
    in po version management , doc.category f doc.type nb pur.org xxxx ,control data :select version active,version 0 ok, field selection : reason required,short text req., requester req., external number & posting date are optional & save.
    go to Set Up Change Displays as per standard nb is already there no need to change & category is blank
    in category u have to maintain f(is for po) & save it.
    create a po & save it.After release it. change the po
    after u canfind the versions 0 & 1.
    Regard's
    Raj.

  • Why will the new version of picasa not work on my imac

    Why will my upgraded version of picasa not work on my IMac???HELP
    It will start to load and then error message and cuts off. ( Picasa is photo editing software)

    Picasa is not an Apple product.
    You should ask the developers why they have not updated their application.

  • I've upgraded to 6.0.1 and now firefox no longer loades AT ALL. I get this XULRunner error: Platform version "5.0" not compatable with minVersion = 6.0.1 and maxVersion = 6.0.1. What can I do to get Firefox working again as my browser?

    After deleting everything, I've also tried to reload 3.6.12 fresh and I get a totally different nss3.dll entry point cannot be found error.

    Download a fresh Firefox copy and save the file to the desktop.
    * Firefox 6.0.x: http://www.mozilla.com/en-US/firefox/all.html
    * Uninstall your current Firefox version.
    * Do not remove personal data when you uninstall the current version.
    Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
    * It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
    Your bookmarks and other profile data are stored elsewhere in the Firefox Profile Folder and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.
    * http://kb.mozillazine.org/Profile_folder_-_Firefox
    * http://kb.mozillazine.org/Profile_backup

  • I have used Firefox on my computer for several years. Today, after upgrading to the new version, I was not able to open Firefox. I have tried several times uninstalling and re-downloading Firefox. It still will not open! What is wrong?

    I have used Firefox on my computer for several years. Today, after upgrading to the new version, I was not able to open Firefox. I have tried several times uninstalling and re-downloading Firefox. It still will not open! Is the new version not compatible with Windows Vista?

    I hope that link points to mozilla.com or mozilla.org
    You will have to close firefox.exe with the Windows Task Manager from the "Processes" tab of the WTM since you don't have a widow to close.
    The best way to close Firefox is through File > Exit, for those who stuck with the "Firefox" button click on the Firefox button then Exit. It is not perfect but it is a lot better than just closing the window with the "X" in the upper right corner

  • VERSION 0 IS NOT DEFINED FOR FISACL YEAR 2007,

    i am learning SAP PP and i hv ides 4.7,
    now WHEN SAVING ORDER i.e DURING COST CALCULATION I GET A MESSAGE THAT VERSION 0 IS NOT DEFINED FOR FISACL YEAR 2007,
    ON ANALYSING IT LEADS TO T.CODE OKEV BUT HERE SYSTEM DOES NOT PERMIT TO CHANGE THE VERSION, BUT IN ECC 5.0 IT ALLOWS ,
    WHAT IS THE PROBLEM, CAN ANY ONE PL. HELP ME,
    analysis of error gives following message:
    Activation of the indicator is not permitted
    Message no. KT253
    Diagnosis
    You activated an indicator (Plan, Actual, WIP/results analysis or Variance calculation ) in the basic settings for version 1 in controlling area 1000. However, a higher order of settings (general version definition) prevents you from setting this indicator in version 1.
    Note
    The following should be taken into account when maintaining a version:
    In general version definition you decide whether a version is allowed for
    •     Panning (with the Plan indicator)
    •     Actual data update (with the Actual indicator)
    Note: In Overhead Cost Controlling, actual data is updated in operational version 0.
    Actual versions different from 0 are found at present only for delta versions in Activity Based Costing (CO-ABC), and when you work with parallel assesment ( additional versions):
    •     A data version from results and WIP determination manages (indicator WIP)
    •     Another version from variance determination manages (indicator Variance)
    •     A version for exclusive use (field exclusive application)
    You must maintain the version basic settings for each controlling area in which you want to update transaction data. General version definition restricts the settings possible for the controlling area:
    •     If general version definition does not allow plan and/or actual data update for version, this applies to the version in all controlling areas. If plan and/or actual data updating is allowed for a version in general definition, this can be reset for each controlling area separately (unmark the plan or actual indicator).
    •     Delta versions in ABC may not be used for parallel valuations in the actual; the same goes for versions with exclusive applications. In both cases, the valuation fields may not be maintained.
    To set indicators WIP/Results- or Variance-determination the following conditions apply:
    •     Both indicators may be set only during setup for the controlling area, when they are already established in the higher level general version definition
    •     If either indicator is already active in the data bank, then the actual indicator may not be subsequently activated
    •     If the actual indicator is inactive and either of these indicators is active, then the valuations in the corresponding versions and in version "000" must agree
    •     If the actual indicator is active, then both indicators must be activated
    Versions 0 and 1 are used regularly for various purposes by the system, which sets the following limitations/restrictions:
    •     Version 0 must always be available. It cannot be used exclusively. The plan and actual indicators must always be active.
    •     The actual indicator may not be activated in version 1.
    If these conditions are violated during version maintenance, error messages are issued. There are three types of error message:
    1. While maintaining the general version definition, you can only make changes if they do not violate the conditions outlined above.
    2. While maintaining the basic settings in the controlling area, the entries must remain consistent with the higher level entries.
    3. You want to maintain version 0 or 1. The restrictions outlined above apply.
    Use the "Extras" menu option to display the structure of the entries in the complex data object version:
    •     Select a version and choose Extras -> Version use.
    The SAP System shows which controlling areas use this version.
    •     Select Extras -> Versions in CO area
    This displays all versions used in the current controlling area.
    The subordinate entries in the hierarchy (settings for each fiscal year, strategic Activity-Based Costing: transactions for a delta versions) will also be shown for both cases.
    Procedure
    Do not activate the indicator, or change the higher order of settings in the general version definition.

    Raj,
    What are you trying to change?
    To me you are not suppose to make any changes, you need to select the version "0" and then hit "Settings for each Fiscal year" subfolder.... here you copy the settings of 2006 and change the year to 2007. This should resolve the problem.
    Regards,
    Prasobh

  • Updated my iPhone 5 to ios7, in the App store after installing updates I now have a never ending list of the Apps I've updated.  How do I get rid of the list after they've been updated?  In the previous version I did not have an annoying permanent list.

    Updated my iPhone 5 to ios7, in the App store after installing updates I now have a never ending list of the Apps I've updated.  How do I get rid of the list after they've been updated?  In the previous version I did not have an annoying permanent list.

    iOS 7 allows you to have your apps update automatically. Therefore, the list of what has been updated stays so that you can see what was updated, when and what the release notes say. It has been suggested that they list has a limit, much like Recents. Currently, there is no way for the user to delete the entries manually. Just try not to look at them.

  • Chararacteristic 0CALQUARTER is available in version M but not in version D

    Dear Sirs
    I hope you're doing fine. While activating InfoCube 0PUR_C01 I get the following error:
    <i><b>RSAU709 : Chararacteristic 0CALQUARTER is available in version M but not in version D.</b></i>
    (Yes, the word <i>characteristic</i> is misspelled in the message text)
    There is no more detailed information so I'm stuck..Please help.
    With best regards
    Manuel<i></i><i></i>

    Try executing the function module RSDG_IOBC_REORG function module in transaction SE37 (F8 -> single test) with the following parameters:
    Function module              RSDG_IOBC_REORG
    Import parameter             Value
    I_OBJVERS                    A
    I_PROGRESS
    I_IOBJTP                    *
    I_ALL_IOBJ                   X
    I_T_IOBJNM                  0 entries
    I_BYPASS_BUFFER
    F8 -> Execute

  • I am using itunes version 9.its not updating..Pls help as how can i update my itunes to the latest version??????

    i am using itunes version 9.its not updating..Pls help as how can i update my itunes to the latest version??????

    See this for Windows... http://support.apple.com/kb/TS1538
    and this for Mac OS X... http://support.apple.com/kb/TS1591

  • My  iphone 3gs with version 4.0 not works for apple  TV should i need to download  any app or any other thng

    my  iphone 3gs with version 4.0 not works for apple  TV  what should  i do?

    Welcome to the Apple community.
    You should update your iPhone software.

  • Tried to download version 4, which replaced old 3.6, but I'm getting a message that version 4 will not work with Mac OS 10 (I have OS 10.4.11). How can I download previous Firefox version?

    Tried to download version 4, which replaced old 3.6, but I'm getting a message that version 4 will not work with Mac OS 10 (I have OS 10.4.11). How can I download previous Firefox version?

    You can download firefox 3.6.16 here: http://www.mozilla.com/en-US/firefox/all-older.html

  • Please Please help me. I have been trying to install Itunes 11 for 3 months. I deleted my old version and can not for the life of me get Itunes installed . I have Windows 7 Home. The message is " Could not open key: UNKNOWN\Components\DA42BC89BF25F5BDOAF1

    Please Please help me. I have been trying to install Itunes 11 for 3 months. I deleted my old version and can not for the life of me get Itunes installed . I have Windows 7 Home. The message is " Could not open key: UNKNOWN\Components\DA42BC89BF25F5BDOAF1

    Try the following user tip:
    "Could not open key: UNKNOWN\Components\[LongStringOfLettersAndNumbers]\[LongStringOfLettersAndNumbe rs]" error messages when installing iTunes for Windows

  • Version 6 will not open in Windows 7 on 32 bit PC

    I can operate Blackberry Desktop software version 5 without any difficulty but all attempts to install version 6 result in failure.
    Version 6 will not even open to run.
    Using a recent high spec PC running windows 7 pro and M'soft Office Outlook 2007.
    Please help!

    Thanks for the quick reply.
    Do you see the BlackBerry splash screen when you try to open the application?
    Follow the steps in this KB article to perform a clean uninstall of BlackBerry Desktop Software: www.blackberry.com/btsc/KB02206
    Once you complete all the steps, restart the computer and then attempt to install the software from www.blackberry.com/desktop.
    Let me know if you run into any trouble.
    -ViciousFerret
    Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
    Be sure to click Like! for those who have helped you.
    Click  Accept as Solution for posts that have solved your issue(s)!

Maybe you are looking for

  • How to chek the content type thru java script !!

    Hii Guys ,one more prb, I need to develop a file uploading utility in struts to upload ZIP files(only ZIP), and i sucseeded to do it using the commons.fileupload which comes along with the WSAD5.1(examples), but the prb is i need to chek for the MIME

  • Restore from Time Capsule problem

    I had to restore my system from my Time Capsule but it is not working. Help needed. Macbook Pro 15/2.2GHz/2x1G/160GB/SD/MDM Installed OS X 10.6.7 update 5/7/11 but after that many apps started to crash on launch. Attempoed restore from Time Capsule u

  • I can only view the first page or few songs in the store on my ipad.

    I can't see more than the first 6 top chart songs, or 12 of 62 albums etc.  What an I doing wrong?

  • Duplex backup: getting one copy to complete

    Using Oracle 10g R2. I am trying to set up a tape backup with 2 copies in a highly available environment. The media management software (IBM TDP for Oracle) is configured so that the copies are written to separate tape libraries. If one of the librar

  • ExportCollectionActionListener dropping leading zeroes

    We use <af:exportCollectionActionListener> tag to provide users with the ability to export data from some <af:table>s to MS Excel. We have problems with data values like "01.21", for example, which are converted by Excel to "January, 21". Also when t