Infoobject Characterisitc created with the option of BW Application

Hello,
We have created Characteristics with the option of SAP BW as the application [and not as SAP APO].
We have used some of the characteristics as navigational attributes. subsequently, we have loaded and activated the master data for the main characteristics.
We have been able to successfully load the InfoCube [with the navigational attributes activated in the cube].
We have used the same characteristics in the MPOS and generated the CVCs from the InfoCube.
But when we try to load the data in the Planning area [linked to the above mentioned MPOS], we get an error message "Characteristics mapping: No data copied
Message no. /SAPAPO/MSDP_REL120"
Could you please let us know what possibly the reason could be for this?
We suspect the reason to be the way the Characteristics have been defined.
Regards,
Sandeep Deolekar

Sandeep
I have seen this problem if you have 0CALDAYS defined in your time buckets profile, there is a program correction see SAP Note 774555 for the correction instructions:
Symptom
You are using transaction /SAPAPO/TSCUBE to load data from an InfoCube to a planning area. If the planning data is located in the InfoCube for exact days (InfoObject 0CALDAY exists in the InfoCube), no planning data is transferred.
In the log, the warning "Characteristic assignment: No data was copied."
Other terms
/SAPAPO/TSCUBE /SAPAPO/MSDP_REL120
Reason and Prerequisites
This is caused by a program error.
Solution
SCM Release 4.1: The source code corrections can be implemented automatically using SNOTE before Support Package 4 is implemented.
This is applicable for SCM4.1
Hope this helps
Regards
Ian

Similar Messages

  • When I attempt to send a text from the new iPad, a dialog box appears with the option to either sign in with Apple ID Password or Create New Account. I try signing in using my Apple ID password but IMessage informs me that email address cannot be verified

    When I attempt to send a text from the new iPad, a dialog box appears with the option to either sign in with Apple ID Password or Create New Account. I try signing in using my Apple ID password but IMessage informs me that email address cannot be verified because it is already in use ??? What am I doing wrong?

    settings -> iTunes & App Store
    click on apple ID listed there
    select Sign Out
    sign in with the proper account
    from then on, when the store ask for your password it should be with the correct ID

  • After a library has been created with the "Copy items to the iPhoto library" option unselected, can it later be made to create those copies?

    iPhoto 9.4.3
    iPhoto Library Manager 3.6.8
    MacBook Pro - OS X 10.7.5.
    I have a large number of iPhoto libraries, organized with iPhoto Library Manager, that I created with the "Copy items to the iPhoto library" option unselected because I wanted easier access to the individual files. I am now going to be migrating to a new computer and have run into some problems with iPhoto losing the path to the file, and as a result showing me the exclamation point of doom. What's more, the program doesn't seem very intelligent about rebuilding those lost connections, and I have to go back through and correct it manually almost one at a time. How do I get around this problem?
    If I rebuild my new computer from a Time Machine backup (I usually enjoy taking this opportunity to start from a clean slate, but...), will the paths all be preserved without me needing to abandon my organization system?
    Or is there some way to ask iPhoto or Library Manager to create and organize copies of all the photos in the library that are not currently present within the library?
    On a tangentially related note, what's the best way to save keywords (and ideally also faces) added in iPhoto to the photos' meta data?
    Much obliged.

    Not with iPhoto by itself.  If you have the lastest version of Aperture and iPhoto referenced libraries can be converted to managed with Aperture.
    You can convert to a managed library with  iPhoto Library Manager by rebuilding the library with iPLM.  This will create a new, managed library with all your photos in it and with all Events, albums, keywords, titles, descriptions and places intact. However, books, calendars, slideshows and cards will not be retained.  They will end up as albums containing the photos.
    OT

  • What is the user scope when created with the API?

    I noticed that users created with the Adobe Connect API for my meeting/account are always listed in the Administration -> Users and Groups area.  Which probably means that a user's login is only valid for my meetings.  So if they wanted to register or join a meeting controlled by someone else, they would have to re-register or be re-created by that admin.  Is this correct?
    I'm trying to confirm this so that I know how to register a user on my website.  It would be ideal if my website would register the user and also log the user in without the user having to enter a separate password (my website would generate and store the password).  If the API creates a user only for my meetings then this is not a problem.  The user will just always have to go through my website to get to the meeting.  However, if the user created by my Adobe API account can be used to access/register in another person's meetings on Adobe then this approach is not so good because the user would need to know their password.

    yea, guest registration is not an option as I need to restrict access to the meeting.
    My main concern is that another Connect account holder can change the user's password.  If this ever happens, my website would have an old password and would be broken because it wouldn't be able to log the user into their meeting.  This may be a rare case, but the website will be charging for these meetings/webinars.  If the user can't get in at the time of the meeting....  i'll have a lot more problems.
    I guess I'll just need to provide a way for the user to change or enter their own password. 
    Thanks for the info!

  • My macbook started crashing on startup. The startup tone wavers. I got it going with the option start keystroke. Is this apt to be software or hardware? I ordered new system software to see if a new install will solve.

    My macbook started crashing on startup. The startup tone wavers. I got it going with the option start keystroke. Is this apt to be software or hardware? I ordered new system software to see if a new install will solve.

    when you install the disc, do it with the machine powered off. Place the disc in the the slot, push it in while holding the power switch tp poer it up, while holding the "C" key down till the gear starts spinning. After the gear starts spinning you can release the C key and wait. This takes much longer than normal longer, then create a new account. Be ready to wait.
    USE YOUR ORIGINAL INSTALL DISC!

  • HT2513 my iCal calendar that I created with the color green keeps changing to purple.  no matter how many times I change it to green, it turns it back to purple.  Of course this only happens with iCloud and not "from my Mac".  Any ideas?

    my iCal calendar that I created with the color green keeps changing to purple.  no matter how many times I change it to green, it turns it back to purple.  Of course this only happens with iCloud and not "from my Mac".  Any ideas on how to correct this?  This seems like a trivial error, but it's super annoying.

    I called Apple and they said that they know about this problem.  It's a problem with iCloud which their Engineers know about.  (there was a new iCloud release, hence...)  No ETA for a fix yet.  I asked that this be escalated so Engineering doesn't put it at the bottom of their fix list.  I talked to a Senior Advisor and mentioned to them to have QA check their regression tests as this has happened before to me (the problem just didn't take this long to resolve).  I like to use green too for important stuff, so I've resorted to creating a new calendar using the normal calendar green for events going forward.  They could have picked another color besides green to have this problem with and I wouldn't have been so upset.  ;-)

  • HT204053 I need to use an existing ID (email address) on a new iPhone. It tells me "choose another ID - that one is in use," with the option to "use existing ID," however, it is an endless loop, referring me only to change my password on the existing ID.

    I need to use an existing ID (email address) on a new iPhone. It tells me "choose another ID - that one is in use," with the option to "use existing ID," however, it is an endless loop, referring me only to change my password on the existing ID.
    How do I enable my new device with an existing ID - I do not need to change the password for the millionth time!
    None of the FAQs (or the Community choices below) address new devices, they are all about APPS and iCloud stuff.

    If it is an existing iCloud ID, you should be able to just go to Settings>iCloud and sign in with it.

  • Issues with the SQL wrapper scripts created with the DB adapter

    Hi All,
    We have the wrapper sql scripts created with the DB adapter configurations which are being used to invoke the stored procedures.
    To give you a background on the wrapper sql scripts-The Adapter Configuration wizard generates a wrapper API when a PL/SQL API has arguments of data types, such as PL/SQL Boolean, PL/SQL Table, or PL/SQL Record.
    These two SQL files are saved in the same directory where the WSDL and XSD files are stored, and are available in the Project view.
    The issue we are facing now is that whenever the associated package or the procedure structure undergoes a change we see an error as given below:
    An unhandled exception has been thrown in the ESB system. The exception reported is: "org.collaxa.thirdparty.apache.wsif.WSIFException: esb:///ESB_Projects/Application1_ABC_ESB/DBADP_Update_Out.wsdl [ DBADP_Update_Out_ptt::DBADP_Update_Out(InputParameters,OutputParameters) ] - WSIF JCA Execute of operation 'DBADP_Update_Out' failed due to: Error while trying to prepare and execute an API. An error occurred while preparing and executing the APPS.XXIRIS_SOA_R_WRAPPER.XXIRIS_AR_CUST_K$ API. Cause: java.sql.SQLException: ORA-04068: existing state of packages has been discarded ORA-04061: existing state of package body "APPS.XXIRIS_AR_CUST_K" has been invalidated ORA-04065: not executed, altered or dropped package body "APPS.XXIRIS_AR_CUST_K" ORA-06508: PL/SQL: could not find program unit being called: "APPS.XXIRIS_AR_CUST_K" ORA-06512: at "APPS.XXIRIS_SOA_R_WRAPPER", line 1 ORA-06512: at line 1 [Caused by: ORA-04068: existing state of packages has been discarded ORA-04061: existing state of package body
    In such cases we need to either execute the wrapper scripts again or refresh the connection pool in case the wrapper sql scripts for that procedure are not available.
    In some cases we see that the first instance errors out.However the second request and the subsequent requests after that goes through successfully.
    Please do let me know if anyone has faced such issues before.
    Any inputs in this regard would be of great help.
    Thanks in advance!
    Deepthi                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                           

    I stumbled on a link in the oracle forum which says that the "create or replace package XXX" at the start of the PL/SQL procedure when run seems to intermittently cause the ORA-04068: existing state of packages has been discarded problem.
    As per the solution suggested an “alter package XXX compile" can be executed after the changes are made and then we would no longer get the error in BPEL/ESB and dont have to bounce the server too.
    __http://forums.oracle.com/forums/thread.jspa?threadID=185762_
    However the above solution does not seem to resolve the issue.
    Any help in this regard would be highly appreciated.
    Thanks,
    Deepthi

  • Everytime I connect to iTunes the message ' iTunes was interrupted while restoring the contents of the iPhone. would you like to restore the phone again now? With the options cancel, continue restore and delete back-up??

    I upgraded to iOS 5 on my 3GS without any issues but now everytime I connect to iTunes the message ' iTunes was interrupted while restoring the contents of the iPhone. would you like to restore the phone again now? with the options of cancel, continue restore and delete back-up. what happens if i click delete back up?

    I'm not getting the message anymore!
    What I did:
    1.- Went to preferences in itunes/ Devices --> erased the corrupted backup (there were two backups)
    2.- Upgraded to iOS 5.0.1
    Done!
    PS: Maybe upgrading solves the problem without erasing the corrupted backup

  • How do I resolve this error message? The iPhoto library is on a locked volume.  Reopen iPhoto when you have read/write access, or reopen iPhoto with the Option key held down to choose another library.

    How do I resolve this error message? The iPhoto library is on a locked volume.  Reopen iPhoto when you have read/write access, or reopen iPhoto with the Option key held down to choose another library.

    Hi j,
    I don't know if this will work, but I'd try logging in to an admin account, going to your main library (not user library), opening it, opening Application Support, selecting iPhoto, hold down the command key and press i, click on the lock in the lower left, entering the password and making sure you have Read & Write privileges for System and Admin.

  • System no longer does session restore but when trying to configure, it does not provide me with the option to show windows and tabs from last session

    Before I updated the latest version of Firefox, every time the browser shuts down in error, I would get the System Restore feature which was really nice. Now, this no longer happens and when I went to configure this ability, it does not even provide me with the option to select to show windows and tabs from the last session. How can I get the restore session feature working again?

    Make sure that you do not run Firefox in permanent Private Browsing mode.
    *https://support.mozilla.com/kb/Private+Browsing
    *You enter Private Browsing mode if you select: Tools > Options > Privacy > History: Firefox will: "Never Remember History"
    *To see all History and Cookie settings, choose: Tools > Options > Privacy, choose the setting <b>Firefox will: Use custom settings for history</b>
    * Deselect: [ ] "Permanent Private Browsing mode"
    * http://kb.mozillazine.org/Session_Restore
    * https://support.mozilla.com/kb/Session+Restore

  • After Mavericks OS upgrade, can no longer make any HTTP requests with the OPTIONS verb

    My machine can no longer make any HTTP requests with the OPTIONS verb. This happens whether I try it curl, postman, or ajax.
    curl -i -X OPTIONS http://www.google.com returns curl: (52) Empty reply from server
    It should return a long string containing a 405 error code.
    I suspect that this is related to the Mavericks upgrade I did earlier this week. I only have one mac (my dev machine) with Mavericks. Other macs are Mountain Lion and they don't have this problem.
    Can anyone else with Mavericks confirm whether or not they have this problem too?
    If this is Mavericks related, anyone know of a fix or workaround?

    Turns out that it wasn't Mavericks related at all. Cisco AnyConnect has a security module running behind the scenes even when you're not VPNed into anything. It was blocking my OPTIONS verb requests. I was able to make these calls after uninstalling.
    Re-installing with Web Security turned off should prevent it from happening. While I was uninstalling I did notice that there was a web security uninstall script in /opt/cisco/vpn/bin but I already committed to taking the whole app off my machine. Simply running that script could have done it too.
    I must give credit to Ben Nadel. It was his blog post that helped me fix this issue.
    http://www.bennadel.com/blog/2559-Cisco-AnyConnect-VPN-Client-May-Block-CORS-AJA X-OPTIONS-Requests.htm?&_=0.10495476494543254#comments_44093

  • TS3297 I i downlaoded flashcards + with the top in app purchase of "US english female" for 1.99 and it shows the purchase with the option to download it for free then it comes back "Failure ?! Receipt verification failed !

    I downloaded flashcards + with the top in app purchase of " US english female" for 1.99 and it shows the purchase with the option to download it again for free then it comes back "Failure ?! Receipt verification failed !  I have deleted the app and reinstalled several times and it still does not work !!!!I have a iphone 4s with the 5.1.1. Thanks

    Lots of people having this problem.  Flash card+ says this is due to a change in the Apple processes receipts...  See posts on their facebook page.  https://www.facebook.com/flashcardsplus/timeline?filter=2

  • Everytime i link my iphone up to my laptop the message 'welcome to your new iphone' with the option restore from back up or new iphone. i once did restore from back up and it deleted all my recent pictures, music etc. how can i get pass this stage?

    everytime i link my iphone up to my laptop the message 'welcome to your new iphone' with the option restore from back up or new iphone. i once did restore from back up and it deleted all my recent pictures, music etc. how can i get pass this stage?

    Hi Khuram1981 - thank you thank you thank you!  All sorted!  dont suppose you know how to fix another problem I have??? for weeks now, since updating to ios5 I think, for some reason every time I have tried to log onto app store it says CANNOT CONNECT TO ITUNES STORE.  It's nothing to do with my computer, and I've been to the Geniius bar but they couldnt help and nothing I seem to do lets me update my Apps and even worse, I cant even buy any more.  Any suggestions?
    Again thank you SO much for helping with other problem = a real relief.
    Chatterwind xx

  • The iPhoto library is a Time Machine backup, and so cannot be used as the main library. Reopen iPhoto with the Option key held down to choose another library.

    I recently tried to look up my pictures on my time machine back up on an external hard drive. As soon as I try to open it I get the following message.
    "The iPhoto library is a Time Machine backup, and so cannot be used as the main library. Reopen iPhoto with the Option key held down to choose another library."
    I have tried holding down the option key but still couldn't few the photos.
    I want to know if there is anyway I can actually view these photos. I have over 85gbs of photos on the hard drive.  I have tried googling and looking at pervious forums with the same problem but nothing is working.
    Please help!

    Select Mac Help from the Finder's Help menu. Search for "Restore items backed up with Time Machine."

Maybe you are looking for

  • ITunes Not popping up

    I just downloaded iTunes from the website, and I even have a friend that has the update saoftware. I tried both, but my iTunes wont open, even with an error message. It's beginning to bug me, since I wish to change many of the songs on my iPod, but I

  • How to open .ai file with layers intact?

    Is there a way to open an .ai file inside of Photoshop CS4 with all its  layers sitll intact? If so, how?

  • Starting a server with urban terror 4.1 and it just hangs

    yeah, I'm trying to experiment with hosting a server with urban terror 4.1. I go through the trouble of setting up the server with my desired settings and when i hit the start server button, it closes and hangs with 100% cpu utilization. could it be

  • Accessing an MBean Programmatically

    Hi can anybody tell me how access an mbean by a sample program . For example in case of jboss , the jboss-service.xml contains an entry like the following... <mbean code="org.jboss.jmx.adaptor.rmi.RMIAdaptorService"      name="jboss.jmx:type=Connecto

  • Trouble transferring downloaded music to my

    Hi everyone! I can't get my music from Limewire onto my Zen Touch, even though it's in mp3 format. When I choose the folder and then click on the button to have it transferred to Creative Media Source, nothing happens. What's the deal?