InfoObject does not contain alpha conforming 1

I am getting the above error message when trying to load text. I found on several posts that I should change the Conversion column of the Transfer Rules. But I am trying to determine why this is happening because when I run these loads in the DEV box, they run fine. I transport the rules to our QA box, and that is when I have the trouble loading and get the error. I check the data in RSA3 and there is no difference, so it can't be data related.
If the data is the same, and the rules are the same, what could cause it to work in one box and not the other?
Thanks, Keith j

Hi Keith,
do you know the source table for the data? Please check that if possible via se16. Sometimes, specially with alpha conversion, even a 0001 from database is displayed as 1 and may lead you to the wrong way. If all settings are the same in your systems it surely must depend on the data itself. May be the better way analyzing the data from the source table is se17.
kind regards
Siggi

Similar Messages

Error: InfoObject does not contain alpha-conforming value 20030729

Hi everyone,
I got this problem, that i tried to fix yesterday, but all i did was that i got realy frustrated...
I created an infoobject which is copy of 0DOC_NUMBER and has alpha coversion routine.
Mapping field in DataSource is also type character 10(VBELN) as my infoobject.
But there are some values in this field that i am trying to load, less then 10 characters long (20030729,20051116...) and shouldn't be there, because the values are dates and not document numbers.
But anyway on R/3 side this values are in field which is defined as character 10 (VBELN), and when I am trying to load Infopackage(17500 records) I get 52 errors: InfoObject does not contain alpha-conforming value 20030729.
I don't get it, since both fields are type character 10 and the values are only digits, why do I get this error message and how can I fix it?
PS:One solution is to remove alpha conversion routine from infoobject, but i don't want that.
Regards,
Uro

hi,
sorry... correction, it's 'Exclusive attributes' that cannot be used for navigational attribute, you can set lower case to differentiate ... check the impact of lower case setting here ...
http://help.sap.com/saphelp_bw33/helpdata/en/b7/f470375fbf307ee10000009b38f8cf/frameset.htm
Lowercase letters allowed / not allowed
If this indicator is set, the system differentiates between lowercase letters and capital letters when you use a screen template to input values. If this indicator is not set, the system converts all the letters into capital letters when you use a screen template to input values.
If you choose to allow the use of lowercase letters, you must be aware of what happens when you input variables:
If you want to use the characteristic in variables, the system is only able to find the values for the characteristic if the lowercase letters and the capital letters are typed in accurately on the input screen for variables. If, on the other hand, you do not allow the use of lowercase letters, any characters that you type onto the input screen, are converted automatically into capital letters.
Exclusive attributes:
If you select Exclusively Attributes, the created characteristic can be used only as a display attribute for another characteristic, and not as a dedicated characteristic in the InfoCube. Furthermore, you then cannot transfer the characteristic into InfoCubes. However, you can use it in ODS objects or InfoSets.

Load ODS - InfoObject: InfoObject does not contain alpa-conforming value

Hello everybody,
I get following error while uploading from ODS to InfoObject.
InfoObject /BIC/ZHOUSENUM does not contain alpa-conforming value 0000000000000000004.
The data flow is as follows: Transactional InfoSource -> ODS -> InfoObject.
In the Transfer Rules before ODS I have marked the Conversion check box. The data is populated into ODS without any problems.
I can even activate the ODS, which reporting enabled.
When I browse the ODS table with the option check conversion exits unmarked, I can see the value '0000000000000000004'.
But the upload into InfoObject master data failes
Any help appreciated.
TIA
pawel

sap_all onboard.
I assume, this infosource is locked, due to the fact it was system generated.
On the other hand, there is a s-note 559763 which says:
If an InfoObject is filled with ALPHA exits from an R/3 System, the BW assumes that the data is to arrive in the internal ALPHA format and therefore does not convert the data.
I know, it is about R/3 as source system, but I assume the same would be for BW.
p.

Infopack Error ( does not contain alpha conforming value 10)

When I try to run my infopack which pulla data from BW into APO, the data load fails with the error below:
"InfoObject /BIC/XXXX does not contain alpa-conforming value 10" when I click on the details icon, I get the following description.
Can somebody please throw some light on this as I am new to DP/BW. Appreciate your help if someone can help me with fixing this problem.
                                                                                Diagnosis
The system checked whether the loaded InfoObject value conforms to the
     conversion exit.The check failed.
For example:
The value '1' was loaded into an InfoObject with alpha exit, even though
     the value '0000000001' was expected.
System response
The load process has failed or the erroneous records are displayed in
     the monitor. This does not depend on how error handling is set up.
Procedure
Find out why the data does not conform to the conversion exit, and, if
     possible, correct the cause. Possible causes are errors in Business
     Content or an error in a customer exit in the source system.
If you cannot correct the problem, you have the option of removing the
     conversion exit on the InfoObject. However, since the system has already
     been converted, duplicates appear in the system again.
Thanks
Varun

Hello Varun,
BW expects your Key Figures to be stored in "alpha conforming format". This is can be roughly described as having 0s in front. For example, if your key figure value is 10, then the alpha conforming value of that is 000000000000000010 (assuming the number of chars in your KF is 18).
To correct the error do the following:
In your transfer rule in BW for InfoObject /BIC/XXXX, implement an ABAP routine that calls function module CONVERSION_EXIT_ALPHA_INPUT. Here an example of the ABAP code you should put in your transfer rule for /BIC/XXXX:
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
    input         = TRAN_STRUCTURE-/bic/xxxx
IMPORTING
   OUTPUT        = RESULT.
Hope this helps. Please post again if you have questions.

InfoObject does not contain alpha confirming values

Hi ,
I am trying to load data into the object called ZAML_CODE, the type is CHAR and Length is 3.
The characteristic is enabled with ALPHA - Conversion exit.
we are loading data to this object since 3 years successfully.
But now only it is saying that InfoObject ZAML_CODE does not contain alpha confirming values.
Especially we are getting error for numeric values like 1, 2,3 etc only.
Previously numeric values were also loaded successfully.
Now the source system is ECC6.0, previously it was 4.6C. This is the only difference.
Please respond with your suggesions.
Regards
Srinivas

Hello,
Just check if there is space in the front of these numeric values or some garbage value...if there is... then it may not be able to pad it up with zero and hence the issue...check in R/3 about how these values are stored...you can remove the space from the front and change it in PSA...and then load but first do the analysis of the source system and see why its coming up wrong.
Regards
Ajeeet

InfoObject REQUESTER does not contain alpa-conforming value 1006152

Hello All,
I am trying to load data into ODS.
The load is failing at "Data Package 6" Record # 11140. I am getting following message at the failed record. -
"InfoObject REQUESTER does not contain alpa-conforming value 1006152".
I went ahead and checked this record # 11140, in PSA, in Package # 6. There the requester field is populated with "1006152" where it is expecting "Some description".
I went ahead and changed the START_ROUTINE. with
LOOP AT DATA_PACKAGE.
IF NOT DATA_PACKAGE-REQUESTER cs 'S'.
DELETE DATA_PACKAGE.
ENDIF.
ENDLOOP.
Expecting that these erroneous records will be removed and will get a successful load.
I am getting the same error message at the same record # and data-package number.
Any help is highly appreciated.
Thanks,
PK.

Hi
when u r having such a problem of Alpha numerical error in a particular for a particular record.Then u just write a Fomula into that Particular formula USE {TOUPPERCASE(REQUESTER)} & thenn reload to the Target...this will solve the problem...to my knowledge..
try this..
HOPE THIS HELPS
THNX
BI Learner.

InfoObject FORWAGENT does not contain alpa-conforming value 100.........

HI ALL,
Can someone through some light on resolving the issue
"InfoObject FORWAGENT does not contain alpa-conforming value 100............"
In "Details Tab" of the monitor screen
Requests (messages): Everything OK
Extraction (messages): Errors occurred --> data selection ended succesfully
T ransfer (IDocs and TRFC): Errors occurred -->some of the data packets not yet processed
Processing (data packet): Errors occurred --> while processing transaction data
InfoObject FORWAGENT does not contain alpa-conforming value 100............"
error occured
Please advice how to solve
Thanking you in advance,
Rase

Hi,
Use ALPHA conversion in the general tab of the infoobject FORWAGENT.
then load the data again.
also in the transfer strcture in the right most side tick the option " alpha....."
Thanks

Stack file that is generated does not contain any java components

We are in process of upgrading our ecc6.0 system with ehp4. The enhancement is stuck up in configuration phase for JAVA. Though we have configured Java in solution manager the stack file that is generated does not contain any java components and so the installation is stuck up. Kindly request you to advice us on this issue .
Attached is the 'Trouble Ticket Report', PREPARE_JSPM_QUEUE_CSZ_01.LOG, and SMSDXML_EA4_20100623144541.375.txt
++++
Trouble Ticket Report
Installation of enhancement package 1 for SAP NetWeaver 7.0
SID................: EA4
Hostname...........: wipro
Install directory..: e:/usr/sap/EA4
Upgrade directory..: F:\EHPI\java
Database...........: Oracle
Operating System...: NT
JDK version........: 1.6.0_07 SAP AG
SAPJup version.....: 3.4.29
Source release.....: 700
Target release.....: 700
Start release SP...: $(/J2EE/StandardSystem/SPLevel)
Target release SP..: $(/J2EE/ShadowSystem/SPLevel)
Current usages.....:
ABAP stack present.: true
The execution of PREPARE/INIT/PREPARE_JSPM_QUEUE ended in error.
The stack E:\usr\sap\trans\EPS\SMSDXML_EA4_20100625054857.968.xml contains no components for this system.
More information can be found in the log file F:\EHPI\java\log\PREPARE_JSPM_QUEUE_CSZ_02.LOG.
Use the information provided to trouble-shoot the problem. There might be an OSS note providing a solution to this problem. Search for OSS notes with the following search terms:
com.sap.sdt.j2ee.phases.PhaseTypePrepareJSPMQueue
com.sap.sdt.ucp.phases.PhaseException
The stack E:\usr\sap\trans\EPS\SMSDXML_EA4_20100625054857.968.xml contains no components for this system.
PREPARE_JSPM_QUEUE
INIT
NetWeaver Enhancement Package Installation
SAPJup
Java Enhancement Package Installation
++++++
PREPARE_JSPM_QUEUE_CSZ_01.LOG>>
<!LOGHEADER[START]/>
<!HELP[Manual modification of the header may cause parsing problem!]/>
<!LOGGINGVERSION[2.0.7.1006]/>
<!NAME[F:\EHPI\java\log\PREPARE_JSPM_QUEUE_CSZ_01.LOG]/>
<!PATTERN[PREPARE_JSPM_QUEUE_CSZ_01.LOG]/>
<!FORMATTER[com.sap.tc.logging.TraceFormatter(%d [%s]: %-100l [%t]: %m)]/>
<!ENCODING[UTF8]/>
<!LOGHEADER[END]/>
Jun 28, 2010 9:21:23 AM [Info]:                      com.sap.sdt.ucp.phases.AbstractPhaseType.initialize(AbstractPhaseType.java:754) [Thread[main,5,main]]: Phase PREPARE/INIT/PREPARE_JSPM_QUEUE has been started.
Jun 28, 2010 9:21:23 AM [Info]:                      com.sap.sdt.ucp.phases.AbstractPhaseType.initialize(AbstractPhaseType.java:755) [Thread[main,5,main]]: Phase type is com.sap.sdt.j2ee.phases.PhaseTypePrepareJSPMQueue.
Jun 28, 2010 9:21:23 AM [Info]:                   com.sap.sdt.ucp.phases.AbstractPhaseType.logParameters(AbstractPhaseType.java:409) [Thread[main,5,main]]:   Parameter inputFile=EHPComponents.xml
Jun 28, 2010 9:21:23 AM [Info]: com.sap.sdt.j2ee.phases.jspm.JSPMQueuePreparatorFactory.createJSPMQueuePreparator(JSPMQueuePreparatorFactory.java:93) [Thread[main,5,main]]: Creating JSPM SP Stack queue preparator.
Jun 28, 2010 9:21:24 AM [Info]: com.sap.sdt.ucp.dialog.elim.DialogEliminatorContainer.canBeOmitted(DialogEliminatorContainer.java:96) [Thread[main,5,main]]: Dialog eliminator spStackDialogEliminator allows to omit dialog SPStackLocationDialog
Jun 28, 2010 9:21:24 AM [Info]:                  com.sap.sdt.util.validate.ValidationProcessor.validate(ValidationProcessor.java:97) [Thread[main,5,main]]: Validatable parameter SP/STACK/LOCATION has been validated by validator RequiredFields.
Jun 28, 2010 9:21:24 AM [Info]:                  com.sap.sdt.util.validate.ValidationProcessor.validate(ValidationProcessor.java:97) [Thread[main,5,main]]: Validatable parameter SP/STACK/LOCATION has been validated by validator SPStackLocationValidator.
Jun 28, 2010 9:21:24 AM [Info]: com.sap.sdt.j2ee.phases.jspm.JSPMSpStackQueuePreparator.createQueue(JSPMSpStackQueuePreparator.java:107) [Thread[main,5,main]]: Using SP Stack E:\usr\sap\trans\EPS\SMSDXML_EA4_20100625054857.968.xml.
Jun 28, 2010 9:21:24 AM [Info]:                   com.sap.sdt.j2ee.tools.spxmlparser.SPXmlParser.parseStackTag(SPXmlParser.java:488) [Thread[main,5,main]]: STACK-SHORT-NAME tag is missing. The CAPTION of the stack will be used as stack name.
Jun 28, 2010 9:21:24 AM [Info]:                   com.sap.sdt.j2ee.tools.spxmlparser.SPXmlParser.parseStackTag(SPXmlParser.java:582) [Thread[main,5,main]]: PRODUCT-PPMS-NAME tag is missing. The CAPTION of the product will be used as product PPMS name.
Jun 28, 2010 9:21:24 AM [Info]:                      com.sap.sdt.j2ee.tools.spxmlparser.SPXmlParser.parseSPXml(SPXmlParser.java:424) [Thread[main,5,main]]: Parsing of stack definition file E:\usr\sap\trans\EPS\SMSDXML_EA4_20100625054857.968.xml has finished.
Jun 28, 2010 9:21:24 AM [Error]:                       com.sap.sdt.ucp.phases.AbstractPhaseType.doExecute(AbstractPhaseType.java:863) [Thread[main,5,main]]: Exception has occurred during the execution of the phase.
Jun 28, 2010 9:21:24 AM [Error]: com.sap.sdt.j2ee.phases.jspm.JSPMSpStackQueuePreparator.createQueue(JSPMSpStackQueuePreparator.java:136) [Thread[main,5,main]]: The stack E:\usr\sap\trans\EPS\SMSDXML_EA4_20100625054857.968.xml contains no components for this system.
Jun 28, 2010 9:21:24 AM [Info]:                         com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:906) [Thread[main,5,main]]: Phase PREPARE/INIT/PREPARE_JSPM_QUEUE has been completed.
Jun 28, 2010 9:21:24 AM [Info]:                         com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:907) [Thread[main,5,main]]: Start time: 2010/06/28 09:21:23.
Jun 28, 2010 9:21:24 AM [Info]:                         com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:909) [Thread[main,5,main]]: End time: 2010/06/28 09:21:24.
Jun 28, 2010 9:21:24 AM [Info]:                         com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:910) [Thread[main,5,main]]: Duration: 0:00:00.781.
Jun 28, 2010 9:21:24 AM [Info]:                         com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:911) [Thread[main,5,main]]: Phase status is error.
++++++++++++++++++++++
[stack xml data: version=1.0]
[SPAM_CVERS]
ST-PI                         2005_1_7000006
LSOFE                         600       0015
SAP_AP                        700       0015
SAP_BASIS                     701       0003
SAP_ABA                       701       0003
SAP_BW                        701       0003
PI_BASIS                      701       0003
PLMWUI                        700       0002
SAP_APPL                      604       0002
EA-APPL                       604       0002
SAP_BS_FND                    701       0002
EA-IPPE                       404       0002
WEBCUIF                       700       0002
INSURANCE                     604       0002
FI-CA                         604       0002
ERECRUIT                      604       0002
ECC-DIMP                      604       0002
EA-DFPS                       604       0002
IS-UT                         604       0002
IS-H                          604       0003
EA-RETAIL                     604       0002
EA-FINSERV                    604       0002
IS-OIL                        604       0002
IS-PRA                        604       0002
IS-M                          604       0002
SEM-BW                        604       0002
FINBASIS                      604       0002
FI-CAX                        604       0002
EA-GLTRADE                    604       0002
IS-CWM                        604       0002
EA-PS                         604       0002
IS-PS-CA                      604       0002
EA-HR                         604       0005
SAP_HR                        604       0005
ECC-SE                        604       0002
[PRDVERS]
01200314690900000432SAP ERP ENHANCE PACKAGE       EHP2 FOR SAP ERP 6.0          sap.com                       EHP2 FOR SAP ERP 6.0                                                    -00000000000000
01200314690900000463SAP ERP ENHANCE PACKAGE       EHP4 FOR SAP ERP 6.0          sap.com                       EHP4 FOR SAP ERP 6.0                                                    -00000000000000
01200615320900001296                                                            sap.com                                                                                +00000000000000
01200615320900001469SAP ERP ENHANCE PACKAGE       EHP3 FOR SAP ERP 6.0          sap.com                       EHP3 FOR SAP ERP 6.0                                                    -00000000000000
01200615320900003195EHP4 FOR SAP ERP 6.0_NW701    EHP4 FOR ERP 6.0_NW701        sap.com                       EHP4 FOR SAP ERP 6.0 / NW7.01                                           +00000000000000
[SWFEATURE]
1                   01200615320900001296SAP ERP                       2005                          sap.com                       SAP ERP 6.0: SAP ECC Server
19                  01200615320900003195EHP4 FOR SAP ERP 6.0_NW701    EHP4 FOR ERP 6.0_NW701        sap.com                       EHP4 FOR SAP ERP 6.0 / NW7.01: Discrete Ind. & Mill Products
20                  01200615320900003195EHP4 FOR SAP ERP 6.0_NW701    EHP4 FOR ERP 6.0_NW701        sap.com                       EHP4 FOR SAP ERP 6.0 / NW7.01: Media
21                  01200615320900003195EHP4 FOR SAP ERP 6.0_NW701    EHP4 FOR ERP 6.0_NW701        sap.com                       EHP4 FOR SAP ERP 6.0 / NW7.01: Utilities/Waste&Recycl./Telco
23                  01200615320900003195EHP4 FOR SAP ERP 6.0_NW701    EHP4 FOR ERP 6.0_NW701        sap.com                       EHP4 FOR SAP ERP 6.0 / NW7.01: Leasing/Contract A/R & A/P
24                  01200615320900003195EHP4 FOR SAP ERP 6.0_NW701    EHP4 FOR ERP 6.0_NW701        sap.com                       EHP4 FOR SAP ERP 6.0 / NW7.01: Retail
25                  01200615320900003195EHP4 FOR SAP ERP 6.0_NW701    EHP4 FOR ERP 6.0_NW701        sap.com                       EHP4 FOR SAP ERP 6.0 / NW7.01: Global Trade
26                  01200615320900003195EHP4 FOR SAP ERP 6.0_NW701    EHP4 FOR ERP 6.0_NW701        sap.com                       EHP4 FOR SAP ERP 6.0 / NW7.01: Financial Supply Chain Mgmt
30                  01200615320900003195EHP4 FOR SAP ERP 6.0_NW701    EHP4 FOR ERP 6.0_NW701        sap.com                       EHP4 FOR SAP ERP 6.0 / NW7.01: Central Applications
31                  01200615320900003195EHP4 FOR SAP ERP 6.0_NW701    EHP4 FOR ERP 6.0_NW701        sap.com                       EHP4 FOR SAP ERP 6.0 / NW7.01: Strategic Enterprise Mgmt
33                  01200615320900003195EHP4 FOR SAP ERP 6.0_NW701    EHP4 FOR ERP 6.0_NW701        sap.com                       EHP4 FOR SAP ERP 6.0 / NW7.01: Human Capital Management
37                  01200615320900003195EHP4 FOR SAP ERP 6.0_NW701    EHP4 FOR ERP 6.0_NW701        sap.com                       EHP4 FOR SAP ERP 6.0 / NW7.01: Oil & Gas
38                  01200615320900003195EHP4 FOR SAP ERP 6.0_NW701    EHP4 FOR ERP 6.0_NW701        sap.com                       EHP4 FOR SAP ERP 6.0 / NW7.01: Catch Weight Management
42                  01200615320900003195EHP4 FOR SAP ERP 6.0_NW701    EHP4 FOR ERP 6.0_NW701        sap.com                       EHP4 FOR SAP ERP 6.0 / NW7.01: Public Sector Accounting
43                  01200615320900003195EHP4 FOR SAP ERP 6.0_NW701    EHP4 FOR ERP 6.0_NW701        sap.com                       EHP4 FOR SAP ERP 6.0 / NW7.01: Insurance
44                  01200615320900003195EHP4 FOR SAP ERP 6.0_NW701    EHP4 FOR ERP 6.0_NW701        sap.com                       EHP4 FOR SAP ERP 6.0 / NW7.01: Hospital
45                  01200615320900003195EHP4 FOR SAP ERP 6.0_NW701    EHP4 FOR ERP 6.0_NW701        sap.com                       EHP4 FOR SAP ERP 6.0 / NW7.01: SAP ECC Server VPack successor
46                  01200615320900003195EHP4 FOR SAP ERP 6.0_NW701    EHP4 FOR ERP 6.0_NW701        sap.com                       EHP4 FOR SAP ERP 6.0 / NW7.01: ERecruiting
47                  01200615320900003195EHP4 FOR SAP ERP 6.0_NW701    EHP4 FOR ERP 6.0_NW701        sap.com                       EHP4 FOR SAP ERP 6.0 / NW7.01: Defense & Public Security
48                  01200615320900003195EHP4 FOR SAP ERP 6.0_NW701    EHP4 FOR ERP 6.0_NW701        sap.com                       EHP4 FOR SAP ERP 6.0 / NW7.01: Financial Services
55                  01200615320900003195EHP4 FOR SAP ERP 6.0_NW701    EHP4 FOR ERP 6.0_NW701        sap.com                       EHP4 FOR SAP ERP 6.0 / NW7.01: Oil & Gas with Utilities
56                  01200615320900003195EHP4 FOR SAP ERP 6.0_NW701    EHP4 FOR ERP 6.0_NW701        sap.com                       EHP4 FOR SAP ERP 6.0 / NW7.01: Defense
59                  01200615320900003195EHP4 FOR SAP ERP 6.0_NW701    EHP4 FOR ERP 6.0_NW701        sap.com                       EHP4 FOR SAP ERP 6.0 / NW7.01: PLM Core
69                  01200615320900003195EHP4 FOR SAP ERP 6.0_NW701    EHP4 FOR ERP 6.0_NW701        sap.com                       EHP4 FOR SAP ERP 6.0 / NW7.01: EAM config control
9                   01200615320900003195EHP4 FOR SAP ERP 6.0_NW701    EHP4 FOR ERP 6.0_NW701        sap.com                       EHP4 FOR SAP ERP 6.0 / NW7.01: SAP ESA ECC-SE
++++++++++++++++

Though we have configured Java in solution manager the stack file that is generated does not contain any java components
You will probably need to update Solution Manager first with a number of corrections so you can get a correctly generated stack file. Depending on your ST400 version in Solution Manager apply collective corrections from "Note 1461849 - MOpz: Collective corrections 24" or "Note 1452118 - MOpz: Collective Corrections 23". They generally deal with these kind of stack file issues.
Nelis

BI Publisher Word Template The report does not contain any data fields.

I have OBIEE BI Publisher report (10.3.4) working fine using BIP but using MS Word 2003 I want to create new template and want to add charts etc.
Step 1. In MS Word I successfully login Oracle BI Publisher as Administrator
2. Oracle BI Publisher -> Open (I open the report)
3. Go to Insert -> Table Wizard
I get this error:
The report does not contain any data fields. Please make sure that the reports generates data with the default settings or provide a valid XML file.
Please help

Hi
How do I load XML data? Also why XML data load is required? Do I have to export XML data from BIP View screen and load from the same file from the word?
Please clarify
Thanks

Unable to load the EJB module. DeploymentContext does not contain any EJB.

I'm writing an enterprise application to familiarize myself with Glassfish 3.1.2 and EJB 3.1. I've created several local, stateless beans, and injected one into a JSF managed bean. The ejb and web modules compile fine, but when I launch the application with Glassfish I get the following startup error and the application does not deploy. I don't understand what it means, can someone ellaborate?
SEVERE: Exception while invoking class org.glassfish.ejb.startup.EjbDeployer prepare method
SEVERE: Exception while invoking class org.glassfish.javaee.full.deployment.EarDeployer prepare method
SEVERE: Exception while preparing the app
SEVERE: Unable to load the EJB module. DeploymentContext does not contain any EJB. Check the archive to ensure correct packaging for D:\Documents\NetBeansProjects\Test\dist\gfdeploy\Test\Test-war_war.
If you use EJB component annotations to define the EJB, and an ejb or web deployment descriptor is also used, please make sure that the deployment descriptor references a Java EE 5 or higher version schema, and that the metadata-complete attribute is not set to true, so the component annotations can be processed as expected
org.glassfish.deployment.common.DeploymentException: Unable to load the EJB module. DeploymentContext does not contain any EJB. Check the archive to ensure correct packaging for D:\Documents\NetBeansProjects\Test\dist\gfdeploy\Test\Test-war_war.
If you use EJB component annotations to define the EJB, and an ejb or web deployment descriptor is also used, please make sure that the deployment descriptor references a Java EE 5 or higher version schema, and that the metadata-complete attribute is not set to true, so the component annotations can be processed as expected
     at org.glassfish.javaee.full.deployment.EarDeployer.prepare(EarDeployer.java:166)
     at com.sun.enterprise.v3.server.ApplicationLifecycle.prepareModule(ApplicationLifecycle.java:871)
     at com.sun.enterprise.v3.server.ApplicationLifecycle.deploy(ApplicationLifecycle.java:410)
     at com.sun.enterprise.v3.server.ApplicationLifecycle.deploy(ApplicationLifecycle.java:240)
     at org.glassfish.deployment.admin.DeployCommand.execute(DeployCommand.java:389)
     at com.sun.enterprise.v3.admin.CommandRunnerImpl$1.execute(CommandRunnerImpl.java:348)
     at com.sun.enterprise.v3.admin.CommandRunnerImpl.doCommand(CommandRunnerImpl.java:363)
     at com.sun.enterprise.v3.admin.CommandRunnerImpl.doCommand(CommandRunnerImpl.java:1085)
     at com.sun.enterprise.v3.admin.CommandRunnerImpl.access$1200(CommandRunnerImpl.java:95)
     at com.sun.enterprise.v3.admin.CommandRunnerImpl$ExecutionContext.execute(CommandRunnerImpl.java:1291)
     at com.sun.enterprise.v3.admin.CommandRunnerImpl$ExecutionContext.execute(CommandRunnerImpl.java:1259)
     at com.sun.enterprise.v3.admin.AdminAdapter.doCommand(AdminAdapter.java:461)
     at com.sun.enterprise.v3.admin.AdminAdapter.service(AdminAdapter.java:212)
     at com.sun.grizzly.tcp.http11.GrizzlyAdapter.service(GrizzlyAdapter.java:179)
     at com.sun.enterprise.v3.server.HK2Dispatcher.dispath(HK2Dispatcher.java:117)
     at com.sun.enterprise.v3.services.impl.ContainerMapper$Hk2DispatcherCallable.call(ContainerMapper.java:354)
     at com.sun.enterprise.v3.services.impl.ContainerMapper.service(ContainerMapper.java:195)
     at com.sun.grizzly.http.ProcessorTask.invokeAdapter(ProcessorTask.java:860)
     at com.sun.grizzly.http.ProcessorTask.doProcess(ProcessorTask.java:757)
     at com.sun.grizzly.http.ProcessorTask.process(ProcessorTask.java:1056)
     at com.sun.grizzly.http.DefaultProtocolFilter.execute(DefaultProtocolFilter.java:229)
     at com.sun.grizzly.DefaultProtocolChain.executeProtocolFilter(DefaultProtocolChain.java:137)
     at com.sun.grizzly.DefaultProtocolChain.execute(DefaultProtocolChain.java:104)
     at com.sun.grizzly.DefaultProtocolChain.execute(DefaultProtocolChain.java:90)
     at com.sun.grizzly.http.HttpProtocolChain.execute(HttpProtocolChain.java:79)
     at com.sun.grizzly.ProtocolChainContextTask.doCall(ProtocolChainContextTask.java:54)
     at com.sun.grizzly.SelectionKeyContextTask.call(SelectionKeyContextTask.java:59)
     at com.sun.grizzly.ContextTask.run(ContextTask.java:71)
     at com.sun.grizzly.util.AbstractThreadPool$Worker.doWork(AbstractThreadPool.java:532)
     at com.sun.grizzly.util.AbstractThreadPool$Worker.run(AbstractThreadPool.java:513)
     at java.lang.Thread.run(Thread.java:722)

My guess is that you deployed an ejb without bean in it. when you have an ejb module, be sure you have at least one bean present.
Are you sure you have implementend some beans? Or did you do this only in the web module?
Try adding an @Stateless bean doing nothing in you ejb module, redeploy and let me know if that works

File Screening Audit Report does not contain any data : report statistics is empty

Hi ,
I have enabled File screen audit and Record file screening activity in auditing database options in file server 2008.
I am getting details of file screen audit in Event log , But incident report file screen audit report does not contain any value.
Getting report for each incident of file screen audit , But it does not contain any data in report statistics.
Data available in scheduled report of file screen audit.. not available in incident report only..
Please assist...
Thanks,
Vasanth.M
Thanks, Vasanth.M.

Please note that, If the Record file screening activity in the auditing database check box is cleared, the File Screening Audit Reports will not contain any information. To configure file screen audit, I would refer you on this informative
technet library :
https://technet.microsoft.com/en-us/library/cc754540.aspx
Carlo

The kind infoobject does not exist in the CMS

hi, all of a sudden, when i import a new biar file to the server, i got the below error message:
the kind infoobject does not exist in the CMS
the server worked fine before. and then i imported the biar to another server, it works fine, and seems not the biar problem.
then i found some error explanation
Cause
The InfoObject type does not exist in the CMS
Action
Ensure that the InfoObject type is propertly installed.
and
Cause
An InfoObject type is missing.
Action
Ensure that the XSD for this type of InfoObject is installed.
I want to know how to reinstall the infoObject type.
or any other idear on this.
thanks all.
Ada

WHat's the exact version of the source and the target BO system?
Regards,
Sratos

HT4910 My iCloud contact list does not contain all the contacts that are in my phone. If I delete one from my phone it will delete it instantly from the iCloud contacts. But how do I get all those other contacts on my phone to the iCould on my Windows c

My iCloud contact list does not contain all the contacts listed in my iPhone 5S. If I delete a contact from the phone it instantly deletes it from the iCloud on my PC. But my PC iCloud list is lacking many of the contacts on my phone.

And which account did you enter these contacts in?
On My Mac
or
iCloud?

Error 1074395241: The template descriptor does not contain data required for rotation-invariant matching.

Hello all,
I am using the IMAQ Match Pattern 4 to detect the rotation angle of a template image. However, it shows the error: "Error 1074395241: The template descriptor does not contain data required for rotation-invariant matching." What is the problem exactly? How to solve this? The details are explained below.
My project is a little bit complicated. Part of the block diagram containing the IMAQ Match Pattern 4 is shown below:
The source image is a series of frames of images read from an AVI video (I used a for loop to process the images frame by frame). The template image is a selected region of the first frame. So it means, the user selected the object of ineterst in the first frame of the video, and in each of the following frames, we need to find the matched object of interest & determine its rotation angle. When I run the block diagram shown above, it does not have any error. However, it shows the rotation angle as zero no matter what it "really" is. Therefore, I changed the block diagram by adding the parameters, shown below:
But in this case, when I run it, it shows the error that I have indicated in the subject line.
If you need more details about my project to identify the problem, please let me know.
Thanks in advance.
Solved!
Go to Solution.

-Please go through pattern matching example which comes along with labview fiirst
Go to labview Help>>Find Examples and you can search for example.
-You have create template with angle range and what type of pattern matching you want use.
-For this you have to use IMAQ Learn Pattern before using IMAQ Match Pattern 4
Refer :http://zone.ni.com/reference/en-XX/help/370281U-01/imaqvision/imaq_match_pattern_4/
Thanks
uday,
Please Mark the solution as accepted if your problem is solved and help author by clicking on kudoes
Certified LabVIEW Associate Developer (CLAD) Using LV13

Errors in the high-level relational engine. The data source view does not contain a definition for the table or view. The Source property may not have been set.

Hi All,
I have a cube in which i'm using the TIME DIM that i created in the warehouse. But now i wanted a new measure in the cube which is Average over time and when i wanted to created the new measure i got a message that no time dim was defined, so i created a
new time dimension in the SSAS using wizard. But when i tried to process the new time dimension i'm getting the follwoing error message
"Errors in the high-level relational engine. The data source view does not contain a definition for "SSASTIMEDIM" the table or view. The Source property may not have been set."
Can anyone please tell me why i cannot create a new measure average over the time using my time dimension? Also what am i doing wrong with the SSASTIMEDIM, that i'm getting the error.
Thanks

Hi PMunshi,
According to your description, you get the above error when processing the time dimension. Right?
In this scenario, since you have updated the DSV, it should have no problem on the table existence. One possibility is that table has been specified for tracking in the notifications for proactive caching, but isn't available any more for some
reason. Please change the setting in Proactive Caching into "MOLAP".
Reference:
How To Implement Proactive Caching in SQL Server Analysis Services SSAS
If you have any question, please feel free to ask.
Best Regards,
Simon Hou
TechNet Community Support

InfoObject does not contain alpha conforming 1

Similar Messages

Maybe you are looking for