Infoobject Extraction

Hi frns,
I have the below requirement to be done but not sure how to start.Please let me know if any one have idea
InfoObject 0COMP_CODE
Turn on short text and extract from T880-NAME2 in ECC.  Not sure if T880 is already extracted into BW, please check.
add 3rd local currency, 0LOC_CURRC3 as attribute and source from T880-CURR.
add currency type as attribute and source from T001A-CURTP2.
InfoObject 0COMPANY
Turn on short text and extract them from T880- NAME2.
Thanks
Swathi

Hi,
If you need short description and you are not finding the same in T tables then you have to load the same. For that you need to use the data sources mentioned in previous reply 0COMP_CODE_TEXT and 0COMPANY_TEXT.
You are getting transformation inactive error becasue you just inluded the object in master data. now you have to map the same from data source in transformation.
After doing and saving the same you need to activate transformation as well as Info Object.
I hope it will help.
Thanks,
S

Similar Messages

  • Using a standard infoobject as a reference infoobject ???very urgent!!

    hi guys,
    i have to develop a report. so now here my requirement is that i have to display the fields in the report from an ods. Here there is one standard infoobject extracted from r/3 and is been used as a reference object for one zfield. Now the requirement is in such a way that i have to use the same infoobject's medium txt to display the details in another zfield. so the usage of the infoobject comes twice here. Now can anyone explain me how to solve the problem.
    (same standard infoobject is used to refer two different zfields to display the data in the reporting in two different fields.
    thanks
    rani

    Dear Rani,
        Reference field means, reference objects wont contain any master data. Same master data available for all reference objects.
    Ex: Standarad object : std_1 and based on this 2 reference objects(Ref_1 & Ref_2) created. Same master data(Data of main object: std_1) will be used for all three objects.
          So you can use ony of the objects based on your requirement. you will get same text for same key.
    http://help.sap.com/saphelp_nw04/helpdata/en/ff/f470375fbf307ee10000009b38f8cf/content.htm
    Hope it Helps
    Srini

  • Looking for an InfoObject for R/3 table TVKGG

    Does anyone know of a business content InfoObject/extract for the R/3 table TVKGG?  This is the Customer Condition Group table.
    Or perhaps more helpful would be if anyone knows of a directory which (if you know the table) would show you if there is business content extract.

    Hi,
    You can use R/3 table ROOSFIELD to find the datasource giving the field name.
    So, for your requirement, in data browser for table ROOSFIELD, give KDKGR in field name selection input and execute.
    I checked this and found that there is no datasource for this field TVKGG-KDKGR.
    Try KUNNR and it will show all datasources having this field like 0CUSTOMER_ATTR, 0CUSTOMER_TEXT etc..
    Hope this helps to some extent.
    Thanks
    Archana

  • Infoobject change for extracting texts data.

    Hi BW guys,
    Here is my requirement.
    I have one info object 'salesmen', which is already used in some other ODS & Cube's.
    Now I want to extract texts data for the object 'salesmen', for that I will need to change my infoobject (changes are : adding credit control are object under compounding).
    But while i am activating the info object again it is giving errors.
    Error messages:
    1) InfoObject XXXXX (or ref.) is used in data targets with data -> Error:
    2) Characteristic XXXXX: Compound or reference was changed
    3)InfoObject XXXXX being used in InfoCube XXXX (contains data)
    etc....
    But i don't want to delete the data in any data target.
    Is there any way to solve this problem?
    Thanks in advance......

    Hi,
    If you have not many cubes and ODSs with this salesman, you can consider another, beter, but more time-consuming way.
    1. Create a new IO for your salesman, add a compounding attribute as you want.
    2. Load master data for the new IO.
    3. Create copies of your infoproviders.
    3. In each of them delete an old salesman IO and insert a new one.
    4. Create export datasourses for old cubes.
    5. Create update rules for new data targets based on old ones.
    6. In URs map your new IO with the old one. All other IOs should be mapped 1:1 (new<-old).
    7. Reload data targets.
    That's all.
    The way I proposed earlier is less preferrable. Because anyway you'll have to change loaded into data targets data. And in this case it's better to change data model as you want.
    Best regards,
    Eugene

  • In case of co-pa extraction what is the system naming for infoobjects?

    in normal case /BIC/  is the naming for system of bw, but in case of co-pa extraction ,same or any other different

    Hi,
    CO-PA is loaded just as usual like other data source.
    So you create infoobjects same as in BW and use them to map with CO-PA data source...there is nothing special...so its same /BIC/....
    Thanks
    Ajeet

  • Extract InfoObject data, Text and attributes

    Hi guys,
    I have a need to extract InfoObjects data for 3rd-party use
    I mean the whole snow flakes schema including the 'P' table and all accompanied 'T' tables,
    I can do it with database view through SE11, but it is a lot of "dirty" job.
    I also know that I can export infoobect data through openhub but it gives me either text or attributes only, I cannot combine them.
    Does anyone have an idea on how to accomplish that?
    Regards
    Shlomi

    Hi Sven and Vikram
    As I wrote in my first post,
    I know that I can create a view in SE11 but my problem was that it is a long process as I have over 30 tables and that's only to 1 Infoobject, I will need to do the same to many Infoobjects.
    I was looking for a faster way.
    Maybe there is already database view that is created automatically or there is another way without having to analyze all tables and join them manually.
    Regards
    Shlomi

  • Unable to extract data from R/3 into BW 3.5

    I have just started learning BW. I am currently trying to upload data from R/3 into BW. I have tried uploading data into InfoCube , ODS, InfoObjects from R/3 and in all cases I am getting error messages. Please shed some light as the what am doing wrong......below are the steps that I have done
    For loading transaction data from R/3 in ODS
    1. Created view from VBAP and VBAK tables in R/3
    2. Created Transaction type DataSource in R/3 using RSO2 transaction
    3. Replicated above DataSource in BW under Source Systems. using 'Replicate DataSource'
    4. Created ODS object along the same lines as the above created view in R/3
    5.Created InfoSource and assigned the replicated DataSource
    6. Activated the Transfer Rules, Transfer Structure, Communivcation Structure
    7. Created Update Rules for ODS and activated them
    8. Created InfoPackage and started the Data Request
    The error message that I see in Monitor is as below
    Requests (messages): Everything OK
             Data request arranged
             Confirmed with: OK
    Extraction (messages): Missing messages
             Missing message: Request received
             Missing message: Number of sent records
             Missing message: Selection completed
    Transfer (IDocs and TRFC): Errors occurred
             Request IDoc : IDoc with errors added
    Processing (data packet): No data
    I am getting the same error message when I try InfoCube instead of ODS.
    Please let me know what is wrong
    Vidya

    I checked the 'Details' and 'Status' tab page in Monitor
    On Status Page it says
    Request still running
    Diagnosis
    No errors could be found. The current process has probably not finished yet.
    System response
    The ALE inbox of the SAP BW is identical to the ALE outbox of the source system
    and/or
    the maximum wait time for this request has not yet run out
    and/or
    the batch job in the source system has not yet ended.
    Current status
    No Idocs arrived from the source system.
    On Details Tab page, it says
    Requests (messages): Everything OK
    Data request arranged
    Confirmed with: OK
    Extraction (messages): Missing messages
    Missing message: Request received
    Missing message: Number of sent records
    Missing message: Selection completed
    Transfer (IDocs and TRFC): Errors occurred
    Request IDoc : IDoc with errors added
    Processing (data packet): No data

  • How to add new infoobject to existing cube or dso?

    Hi all,
    Can we add new infoobject to exixting cube in BW 3.5 ver? if yes how can we add? Please provide me steps.
    Thank you.
    Sunil

    Hi Sunil,
    If you want to add new info object to the IC or DSO which is already holding data - then you need to make a copy of that particular DSO/IC and load the data into dummy.
    Now delete the data from the IC/DSO to which you want to add the new info object. once the data is deleted it will allow you to add new info object to you IC/DSO.
    save it and activate the IC/DSO
    load the data from Dummy DSO and from new run on wards the newly updated info object will also get updated(historical data will not be updated if its newly added to DS as well).
    If you want the historical data for the newly added field then you need to drop the compelte data and need to extract from source.
    Note: You can't include the new info objects are change the existing info objects if there is data exist in the IC/DSO
    Regards
    KP
    Edited by: prashanthk on Dec 31, 2010 10:54 AM

  • Urgent: Problems in Generic Extraction by Function Module

    Hi BW Gurus,
    I am new to SDN and also new to generic extraction using function module. My requirement is to extract long text(142 char) from CRM to BW as the text is not stored in database table I used function module read_text with in another ZXXX function module copy of (RSAX_BIW_GET_DATA_SIMPLE). In my extract structure I used GUID(char,32), Langu, long text(142 char) and 2 placeholders. Text can be extracted by passing STXH table fields(Tdname, Tdid, Tdobject, Tdspars) to read_text as parameters and i also need to use CRMD_ORDERADM_H field GUID(32 char) to compare 1st 32 chars of tdname(70 char) with Guid to select Guids and loop thru this Guids and for each Guid i need to append lines of text to e_t_data but as i donot know ABAP i unable to write the code for this. Through my friends help i wrote code when i check in RSA3 it is displaying the text but when i replicate into BW and load into data target in monitor the status is red with records initially but afterwards it will be red status again with 0 from 0 records for initial load again.when i check on job logs the errors i have are:
    The background job has created a job log file of 2Gb size and it is currently on a infinite loop writing entries into the SAP System Log that it cannot write to the Job log file due to “Error 22 for write/read access to a file” this is because of the datasource i have created. Please find my Function module and if anyone would please correct FM and send me that will be really great.I appreciate it in advance.
    MY Function Module is:
    FUNCTION Z_CRMORDERH_STR_TXT.
    ""Local Interface:
    *"  IMPORTING
    *"     VALUE(I_REQUNR) TYPE  SRSC_S_IF_SIMPLE-REQUNR
    *"     VALUE(I_DSOURCE) TYPE  SRSC_S_IF_SIMPLE-DSOURCE OPTIONAL
    *"     VALUE(I_MAXSIZE) TYPE  SRSC_S_IF_SIMPLE-MAXSIZE OPTIONAL
    *"     VALUE(I_INITFLAG) TYPE  SRSC_S_IF_SIMPLE-INITFLAG OPTIONAL
    *"     VALUE(I_READ_ONLY) TYPE  SRSC_S_IF_SIMPLE-READONLY OPTIONAL
    *"     VALUE(I_REMOTE_CALL) TYPE  SBIWA_FLAG DEFAULT SBIWA_C_FLAG_OFF
    *"  TABLES
    *"      I_T_SELECT TYPE  SRSC_S_IF_SIMPLE-T_SELECT OPTIONAL
    *"      I_T_FIELDS TYPE  SRSC_S_IF_SIMPLE-T_FIELDS OPTIONAL
    *"      E_T_DATA STRUCTURE  YCRM_TEXT_STR OPTIONAL
    *"  EXCEPTIONS
    *"      NO_MORE_DATA
    *"      ERROR_PASSED_TO_MESS_HANDLER
    ***"  EXCEPTIONS     NO_MORE_DATA
    *"      ERROR_PASSED_TO_MESS_HANDLER
      Tables: CRMD_ORDERADM_H, STXH.
    Auxiliary Selection criteria structure
    data: l_s_select type srsc_s_select.
    Maximum number of lines for DB table
      Statics: s_s_if type srsc_s_if_simple,
    counter
             s_counter_datapakid like sy-tabix,
    Cursor
             s_cursor type cursor.
    data: i_crmtext type standard table of TLINE .
      types: begin of xsreph ,
              GUID type CRMD_ORDERADM_H-guid,
            end of xsreph.
       data: i_guid type standard table of xsreph.
      data: I_TEXT type STXH-TDNAME.
      data: xempl like  YCRM_TEXT_STR occurs 0 with header line.
      data: t_tab like dd03l-tabname.
    Select ranges
      ranges: l_r_guid for CRMD_ORDERADM_H-guid.
             l_r_connid  for sflight-connid.
    Initialization mode (first call by SAPI) or data transfer mode
    (following calls) ?
      if i_initflag = sbiwa_c_flag_on.
    Initialization: check input parameters
                    buffer input parameters
                    prepare data selection
    Check DataSource validity
        case i_dsource.
          when 'yCRM_TEXT'.  " for S_SREPH1
          when others.
            if 1 = 2. message e009(r3). endif.
    this is a typical log call. Please write every error message like this
            log_write 'E'                  "message type
                      'R3'                 "message class
                      '009'                "message number
                    i_dsource   "message variable 1
                      ' '.                 "message variable 2
            raise error_passed_to_mess_handler.
        endcase.
       append lines of i_t_select to s_s_if-t_select.
    Fill parameter buffer for data extraction calls
        s_s_if-requnr    = i_requnr.
        s_s_if-dsource = i_dsource.
        s_s_if-maxsize   = i_maxsize.
    Fill field list table for an optimized select statement
    (in case that there is no 1:1 relation between InfoSource fields
    and database table fields this may be far from beeing trivial)
       append lines of i_t_fields to s_s_if-t_fields.
    we will do our selection based on what is in the p table for the
    infoobject
      else.                 "Initialization mode or data extraction ?
    Data transfer: First Call      OPEN CURSOR + FETCH
                   Following Calls FETCH only
    First data package -> OPEN CURSOR
        if s_counter_datapakid = 0.
    Fill range tables BW will only pass down simple selection criteria
    of the type SIGN = 'I' and OPTION = 'EQ' or OPTION = 'BT'.
        LOOP AT S_S_IF-T_SELECT INTO L_S_SELECT WHERE FIELDNM = 'GUID'.
            MOVE-CORRESPONDING L_S_SELECT TO L_R_GUID.
            APPEND L_R_GUID.
          ENDLOOP.
          case i_dsource.
            when 'YCRM_TEXT'.  " for S_SREPH1
              t_tab = 'CRMD_ORDERADM_H'.
          endcase.
          select GUID
          from (t_tab)
          into table i_guid where   PROCESS_TYPE = 'ZACI'  and ( OBJECT_ID < '0000000042').
         select tdname from stxh into i_text where tdobject = 'TEXT'.
         if sy-subrc ne 0.
           message e009(r3).
    this is a typical log call. Please write every error message like this
           log_write 'E'                  "message type
                     'R3'                 "message class
                     '009'                "message number
                     i_dsource   "message variable 1
                     'No master data found'.           "message variable 2
           raise error_passed_to_mess_handler.
         endif.
    Determine number of database records to be read per FETCH statement
    from input parameter I_MAXSIZE. If there is a one to one relation
    between DataSource table lines and database entries, this is trivial.
    In other cases, it may be impossible and some estimated value has to
    be determined.
         open cursor with hold s_cursor for
         select (s_s_if-t_fields) from CRMD_ORDERADM_H
                                  where GUID in L_R_GUID .
                                   ENDIF.
    Fetch records into interface table.
      named E_T_'Name of extract structure'.
       fetch next cursor s_cursor
                  appending corresponding fields
                  of table e_t_data
                  package size s_s_if-maxsize.
        IF SY-SUBRC <> 0.
         CLOSE CURSOR S_CURSOR.
         RAISE NO_MORE_DATA.
       ENDIF.
    as we are doing this only once can use the select statement.
    ***data: crmtext like tline occurs 0 with header line.
    **data: i_crmtext type standard table of TLINE.
    **data: i_guid type standard table of xsreph.
    data: l_guid type THEAD-TDNAME.
    data: st_guid type xsreph.
    data: st_crmtext type TLINE.
    data: lan type THEAD-TDSPRAS.
    lan = 'E'.
    loop at i_guid into st_guid.
    l_guid = st_guid-guid.
    CALL FUNCTION 'READ_TEXT'
       EXPORTING
       CLIENT                        = SY-MANDT
         ID                            = 'A002'
         LANGUAGE                      = lan
         NAME                          = l_guid
         OBJECT                        = 'CRM_ORDERH'
       ARCHIVE_HANDLE                = 0
       LOCAL_CAT                     = ' '
    IMPORTING
       HEADER                        =
       TABLES
         LINES                         = i_crmtext.
    EXCEPTIONS
       ID                            = 1
       LANGUAGE                      = 2
       NAME                          = 3
       NOT_FOUND                     = 4
       OBJECT                        = 5
       REFERENCE_CHECK               = 6
       WRONG_ACCESS_TO_ARCHIVE       = 7
       OTHERS                        = 8
    e_t_data-guid = l_guid.
    loop at i_crmtext into st_crmtext.
    move lan to e_t_data-langu.
    move st_crmtext-tdline to e_t_data-description.
    append e_t_data.
    endif.
    endloop.
    clear: st_guid,l_guid.
    refresh: i_crmtext.
    endloop.
    S_COUNTER_DATAPAKID = S_COUNTER_DATAPAKID + 1.
    endif.
    ENDFUNCTION.
    please Gurus as I donot know ABAP i appreciate if anyone would write a FM based on requirement and send me that will be really great this is my request. I gurantee of award points for good answers.
    Regards
    Kishore

    Hi,
    The statement <b>RAISE NO_MORE_DATA</b> should be active (uncommented) in your code. Otherwise, the infinte loop occurs.
    See also, the Siggi's blog:
    /people/siegfried.szameitat/blog/2005/09/29/generic-extraction-via-function-module
    BTW, was it your thread here:
    Re: Urgent: problems in extracting Long Text
    Best regards,
    Eugene

  • Loading decimal  value to an infoobject of type char

    I have an extract structure with field timestamp, which is of type dec and length 15. Now i want to load this value to an infoobject in ODS. But this infoobject is of type char and length 18. when infopackage loading is scheduled it is giving the following error. Record 1 :InfoObject /BIC/IFITMSTMP does not contain alpa-conforming value 20061206084944.
    Is it because i tried to move a dec valu into a char field with a different length? If so  how will i load a decimal value of length 15 to a char of length 18. Can anyone please help me with this?
    Thanks in advance.

    if u r using BI7.0
    go to the datasource of the cube
    in the general info tab of the datasource
    there is a check box with PSA not typed
    check it
    if u check it all the values from the external source will be converted into character format irrespective of their data type

  • Loading a decimal value to an infoobject of type char

    I have an extract structure with field timestamp, which is of type dec and length 15. Now i want to load this value to an infoobject in ODS. But this infoobject is of type char and length 18. when infopackage loading is scheduled it is giving the following error. Record 1 :InfoObject /BIC/IFITMSTMP does not contain alpa-conforming value 20061206084944.
    Is it because i tried to move a dec valu into a char field with a different length? If so  how will i load a decimal value of length 15 to a char of length 18. Can anyone please help me with this?
    Thanks in advance.

    if u r using BI7.0
    go to the datasource of the cube
    in the general info tab of the datasource
    there is a check box with PSA not typed
    check it
    if u check it all the values from the external source will be converted into character format irrespective of their data type

  • How to load master data with text into infoObject in BI 7.0

    Hi all;
    I have an infoobject 0employee ( this is for employee number ,8 character long), with medium text option.
    I would like to load Employee name as a text option for employee number.
    How do I load this mater data into this 0employee object,
    Please help.
    I did look for something similar in the forum and there are many of them, but I couldn't find anything that for BI 7.0 and really clear help for me. Sorry to ask a question that been asked before.
    thanks.
    Raiine

    hi rainnie,
    check this link t oload master data in BI 7
    Re: BI 7.0 flat File extraction
    as you are using SAP defined infoobject you can start from the creation of datasource.
    text format for the flat file is
    LANGUAGE,INFOOBJECT,TEXT
    EN,0EMPLOYEE,RAINNIE
    You have to create ,infopakage, transformation ,dtp for both the attribute and text.
    hope this helps
    cheers
    Sunil

  • Unable to replicate data to BI using LO Extraction

    Hi,
    I unable to replicate from ECC(LO Extraction)the data...when i replicate the data from ECC i got some of the folling the data sources...
    80BPARTNERH 80BPARTNERH Change BI7CLNT001
    80PLANTH 80PLANTH Change BI7CLNT001
    Aggregated Status for Area of Responsibility 80RSPL_AST Change BI7CLNT001
    Assigned Selections for Areas of Responsibility 80RSPL_SEL Change BI7CLNT001
    Assigned Selections for Planning Sessions 80RSPL_SPS Change BI7CLNT001
    BI Trace Tool - End Analysis (Error Assignment) 80RSTT_O03 Change BI7CLNT001
    BI Trace Tool - Header Data for Test Logs (Transactional) 80RSTT_O01 Change BI7CLNT001
    BI Trace-Tool - Tested Functions 80RSTT_O02 Change BI7CLNT001
    Business Partner 80BPARTNERM Change BI7CLNT001
    Business Partner 80BPARTNERT Change BI7CLNT001
    Current Status for Area of Responsibility 80RSPL_CST Change BI7CLNT001
    Lock Management 80RSPL_LCK Change BI7CLNT001
    Person 80PERSONM Change BI7CLNT001
    Person 80PERSONT Change BI7CLNT001
    Plan. Session Status 80RSPL_PSS Change BI7CLNT001
    Planning Calendar 80RSPL_PLC Change BI7CLNT001
    Plant 80PLANTM Change BI7CLNT001
    Plant 80PLANTT Change BI7CLNT001
    Processor of Areas of Responsibility 80RSPL_AGS Change BI7CLNT001
    Status History for Area of Responsibility 80RSPL_HST Change BI7CLNT001
    Test 8TEST Change BI7CLNT001
    Trace Tool Reporting: Active Errors 80RSTT_O10 Change BI7CLNT001
    Trace Tool Reporting: InfoProvider-InfoObject Relationship 80RSTT_O07 Change BI7CLNT001
    Trace Tool Reporting: MultiProvider-PartProvider Relatnship 80RSTT_O08 Change BI7CLNT001
    Trace Tool Reporting: Test Assignments to Test Packages 80RSTT_O09 Change BI7CLNT001
    Trace-Tool Reporting: Query-Trace Relationship 80RSTT_O04 Change BI7CLNT001
    Trace-Tool Reporting: Verification Detail 80RSTT_O06 Change BI7CLNT001
    Trace-Tool Reporting: Verification Results 80RSTT_O05 Change BI7CLNT001
    I unable to get the SAP Applicating component..Wht should i do..Plz help me....
    and another Question...
    This is previous thread ...When i replicate the data source(2lis_11_vahdr)..its telling
    Data Source (OSOA) OFS_BP_TREASURY_ATTR does not exist in BI system How do u want to create the object in BI
    There r 4 options..like
    as Datasource (RSDS)
    as 3.x Datasource (ISFS)
    this and following 9 as Datasource (RSDS)
    this and following 9 as 3.x Datasource (ISFS)
    I choose as Datasource(RSDS)...
    Which one i need to Check....
    But When i replicate the data it does showed application component...
    Wht should i do..
    Thanks
    Gopi

    Thanks for ur Reply..
    Iknow that wht u told..But even replicate the data in BI i didn't find the SAP APPLICATION COMPONENT..Option in BI..
    I have two logical systems...T90 client is not working...another is working....I couldn't find the SAP APPLICATION COMPONENT in this client...Plz tell me..
    I know how to replicate the concept....
    in that client... i have only the folling Datasources... only
    80BPARTNERH 80BPARTNERH Change BI7CLNT001 80PLANTH 80PLANTH Change BI7CLNT001 Aggregated Status for Area of Responsibility 80RSPL_AST Change BI7CLNT001 Assigned Selections for Areas of Responsibility 80RSPL_SEL Change BI7CLNT001 Assigned Selections for Planning Sessions 80RSPL_SPS Change BI7CLNT001 BI Trace Tool - End Analysis (Error Assignment) 80RSTT_O03 Change BI7CLNT001 BI Trace Tool - Header Data for Test Logs (Transactional) 80RSTT_O01 Change BI7CLNT001 BI Trace-Tool - Tested Functions 80RSTT_O02 Change BI7CLNT001 Business Partner 80BPARTNERM Change BI7CLNT001 Business Partner 80BPARTNERT Change BI7CLNT001 Current Status for Area of Responsibility 80RSPL_CST Change BI7CLNT001 Lock Management 80RSPL_LCK Change BI7CLNT001 Person 80PERSONM Change BI7CLNT001 Person 80PERSONT Change BI7CLNT001 Plan. Session Status 80RSPL_PSS Change BI7CLNT001 Planning Calendar 80RSPL_PLC Change BI7CLNT001 Plant 80PLANTM Change BI7CLNT001 Plant 80PLANTT Change BI7CLNT001 Processor of Areas of Responsibility 80RSPL_AGS Change BI7CLNT001 Status History for Area of Responsibility 80RSPL_HST Change BI7CLNT001 Test 8TEST Change BI7CLNT001 Trace Tool Reporting: Active Errors 80RSTT_O10 Change BI7CLNT001 Trace Tool Reporting: InfoProvider-InfoObject Relationship 80RSTT_O07 Change BI7CLNT001 Trace Tool Reporting: MultiProvider-PartProvider Relatnship 80RSTT_O08 Change BI7CLNT001 Trace Tool Reporting: Test Assignments to Test Packages 80RSTT_O09 Change BI7CLNT001 Trace-Tool Reporting: Query-Trace Relationship 80RSTT_O04 Change BI7CLNT001 Trace-Tool Reporting: Verification Detail 80RSTT_O06 Change BI7CLNT001 Trace-Tool Reporting: Verification Results 80RSTT_O05 Change BI7CLNT001.
    Other than that i couldn't get the another Datasources...Even i replicate...
    Waiting ur reply
    Thanks
    Gopi

  • Error while loading to master data infoobject hierarchy (0RPM_PORT_ITEM_HIERARCHY)

    Hi All,
    I have an issue while loading the data from psa to master data infoobject.
    DTP Error:
    When we had extracted the data from ECC to PSA, the values for field "IOBJNM" are not populated for 0RPM_PORT_ITEM_HIERARCHY
    Thus it is throwing an error while populating this data to the target.
    From where this field will fetch the values?
    Why these values are not being populated from ECC?
    Will there be any issue from BI side? can anyone help me on this.

    Hi Raman,
    yes I had extracted data in RSA3
    There are no values for the field "object".
    Do you have any idea why these values are missing?

  • Error while extracting data from ODS using Infospokes - URGENT

    Hi all,
    I am extracting data from an ODS using infospokes and nothing fancy, no selection criteria but I am getting an error message saying
    Syntax error in row3(-> long text) Msg id = "RG" and msgno is 102
    Any ideas on how I can see what is the exact error and how to debug this?
    thanks
    Sabrina.

    Hi Sabrina
    service.sap.com can help you getting the details of your mesg.
    I found one OSS note suitable to your mesg. So just check out OSS note # 671097. I hope this note will be some help to you. If not go and chk in the OSS you can find some more.
    Here is the note details also
    <i>Symptom
    Error message RG102: 'Syntax error in &1, row &2 (-> long text)' appears in the request log of an InfoSpoke.
    Reason and Prerequisites
    The data source is an ODS object and the extraction mode is 'delta'. The cause of the error message is that the ODS extractor is unable to select the request ID (InfoObject 0REQUID) from the change log of the ODS object. However, the request ID is mistakenly provided in the field list of the ODS object on the InfoSpoke maintenance screen. --
    Solution
    Delete the 0REQUID InfoObject from the field list of the InfoSpoke and activate the InfoSpoke. As of the patch mentioned below, the request ID in the template tab is no longer provided.
    BW 3.0B
               Import Support Package 16 for 3.0B (BW3.0B Patch 17 or SAPKW30B16) into your BW system. The Support Package will be available once note 571699 with the short text "SAPBWNews BW 3.0B Support Package 16", which describes this Support Package in more detail, has been released for customers.
    BW 3.1 Content
               Import Support Package 10 for 3.1 Content (BW3.10 Patch 11 or SAPKW31010) into your BW system. The Support Package will be available once note 571747 with the short text "SAPBWNews BW 3.1 Content Support Package 10" has been released for customers.
    To provide information in advance, the notes mentioned above may already be available before the Support Package is released. In this case, however, the short text still contains the words "preliminary version".
    Refer to note 110934, which contains information about BW Support Packages.</i>
    Regards,
    Rohini

Maybe you are looking for