Infoobject for ASTKZ field

Hi experts,
I have added the fiels ASTKZ (Identifier for statistical order) on IS 0COORDER_ATTR.
I Have to assing it a InfoObject but i cannot find an standard one. Is there any one standard I can use without problems or is it better to create a Z one?
Thanks!!

Hi
Check the table RSOSFIELDMAP with field name ASTKZ. if you find any standard info object, you can use that.
If you unable to find any thing, you can go with creating Z object as per your requirement.
Regards,
Venkatesh

Similar Messages

Finding InfoObjects for DS Fields

hello friends
I have tried to map the DS fields to InfoObjects in RSOSFIELDMAP table, but i am unable to find the InfoObject mapping for the following fields
MB_GRUND, BMSCH, USE04, USR04, VGW03. these fields are present in the standard DS for PP.
How do i find the relevant info objects for the above fields?
Do let me know ur comments
Regards
Rohit

Hi,
You can also search in RSOSFIELDMAPSH.
I got InfoObjects for two fields from this table.
USR04 0ME_USR5
USE04 0ME_USR5UNT
Regards,
Suman

Using a single master data infoobject for multiple fields

Hello experts. Today I ran un with the following problem: I am modelling an Infocube and will be receiving a flat file with several fields, of which 3 of them give information about sales representatives.
For each transaction there are 1-3 sales representatives involved, and this is reflected in the file I am going to be loading. If only one representative is involved, it means that he was in charge of a complete negotiation, and his code will be found in all three fields, if two representatives are involved, it means that one was in charge of one part of the negotiation, while the other was in charge of the rest, and according to what they were in charge, their code will appear in one or two of the fields. If three representatives are involved, each one's code will appear on the field corresponding to the part of the negotiation they were in charge of handling.
I already have the sales representative's codes as master data, but I was wondering how I can have those three fields map into the same InfoObject, if that is possible at all. Maybe in the transformation I map them to the same object? Also, what happens when you create the Data Source? As far as I know, each field in the Data Source must be unique, which makes it impossible to use my ZSALESREP InfoObject for the three fields, at least at Data Source level. What can I do in this case?

Hi Pedro Olvera,
You need 3 infoobjects in datasouce to load 3 different fields.
If you want load to a single infoobject, you can map accordingly in transformation, bult last field overwrites previous one.
Its better to maintain 3 fields in cube. Create 2 more sales Reps(ZSALESREP1 & ZSALESREP2) with Reference to ZSALESREP then you no need to maintain master data for ZSALESREP1 & ZSALESREP2.
Use these 3 fields for modeling.
Hope it Helps
Srini
[Dont forget to close the call by assigning poings.... - Food for Points: Make a Difference through Community Contribution!|https://www.sdn.sap.com/irj/sdn/index?rid=/webcontent/uuid/007928c5-c4ef-2a10-d9a3-8109ae621a82]

Finding InfoObject for DS Fields

hello friends
I have tried to map the DS fields to InfoObjects in RSOSFIELDMAP table, but i am unable to find the InfoObject mapping for the following fields
MB_GRUND, BMSCH, USE04, USR04, VGW03. these fields are present in the standard DS for PP.
How do i find the relevant info objects for the above fields?
Do let me know ur comments
Regards
Rohit

Hi,
i Checked above fields... not aviable in this datasorce...
Display the data source and find the Extract Structure name (starts with MCMC04P_0MAT). Go to SE11 and append the structure and add the fields that you want to add there. Check and activate and the new fields will be available now
or..
otherwise..
Go to enhancement... in Lo enhancement
give me ur id... i will send document..
Hope this help... assign points...
Regards,
raj
Message was edited by:
gangaraju mullapudi

InfoObject for Timestamp field??

Hi Guru's,
I'm creating a view for a generic datasource which will feed a DSO. The table I'm extracting data from has a timestamp field. I need help to find out which I/O should I use to map this field in BI. Thanks a lot.

Hi Akash,
We resolved this problem by creating a generic datasource and populating it via a simple function module.
Regards,
Payal.

Data not loading for new Fields InfoObjects from DSO to InfoCube

Hi Gurus -
               I have a DataSource that is providing data to existing DSO then to Infocube. My client asked me to added couple fields to DataSource and get the data to DSO and then DSO to InfoCube.
Here is the Old scenarion:   DataSource -> DSO -> InfoCube.
Here is the New Scenation:
     DataSource ( Added new fields) -> DSO (added new InfoObjects for Corresponding DataSource FIelds) -> InfoCube( Added new InfoObjects to mapped from DSO)
I added the new fields to DataSource, added the corresponding InfoObjects to DSO and InfoCube.
I successfully loaded data from DataSource to DSO. Data is populating for the new Fields/InfoObjects in DSO.
But when I load data from DSO to InfoCube, I don't see any data for New Fields InfoObjects in the InfoCube.
Data from DSO to InfoCube is loading fine for the Old InfoObjects Fields but not for the New InfoObjects I added in InfoCube.
-Sonali

Hi,
Why dont u debug the load through DTP debugging and check what happens to the source field and target field once it passes through the transformation. You can easily trace back where the fields are becoming blank.
The loads which you have mentioned earlier did it have values in Added Records/Transferred Records column for the cube.
Regards,
Mani

NEED STANDARD INFOOBJECTS FOR STANDARD R3 FIELDS?

HI ALL,
RESBU
BRESWK
BRTWR_R
BSAKZ
EGLKZ
EMNFR
KTWRT
KZKPF
KZKPO
MEPRF
MPROF
NETWR_R
PRDAT
REVNO
STAKO
STAPO
The above are R3 Fields, i have taken it from datasource (2LIS_02_ITM), I Just want to know the standard infoobjects used for the above said fields.
Is there any way to get the standard infoobjects for the above fields?
Please Help.

Hi
1. Goto SE11 of R3 and give RSOSFIELDMAP
2. Click on contents icon of the table and give the R3 fields names against the field
3. Execute it and the table will list out the corresponding info objects and the data source.
Hope it helps
Regards
Sadeesh

Difficulty finding BW infoobjects for corresponding R/3 fields

Hello Guys
I have enhanced an extractor 2LIS_13_VDKON, in LBWE ( LO Cockpit ). I added some new ( standard ) fields to the extract structure in the "Maintanence" tab. I also made sure that the fields were not "hidden" in the "data source" tab. Then I activated the extractor, checked in RSA6 for the new changes, and replicated this extractor in BW.
Now, I need to find corresponding standard infoobjects ( delivered or active ) for these R/3 fields to map them. How do I find these infoobjects in BW?
I have tried the following: Used tables RSOSFIELDMAP, ROOSFIELD etc. No help.
I need to find infoobjects to a total of 45 R/3 new ( but standard ) fields.
Please advise.
Thanks in advance.

Hi Sudheer
I have a total of 150 fields that I have to map the infoobjects with. Dont u think its a tiresome job to find an infoobject for each of them manually, one by one.
Dont u think there must be an easy method to do this ?
Please advise.
All these fields are a part of the standard extractor right, so there must be standard IO's in the business content ( mostly under delivered status ), we just need a method to trace them.
Thanks.

Infoobject for an R3 field

Hello all.
Is there any way (table, transaction...) to find an infoobject in BW for a R3 field??
I want to know if there is an infoobject for fields: KTOSL, VORSN, BUSTW and AWTYP from BSEG table..
Thanks and best regards,
Alfonso.

Hi dear and welcome on board !
Usually, if you don't find anything by searching in help on line, you have to look if there is something similar by comparing domain, lenght...but, in this case, it's better to create your own infoobjects !
Anyway, try to search if these fields are used by some datasource (in R/3, ROOSFIELD table) and then verify if in BW (RSOSFIELDMAP table) you have related infosource with infoobject mapping !
Hope it helps!
Bye,
Roberto
...and please don't forget to reward the answers...it's THE way to say thanks here !

F4 help for custome field

Dear All,
I have created one 'Z' InfoObject for some characteristic and i am using the same in mandatory selection parameter for query also. Now this query run monthly only and accordingly data will be loaded and manipulated. So when i choose F4 for that Z field it will show data only for that month but client wants the complete list of Z fields in F4 for paticular fiscal year.
How can i achieve this?
Regards,
SS

Hi,
In the infoObject definition (in RSA1) go to the Business Explorer tab.
There in the General Settings you have an option 'Query Execution Filter Val. Selectn'. This field describes how the selection of filter values functions when a query is executed.
Here select the 'Only values in infoProvider' option.
Now run your query and try.
Hope this helps!
Regards,
Saurabh

Errors with the global conversion rule for the field 0SOURSYSTEM.

Hello Gurus,
We are implementing CRM Activities. I enhanced the data source and when I add new info objects to 0SAL_DS01 DSO and trying to activate I'm getting there errors. Can some one please help me out in this problem?
Error in global conversion rule for InfoObject 0SOURSYSTEM
Message no. RSAR263
Diagnosis
Errors with the global conversion rule for the field 0SOURSYSTEM.
System Response
The function module delivers the following error message:
Field "" is unknown. It is neither in one of t
Procedure
Check the definition of the global conversion rule for an InfoObject
What does this error mean? We are using BI 7.
Thanks
RKR

I have around 9 source systems, do I have to maintain data for all of them for 0SOURCESYSTEM?
I set data for CRM system and then tried to activate.. but still I'm getting same error.
I;m getting this warning too...
InfoObject 0FISCVARNT needs to be in key for DataStore object C_0SAL_D
Message no. RSDODSO123
Diagnosis
Characteristic 0FISCVARNT is included in the data part of ODS object C_0SAL_D.
System Response
The fiscal year variant cannot be used in the update rules for calculating business hour characteristics.
Does this matter???
Thanks
RKR
Message was edited by:
RKR M

Issue with Safety Upper limit for CALDAY Field for Generic Data Source

Hi,
I have given Upper limit as 1 for Calday field of one of the Generic Data Sources.
I have got a doubt here.If today's load got failed and I will rerun the load next day.So Will that new run captures all 2 days records.
Can any one advise me on this.
Regards,
K.Krishna.

Hi,
A one-day upper safety interval determines that an extraction run today, only fetches records up to yesterday (if the pointer has the day before yesterday date, the extraction comprises from the day before yesterday to yesterday). This is meant to avoid missing records that were about to be persisted in the database when the delta extraction is running but whose date was determined in memory before the delta started.
If pointer has today date value and you want to load data from today and yesterday, you should use a lower safety interval. Take into account that this could reload data previously extracted. Therefore, only InfoProviders with overwritting features (DataStores or InfoObject master data) should be used as targets of this extractions.
You can find further details at:
http://help.sap.com/saphelp_nw04/helpdata/en/37/4f3ca8b672a34082ab3085d3c22145/content.htm
I hope this helps you.
Regards,
Maximiliano

Suitable BW InfoObject for EBAN-ERNAM (Name of Person who Created the Objec

Hi guys.
I would like to bring the content of EBAN-ERNAM (Name of Person who Created the Object) field into BW. As such I am looking for a suitable BW InfoObject for this particular field name. FYI, I am doing a report in MM-Purchasing area.
Appreciate your help very much.
Cheers.

I think I'll just use 0CREATEDBY for this.
Correct me if I am wrong though...

Text data source for the field Position(PLANS)

Hi Experts,
I have an infoobject ZPOSITION which i am using in a cube for this i can able to display key values but i want to display text for this ZPOSITION. The source for this field is Position(PLANS) which i have tacken from pa0001 table.
I have an another infoobject 0HRPOSITION for this i have already loaded data using data source 0HRPOSITION_TEXT.
Is there any other text datasources for this field Position(PLANS)?
And
Is it possible to load data from one info object to another info object?
Regards,
Sridhar.K

Hi Sridhar,
Check out in the infotype PA0001 for the check table for this field. In this table you will have the description for the field PLANS (Position).
I request you to catch hold of functional HR team member to know where the text value for the Position (PLANS) is stored. You can get the info from them immeadiatly.
After knowing the table where the text values for Position (PLANS) are stored, you have to create a text datasource using RSO2 transaction and replicate in BW and load data from the R/3 table.
Hope this helps you.
Regards,
Saravanan.

Looking for an InfoObject for R/3 table TVKGG

Does anyone know of a business content InfoObject/extract for the R/3 table TVKGG? This is the Customer Condition Group table.
Or perhaps more helpful would be if anyone knows of a directory which (if you know the table) would show you if there is business content extract.

Hi,
You can use R/3 table ROOSFIELD to find the datasource giving the field name.
So, for your requirement, in data browser for table ROOSFIELD, give KDKGR in field name selection input and execute.
I checked this and found that there is no datasource for this field TVKGG-KDKGR.
Try KUNNR and it will show all datasources having this field like 0CUSTOMER_ATTR, 0CUSTOMER_TEXT etc..
Hope this helps to some extent.
Thanks
Archana

Infoobject for ASTKZ field

Similar Messages

Maybe you are looking for