Infoobject for settlement rule

hi,
Can anyone tell me the infoobejct for the settlement rule on WBS element.
I am able to find only settlement area in OCOOM_CO2.
thanks
venku

HI
Check This Link
Re: Create/change settlement rule for inv.order - BAPI, funct.module???

Similar Messages

  • Mass maintenance for Settlement rule

    Hi,
    I want to maintain settlement rule of Network (cn22) and Internal order (Ko02). How can I carry out mass maintenence for these business process?
    PLease mention steps or any transaction.
    Thanks
    SIM

    HI,
    I don't know a standard transaction for settlement rules mass maintenance but you can use LSMW based on a batch-input recording  for the changes you want to make.
    Best regards, Christian

  • Business object for Settlement Rules

    Hi Experts,
    Is there any Business Object available in SAP for Settlement Rules ?
    I've identified Change Document Object RKABRV for Settlement Rules but I need respective BO to do the mapping in tcode SWEC.
    Please share.
    Thanks,
    Anirban.

    Hi Naval,
    To find out a BTE for a given tcode you can try this. In a session open SE37 tcode and open the function module BF_FUNCTIONS_FIND. Set a break point at CALL FUNCTION. Then in another session open FB08 tcode. Try creating a entry and save. When you press it will call this function module. Now check for the values in the container I_EVENT. It contains the BTE that can be used for the given tcode.
    Regards,
    Raj

  • Can User Exit works for Settlement Rule in Maintenance Order creation?

    Dear Experts,
    I have this situation where I tried to create an Internal Maintenance Order via IW31 for multiple equipments from different functional location (different cost centers) using the Object List.  However, the settlement rule has a problem to pull out as there's no Equipment in the reference object. That's the reason, I'm looking at the User Exit which I understand the IWO10027, can do the work.  Since I'm new to User Exit, can I enhance the settlement rule by the following condition.
    The costs spent on each equipment will be used as a basis of calculating the weightage (via equivalence no) for the settlement rule.
    Can it be done that way?
    regards,
    Abraham

    Sanjay,
    This data can be checked in the following user-exits:
    COZF0001: Change purchase req. for externally processed operation
    COZF0002: Change purchase req. for externally procured component
    PeteA

  • Bapi for settlement rule in IW32

    I want a bapi which will create settlement rule for IW32 ?It should be able to update Valid From And Valied to fields in IW32.
    I have checked BAPI_ALM_ORDER_MAINTAIN it does not have Valid from and Valid to fields in structure BAPI_ALM_ORDER_SRULE.I need a bapi which can be used to update those fields.

    HI
    Check This Link
    Re: Create/change settlement rule for inv.order - BAPI, funct.module???

  • Table for Settlement rule in production orders

    Hi All,
    Is there any table by which I can get list of production order numbers & the details of the settlement rule maintained in that order.?
    Regards,
    MHP

    There will be object number (OBJNR)  against each production order number which you can obtain from table AUFK.
    Later pass this object number to function module K_SETTLEMENT_RULE_GET to get the settlement rules.
    Also try function module K_SRULE_PRE_READ for reading the settlement rules. Here pass the object numbers to the tables parameters

  • BAPI for settlement rules in WBS Elements

    Hi,
    Is there any standard bapi, method, or whatever... to create / modify settlement rules for WBS Elements?.
    Rgds,
    Jose

    Look at BAPI/FM of FG CJ2054
    BAPI_BUS2054_CHANGE_MULTI     Change WBS Elements by BAPI
    BAPI_BUS2054_CREATE_MULTI     Create WBS Elements by BAPI
    BAPI_BUS2054_DELETE_MULTI     Delete WBS Elements by BAPI
    BAPI_BUS2054_GET_GUID_FROM_KEY     Read the GUIDs Using the WBS Keys
    BAPI_BUS2054_GET_KEY_FROM_GUID     Read the WBS Keys Using the GUIDs
    CJ2054_CHANGE     
    CJ2054_CREATE     
    CJ2054_DELETE     
    CJ2054_WBSELEMENT_CHANGE_STRU     
    MAP2I_BAPI_BUS2054_CHG_TO_PRPS     
    MAP2I_BAPI_BUS2054_NEW_TO_PRPS     
    MAP2I_BAPI_BUS2054_UPD_TO_PRPS     
    Regards

  • PM:Action log for Settlement rule

    Dear all,
    May i know are there any way that i can see the changes that being done at screen maintain settlement rule. For example if I change the settlement type, system will keep the change/action log for that changes.
    One more question, what the different between settlement type 'FUL' and 'PER' (impact to the settlement)
    thank you so much,
    Siti Norbaida

    Hi,
          I Hope this Documentation will help you ........
    Settlement type
    Depending on the processing type, the settlement type determines which settlement rule is used in a particular type of settlement processing.
    The SAP system supports four settlement types. The AUC and PRE settlement types are used for settlement of capital investment measures. You can only use the PER settlement type for planned settlement.
    PER (periodic settlement):
    Settlement with this settlement type covers only the costs for the relevant settlement period.
    The following data from internal cost allocations:
    Sender cost center/activity type sent
    Business process
    Quantities
    is allocated further to the following receivers:
    Cost center
    Internal order
    Sales order
    WBS element
    Cost object
    Business process
    Actual activity prices, elimination of internal business volume and variances can then be calculated correctly in Cost Center Accounting and Activity-Based Accounting;
    FUL (full settlement):
    You can use this settlement type in automatic settlements.
    The difference to periodic settlement is that in full settlement you settle each time all the costs that have occurred for a sender object for all the periods prior to the settlement (and are not yet settled). If PER rules exist, they take precedence over the FUL rule.
    Quantities from internal activity allocations are not sent to the receiver. This means that there is no guarantee that actual activity prices, elimination of internal business volume, and variance calculation will take place correctly. For this reason, we do not recommend that you use FUL for cost centers or business processes.
    AuC (Capitalization in asset under construction):
    This settlement is automatically generated if you enter a capital investment profile with an AuC as its capital investment measure in the order control data.
    Settlement is conducted periodically and in full to the AuC
    PRE (periodic preliminary settlement):
    You can enter PRE rules in the settlement rule for the order. They are used as part of settling capital investment measures.  Depending on the rules you entered, posted debits are settled to the CO receivers or to a G/L account before the periodic settlement.
    It is good idea to do this for particular line items if there are additional costs assigned to a capital investment measure that should not be capitalized. This may be necessary, should you wish to monitor the total costs of the measure in controlling.
    Use
    Note that settlement type FUL permits quantity settlement for primary cost elements only.  You cannot settle quantities to assets.
    Note that you cannot manually create or change a distribution rule with settlement type AUC.  This has the following effect on settlement rule maintenance:
    The required rule is generated from the asset under construction, which is stored in the master data for a capital investment measure, ( order or WBS element)when you carry out settlement for the first time.
    Regards,
    Gangadhar

  • BAPI For settlement rule for IW33 transaction

    hi,
    good day guys
    Iam searching for BAPI for iw33 for settelment rule..but i couldnt get it..
    Settlement rule is nothing but Rule that determines which portions of a sender's costs are allocated to which receivers.
    If you go to iw33 t.code.. give the order numbe and then enter..
    Go to tab--->Settlement Rule..
    plz can anyone tell me which bapi is fit for it...
    Regarsd

    hi,
    try the following BAPI
    BAPI_ALM_ORDERSRULE_CREATE
    hope this helps
    Regards
    Ritesh

  • WBSE Strategy creation for settlement rules

    For Automatcally creation of settlement rules:    I created the strategy for WBSE settlement rules at IMG but idid not find option of superior WBSE in account assignment category field at setting folder.
    can any one tell me why it did not not appear,

    this functionlaity is not standard
    apply note OSS 211324

  • BAPI or FM for settlement rule

    Has anybody an idea how to cretate/update/delete the settlement rules of a production order via BAPI or FM?
    Thanks
    Raadha

    Hello Raadha,
                              You can use the following FM's:-
    SETTLEMENT_RULE_CREATE_OPR
    CO_SD_SETTLEMENT_RULES_UPDATE
    CK02_CO_PROD_GEN_SETTLE_RULE
    Hope thsi answers your question.
    Thanks,
    Greetson

  • Automatic Creation of Settlement Rule for Maintenance Order

    Hi,
    While doing TECO for Maintenance Order, its asking for Settlement Rule. IF I click settlement rule, message is coming as Maintain Settlement Profile with options like With Default, Without Default & Cancel.
    I have maintained the Cost center in Equipment Master. Also I maintained Cost Center as Default Settlement receiver.
    Also I have gone through setting in Automatic Creation of Settlement Rule under Controlling Category.
    But I couldnt understand that. Can you please tell what are the steps to be done?
    Regards,
    Maheswaran.

    Hi,
    Please check the indicatorsin Actual cost/cost sales  and Valid recevivers in settlement profile.
    If for cost center : 1 settlement optional is maintained in valid recevivers and also for order
    and in actual cost/ cost sales: indicator to be settled in full is selected.
    Also check Allocation structure too if you have assigned the valid allocation structure.
    **check if you have assigned the valid settlement profile to order types.
    *****Most important after doing all these settings you need to create new order. for same order you will not get the automatic settlement rule
    Hope this helps.
    Regards,
    PMAddi

  • Check on Settlement Rule in IW31

    Hi,
    I have to keep check on Settlement Rule in IW31. i have to compare the first four characters of Settlement rule with that of Planning Plant. If both are not equal an error message should be raised.
    For example Settlement Rule--->1600009  and if plant = 1500 an error message should be raised.
    Please suggest any suitable BADI or User Exit for this. I have tried many options like CL_EXITHANDLER  for BADIs. But the tables in them are not giving both Plant and Cost Center(Settlement Rule) values.
    Please help.
    Thanks
    K Srinivas

    Have a look at  exit IWO10009
    * get settlement rules from ABAP memory
      call function 'K_SETTLEMENT_RULE_GET'
        exporting
          objnr     = p_caufvd_imp-objnr
          x_all     = ' '
        tables
          e_cobra   = lt_cobra
          e_cobrb   = lt_cobrb
        exceptions
          not_found = 1
          others    = 2.
      if not sy-subrc = 0.
    * if not found, then go to database for settlement rules
        call function 'K_SRULE_READ_ARCHIVE'
          exporting
            i_archive_handle1 = 0
            i_objnr          = p_caufvd_imp-objnr
            i_append         = ' '
          tables
            t_cobra          = lt_cobra
            t_cobrb          = lt_cobrb
          exceptions
            not_enough_info  = 1
            others           = 2.
      endif.
    Make the validations you need.
    Hope it helps, saludos!

  • Automatic Settlement rules generation

    PS Experts
    I need to have automatic settlement rule generation for WBS elements.
    I do have all the config (PS & IM) in place and when i release my WBS element then AUC is automatically created and no settlement rules are generated at this point.
    But when i create FINAL ASSET, then the settlement rules are generated automatically with final asset as the receiver. When i run my final settlement (CJ88) then the settlement rule is updated with AUC & Final asset.
    My question is do i need to have Investment profile to have automatic creation of settlement rules.
    What if i don't want to activate IM and still have automatic settlement rule generation?
    Edited by: Raj M on Apr 17, 2008 8:49 PM

    Hi,
    For automtic settlement rule generation folloowing steps need to be followed.
    1. Determine Strategy for Settlement Rule
    In this there will be settings for settlement rule where we define the recevier cost object after project settlement.
    This strategy will be assigned to project profile
    2. Generate Settlement
    CJB2 transaction need to be run for generation settlement for the WBSE.
    Hope this will help you.
    Regards,
    Rakesh Pradhan

  • Problem to generete settlement rule automatcaly in the WBS

    Hi people,
    Could you help me about the subject below?
    For some reason, when we create a new wbs, it was not created the settlement rule automatcally. ( For the other one it runs OK, only for one WBS it was not ok).
    So we tried to execute the transaction CJB2 to generate the settlement rule.
    We have analysed the Forun and find: http://scn.sap.com/thread/1407279. We try to apply the piece of the change program about the flag ex.: INVMA.
    But when we execute the CJB2 and do the things there is in this forun, the system create the settlement rule with CTR (cost center) instead of FXA (Asset).
    Do you have some suggestion how we can do to create the settlement rule with FXA by transaction CJB2?
    Thanks,
    RN
    ==============================

    Hi RN,
    Check the setting:
    Project System - Costs - Automatic and Periodic Allocations - Settlement - Settlement Rule for Work Breakdown Structure Element - Determine Strategy for Settlement Rule
    Hope it helps.
    Best Regards,
    Owen

Maybe you are looking for