Infoobject for technical level and professionel level

Now, we want to create infoobject for technical level (e.g. high, middle, primary) and professionel level(e.g. high, middle, primary), should we create these kind of infoobject with time dependent, e.g. let's say, last year person A has technical level with middle, but this year start person A was promoted to high level.
1) should we consider about this kind of infoobjects with time dependent?
2) should we make 0datefrom and 0dateto as attr. of infoobject technical level and professionel level?
which idea is correct? Pls share your experience. Thanks!
Edited by: hi ni on Apr 19, 2008 5:37 AM

Hi Nilesh,
For overall release, please tick the overall release indicator for the PR document type.
Path > MM>PUR>PR>Define Document Types. For the particular document type tick the overall release indicator.
This can be done to the particular release group as well
Path->MM>PUR>PR>Release Procedure>Procedure with Classification>Set Up Procedure with Classification. For the particular release group tick the Overall release indicator.
Regards,
Raj

Similar Messages

Please, the battery of my mac air does not last more than two hours, it's been over 30 days I sent for technical assistance and nothing! I am very disappointed with the mac air, I had a very different expectation of apples products!!

Please, the battery of my mac air does not last more than two hours, it's been over 30 days I sent for technical assistance and nothing! I am very disappointed with the mac air, I had a very different expectation of apples products!!!

Maybe the problem is not your MB Air......
Try these:
Make sure bluetooth is turned off if you're not using it.
Set your screen brightness to 4 bars.
See what's loading in your login items. Delete the ones you don't need.
Open Activity Monitor - under All Processes see what's using most of your CPU's resources.
Highlight the ones with the highest %CPU and hit quit process.
Remember that when Apple says that your battery should last 7 hours, they tested it just browsing the web and not have anything open in the background and screen is set at 50% brightness.

No standard infoobject for fisacal quarter

Hi Experts,
I have a requirement that have to get fiscal quarter by using ofiscper(Fiscal Year/period). I didn't find any standard infoobject for fiscal quarter and my fiscal variant is V3. Please suggest me how to get fiscal quarter values.
Regards,
RAJ

Hi,
You can use the below code to convert the Fiscal year to Quater.
a = 20090101.
b = 00000300.
c = 00010000.
d = c + 03.
e = sy-datum+2(2).
types : begin of itab,
      low type sy-datum,
      high type sy-datum,
       end of itab.
data : itab1 type standard table of itab,
       wa_itab1 type itab.
while e GE 09.
*do 2 times.
do 4 times.
case a+4(2).                " month? 2010 11 01
    when '01' or '02' or '03'.
      concatenate   a+0(4) '0101'
      into wa_itab1-low.
      concatenate   a+0(4) '3103'
      into wa_itab1-high.
      append wa_itab1 to itab1.
     a = a + b.
    when '04' or '05' or '06'.
      concatenate a+0(4) '0104'
      into wa_itab1-low.
      concatenate a+0(4) '3006'
      into wa_itab1-high.
      append wa_itab1 to itab1.
       a = a + b.
    when '07' or '08' or '09'.
      concatenate a+0(4) '0107'
      into wa_itab1-low.
      concatenate a+0(4) '3009'
      into wa_itab1-high.
      append wa_itab1 to itab1.
       a = a + b.
    when '10' or '11' or '12'.
      concatenate a+0(4) '0110'
      into wa_itab1-low.
      concatenate a+0(4) '3112'
      into wa_itab1-high.
      append wa_itab1 to itab1.
     a = a + b.
endcase.
a = a + b.
enddo.
a = 20090101.
a = a + c.
*enddo.
e = e - 1.
endwhile.
Hope this is helpful.
Thanks,
Saveen Kumar

Changes in functional and technical level on upgrading from SAP ECC 5.0 to ECC 6

Hi Friends,
Need help with the below mentioned questions
What will be the changes in Functional level while upgrading for ecc 5.0 to ecc 6.0?
What will be the changes in Technical level both Abap and Basis?
What will be the changes in Server Hardware level in Upgrading of Servers (Solution Manger,IDES,Dev Server,Prod Server)?
What is change in SAP License level?
Total cost of Project development and Support .
please help me as I need to answer some body .
Thanks in Advance

It seems that you have a combined upgrade - ABAP + Java in your system - is that right? If yes, did you start the Java upgrade in parallel?
Markus

Hi, how can I keep the same zoom level for all the pages I view in Safari and even when I close and open it. Indeed with a 27 inch Imac I have a lot of space, most of the websites are built for smaller resolutions and my sight is dropping !   Thx

Hi, how can I keep the same zoom level for all the pages I view in Safari and even when I close and open it. Indeed with a 27 inch Imac I have a lot of space, most of the websites are built for smaller resolutions and my sight is dropping !   Thx

Hi, how can I keep the same zoom level for all the pages I view in Safari and even when I close and open it. Indeed with a 27 inch Imac I have a lot of space, most of the websites are built for smaller resolutions and my sight is dropping !   Thx

Custom program for availability check and update for existing sale order at Item level(VA02)

Hi,
I came to know Bapi_Saleorder_Simulate can be used for availability check and update an existing sale order.but there is no sample program explaining the process.I have tried this by passing parameters ORDER_HEADER_IN , ORDER_ITEMS_IN ,ORDER_PARTNERS and ORDER_SCHEDULE_EX(for getting details),also i have assigned the sale document number ,custom document type(ZSO) in ORDER_HEADER_IN . while executing the BAPI I am getting the error external number range is not assigned for the document type ZSO . I am confused on seeing this error. It is possible to do availability check for existing sale order using this BAPI. Please explain how to achieve this.It will be really helpful if it is expalained with an example.
Regards,
Shanmuga

Hello, I think you may have been misinformed about this BAPI updating a sales order at item level. As far as I understand it this BAPI can be used to simulate the creation of a sales order which obviously would include and ATP check. This is why it is giving the error because it is simulating creation but you are entering a value in a field that should be automatically generated (i.e. the sales order number). For change the sales order at item level have you looked at BAPI_SALESORDER_CHANGE? I pretty sure this BAPI both updates sales order (header or item level) and can do an ATP first.
Points are always welcome if you feel an answer has been helpful.

Why such sorry sound quality on iTunes? On some of my purchases the sound level is suppressed on the audio. On others the volume is so low that if I have it set for another song and a new one starts I have to increase the volume to hear it.

Why such sorry sound quality on iTunes? On some of my purchases the sound level is suppressed on the audio. On others the volume is so low that if I have it set for another song and a new one starts I have to increase the volume to hear it.
There is so much distortion on some of the music I have to play it with QuickTime to get a "clean" track.
What can be done to get a consistent volume level or is this another typical Apple product that you have to take what you get and be happy because it's not a Microsoft product?

If that's the best you can do why don't you get on another forum?

Aggregation table - Diffrent agg levels for base table and agg table

Is it possible to have Different aggregation level for base table and Aggregation. Say sum on a column in AGG table and Count for the same column in Fact table.
Example
Region,Day_product,sales person, customer are dimensions and Call is a fact measure
FACT_TABLE has columns Region, Day, Product, Sales person,Customer, Call
AGG_TABLE has columns Region, Month,Product, call
We already have a Logical Table definition for the fact table say FACT_CALL
We have a Logical column called No of customers.
For the Data source as FACT_TABLE Formula for the column is "Customer" and Aggregation level is count distinct.
But agg table we already have a calculated column call TOT_CUSTOMERS. which is been calculated and aggregated in the ETL.
IF we map this to the logical column we have to set the formula as TOT_CUSTOMERS and we need to define aggregation type as SUM as this is at REGION, MONTH AND Product level. But OBI does not allow to do so.
Is there a work around for this? Can you please let us know.
Regard
Arun D

The way BI server picks up the table that would satisfy the query is through column mappings and contents levels. You have set the column mappings to TOT_CUSTOMER, which is right. When it comes to aggregation, since its already precalculated through ETL, you want to set the aggregation to SUM. Which I would say - is not correct, you can set the aggregation to COUNT DISTIMCT which is same as that of the detailed fact. But set the content levels to month in date table, and appropriate levels in region etc., So now BI Server will be aware of how to aggregate the rows when it chooses the agg table.

What is prereq for reading above, and for start develop/reading with flex and cf(level?) ?

http://www.adobe.com/devnet/flex/pdfs/getting_started_with_Flex3.pdf
what is prereq for reading above, and for start develop/reading with flex and cf(level?) ?

The Flex Quickstarts will be a place for starters, if you want to know
about Flex/CF integration the first to know would be some basics of CF.
Sincerely,
Michael
Sent from my iPhone

Prgrmatic viewlink setting for hgrid is working for one level and not remai

Hi All,
I have create 2 VO objects dynamicaly and created 2 VL's dynamically .I have a static HGrid.and iam setting viewlinks dynamically.It is working for 1 level but not another leve..For Example.. Grid id displaying projects to Tasks but not tasks to subtasks.
here is my code
public void createViewLink(){
OADBTransaction dbTransaction=getOADBTransaction();
OAViewObject obj = (OAViewObject)this.findViewObject("TestProjects1VO1");
OAViewObject obj1 = (OAViewObject)this.findViewObject("TestTasks1VO1");
AttributeDef[] prjLinkAttrs = new AttributeDef[] { obj.findAttributeDef("ProjectId") };
AttributeDef[] taskLinkAttrs = new AttributeDef[] { obj1.findAttributeDef("ProjectId") };
ViewLink vl = createViewLinkBetweenViewObjects("TestPrjToTestTasksVL","TestPrjToTasksAcc",
obj,prjLinkAttrs,obj1,taskLinkAttrs,null);
//OAViewObject obj3 = (OAViewObject)this.findViewObject("TestTasks1VO1");
OAViewObject obj2 = (OAViewObject)this.findViewObject("TestRecTasks1VO1");
AttributeDef[] taskAttrs = new AttributeDef[] { obj1.findAttributeDef("TaskId") };
AttributeDef[] parentTaskAttrs = new AttributeDef[] { obj2.findAttributeDef("ParentTaskId") };
ViewLink vl1 = createViewLinkBetweenViewObjects("TaskToTestTasksVL","TaskToTasksAcc",
obj1,taskAttrs,obj2,parentTaskAttrs,null);
OAHGridBean hgrid=(OAHGridBean)webBean.findChildRecursive("HGridRN");
OAHGridHierarchyBean hgridHierarchy = (OAHGridHierarchyBean)hgrid.findChildRecursive("TreeRN");
OATreeLevelBean treeChild = (OATreeLevelBean)hgridHierarchy.findChildRecursive("TreeRN");
OAWebBean nodeDef1 = (OAWebBean)treeChild.findChildRecursive("nodeDef1");
nodeDef1.setViewUsageName("TestProjects1VO1");
nodeDef1.setViewAttributeName("ProjectName");
OATreeChildBean childNode1 = (OATreeChildBean)treeChild.findChildRecursive("childNode1");
childNode1.setAttributeValue(VIEW_LINK_NAME,"TestPrjToTestTasksVL");
childNode1.setAttributeValue(VL_ACCESSOR_NAME_ATTR,"TestPrjToTasksAcc");
OAWebBean nodeDef2 = (OAWebBean)childNode1.findIndexedChild(childNode1,"nodeDef2");
nodeDef2.setAttributeValue(VIEW_USAGE_NAME, "TestTasks1VO1");
nodeDef2.setAttributeValue(VIEW_ATTRIBUTE_NAME,"TaskName");
%%%%%%%%%%%%%%%Till Here grid is getting data%%%%%%%%%%%%
This node is not getting data............i.e sub tasks are not getting data
OATreeChildBean childNode2 = (OATreeChildBean)childNode1.findIndexedChildRecursive("childNode2");
childNode2.setAttributeValue(VIEW_LINK_NAME,"TaskToTestTasksVL1");
childNode2.setAttributeValue(VL_ACCESSOR_NAME_ATTR,"TaskToTasksAcc");
OAWebBean nodeDef3 = (OAWebBean)childNode2.findIndexedChild(childNode2,"nodeDef3");
nodeDef3.setAttributeValue(VIEW_USAGE_NAME, "TestRecTasks1VO1");
nodeDef3.setAttributeValue(VIEW_ATTRIBUTE_NAME,"TaskName");
Please help me .. ihave spent my whole daya on this issue.
Thanks
Soujanya

Sure Sumit.
OADBTransaction dbTransaction=getOADBTransaction();
OAViewObject obj = (OAViewObject)this.findViewObject("TestProjects1VO1");
OAViewObject obj1 = (OAViewObject)this.findViewObject("TestTasks1VO1");
OAViewObject obj2 = (OAViewObject)this.findViewObject("TestRecTasks1VO1");
// OAViewObject obj3 = (OAViewObject)this.findViewObject("RecTasks1VO1");
AttributeDef[] prjLinkAttrs = new AttributeDef[] { obj.findAttributeDef("ProjectId") };
AttributeDef[] taskLinkAttrs = new AttributeDef[] { obj1.findAttributeDef("ProjectId") };
ViewLink vl = createViewLinkBetweenViewObjects("TestPrjToTestTasksVL","TestPrjToTasksAcc",
obj,prjLinkAttrs,obj1,taskLinkAttrs,null);
AttributeDef[] taskAttrs = new AttributeDef[] { obj1.findAttributeDef("TaskId") };
AttributeDef[] parentTaskAttrs = new AttributeDef[] { obj2.findAttributeDef("ParentTaskId") };
*************This cide was missing ...********************************
/* Retrieve the first row of the master rowset */
Row firstDept = obj.first();
/* Get iterator over details collection via the view link accessor attribute */
RowSetIterator empsInDeptRowSet = (RowSetIterator)firstDept.getAttribute("TestPrjToTasksAcc");
/* Get view object created by the framework to handle view link traversal */
ViewObject viewObjectForAccessorRowSet = empsInDeptRowSet.getRowSet().getViewObject();
/* Now, create the 2nd-level detail between this view object, and reports */
*************This cide was missing ...********************************
ViewLink vl1 = createViewLinkBetweenViewObjects("TaskToTestTasksVL","TaskToTasksAcc",
viewObjectForAccessorRowSet ,taskAttrs,obj2,parentTaskAttrs,null);
I the above vl1 i gave obj1 before .. that was the difference...BAsically using the accessor ... if we give as source for next levevl .. it worked.
Both ViewLinks were separate and now there is a link ............ :)
Now iam facing problem for recursion ......... :)
Soujanya

OCM for Revesion level in the Material Master and for the BOM

Hello,
I use My SAP 6.
I have implemented OCM. It's used for 2 things:
- The first is for revision level in the Material Master.
- the second is for the BOM.
Today, the customizing is good, it's work.
My need is to have the same change number for those 2 evolutions: for the material master evolution and for the BOM evolution.
It's possible, and how?
Thanks for your answers.
Bérenger

I do not think this is possible. Service level is usually used for safety stock planning.

PR workflow for item level release (stock and non-stock)

Hello gurus,
I am not getting the agents.!!
I am creating a workflow for pr( item level release)..and using standard wf WS00000038 for this, as the standard wf contains the simple release procedure only but i have to add some custom steps to it, so i have copied this wf as custom wf .
In this wf i have to fetch the agents based on the "stock" and "non-stock items".
so i have maintained strategies and release code like:
i have maintained two strategies W1(non-stock) and W2(stock)..and release code for W1 are P1 and P2..here P1 i have given for my first level of approval and P2 for second level of approval.
The release code for W2 are P3 and P2..first level is P3 and second is P2.
so what i have did in a workflow , started with a condition step where i have given "releasecode = p1".. if yes than than it will go for getting approval from p1 , in this activity i am using standard rule 157.
The main thing is 1). i am not getting how to fetch agents using standard rule. 2)and how and where to define next level of approval for both stock and non-stock.
means by using condition step in the starting i am dividing workflow in two parts stock and non stock but how to proceed next.
i am really confused. should i use rules or write my own methods. please if anybody has gone through the same scenario than please suggest some points. i will really appreciate the help.
Kind Regards.
Himanshu

Hello HIM Joshi !
                   Include the task TS00007986 and all its branches and in a loop and loop around it for two times.When the loop goes for the first time, it should pick the first agent and during its second iteration, it should pick the second agent.
                   To accomplish so, In the same loop, but before the above task , include a background task which should populate the agent ids depending on stock and non-stock details and pass it to the the task TS00007986
                   That's all.
Regards,
S.Suresh

Interveiw question for AD L3 and L4 level

Hi
I have asked below question in AD L4 interview question in one company?
What is disaster recovery in AD, any example?
What can be reason of user slow authentication in Domain for 1 site for multiple users and how can we check it from DC side.
Can i get more Question and answer for AD L3 and L4 level?

Hi
I have asked below question in AD L4 interview question in one company?
1.What is disaster recovery in AD, any example?
How to perform a disaster recovery restoration of Active Directory :http://support.microsoft.com/kb/263532
Active Directory Disaster Recovery:http://windows.uwaterloo.ca/server/disaster/ms_docs/disaster.htm
2.What can be reason of user slow authentication in Domain for 1 site for multiple users and how can we check it from DC side.
This could be due to dns misconfig,GPO causing the slow logon,health of dc is not good,Ad sites and service not set correctly etc.
Can i get more Question and answer for AD L3 and L4 level?
Hi,
See my line comments.Apart form interview question you need to create test lab and test the domain env.There are the infrastructure planning and design guides whci may be helpful to you.
http://www.microsoft.com/downloads/details.aspx?FamilyId=AD3921FB-8224-4681-9064-075FDF042B0C&displaylang=en
Hope this helps
Best Regards,
Sandesh Dubey.
MCSE|MCSA:Messaging|MCTS|MCITP:Enterprise Adminitrator |
My Blog
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

How to load Cj01 create project for WBS level 1,2 and 3

Dear All
I want to load the project for WBS element.I had used IDOC project01 for the same but I am getting error as 'SaveReplica'method was not called up via ALE.I am presently trying with LSMW recording for tcode CJ01 in order to populate the
wbs levels 1 ,2 and 3 since the hierachy is not fixed i:e there is no limit as to how many 2 or 3 wbs levels are there so how shall i proceed with recording.If any body has migrated Projects for WBS elements please do share me.In my recording i am getting error 'Do not enter a level greater than 2'.is it that i have to carry t recording for each level seperately.
Tried with Bapi Bapi_project_maintain and all Bapis related to it most of the cases i am getting
error as to no initialization created though having executed Bapi_Ps_Initialization.
Regards
Somnath

Hi Somnath,
The BAPI, BAPI_PROJECT_MAINTAIN should work for any levels of requirement..and you dont need to initialize it. First, go through the documentation given in the SE37 transaction code. It will explain all. Just concentrate on the reference number. If you see in the example given there, two wbs elements are being created.
Then you have to use methods like create,save...unlike other BAPI's.
Just go through the documentation once.
Regards,
Vishwa.

Different Sound Levels For Key Pad And Incoming Ca...

I have a Nokia Lumia 520.
How do I set the volume differently so that I have:-
A quiet tone (say level 1/30) when I type numbers into the key pad for dialling numbers AND
a louder ring tone for incoming calls (say level 15/30).
Thanks in advance for any replies.

garym11 wrote:
trip_to_tokyo wrote:
I don't find a, "read the manual" a helpful answer.
I did NOT give the link to the Users Guide as an answer to your question!!
I gave it as another source of information for you to learn more about your phone.
I gave step by step info. Try it.
Some people appriciate the help they get here, some do not.
As far as I can see your proposed solution:-
What do you want to do?
To turn off keypress sound?
tap settings > ringtones+sound > uncheck 'key press' in 'play a sound for'
- fails testing for the following reasons:-
1. There is no:-
play a sound for
- option in the:-
ringtones+sounds
- list which appear as follows in my screen:-
SETTINGS
ringtones + soun
Ringer
Off
Vibrate
Off
Ringtone
Macro
get more
New text or IM
Nokia message
New voicemail
Nokia email
2. I am not trying to:-
To turn off keypress sound?
3. What I am trying to do I have already stated in my first posting:-
How do I set the volume differently so that I have:-
1. A quiet tone (say level 1/30) when I type numbers into the key pad for dialling numbers AND
2. a louder ring tone for incoming calls (say level 15/30).
Thanks in advance for any replies.
Attachments:
nokia_lumia_520_issue_two_1.docx ‏13 KB

Infoobject for technical level and professionel level

Similar Messages

Maybe you are looking for