InfoObject  for Timestamp field??

Hi Guru's,
               I'm creating a view for a generic datasource which will feed a DSO. The table I'm extracting data from has a timestamp field. I need help to find out which I/O should I use to map this field in BI. Thanks a lot.

Hi Akash,
We resolved this problem by creating a generic datasource and populating it via a simple function module.
Regards,
Payal.

Similar Messages

  • Finding InfoObjects for DS Fields

    hello friends
    I have tried to map the DS fields to InfoObjects in RSOSFIELDMAP table, but i am unable to find the InfoObject mapping for the following fields
    MB_GRUND, BMSCH, USE04, USR04, VGW03. these fields are present in the standard DS for PP.
    How do i find the relevant info objects for the above fields?
    Do let me know ur comments
    Regards
    Rohit

    Hi,
    You can also search in <b>RSOSFIELDMAPSH</b>.
    I got InfoObjects for two fields from this table.
    USR04     0ME_USR5
    USE04     0ME_USR5UNT
    Regards,
    Suman

  • Using a single master data infoobject for multiple fields

    Hello experts. Today I ran un with the following problem: I am modelling an Infocube and will be receiving a flat file with several fields, of which 3 of them give information about sales representatives.
    For each transaction there are 1-3 sales representatives involved, and this is reflected in the file I am going to be loading. If only one representative is involved, it means that he was in charge of a complete negotiation, and his code will be found in all three fields, if two representatives are involved, it means that one was in charge of one part of the negotiation, while the other was in charge of the rest, and according to what they were in charge, their code will appear in one or two of the fields. If three representatives are involved, each one's code will appear on the field corresponding to the part of the negotiation they were in charge of handling.
    I already have the sales representative's codes as master data, but I was wondering how I can have those three fields map into the same InfoObject, if that is possible at all. Maybe in the transformation I map them to the same object? Also, what happens when you create the Data Source? As far as I know, each field in the Data Source must be unique, which makes it impossible to use my ZSALESREP InfoObject for the three fields, at least at Data Source level. What can I do in this case?

    Hi  Pedro Olvera,
    You need 3 infoobjects in datasouce to load 3 different fields.
    If you want load to a single infoobject, you can map accordingly in transformation, bult last field overwrites previous one.
    Its better to maintain 3 fields in cube. Create 2 more sales Reps(ZSALESREP1 & ZSALESREP2) with Reference to ZSALESREP then you no need to maintain master data for ZSALESREP1 & ZSALESREP2.
    Use these 3 fields for modeling.
    Hope it Helps
    Srini
    [Dont forget to close the call by assigning poings.... - Food for Points: Make a Difference through Community Contribution!|https://www.sdn.sap.com/irj/sdn/index?rid=/webcontent/uuid/007928c5-c4ef-2a10-d9a3-8109ae621a82]

  • Finding InfoObject for DS Fields

    hello friends
    I have tried to map the DS fields to InfoObjects in RSOSFIELDMAP table, but i am unable to find the InfoObject mapping for the following fields
    MB_GRUND, BMSCH, USE04, USR04, VGW03. these fields are present in the standard DS for PP.        
    How do i find the relevant info objects for the above fields?
    Do let me know ur comments
    Regards
    Rohit

    Hi,
    i Checked above fields... not aviable in this datasorce...
    Display the data source and find the Extract Structure name (starts with MCMC04P_0MAT). Go to SE11 and append the structure and add the fields that you want to add there. Check and activate and the new fields will be available now
    or..
    otherwise..
    Go to enhancement... in Lo enhancement
    give me ur id... i will send document..
    Hope this help... assign points...
    Regards,
    raj
    Message was edited by:
            gangaraju mullapudi

  • Infoobject for ASTKZ field

    Hi experts,
    I have added the fiels ASTKZ (Identifier for statistical order) on IS 0COORDER_ATTR.
    I Have to assing it a InfoObject but i cannot find an standard one. Is there any one standard I can use without problems or is it better to create a Z one?
    Thanks!!

    Hi
    Check the table RSOSFIELDMAP with field name ASTKZ. if you find any standard info object, you can use that.
    If you unable to find any thing, you can go with creating Z object as per your requirement.
    Regards,
    Venkatesh

  • Data not loading for new Fields InfoObjects from DSO to InfoCube

    Hi Gurus -
                   I have a DataSource that is providing data to existing DSO then to Infocube. My client asked me to added couple fields to DataSource and get the data to DSO and then DSO to InfoCube.
    Here is the Old scenarion:   DataSource -> DSO -> InfoCube.
    Here is the New Scenation:
         DataSource ( Added new fields) -> DSO (added new InfoObjects for Corresponding DataSource FIelds) -> InfoCube( Added new InfoObjects to mapped from DSO)
    I added the new fields to DataSource, added the corresponding InfoObjects to DSO and InfoCube.
    I successfully loaded data from DataSource to DSO. Data is populating for the new Fields/InfoObjects in DSO.
    But when I load data from DSO to InfoCube, I don't see any data for New Fields InfoObjects in the InfoCube.
    Data from DSO to InfoCube is loading fine for the Old InfoObjects Fields but not for the New InfoObjects I added in InfoCube.
    -Sonali

    Hi,
    Why dont u debug the load through DTP debugging and check what happens to the source field and target field once it passes through the transformation. You can easily trace back where the fields are becoming blank.
    The loads which you have mentioned earlier did it have values in Added Records/Transferred Records column for the cube.
    Regards,
    Mani

  • NEED STANDARD INFOOBJECTS FOR STANDARD R3 FIELDS?

    HI ALL,
    RESBU
    BRESWK
    BRTWR_R
    BSAKZ
    EGLKZ
    EMNFR
    KTWRT
    KZKPF
    KZKPO
    MEPRF
    MPROF
    NETWR_R
    PRDAT
    REVNO
    STAKO
    STAPO
    The above are R3 Fields, i have taken it from datasource (2LIS_02_ITM), I Just want to know the standard infoobjects used for the above said fields.
    Is there any way to get the standard infoobjects for the above fields?
    Please Help.

    Hi
    1. Goto SE11 of R3 and give RSOSFIELDMAP
    2. Click on contents icon of the table and give the R3 fields names against the field
    3. Execute it and the table will list out the corresponding info objects and the data source.
    Hope it helps
    Regards
    Sadeesh

  • TIMESTAMP field is not available in BW for the datasource 3FI_GL_P1_SI

    Hello,
    We have created a datasource 3FI_GL_P1_SI using transaction FAGLBW03 for the Regulatory Ledger i.e. P1.
    Now, when we check data in RSA3, we see that the TIMESTAMP field is available. This field is not hidden. When we replicated this datasource in BW, the TIMESTAMP field is not present. Has anyone faced such issue before?
    One more issue with this datasource is that, though the TIMESTAMP field is present in R/3, its data is not correctly populated.This field should store the data in the format (YYYYMMDDHHMMSS) but it stores the hexadecimal data. However, when we check the data of the datasource 0FI_GL_14, the data is correctly populated. Could you please let us know how to overcome these issues?
    Thanks and Regards,
    Nitin Chopade.

    Hi,
    In RSA6 check the selection option then try to replicate and Activate....
    Regards,
    Satya

  • Difficulty finding BW infoobjects for corresponding R/3 fields

    Hello Guys
    I have enhanced an extractor 2LIS_13_VDKON, in LBWE ( LO Cockpit ). I added some new ( standard ) fields to the extract structure in the "Maintanence" tab. I also made sure that the fields were not "hidden" in the "data source" tab. Then I activated the extractor, checked in RSA6 for the new changes, and replicated this extractor in BW.
    Now, I need to find corresponding standard infoobjects ( delivered or active ) for these R/3 fields to map them. How do I find these infoobjects in BW?
    I have tried the following: Used tables RSOSFIELDMAP, ROOSFIELD etc. No help.
    I need to find infoobjects to a total of 45 R/3 new ( but standard ) fields.
    Please advise.
    Thanks in advance.

    Hi Sudheer
    I have a total of 150 fields that I have to map the infoobjects with. Dont u think its a tiresome job to find an infoobject for each of them manually, one by one.
    Dont u think there must be an easy method to do this ?
    Please advise.
    All these fields are a part of the standard extractor right, so there must be standard IO's in the business content ( mostly under delivered status ), we just need a method to trace them.
    Thanks.

  • Infoobject for an R3 field

    Hello all.
    Is there any way (table, transaction...) to find an infoobject in BW for a R3 field??
    I want to know if there is an infoobject for fields: KTOSL, VORSN, BUSTW and AWTYP from BSEG table..
    Thanks and best regards,
    Alfonso.

    Hi dear and welcome on board !
    Usually, if you don't find anything by searching in help on line, you have to look if there is something similar by comparing domain, lenght...but, in this case, it's better to create your own infoobjects !
    Anyway, try to search if these fields are used by some datasource (in R/3, ROOSFIELD table) and then verify if in BW (RSOSFIELDMAP table) you have related infosource with infoobject mapping !
    Hope it helps!
    Bye,
    Roberto
    ...and please don't forget to reward the answers...it's THE way to say thanks here !

  • Problem with selecting from timestamp field for a particular date

    We're running 10g and we have a timestamp field whose values look like this:
    SQL> select timeinserted from files where rownum < 3;
    TIMEINSERTED
    16-APR-05 01.08.35.97634 PM
    16-APR-05 01.16.10.00419 PM
    SQL>
    I'm trying to run this query, but it returns no rows even though I know there should be some:
    select timeinserted from files where timeinserted = '27-MAY-05';
    I know I just need to somehow tell it to convert the timestamp to date or something like that. How should I rewrite this query? Thanks...

    select timeinserted from files where timeinserted = '27-MAY-05';
    this is poor coding, you compare a date with a varchar2. Not to mention using 2 digits years...
    try something like
    select timeinserted from files where timeinserted >= to_timestamp('27-MAY-2005', 'DD-MON-YYYY') and timeinserted<to_timestamp('28-MAY-2005', 'DD-MON-YYYY');

  • Timestamp Field in ALV Grid

    Hi
    I have a field for timestamp (CHAR 14) in an editable ALV.The Conversion Exit i have used is TSTPS. If I enter a non-numeric character into that field , it gets cleared but no error is generated.However , I want to display an error if the user attempts to do so or do not allow the user to enter those characters at all.
    Thanks
    Shilpa

    Hi
    I have a field for timestamp (CHAR 14) in an editable ALV.The Conversion Exit i have used is TSTPS. If I enter a non-numeric character into that field , it gets cleared but no error is generated.However , I want to display an error if the user attempts to do so or do not allow the user to enter those characters at all.
    Thanks
    Shilpa

  • F4 help for custome field

    Dear All,
    I have created one 'Z' InfoObject for some characteristic and i am using the same in mandatory selection parameter for query also. Now this query run monthly only and accordingly data will be loaded and manipulated. So when i choose F4 for that Z field it will show data only for that month but client wants the complete list of Z fields in F4 for paticular fiscal year.
    How can i achieve this?
    Regards,
    SS

    Hi,
    In the infoObject definition (in RSA1) go to the Business Explorer tab.
    There in the General Settings you have an option 'Query Execution Filter Val. Selectn'. This field describes how the selection of filter values functions when a query is executed.
    Here select the 'Only values in infoProvider' option.
    Now run your query and try.
    Hope this helps!
    Regards,
    Saurabh

  • How can I create an index on the date part of a timestamp field?

    is there a way I can create an index on the date part of a timestamp field?

    LONGENECKER wrote:
    Idea:
    If you find no direct command that allows you to create an index on JUST the date portion of a timestamp datatype column then I recommend you consider splitting date and time into two seperate columns.
    If date is column "A" and time is column "B" then you can concatenate them using a view or virtual column (in 11G) to re-assemble them at run time.
    In the solution I describe above you might trade ease of management for better performing queries.
    Additional Info:
    This thread may be of some value.
    Can we create INDEX on TIMESTAMP column???
    And what datatype do you propose for your columns A and B? The only proper datatypes would be DATE or TIMESTAMP. Both of these inherently carry both date and time components, so that would have to be dealt with anyway. The use of any character or number datatype to hold date and/or time should be treated with an application of Billy's lead pipe.
    Perhaps function based indexes would be a better solution.

  • Storing the Timestamp field in the Table

    Hi
    I have a Z program and we need to store the timestamp field in the Z table . I have created the table with the dataelement
    TIMESTAMP . Is there any system field that can be used to store the timestamp field from your program
    say for example we have declared a work area of the structure of the Z table and Appended through the Internal Table and Modified that Z table.
    My intention is store the Timestamp field in the Z table.
    Nadesh

    Hi,
        you can add as below..
    types : begin of st_output.
                             include structure ztaxinvoice.
                             FKIMG1 TYPE VBRP-FKIMG,
                             FKIMG2 TYPE VBRP-FKIMG,
                             types : end of st_output.
        or you can add this field to your structure 'ztaxinvoice'  as below
    'FKIMG1 TYPE FKIMG'
                                       'FKIMG2 TYPE FKIMG'
       Then you can declare internal table and work area as mentioned below..
    data: it_output type standard table of ztaxinvoice,
                            wa_output type ztaxinvoice.
    here in this case no need of types declaration also you can pass the same type (wa_output type ztaxinvoice) in smartform.
    hope this will help you,
    Regards,
    Renuka S.

Maybe you are looking for