Infoobject in infoset but not displaying in query designer

Hi,
I have created a query on infoset(ods1 & ods2).
a custum defined infoobject (fiscyr) is not displaying in query designer while it is present in infoset.
pls give your inputs,for why this infoobject is not available in query designer.
Thanks
Radika

Hi Radika,
I cannot think of anything other than the solutions already mentioned in this thread (checking the IOBJ in infoset, running RSISET and activating it). I just had a foolish idea that you might not be looking for the right IOBJ. All the IOBJs from an infoset are not displayed with their original technical names in the query designer. They are disdplayed in the format: <infoset_technical_name>_FXXXXX where XXXXX is a number.
Also try one more thing. Go to transaction RSISET and type in the technical name of the infoset there.
Right below the box where you type the Infoset name is a check button. Check your Infoset there and then activate it from within the RSISET transaction (the activate button is right after the check button). With Infosets, sometimes just activating it from within RSA1 does not work but RSISET always seems to work.
Do this and see if it helps.
Thanks & regards,
Nikhil

Similar Messages

Key Figure Attribute not displaying in Query Designer

Hello Experts,
I have an InfoObject which has Key Figures as attributes. When creating a query I <b>once</b> was able to see these Key Figure attributes in the Query Designer. Howerver, recently I am not able to see them anymore in our DEV environment.
In our QA and PROD environment I am to see these Key Figures attribues in Query Designer. Is there a setting that I am overlooking? We are currently on BW 3.5 with SP 19.
Please help!
Thanks in advance,
BQ

Hi Jaya,
Thanks for the quick response. But how to I check the authorization for 1KYFNM and what am I looking for?
Thanks,
BQ

VALUE CREATED, but not DISPLAYED IN QUERY

Hi dear all,
I have created a value under InfoObject A by going to RSA1.
Now while creating a Query, i have to use this value.
But this created value is not seen under that Navigational attribute,
B__A
What shud i do???
Need Help..
Thanks,
Sowrabh

When you right click on the Charachteristic and say restrict. You are not able to find the new value. Is this your issue??? try the folloiwng.
In 3.5
Right Click on the Characteristic and say restrict and go to fixed values.
At the Bottom you can see a Display Other Valu Option(Yellow-green Colour Arrow)
Click on that. this opens a new window.
In this Window uncheck the Only Values From infoprovider
Also uncheck the Authorized Values Only Checkbox
Also Set the Number of Displayed Values to All
Now Click OK. This will show you all the values for that particular Characteristic.
In 7.0
When u restrict a Charachteristic, u will see an option called Setting which is on top
When u click on that it will open a new Window . In that window, select value restrictions.
in that select the Radio Button All values And Read Mode Setting as Values in Master data.
Thsi will give you all the values

Updateable Report/Pagination - rows found but not displayed

Bear with me if there is a post that covers this, as the SEARCH facility seems to be hanging when I search on Pagination.
I have a SQL Query (PL/SQL Function Body Returning SQL Query) which creates an Updatable Report.
If I run the Query and the selection criteria results in more than one page in the "search results" and then I go to page 2 or page 3, etc and then peform another search that only results in 1 page of "search results", the actual search results will not display, but the pagination will show the number of rows that should be displaying.
For example, I search on Coroner "John Black", which returns 55 rows. The first 50 are displayed. The next 5 are on page 2. If I then searchon Coroner "Jim Bean", 22 rows are returned (all on page 1). If I then search on "John Black" again, and this time, go to page 2 (to see the final 5 rows in the result set) and then search on "Jim Bean", I won't get any data in the report for Jim Bean, but a message showing that there are 22 rows of data. However, I cannot get that data to show (even if I select NEXT or PREVIOUS for the pages.
Then if I go back and select on "John Black", get the same problem. I basically have to sign out completely in order to get this reset.
Note that the problem occurs if you are on a page greater than that of the result set on the next query. For example, if I am on page 3 of 5 pages and perform another selection that has 3 pages, it is fine. But if the result set only has 2 pages, the form becomes confused.
If the "Layout and Pagination" has a "Pagination Scheme" set to "Row Ranges X to Y of Z (no pagination)" I get an error like "Minimum row requested: 2401, rows found but not displayed: 46".
If I use "Row ranges 1-15 16-30 (with set pagination)" I get "1-46" as a hyperlink, which if I click on, will show me the report.
If I use "Row ranges 1-15 16-30 in select list (with pagination) I have a problem.
If I use "Row Ranges X to Y (no pagination) I have problems.
If I use "Row Ranges X to Y of Z (no pagination) I have problems.
If I use "Row Ranges X to Y of Z (with pagination) I have problems.
Basically, the one one that seems to work is those that have a hyperlink. Uing NEXT, PREVIOUS or a select list does not seem to work.
Do you know what is causing this problem?

I have the same issue, but cannot resolve it following above suggestions. I have a report page with search criteria and a "Go" button to submit the search. The branch back to the same page has "reset pagination for this page" checked, but still if run a query that returns just one row after having paged forwards, I get no rows displayed and a pagination link "1-1" that when clicked brings up the selected row.
I tried adding a "Reset Pagination" process to run on submit (unconditionally), and it made no difference.
I am using HTMLDB 2.0.

I create trigger but not display massage after insert in oracle 10g

I create trigger but not display massage after insert in oracle 10g
**CREATE OR REPLACE TRIGGER TableName**
**AFTER INSERT OR DELETE OR UPDATE ON test**
**BEGIN**
**if inserting then**
**dbms_output.put('Message');**
**end if;**
**END;**

What user interface are you using?
If the tool doesn't support the SQL*Plus syntax (set serveroutput on), it probably has an option somewhere to enable DBMS Output. Not even knowing what tool you're using, it's impossible for us to guess where that option might be configured.
As others have suggested, using DBMS Output to test code is less than ideal because you're dependent on the application you're using to display it to you and not every application can or will do that. If you want to use DBMS_Output, you may need to switch to a different GUI (SQL Developer or SQL*Plus are both free utilities from Oracle). Otherwise, you'd probably be better off having the trigger do something that you can subsequently query (i.e. write a row to a log table).
Justin

Customer number is not displayed at Query

Hi to all,
I have created a query where i need to display the Receivables aging Report.
when i check data at Cube level data is coming properly for Every Customer.
but when i filter customer at Query level data is not displayed at query level.
Please can any one provide me solution.
i shall be thnakful to you for this.
Regards
Pavneet Rana

Thanks for Reply,
For some customer i am getting correct data, and for some customer i am not getting any data at Query level,
although correct data exist for every customer at CUBE level.
Regards
Pavneet Rana

Spouse, Children fields from Outlook - syncing, but not displayed

I discovered something rather curious, and am wondering if anyone has any more information about this.
I use the Children and Spouse fields in my Outlook records. When I sync to iPhone, these fields are not shown. However, if I choose to "share a contact", it sends a vCard, which does include these fields! So the iPhone is clearly copying it over, but not displaying it? What's the point of that? I can understand a reluctance to make some fields uneditable, but storing them without displaying them?
Also of note: the vCard does not include the Anniversary field, even though it does sync this and includes other fields in the vCard like Birthday. That looks like a bug to me. Anyone care to confirm?
Thanks,
Keith

Hi,
It depends what you require...suppose in the multiprovider you want the filed from the ODS then you should select the fiel from the ODS but if you want the filed to get the value from the navigational attribute then you should go fro the navigation attribute in the options.
Navigation attribute will show up in the left if you have made them navigation in the cube as well.
identification gives you an option to map the the multiprovoder fileds with the fields of the underlying infoproviders.....if you go for create recoomendations then it will chose the optimal mapping that is one to one mapping.....A to A etc...but in certain case you want A to map to B such as in sone cases shipt-to-party can take data from sold-to-party....depends upon the requirement.
The options in the left gives you the char which will show up in the query and by selecting the char from the right from different inforproviders you actually defeine which filed from the infoproviders it should take data from.
So just make sure that all the fields in the right which are going to show up in the query should get have the identiication from the different infoproviders and there respective char....a navigation mapped to a navigation....and a direct char to a direct char from the infoprovider.
Hope it explains.
Thanks

IPad will open but not display information entered on a form sent as a PDF.

iPad will open but not display information entered on a PDF file. Same file will open and display all information on my iMac. Anyone had this problem?

I think that you are trying to view a form fields PDF file and you cannot see the content that was filled in on those fields. Form fields will not show in the mail app or in iBooks. Download Adobe Reader for the iPad. It is free and it offers a lot of features for a free app. Save that PDF to Adobe Reader and see if the text in the fields appear.

Mapped characteristics in Multiprovider not available in Query Designer

Hi,
we have a multiprovider with approx 10 cubes and lot of characteristics, Navigational attributes mapped to it. I have added around 3 more characteristics and mapped to underlying cubes. But these added characteristics are not visible in Query designer. Is there maximum limit for the number of characteristics.
Thanks,

Disconnecting the BEx made it work. But i dont understand i added this yesterday in the multiprovider. But i also removed some navigational attributes from the mapping. I will re-map and check. Thanks for the tip.

Hierarchy node not available in Query Designer

Hello Gurus,
I can find the hierarchy node variable in BW but it is not available in query designer. Does anyone know what might be the problem and a solution?
Thanks,
Mark

Hi Mark,
You said you "find the hierarchy node variable in BW but it is not available in query designer".
How did you find the hierarchy node variable in BW? From backend SAPGUI, you will only be able to see the variable in some internal tables like RSZGLOBV. Did you mean this?
For "it is not available in query designer", do you means that when you want to create a hierarchy node variable for this characteristic in Query Designer, you don't find this certain hierarchy node variable in the hierarchy node variable list?
Important thing to notice is that, flat value variables and hierarchy node variables are listed separately. Did you make sure that you have chose to list hierarchy node variables in Query Designer?
Regards,
Patricia

Webfont not displaying properly in design mode or appearing in font list

Just updated Muse and now my heading webfont (Nunito) is not displaying properly in design mode or appearing in the font list. It is, however, displaying properly in preview mode. When I try and delete the font and then add it again I get an error message that says the font can't be added. Any idea what's going on?

Hello,
Please try the steps below. Hopefully this will fix the problem.
1. Close Muse
2. Rename the folders named tk1 and tk2 in the following locations
On Windows: %appdata%\com.adobe.AdobeMuseCC.2014.2\Local Store. You can type this in the Path bar at the top of the Windows Explorer window
On Mac: ~/Library/Preferences/com.adobe.AdobeMuseCC.2014.2/Local Store. You can type this in the Go To Folder dialog (Shift+Command+G)
3. Launch Muse and add the font again
Please let me know if that helps.
Regards
Vivek

Text value is not getting displayed in Query designer !!

Dear experts..,
i have created a new query in query designer using my info provider and then selected one field in default value and then trying to restrict that particular field while selecting the restriction in query designer am getting the exact text value but after generating the report instead of text value , key value is getting displayed....so how can i get text instead of key value??
please help me friends....
i have posted in OSS mesage also...i got a reply like...even i didnt understand his reply too...what he is trying to say?
whether can i get text display or not???
can any one help me in this regard???
SAP Reply----
Hello kumar,
After another analysis I have to inform you about general concept of
"compounded characteristics".
A compounded characteristic bounds two characteristics. The technical
name is generated by both technical names of the two characteristics
combined by two underlines "__".
An individual text is only available for one single combination of both
characteristics.
Example:
=======
Compounded characteristic "Famous family name" is a combination of
characteristic "COUNTRY" & "ETHNIC". Technical name: COUNTRY__ETHNIC
Values for Country: USA, Australia
Values for Ethnic: Asian, Latino
Possible value combinations with individual text:
USA & Asian; text: "Ling"
USA & Latino; text: "Sanchez"
Australia & Asian; text: "Chu"
Australia & Latino; text: "Garcia"
(Keep in mind the individual text only valid for the specific
combination.)
In analogy to the issue that you reported, you want to restrict this
compounded characteristic. In the window where you select the restrictedvalue (called Selector) you'll see on the left hand side all available
combinations of the characters with an individual text.
You select family name "Chu" and drag'n'drop it to the right side.
Actually you can only restrict the right compounded characteristic. In
our example you would restrict on characteristic "ETHNIC" with value
"Asian". (When you switch on technical names this comes more clear). Thetext "Chu" is displayed in the context of Selector because you selected
value combination Australia & Asian. But in the end it's just a
placeholder(!) for any combination of characteristic "ETHNIC" and value
#Asian#; in our example it could be USA & Asian "Ling" or Australia &
Asian "Chu").
By leaving the Selector the individual text is gone because now the
context is lost between the two characteristics. You have just a
restriction on characteristic "ETHNIC" with value "Asian". An individualtext can't be displayed because the compounded characteristic is not
specified for this restriction.
You're right, it is confusing when "loosing" the text of a restriction.
But accoring to the concepts of the compounded characteristics it
is a correct behavior.

Hi anandkumar,
I belive this issue can be resolved by changing the Query proprties for the perticular field.
Kindly check the Field proerties in query designer and ensure that Text is enabled ather than Key.
__Field property check up:__Go to query designer->click onn the field-> Right hand side in properties click on display tab-> select Text in drop down menu of Display as tab.
FURTHER CHECK UP: check the master data avaiulability for the perticular info object, if masterdata is not available, do the text data for txt data availability in report level.
Hope this helps you!!
Best Regards,
Maruthi

How to display in query Designer in a query the characteristics values of an infoObject in one cell

Hello Community Members,
I have query with 3 characteristics and 2 key figures, and
want to expand the key figures values only with 2 characteristics, and display the different values of the 3. characteristic in the first cell at the corner of the query cell:
          C31,C32             C21                       C22                      C23
          C33, C34
           C11                  KF11    KF21           KF12    KF22      KF13    KF23
          C12                   KF14    KF24           KF15    KF25      KF16    KF26
          C13                   KF17    KF27           KF18    KF28      KF18    KF28
          C14
How to set the characteristic C3 in query designer, so that their values will all be displayed in the cell in the corner.
many thanks for helping
Arnaud

Hi Arnaud,
Your query structure is not dependent on your aggregation level (I guess you are referring to the Exception aggregation or just the results and not AL in IP).
Number of columns will depend on the combination of C2 and C3 in this case. So columns will not be 6 but 24.
So I suggest you to create a work book based on two queries. One will just give you the values of C3. Use Macro to take its values and concatenate it and display in a new table along with the data of other query.
This solution is not flexible as workbooks usually have some restrictions on Bex Features. But your requirement is also not simple.
Regards,
Sujit.

Time dependent Hirerachy data not display at query level

Hi all,
I have loaded a time dependent hirerachy from flatfile,it showing same data as in flat file at RSMO,where as if I am executing query ,report displaying in hirerachy structure format,but DATE-TO and DATE-FROM are not displaying .
Ex:On ZEMPLYOE i have created ZMANAGER as hirerachy,report giving ZMANAGER&ZEMPLOYEE details correctly in hirerachical format,but Date-to and Date-from are not displaying at report level,where as entair data is loaded to ZEMPLOYE without any error.
If any one has come across the same situation,what are additional steps need to have take.
your help will be appreciated
Regards,
Praveena.

Yes, date-from and date-to are not meant to be displayed in the report.
Let me take an example to tell the purpose.
Suppose your hierarchy displays employees managerwise.
If you create hierarchy telling
from 01-01-2009 to 31-03-2009, employee E1 will report to Manager M1
from 01-04-2009 to 31-05-2009 , E1 will report to M2.
then, until March, E1 will be displayed under M1 node in the report, and in April and May, he will be displayed under M2 node.
So, we create hierarchy only once, but they change in the report depending on the month.
Hope this helps.

Palm Desktop 6.2.2 on Win8.1 syncing but not displaying data

I'm so pleased to have found this forum. I didn't realise there was so much love for old Palm devices. I started with a Palm V and worked my way up to a Tungsten T & palm Desktop 4.1.4 on WInXP and everything has been so good that I've resisted moving away from Palm Desktop as it does everything I need. But I've just bought a new Win8.1 PC and am having some problems that I hope someone here can help with.
I've been through the help here about installing Palm Desktop 6.2.2 and the win8 driver and the installation was very smooth and I could hotsync via usb with no apparent problem, except that Palm Desktop is not displaying any of my palm data!
When I first ran hotsync (from the palm cradle button) it asked for a user name. My Tungsten T was already being used on my XP PC and was full of data. So I entered the Tungsten user name and hotsync continued. it took a couple of minutes or so (as would be expected) and when complete it said everything was ok. I checked the Hotsync logand it confirmed everything was synchronised correctly - but when I opened Palm Desktop there was no data being displayed.
I then checked the data files in ...documents\Palm OS Desktop\.... and the address and datebook files are present and full of my data. I even opened them using Notepad and could easily see loads of ascii text amongst all the 'junk' characters, so it looks as if the sync process has worked correctly but nothing from my Tungsten is being displayed in the Palm Desktop.
I then added an event in the datebook in Palm Desktop and another event on the same day in the Tungsten. I then did another hotsync. It was reported as successful but the Tungsten event did not appear in the Desktop although the Desktop even DID appear on the Tungsten. So the sync process seems to be only working one way!
I've never had this happen before and would really appreciate any help.
This question was solved.
View Solution.

OK, try using the "Palm Hotsync Setup" program found on this page.
Since you are using an older T|T, this may be the answer.
There is a guide available from this website for migrating PalmOS data to Android, if interested. I made that jump years ago when webOS was ended. You can find it on their Home page.
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

Infoobject in infoset but not displaying in query designer

Similar Messages

Maybe you are looking for