InfoObject Name

Hi,
I created Master Data for " PlantID" attribute as a "Plant Description"
InfoObject Name for PlatID (XCPLANTID)
InfoObject Name for Plant Description(XCPLANTDS)
After creating I loaded Master data here is the example
Plant1 PlantDescription1
Plant2 PlantDescription2
I would like to use PlantID(XCPLANTID) in my Infocube to load the transaction data but XCPLANTID infoobject already having Master Data If i load transaction data what will happend? is it right way to do this?
OR
Can I create new Infoobject as XCPLANTI0 to load PlantID Transactional data? If I do this way How the Master data IO(XCPLANTID) link with Transactional data IO(XCPLANTI0)?
My question is can we use Master Data InfoObjects to load daily transactional data in Infocube?
I am not sure about this concept if some body provide information that would be great
Thanks in advance

hi roy ,
I got ur point of confusion.
I will give u an example which is very easy.
Now understand carefully. See in transaction data for example a transaction of a bank account.If you have account no. (for you plant id.) which is a master data , than only you can do a transaction , right.
So if you maintain account no. as a master data than only you can go for maintaining transaction records for that account no. So when you maintain a transaction records for an account no. account no. is not added again n again in the bank records.The person matches the account no. in the master data and than update relative to that account no. the transaction recordsin another book.
Similarly when you initially upload the master data Plant ids. are saved in the system .when you upload data for a cube having the plant ids. the plant ids. are not added in the master data instead consider this cube as another register where with respect to plant ids. available in the master dat we will put the entries for transaction data.
Basically that characterisic present in the cube ,says i am here for relationship between master data and transaction data.
As without having Plant ids. and there description stored somewhere , there is no fun saving transaction data related to it.
I hope now ur confusion is no more confusion.

Similar Messages

Hierarchy leaves have different InfoObject name than the value

Hi,
I am working on an hierarchy and loaded data to BW. I noticed that when I expanded the tree, the right side of the leaves saids 0COSTCENTER but the left hand side of the leaves has the department values. Would this be a prolem for reporting or any purposes for use of hierarchies? I was told that the 0COSTCENTER should display the InfoObject name ZDEPT instead.
Thanks
Will

Hi Voodi,
Actually I was wondering if you could give me some insights on this. We are working with a 2 level hierarchy. That is
Costcenter1
   -Dept 1
   -Dept 2
   -Dept 3
Cost center2
   -Dept 4
   -Dept 5
   -Dept 6
Etc...
We would want a manager from cost center 1 to only look at data from those departments from cost center 1 and not any other cost centers. We are building this hierarchy to check the authorizations.
Would recommend doing this even though I think we could do this with attributes and navigationsal attributes instead of hierarchy because it is only 2 levels.
Is there a way to do authorizations using navigational attributes?
Any other ideas?
Thanks,
Will
Message was edited by:
        Will Ferrell

How to get the infoobject name in runtime?

Hi,
I have a variable which is used by several queries. I can get the query name at run time through using the SAP memory (IMPORT compid = lv_compid FROM MEMORY ID 'COMPID'.).
Now I want to get the Infoobject name in run time, is that possible through the same way?When yes, what is the memory ID?
When no, how can I get it in RUN Time?
best regards

Hi,
no, I m not using customer exit. I m using master data read class.
When the user klick the search help of the variable by the beginning of the query, the masterdata class will be called. I want to get the infoobject name of the variable in this class in run time
thanks
best regards

How to find the Infoobject name by Datasource .

Hi SAP Gurus
Can any of you guys suggest how to find the list of Info objects for the Datasources .
I have a scenario where I have a list of Datasources (400) which are Text and Attr Datasources,
for which I need find the list Info objects,
so can you please tell me is there any way that I can find the List of Info objects.
Thanks

Hi Rahul,
You can make use of RSOSFIELMAP for your requirement.
Go to Se16----->rsosfieldmap.
You can see several fields as selections among them you could find Info object and Field selections as well.
If you give infoobject name in selection, it will display all the data sources where it is available.
If you give Filed also it will display the same.
If you want to maintian document do Top Down Analysis from Bw stand right from Data target-->update rule--->infosource
Hope this helps
SujanR

Rule 5 :target InfoObject Name Source parameter 007 not being used

Hi Gurus,
I am trying to load data Into BI using flat file .During creating transformations for infocubes am getting this error.Rule 5 :target < InfoObject Name > Source parameter 007 not being used .
Thanks

Thanks Beekay iyour suggestion helped me .
My problem is solved ,in rule details i removed those fields and again insert those fileds .
Thanks

Char infoobject name length

Hi,
I'm working with SAP_BW 3.50 version and I try to create characteristic infoobject with name length = 11(some already created infoobjects have that name length), but the system allows me to type only 9 symbols to 'Char.' input field.
Thanks in advance,
Fiodar.

Hi Fiodar,
I remember, I had this experience in the past.
If you create infoobject from infosource mainteance screen it allows you a length.
But if you create from RSD1..It allows different length.
Try these :
Try creating infobject from
-RSA1 --Infoobject catalog
-RSA1 -Infosource maintenance..a button on toolbar
-RSD1- Infoobject maintenance.
Did you observe any difference.
Anil

Gray InfoObjects in Infoset

I am trying to enable reporting on InfoObjects on my InfoSet in BI 7.0, but whenever I open the InfoSet I cannot check the box next to the InfoObject name because it is grayed out.
Can anybody explain how to remedy this?
I will award points.

Infoset can be operated only with Master Data Infoobjects. Are the Infoobjects you use are the master data ones?? plz check..

R3 to BW InfoObject Mapping - in report form

I have had several requests by my users for a Bex report that gives them the R3 to BW InfoObject mapping of the InfoObjects they see in the Cubes and ODS's they report from. I am familiar with the R3 table RODCHA and the BW tables RSOSFIELDMAP, RSDIOBJ, RSOSFIELDMAP and RSTSFIELD and know that this data is contained in these various tables. Has anyone come up with a way to pull from these tables and give their users the R3 to BW InfoObject mapping via a simple BEX report/jump query?
Dave

Thank you Sudheer, your answer was very helpful. The problem is a little more complex than I stated. These tables (RSTSFIELD specifically) relate the R3 field name with BW InfoObject name to the Transfer Structure name which is usually nothing like the Cube or ODS name. The user would have to know the Transfer Structure name related to their Cube/ODS to get the information they need in the Bex report. I was hoping that someone might have a little more information on what other metadata table(s) I would need to join with these tables to get to the Cube/ODS name that is ultimately needed by the user. This additional information would be very helpful.

How to delete the Hierarchy data from Infoobjects.

How to delete the Hierarchy data from Infoobjects. In my case I had 300 records in the corresponding table of info object.
When i was trying to delete the hierarchy data, I am getting error message. "Some master data not deleted". Can any one tell me to delete all these records by using a program.

Hi
Go to SE11 and enter the hierarchy table name.
/BIC/H....(infoobject name)...and execute the table and select table entry and delete all....
Thanks
TG

Error while assigning infoobject to the read master data in rule type

Hi sdns,
I want to read the zwostd info object data from zemployee master infoobject attribute list. For that i have selected rule details of zwostd infoobject in transformation of info cube, then i am tring to select the read master data rule type. It is taking more time and then it displayed error like permitted time was exceeded. Could any one please give me the solution for this problem.
thanks
karun

Sometimes directly typing the infoobject name in the field helps - otherwise it tries to fetch all the infoobjects available which is possibly why the time out occurs..?
Enter the Master Data infoobject directly and then you will get the fields assigned.
However my experience with read master data has been that whenever you change the master data IOBJ by way of adding / removing Nav Attributes / attributes etc - all the transformations using the read master data for the IOBJ that is being changed will get deactivated and it is a pain reactivating and transporting them again - particularly so when you are developing something on them and the changes are stuck across multiple requests ...
IMHO use a routine instead to do the same - it involves lesser maintenance. SAP is anyway going to run a similar SQL...

InfoSpoke and Logical File Name

We have created an Infospoke to extract data to a logical file. When we define the Logical File Name Definition using the FILE transaction, we have to enter a physical file name. This will require us to create a new Logical File Name Definition for every Infospoke. Instead of hard coding the physical file name in the Logical File Name Definition for each InfoSpoke we would like to dynamically create the file name to include the InfoObject Name (cube, ODS object, etc) in the physical file name.
We have tried to use the <F=CPROG> substitution parameter in the logical file name. When the function module FILENAME_EXIT_CPROG is called we find that we do not have access to any information other then what is available in the system variables (structure SYST)
1. Are there any modification to the class CL_RSB_FILE_LOGICAL and method DETERMINE_FILENAME that we can make to create a logical file name that includes the InfoSpoke name?
2. Is there any way to access any system information from within the FILENAME_EXIT_CPROG function module that would give us the InfoSpoke information?

I think you can modify the method 'DETERMINE_FILENAME' for this.
In the call to FILE_GET_NAME_USING_PATH FM, add an additional parameter 'parameter_1', and set its value to O_R_REQUEST-N_OHDEST (this should have the open hub destination name).
call function.....
parameter_1 = O_R_REQUEST-N_OHDEST
If the logical filename contains placeholder (< > ??), it should now be replaced with the destination name.
I am not very familiar with ABAP objects. You might wish to check whethet it is possible without a 'modification' like this, where you create another Z implementation of the class and delegate(?).

Determine Data Size of InfoObject

Hi, InfoObject maintenance allows you to specify the data class size of the infoObject.
Example: 3 = < 25meg
4 = > 160 Meg
Does anyone know how to determine this size? Is it determined by one specific table or a combination of the the various master data tables?
Any opinions or experiences are greatly appreciated!

The procedure is as follows (assuming the backend is Oracle):
Check the data class in the infoobject (Extras --> Maintain Db storage parameters --> note the data class).
Check the tablespace assigned to the data class (SE16 TAORA --> note the tablespace)
Go to DB02 transaction --> Click on the current sizes --> double click on the tablespace --> in object name give the <infoobject name without 0 in case of std delivered> eg: for 0PROFIT_CTR give PROFIT_CTR
This should give you a list of all the tables and indices with the current sizes. you can also check the growth over a period of time.
The above procedure should work in most of the cases except the cases where the infoobject refers to different table for text (say for example 0FISCPER refers to T009C for text)
If the Data class is not populated the you need to find the tablespace by hit and trial method (though usually the tablespace would be PSAPDW2 I think!!)
Hope this helps
Thanks,
Gopal

Qestion: Table about Infoobjects

Hi
The situation is: I get an Infoobject name in the run time, and I need to know if the Infoobject has a master table and what the table name is.
Is there a table which contain such kind of infomation?
Thanks
Best regards

dynamically build table name like below
if vendor is table name..
then table would be /BI0/PVENDOR ---> table
and do select * (table).
check sy-subrc

Infoobject deletion problem.......

Hi ,
I am not able to delete one info object.
It is being used in one table /BI0/0100000403. The table description is query template. But I dont know how to remove it from the query template.
Any suggestions ?
Thanks , Jeetu

In RSD1 enter the InfoObject name and search where used button at the bottom, once you know where it is being used, go to that template (report), cube, DSO and remove that object and delete it.
You can't delete the object before you remove it from those objects.
thanks.
Wond

Error when trying to make an infoobject "Authorization Relevant"

We are getting the following message in German when we try to make an infoobject - 0PERS_AREA "Authorization Relevant" (using RSD1), Can anybody help us in translation of this nmessage and possile remedy. In fact, I tried other infoobjects as well lke 0ORGUNIT, 0EMPLOYEE, etc with the same message.
"InfoObject 0PERS_AREA: Keine Berechtigung, um die
Berechtigungsrelevanz zu ändern"
Thanks
Raj

hi raj,
You should do first this :
1. Goto RSA1->Click on Infoobjects->Select ur Infoobject(0PERS_AREA )-> rightclick->select Change It will give Change Characteristic screen in this screen-> click on Business Explorer Tabstrip observe in general settings vey below ur having one <b>check box for " AuthorizationRelavent"-> check that check box --->save +Activte.</b>
next u have to follow these steps :
1.before going to authorizations u have to decide on which Infoobject u have to apply authorizations.
EX: SD--- Sales Org, MM -> palnt ,purorg,FI> companycode.
first u ahve to decide which area & on which Infoobject.
2.goto that Infoobject --> change there check the checkbox Authorization relavent object cahechbox
2.after that U Have to goto RSSM there u have to create authorization object
Ex: Zxxx ( XXX is Infoobject Name ).
3. In the same transaction Screen u have Infocube selection radio Button check that then select on which cube(cube means under that cube all Quaries) u have to make authorization for that perticuler Infoobject.
4.next goto PFCG create role & save it
5.goto Authorization tab in that selct edit authorization it will give automatiaclly authorization Templates in that u have to select only S_RS_RREPU & press Enter.
6. Select manual pushbutton it will ask authorisation object enter ur authorization object what u have created ( zxxx) .
7.click generate +enter
8. goto user tab Enter userId+enter + click on usercomparision+ enter
9.save the role.
FOR HIRARCHIES:
1. goto RSSM There u have one rediobutton called authorization hierarchy ( this radio button is very below the RSSM screen)
2. there u have to select Hierachy on which u have to apply authorization.
Thanks,
kiran

InfoObject Name

Similar Messages

Maybe you are looking for