Infoobject not available in the query
hai gurus
We have appended a cube with info object that had a query already on it but that infoobject is not available in query
hw to refresh the query designer to get new appended info object
TQ
KEERTHi
Hi,
Welcome to SDN!
Make sure that your cube is active.
Close your BEx and open again.
Hope it helps.
Best regards,
Eugene
Similar Messages
-
Datas are not available to the query when upload a Infopackage
Hello People,
I Would like to know what can be the reason ..why the datas are not available when we execute an upload from FlatFile to the Cube (this one is the last target one).
Considering tere aren´t any poroblem in may target (Cube)
The system shows us the upload was ok, but the status about the "available datas to the query" was not activated.
Thanks,
Rosana.Hi ,
Please go to T code SE16--> Table RSDDAGGR
Here AggrUID(STARTUID) give not equal to blank, you will get list of all the cubes which has aggregates.
If your cybe is in this list , you need to rollup the data to mae this available in reporting.You can rollupp the data by going into Manage of the cube.
-Vikram -
Leaving date is not available in the Query report
Hi,
I had a problem that the leaving date is not generated while running a report from the sap standard report.
Note:
I has assigned the leaving action config as
Coustomer Specific : 3
Employment: 0
Specific Payment: 0
Should we look into ADMIN LDATE switch
Anything to do with Feater "LEAVE"
Or anyother issue pls.
Thanks for the community.
Regards
sekharHi,
Run the report RPLMIT00 and in the selection criteria select employment statusis not equal to 3.
Execute the report .
You can find the leaving date.
Warm Regards,
Kapil Kaushal -
InfoSet maintance - added new InfoObject, not available in query
Hi,
We appended a new field to the 0VENDOR_ATTR extractor and the data comes accoss fine. We are using InfoObject 0CREDITOR in an InfoSet. When I did an 'adjust' step to the InfoSet, the new InfoObject became visable but the check box is grayed out and the new InfoObject is not usable in a query. Is there any way to change the check box so that the new InfoObject is available in a query?
Thanks,
JohnHi John,
Change your 0CREDITOR InfoObject and make sure that the 'Attribute Only' box is not checked. You will be unable to make it usable in an InfoSet query if this box is checked. Let me know if this solves your issue.
Josh -
The currency translation type 0MEANDAILY is not available in the system
While executing certain queries for CRM Sales I am getting this error "The currency translation type 0MEANDAILY is not available in the system" I have looked and haven't found this info object in the Business content.
Any help?
Thanks
ArunavaDinesh,
If I do a transfer Global setting from RSA1 on my CRM system there are four to choose from
1> Currency
2> unit of measurement
3> Fiscal year variant
4> Factory calander
Which should be chosen..?? for the 0MEANDAILY . From Anurag's post it's evident that this is a part of the BC and being an info object it's not populated by transferring Global data. Please explain
Anurag,
Can you please be a little more specific .. I am in the rsa1--> bc Then what.. How do I search? I searched against the infoobjects and this is not available
Thanks
Aruava -
Infoobject not available in "D" version
Hi Friendz..
I am trying to activate the Business contents using report "RSO_BC_INSTALL_ALL". While analysing the log in SLG1, I find that the system shows that some of the infoobjects are not available in "D" version.
Example of error log:
Object '/APC/CHANCD' (IOBJ) of type 'InfoObject' is not available in version 'D'
Message no. RSO252
Diagnosis
You wanted to generate an object with the name '/APC/CHANCD' (in transport request IOBJ) of type 'InfoObject' (TLOGO). This is, however, not available in the BW Repository database. It does not exist in the requested version D. If the version is 'D' then it is possible that an error arose during the delivery or installation. If the version is 'A' then the Object was either not created or not activated.
System Response
The object was not taken into account in the next stage of processing.
Please suggest the reason for it.
Thanks & Regards,
Surjit Phi
have you checked the infoonject in object types in BI content tab.click object types and in that choose infoobject and search the infoobject. if its there then drag and drop and install it.
Regards
Dina -
Currency translation type 0CMCALDAY is not available in the system
Hi,
When I run the query, I am getting following error message
"Abort the currency translation type 0CMCALDAY is not available in the system"
I couldn't find 0cmcalday object in BC too. How can I install in this obj in BW??
Thanks,
SKProblem solved
It is located under Currency Conversion types, in the BC -
my app store wont let me download apps, says there not available in the uk?? please help??
Try This...
Close All Open Apps... Sign Out of your Account... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430 -
Hi All,
While opening a saved for later notification, we are getting "The selected action is not available. The cause may be related to security. Contact your system administrator to verify your permission level for this action". error.
This is a custom notification.
Please help.
Thanks
RaghavaHI All,
Please help on this issue.
Thanks
Raghava -
My rue la la app for ipad stopped working. I deleted the app and tried to reinstall it, it is no longer available in the app store and when I research it on safari and find it when i try to install it says that it is not available in the us store. What is that all about?
My app did the exact same thing. It is still unavailable on the App Store and when Rue La La's site directs you to download their app, the "not available in the U.S. message appears. This happened to me last night. The app wasn't working, I deleted it and was just going to reinstall but was unable to find the app. I figured it was some glitch but I have tried multiple times this afternoon to no avail.
-
I am extremely upset. I purchased my iPad in SA and now I am in Greece. I cannot download free apps as I get a message that the apps are not available in the SA store and only in US stores. When I change to the US store the same thing happens. What is the point of having an iPad if I cannot use it worldwide??? I feel that I wasted my money purchasing it as I specifically purchased it to use when I travel. How can I get access to all the available apps and why are they restricted.
You can use your iPad worldwide. However, each AppleID is tied to
a specific country's store. To use the AppStore in any country, you
must be in that country and have a credit/debit card issued by a financial
institution in that country with a verified billing address in that country.
It is the developer's choice which AppStores he makes his app available
from, and some countries prohibit certain apps.
To make a purchase from the US store (including downloading a free app
available in the US store), you must be in the US and have card issued
in the US with verified billing address in the US.
You can use your purchases from the SA store worldwide, but you
cannot make purchases in other than the SA store unless you meet
the aforesaid conditions. -
Hi, I bought an Ipod touch in Dubai. When I upated to iOs 6, everytime I would download an app it will says that it's not available in the emirates store and I should change to the US store. But before i updated to iOs 6 i have been successfuly downloading apps. Please help because now I cannot really use it.
How to Change Your App Store Account Location | eHow.com
Your account, including payment method also has to be associated with the USA when you are in the USA. -
I have iphoto 9.2.1 (don't ask...it's not my computer...) and I can't seem to find a way to update to the latest so I can migrate pix to Photos. It says I need to do it; it takes me to the app store and then says it's not available in the UK.
Any ideas?If her version did not come preinstalled with Lion or later, but with an installer disk, it has probably never been associated with the AppleID and will not show as purchased.
In that case your friend needs to contact the AppStore support to help with the download.
But perhaps the purchase has been hidden. To unhide it, go to Store > View My Account, and go to Manage for Hidden Purchases. -
On i-pad, when I try to enable itunes match, it says, "you are not currently subscribed to iTunes Match. Use iTunes on your computer to subscribe." I am subscribed though! Then it says no to my request and, "item not available in the U.S. store." My Mac will not use update iTunes to any later version than the one I have because my os is also out of date, but when I try to update that i cant, so what do I have to do? Please don't tell me I have to buy a new Mac to be up to date.
On the iOS device you must be logged into the store with the exact same Apple ID you used to originally purchase the service. Go to Setting > iTunes & App Stores and if necessary sign out/in and then enable iTM.
-
Hi
I have a Macbook air & iPhone 4.
what do I need to do if I want to buy a book (ebook) or an application that is not available in the iTunes store in my area i.e. Africa (Egypt)?
Do I need to open a different account in the iTunes store in the other area i.e. USA ?
Please advice
Thank youYou can only buy content from your own country's store i.e. the Egyptian store if you are in Egypt - you need to be in a country to use its store, so to use the US store you will need to be in the US and have a US billing address on your account. If there is an app or any other item that you would like to be buy that isn't currently available in the Egyptian store then you can try requesting that it be added, but unless the app's developer or rights-holder agrees to it then Apple won't be able to sell it there : http://www.apple.com/feedback/itunes.html
Maybe you are looking for
-
Hi ~ I recently upgraded to the ios 7.04 and ever since I am unable to download apps to my ipod (5th gen). The new apps show up in my itunes library but they will not download onto my ipod. I feel as though I have tried everything. Please help with
-
I used internet "exploder" several days in a row and now cannot load firefox. I have tried end processes and there is no firefox open, there are no errors, nothing supposedly wrong. I can't get it to laod. What do I do. I hate exploder.
-
Hi friends, I dont find the archive objects for the tables EEIN and EAUS. In what way I can identify the objects for this two tables to finish archiving. Help Please. Thanks Shree.
-
LC Showing up as the default in Journal Template
Hello, We no longer have LC in our RptCurrency Dimension, however, it still shows up from time to time. The most recent apperance is on the Journal Template. It shows up as the default RptCurrency which is odd because it is no where in the dimensio
-
Standard CDC-ECM can not work in Lion
I have built a standard CDC-ECM image(PID is 0x900D) for a device, it can work in Mac OS X 10.5/10.6; but failed in Lion. It seems already find the driver but can not connect successfully in Lion. What should I pay attention? Besides, where can I