Infoobject not visible

Hi,
I have created an infoobject. The search doesn't show the infoobject in RSA1. But, in RSD1, I am able to see the infoobject. I could add it in the transport. Will there be any issue when it is transported?
Thanks.

there can be several pssibility why you are not able to find infoobject:
1. it is present in infoobject catalog but not present in infoprovider.
2. it might be placed in a unassigned node.
use the Find option available in the left pane of RSA1 instead of using the option available above and if you find it there then just right click your catalog -> change ->charateristics ->infoobject direct input -> and then give name of your infoobject.
hope it works.

Similar Messages

  • Activated infoObjects does is not visible in AWB

    Hello,
    I working with a brand new BW system. First this to do was to activate a lot of business contents.
    The activation process went OK, but none of the activated InfoObjects are visible in Administrator Workbench under MODELING -> INFOOBJECTS.
    Only Inforobject catalogs are visible.
    If I open a cube I can see the infoObjects and they have the status: Activated.
    My 'Select display option' in AWB is set to 'Display all'.
    Has anybody an idea why?
    Kind regards, Torben

    Hi,
    Thank you for your answer.
    It is not just one infoobject I'm missing. It's all of them.
    I activated cube 0SD_C02, 0SD_C03 and 0SD_C05 and all of the related objects.
    In RSD1 I can find all the infoobjects used in the 3 cubes, but in AWB/modelling/infoobjects none of them are visible. They are not under "unassigned notes" and they are not under the infoarea catalog and they can not be found by using search.
    But in RSD1 they can be found and they have status activated
    Many thanks, Torben

  • After activation of atandard business content key figure is not visible

    Hi all,
    I am trying to implement inventory management scnerio in BW3.5 using screen shot PDF , for this i activate standard business content ( cube : 0IC_c03 ) and activate all its related object . one of my key figure 0RECVS_VAL  I want to change its parameter for this when I search this infoobject in Infoobject tree this is not visible
    while its present in cube 0IC_c03 ,can anybody tell me for changing in this key figure what can i do???
    Thanks and regards
    Ankit modi

    Hi
    Again it install from BI content and do the changes what ever u want by RSD1
    Cheers
    Edited by: SDN USER on Jun 26, 2008 12:04 PM

  • Hierarchy in properties of characteristics item is not visible in report

    Hi,
    It has been observed that the Hierarchy name in u201Cproperties of characteristics" of an infoobject for example 0GL_ACCOUNT is not visible in BEx output report. The report shows complete hierarchy with all nodes / subnodes but NOT HEADER description!
    Also whenever you change the hierarchy (by changing global / local view), Same problem exist.
    This is one of the high priority problem users are facing since they canu2019t see hierarchy name (Key / Text) causing confusion.
    Please advice.
    Thanks and best regards
    Rajendra

    Make a duplicate header above all the levels and show text in the BEx output
    Level 1 -> Hierarchy name -> Level 2 ( Initially Level 1) -> Level 3 ( Initially Level 2)

  • Currency Conversion type not visible in the query

    Hi ,
    I created one currency type conversion   Z_INR
    exchange rate type : M
    Exchange rate from infoobject : zexch_rate(key fig)
    source curr from data record
    Fixed target curr : INR
    Variable time reference  : A to Exact Day
    Special info object : Ztr_date (Transaction date)
    it got saved succesfully but wen i try to include  this in the query its not visible there . can anyone let me know why this problem is coming
    help will be appreciated .
    i also included rate and date in the query still not visible

    Hi,
    Create Currency conversion type using Trans: RRC1.
    1.Specify your Exchange rate type.                     
    2.Dynamic Exchange rate type
    3.Source curency from data rec.
    4.Fixed currency say USD.
    5.Select Variable Time reference "Start Month" and Special Info Object - 0calmonth
    Secondly In the key figure field to be converted in the query,   select properties - select the currency conversion key name .
    Thanks,
    Nagesh
    Sony Singapore

  • Navigational attribute data not visible in BEx Report

    Hello All,
    I am facing following problem in one of my BEx reports:
    I am fetching data from an ODS. With other columns of ODS,  I have also to show few navigational attributes( which are master data of some info-object) . In report the corresponding data in navigational attributes is not visible for few records, although when I see the master data of this Info-object (whose navigational attributes I have to include), in  Adm. Wrkbench the data is visible. I wonder what step is missing.
    Many Thanks for helping me out.
    Best Regards,
    Sumita

    Hi Roberto,
    While trying to activate the Infoobject's master data (by right-click) I get the following message,
    "Lock NOT set for: Loading master data attributes"
    And the data is not activated.
    Can you please suggest what needs to be done.
    Thanks & Regards,
    Sumita

  • Attribute not visible in Query Designer

    hi BI Gurus,
    I could not see some InfoObjects(Attributes) which are marked Authorization Relevant, in the query designer. And the strange thing is, they are not visible even for the user with SAP_ALL and 0BI_ALL assigned. The authorizations for the  cube in which the main char is used looks fine.
    I have checked all the options in RSECADMIN, everything looks good.
    pls help me in finding the solution..
    thanks
    Cnu..

    check out with the info object screen in attribute tab, navigational attribute on/0f switch box, if u r using FF source system.
    check out with the infocube whether u r checked the check boxes in navigational attribute tab.
    regards
    harikrishna.N

  • Characteristic not visible in tree?

    Hi,
    why is it that some times infoobjects are not visible in the tree under the InfoObjects tree in the modeling tab-strib?
    None of the characteristics on this system are available, but I can find the infoobjects from transaction RSD1?
    I have installed cubes with all before in dataflow and thereby also the infoobjects and the infoareas from business content, but they don't show up in the tree when I switch to modeling.
    I can create an InfoObjectCatalog and add the infoobjects, but I would have expected the infoobjects to be available without this manual step.
    Have I overlooked something obvious?
    Regards,
    Christian

    hey Sree,
    If an InfoObject can be seen in RSD1 other than the InfoObjects folder, then you answered
    "If you create a $TMP object under a Transportable InfoArea, you will face this problem. Now the only way to reach it is RSD1, assign proper Transport Package to see in under the correct tree."
    Could you elaborate it on how to do this step by step?  You mean to reassing the InfoArea to a transportable package, but how?  I've encountered the same problem.
    Thanks in advance!
    Message was edited by: Kevin Smith

  • IO is active in BC but not visible in RSA1

    I have installed one IO '0PO_NUMBER' from Business Content
    and have saved in local object.Following way I installed the
    infoobject,in the right hand pane its showing active but its not
    visible in RSA1.
    Steps
    1. Dragged the perticular IO-PO_NUMBER to the right pane and dropped there.
    2. Grouping - In data flow before
    3. Collect  - Automatically
    4. Install  - Install
    Now IO is avtive in BC -right pane where we used to drag and drop the IOs.But in RSA1 its not found.
    Could somebody tell me why its not found ?

    Hi BI Experts,
    The standard IO that I have installed successfully form
    Business Content is showing active but its not visible in
    BW system.
    Then again,I have deleted the IO form RSD1 and installed
    it and got the same result as it was before.
    Your suggestions are welcome.
    Apart form this,Please tell me how to find inactive IOs in
    BW system.
    Thanks

  • External hard drive not visible in disk utility or finder

    Hi all,
    I have had a good look through previous discussions and I can't seem to find an issue relevant to mine.
    My external hard drive has 2 partitions (1 time machine back up, 1 general hard drive). The issue is that the HD is running when it is plugged in however it is not visible in either disk utility or finder.
    I am running OS X 10.10 (Yosemite) on a 2010 MacBook Pro. I also have parallels desktop running windows 7. When I boot windows and plug in the HD I usually get the option to mount the HD to either OS X or Windows. With this issue the option window appears for a split second (not enough time to select either) and then disappears. It seems that the HD may be ejecting itself as soon as it is registered by the computer. I have tried using a different power cable for the HD and also a different usb cable, this doesn't help.
    The external HD is a Samsung D3 Station, which i have had for 6 months now and never had an issue with.
    Any help is appreciated
    Thanks,
    Bruce

    An update for anyone who can help me:
    I have tried the external hard drive in other computers (mac and windows), each time I get the same problem above.
    I have removed the HD from the enclosure and purchased a docking station for it (3.5" SATA). When I plug it in to the laptop it disconnects itself straight away before it is visible. With the windows computers it installs the drivers and says that the device is ready to use, then disconnects before it shows up.
    As the HD is not visible there is no option to re-format or anything.
    This is very frustrating as I was using the HD with no issues and it randomly disconnected and I have not been able to access since.
    Thanks in advance for any help.
    Bruce

  • Hi - I am looking for the Adobe Illustrator 2014 1.2 (or .0.2) bugfix update for Mac - and it is not visible in the Adobe Creative Cloud Packager (Mac version). The only update visible is Illustrator CC 2014.1  - which is what introduced the bugs.

    Hi - I am looking for the Adobe Illustrator 2014 1.2 (or .0.2) bugfix update for Mac - and it is not visible in the Adobe Creative Cloud Packager (Mac version). The only update visible is Illustrator CC 2014.1  - which is what introduced the bugs.
    The only thing that I can think of that might be causing the issues that I have a Mac Mini on Mavericks.
    Dave

    Hi
    I have discovered that my question above is a non-question. A user triggered by looking at the below article about Illustrator 2014 cc 17.0.2
    http://helpx.adobe.com/illustrator/release-note/illustrator-17-0-2-release-notes.html 
    He had recently upgraded from wht we now know is 18.0 to 18.1 which is the latest version. He read the above artic
    le and supposed that it was a bug fix release for his version - because the v17 ov18 number is not often displayed. It is usually just 2014 CC.
    I have asked him to post a bug report about Adobe Illustrator CC 2014.1
    Dave

  • IDOC not visible in IR but metadata successfully imported

    Hi,
    I have this wiered issue.
    I want to import IDOC WPUSKR01 (cashier productivity) from BI.
    But when I connect to BI system from IR to import Idoc structure, this IDOC is not visible.
    But I can manually import the metadata from BI in idx2.
    Now how to import this in IR?
    I have imported other Idocs (like WPUBON) before and did the scenario successfully for BI.
    Regards,
    Anirudh Vyas.

    Hi,
    In BI Tcode we82 I have manually added the entries for WPUKSR01. Now Idoc is visible when importing in IR.
    I have checked all the segments in we31, they are all released.
    But it gives error:
    Error: IDoc type WPUKSR01 contains errors (unable to read segments)
    Then, I checked in R/3, there also WPUKSR01 was not there in we82. I manually added there and I was successfully able to import it in IR.
    But the same thing is failing in BI. I have SAPALL permissions in all the systems.
    Can I use Idoc imported from R/3 in scenario for BI?
    regards,
    Anirudh.

  • How can I add a device to my library? My e-reader is registered but not visible.

    Hello,
    I use a Tolino Shine and can download E-Books via WLAN directly to it. I can also download the books to my netbook. However, when I plug the Tolino into my netbook it is not visible in the Adobe library and I cannot move books from the library to the Tolino.
    I tried to reset the Tolino to the manufacturer settings. This did not improve the situation.
    Any suggestions?
    Thanks a lot!

    http://www.apple.com/icloud/find-my-iphone.html
    any chance of it working on non-apple phones?
    No, it requires the operating system iOS, only available on Apple Devices.

  • Reporting Flag is not visible in the manage screen

    Hi BI Experts, Good morning.
    We load the inventory data daily in the night time which is delta load.
    5 days back, we got 0 records and the request is in red.Then i rerun the infopackage manually and got the total records in to the cube.
    From that day onwards its running successfully.
    Yesterday i deleted the bad request from infocube.
    But the Reporting flag is not visible.
    Today i didnot get the records.
    Please can anyone tell me the process.
    Thanks in advance.
    Regards
    Anjali

    Hi Nagesh,
    Still i am not getting reporting flag.
    I tried what did u say.
    And today i did not get the records. Infopackages didnot run. It shows in red.
    I tried to run it manually but it gives error.
    The error message is:
    Short text
        An exception occurred that was not caught.
    What happened?
        The exception 'CX_RSR_X_MESSAGE' was raised, but it was not caught anywhere
         along
        the call hierarchy.
        Since exceptions represent error situations and this error was not
        adequately responded to, the running ABAP program 'SAPLRRMS' has to be
        terminated.
    Please give me the reply.
    Thanks in advance
    Regards
    Anjali

  • Drop down boxes do not show up. My tabs are not visible. I could barely see the box to type in this question. Something is off. I deleted and reinstalled program it is still just floating words. I work on a Mac with ox 10.6.8

    The browser boxes, tabs, and links do not show up with the needed outlines, colors, and shapes. This box I am typing in was barely visible. Above this box is a set of two verticle parallel bars. When I moused over it, I saw it was for inserting a link, but if I had not been curious I would not have known what those lines were for. When I look at this page on PC I have a colored blue backdrop. It is not visible on the Mac. The search box does not have the image of the magnifying class and the arrow does not show up where it should be. The words Post Question just appear below the statement we have made some educated guesses about your browser. I thought maybe it had been a theme that was applied, but I do not see how it could have come on when I trashed the old version of the firefox.

    A;though the CSS is very well documented, there are those that ignore those signs. Look at the following
    /* Menu item containers, position children relative to this container and are a fixed width */
    ul.MenuBarHorizontal li
        margin: 0;
        padding: 0;
        list-style-type: none;
        font-size: 100%;
        position: relative;
        text-align: left;
        cursor: pointer;
        width: auto;
        float: left;
    The rest have been given a width of 15em, so this value may be a good start.
    DESIGN INFORMATION: describes color scheme, borders, fonts
    /* Submenu containers have borders on all sides */
    ul.MenuBarHorizontal ul
        border: 1px solid #CCC;
       width: auto;
        background-attachment: fixed;
    Just keep the border property and remove the other two.
    BROWSER HACKS: the hacks below should not be changed unless you are an expert
    /* HACK FOR IE: to make sure the sub menus show above form controls, we underlay each submenu with an iframe */
    ul.MenuBarHorizontal iframe
        position: absolute;
        z-index: 1010;
    /* HACK FOR IE: to stabilize appearance of menu items; the slash in float is to keep IE 5.0 from parsing */
    @media screen, projection
    ul.MenuBarHorizontal li.MenuBarItemIE
              display: inline;
              f\loat: left;
              background: #FFF;
    The following is the original for the above
    BROWSER HACKS: the hacks below should not be changed unless you are an expert
    /* HACK FOR IE: to make sure the sub menus show above form controls, we underlay each submenu with an iframe */
    ul.MenuBarHorizontal iframe
        position: absolute;
        z-index: 1010;
        filter:alpha(opacity:0.1);
    /* HACK FOR IE: to stabilize appearance of menu items; the slash in float is to keep IE 5.0 from parsing */
    @media screen, projection
        ul.MenuBarHorizontal li.MenuBarItemIE
            display: inline;
            f\loat: left;
            background: #FFF;
    Cheers,
    Gramps

Maybe you are looking for