Infoobject - Setting for Business Explore and its performace

Hello BW-fans,
I am not sure, whether I am here at the right topic or this is a question for Bex-Topic. However it's something to do with data modelling so I firstly put the question here.
I have an example: the InfoObject 0CUST_HIE01 is from SAP-Standard referenced on 0CUSTOMER - it's ok. By selection at query execution, depending on the general settings for Business Explore, especial at "Query Execution Filter Val. Selectn", the content of 0CUST_HIE01 will be showed as the content of master data 0CUSTOMER or the content of 0CUST_HIE01 itself. In our data model it's two different values, so the general settings should be correctly "Only value in InfoProvider" or "only posted value for Navigation".
The problem is the perfomance when I select the filter value at query executation. With those two settings like above it'll take very long time, the voluminous data is updated in InfoProvider the slower the performance will be. In my example is showing the content of master data 0CUSTOMER due to setting "Value in master data table" is very quick but wrong and showing the "posted value in InfoProvider" is correct but it takes very long time.
My question is: Is there any method to upgrade the performance for this case?
Many thanks for answers!
Van Anh Nguyen

Hi,
To avoid that goto the maintaince of that characterstic infoobject and in the Tab Page: Business Explorer set property Filter Selection in Query Execution property to Only Values in InfoProvider so that variable will not fetch all the data instead it will display only required data.
Its becoz "This field tells you how the selection of filter values is determined when a query is executed.
When queries are executed, the selection of filter values is usually determined by the data that is selected by the query. This means that only the values for which data has been selected in the current navigation status are displayed.
In many cases, however, it can be useful to include additional values. Therefore you can also choose the settings Only Values in InfoProvider and Values in Master Data Table. If you make this selection, however, you may get the message “No data found” when you select your filter values."
-Vikram

Similar Messages

  • Trouble Shooting in Business Explorer and its Solution ....

    Hi All BW Experts,
    I would like to have some sample of BW Reporting issue (Data Discrepancies)and how to solve them in General including its solution. Like on Navigation Display and etc, any input is very highly regarded.
    Thank You in Advance
    Kumar

    Hi dear,
    first of all you need to divide the error analysis in several check-areas...
    (WHERE your data is wrong ? in PSA? in data mart section? in the final infoprovider ? only at query level ? at DB level?)
    As you can see, understand WHERE is your problem solves half problem it-self !
    Then look at OSS notes, first of all to verify that there is no std bug in some pgm, or to receive some useful suggestion...
    578379 "Analysis/Required infos for wrong values in BW Query Results"
    565086 "Composite SAP note: Wrong or no data..."
    112458 "Trace log in the Business Explorer"
    Hope it helps!
    Bye,
    Roberto

  • HT4557 I'm trying to set up my iphone for home sharing and its says unable to set up home sharing. My password is correct, I've tried it three times with the same message. Any help?

    I'm trying to set up my iphone for home sharing and its says unable to set up home sharing. My password is correct, I've tried it three times with the same message. Any help?

    Hello daltonfromgbr
    Check out the article below to troubleshoot you issue with connecting to Home Sharing. It will walk you through checking firewall settings as well as your network connection.
    Troubleshooting Home Sharing
    http://support.apple.com/kb/ts2972
    Regards,
    -Norm G.

  • Not able to install onedrive for business, keeps telling its already installed but its not (W7)

    not able to install onedrive for business,  keeps telling its already installed but its not  (W7)
    after a change of the 365 office version OneDrive for business it is not possible to reinstall the software
    it keeps telling me it is already installed.
    I think some settings are still there from the old install.
    how can I remove them or force the reinstall

    yeah finally
    Problem solved! , my tube is back to normal ( to rock )
    all i did is , removed the sys,private,system,resources,data folders from the memory card , switched off my phone , removed the memory card , did a soft reset (*#7370#) and tried to install an application from downloads , i was able to install in the phone memory as memmory card was not inserted then switched off the phone , inserted the memory card and tried to install an application from the downloads, finally i was asked where to install the app. and gave memory card , viola application installed sucessfully
    Regards,
    evil_night13

  • Integration for Business Workflow and SAP Interactive forms by Adobe

    Hi
    Is any of you able to watch the following SDN eLearning Session ?
    <i>Integration for Business Workflow and SAP Interactive forms by Adobe (RIG session 7)</i>
    I can play nearly all the other eBooks, but not this one. Any idea ???
    Regards, bernhard

    I solved the problem.
    It is not possible to view the ebook with IE 7.0. So I removed the new Internet Explorer and everythink is working fine.
    Greetings, Bernhard

  • Which table stores relationship of business roles and its associated roles.

    Hi,
    I want to know the table that stores the relationship between a Business role and its associated roles.
    Please note that i am aware of the table GRACBUSROLESNAP that stores the business role relationship corresponding to a request id and this is not what i am looking for.
    I want to know the table which stores the definition for business role.
    Thanks & Regards,
    Khush Bafna.

    Hi Khush,
    I think table GRACROLERELAT is used to store business role definition.
    Best Regards,
    Aman

  • Accessing to Windows Server 2003 SP2 R2 32-bit from a Windows XP SP3 32-bit leaves a fork of the explorer and its children processes !!!

    When I try to access to Windows Server 2003 SP2 R2 32-bit from a Windows XP SP3 32-bit and then closes the RDP from Windows XP (the client side), a fork of the explorer and its children processes will persist in the server side !!!
    Take a look at the screenshot to understand:
    is this normal behavior !?
    Thank you for your understanding ;)

    Hi,
    I think this is normal behavior.
    You just close the RDP from client side but not log off the server, right?
    Regards.
    Vivian Wang
    Yes, right I closed the RDP from client side, not log off the server.

  • Report for Asset number and its Purahcse order number

    Hello Friends,
    Please give me details of report for Asset number and its Purchase order number .
    Regards
    Nilesh Vakil

    hi,
    GO to ME2N...
    use SHIFT + F4..
    there check for the acc. assign cata. field and input the asset  and execute..
    Regards
    Priyanka.P

  • I'm setting up Apple ids, and its not giving me the option to set up a rescue email. How can I add one?

    I'm setting up Apple IDs, and its not giving me the option to set up a rescue email. I've set up Apple ID's in the past, and its always given me the option. How can I add a rescue email?

    You can find the instructions here. I removed the screenshots but the text is copied below.
    http://support.apple.com/kb/HT5312?viewlocale=en_US&locale=en_US
    You can edit or delete your rescue email address at My Apple ID. To edit your rescue email address:
    Navigate to My Apple ID using your web browser.
    Click "Manage your account"
    When prompted, sign in using your Apple ID and password.
    Click Password & Security
    You'll be asked to answer 2 of your 3 security questions before you can make any modifications. If you are unable to remember your answers, you can choose to send an email to your rescue email to reset your security questions.
    Note: The option to send an email to reset your security questions and answers will not be available if a rescue email address is not provided. You will need to contact iTunes Store support in order to do so. 
    After you've validated your identity by correctly answering your security questions, click Edit to the right of your rescue email address.
    Once you've finished editing your rescue email address, click the Save button directly below the email field.  

  • After upgrade my Iphone 4 to iso5, I can't add contact and I can't access the settings for mail,contacts and calender. The moment I select the setting for Mails, Contact and Calender it will jump back to home. Can someone advice what's wrong with it?

    After upgrade my Iphone 4 to iso5, I can't add contact and I can't access the settings for mail,contacts and calender. The moment I select the setting for Mails, Contact and Calender it will jump back to home. Can someone advice what's wrong with it?Problr

    Dear All
    i have done the same activity ( buy a new iphone 4 -> upgrade to ios5 - > configure email) with success-
    than when i start to move the contacts from old mobile to iphone (using the microsim) i receive the same crash
    in disgnosis e use i saw 2 dump with this title 'latestCrash-Preferences.plist and LatestCrash.plist. in each file the date is the same and i read:
    Exception Tyle: EXC_CRASH (SIGABRT)
    Exception code: 0x00000000, 0x00000000
    Chrashed Thread: 6
    in thread 6: name: Dispatch queue:
    com.apple.addressBookUI.ContactsSettingPlugin
    and thaan a lot of data.
    Have you any idea?
    thank in advance
    Fabio

  • I have everything set for Arabic fonts and the keyboard as well. When I type in WORD or EXCEL I just get individual Arabic letters, but they never connect, they should be for example like this   الس    but they always appear like that ا ل س

    I have everything set for Arabic fonts and the keyboard as well. When I type in WORD or EXCEL I just get individual Arabic letters, but they never connect, they should be for example like this   الس    but they always appear like that ا ل س

    MS Word for Mac has never supported Arabic.  You have to use other apps.  Mellel is best, but Pages 5, TextEdit, Nisus Writer, or Open/LibreOffice should work OK.
    Sometimes you can make Word for Mac do connected Arabic if you are editing a document created with Windows Word.

  • I have been offered cc 2014 for 29.99 and its says contact the support team to see if I qualify - trying to get to the support team option by telephone just seems to send me in a loop - getting pretty disgusted with all the rigmarole just to get a somethi

    I have been offered cc 2014 for 29.99 and its says contact the support team to see if I qualify - trying to get to the support team option by telephone just seems to send me in a loop - getting pretty disgusted with all the rigmarole just to get a something

    This is an open forum, not Adobe support... you need Adobe staff to help
    Adobe contact information - http://helpx.adobe.com/contact.html
    -Select your product and what you need help with
    -Click on the blue box "Still need help? Contact us"
    -or by telephone http://helpx.adobe.com/x-productkb/global/phone-support-orders.html

  • Why such sorry sound quality on iTunes? On some of my purchases the sound level is suppressed on the audio. On others the volume is so low that if I have it set for another song and a new one starts I have to increase the volume to hear it.

    Why such sorry sound quality on iTunes? On some of my purchases the sound level is suppressed on the audio. On others the volume is so low that if I have it set for another song and a new one starts I have to increase the volume to hear it.
    There is so much distortion on some of the music I have to play it with QuickTime to get a "clean" track.
    What can be done to get a consistent volume level or is this another typical Apple product that you have to take what you get and be happy because it's not a Microsoft product?

    If that's the best you can do why don't you get on another forum?

  • What's the best iTunes import setting for highest quality and universality?

    What's the best iTunes import setting for highest quality and universality?

    Highest quality?
    Apple Lossless. (But the files are way big)
    Universality?
    MP3 (choose the bit rate you think sounds best and doesn't take too much space)

  • Substitution rule for Business place and section code

    Hello Friends,
    We have a business place and a section code. I want to write a substituion rule for vendor invoice for business place and section code.
    When i see in header, i am not find BUPLA and SECCO in header. I am finding them in line item. How do i get these fields in header segment. I tried substution rule in line item, but the tds is not deducted.
    Thanks
    SK

    hi SK,
      i am not understand your problem. Previously i face one problem regarding business place and section code. While booking invoices and advance payments the user forgets to specify business place or section code and some times he specifys wrong business place also. Basing on business place or section code we cant restrict the users because there is no authorisation object.
    i created one validation that if my business area is 1000. then substitute the business place field with section code.
    we have business place individual business area wise so i created this substitution.
    Regards,
    Sankar

Maybe you are looking for