InfoObject Text not displaying in BPS Web

Hi Gurus,
We are using a custom InfoObject attribute only characteristics (Only text table). We are using this object in BPS planning. When we launch the BPS_Web and drilldown on this Object, it just shows us the technical value, not the text. We would like the drilldown to show only text. I tried to change the Business Explorer properties for display 'Text'. However it is not helping us.
Please let me know if you have encountered any issues?
Thanks!

Check to see if the table- RSDCHABAS has the entries for the custom infoobject
Short text exists = X
Med-length exists = X
Long text exists = X
populated..
In reply to my previous posts are the std.business content iobjects able to display TEXTS needed??
Hope it helps
Chetan
@CP..

Similar Messages

Text not displayed in the Web Report

Hi All,
I have a query where user is expecting both Key and Text to displayed in the report for the Info object "Local Product High". This infoobject has text data available. But Iam not sure why this is not getting displayed even when I select both Key and Text in the properties screen.Only Key is getting displayed.
Can some one throw some light on this.
Regards,
Srinivas

I juct checked the Text table and I see the texts for the infoobject exists. I do not think CHange run will resolve this issue. but yes the master data is active .
I will now try to run the report through Bex and come back.
Thanks for the input..
regards,
Srinivas

Bex Query timestamp InfoObjects does not display time in Webi

A BW InfoObject, defined as NUMC14 (TIMES), will display data like "09/13/2011 13:40:26" in a Bex Analyzer query.
How do you get this type of display in Webi? Currently, my webi report (based on the Bex query connection) displays the field like "09/13/2011 13"

Hello,
any ideas? Any additional information needed?
Best Regards,
Hannes

Flash Text not displaying certain fonts

Thanks as always…
I am trying to use Flash text for some headings, but after an
hour of pulling my hair out I've just realised it will only display
certain fonts, such as Helvetica etc.
I added the font I want to use to my font list but it still
does not display…
I'm using MX on OSX 10.3.9.
Any ideas? Thansk.
Flash Text not displaying certain fonts

Fodderstompf wrote:
> Thanks guys,
>
> I don't have Flash MX and it turns out the font is a
Postscript Type 1.
>
> Didn't realise about the true-type thing, bit of
nusiance (and completely the
> opposite of the hassle I normally have with print
work!).
>
> I'm gonna look and see I can get a true-type version of
the font (Tabitha), or
> is there any other work around?
>
> Thanks.
>
>
Is your text in a dynamic text box, or static text box in
flash?
I don't think the issue concerns the "true-type" or not
"true-type" font.
In Flash, when text is part of a dynamic text box (which I
assume is the case in your situation),
then the font works just like in an html page:
if the font is installed on the computer it will show, if
not, it won't. The way around this, is to
embed the font data in the authoring flash file, and link it
to the dynamic text box, via actionScript.
So if you cannot work on the authoring Flash file with Flash
MX or Flash8, and if indeed we're
talking about a dynamic text box, your only option is to use
a web-safe font.
seb ( [email protected])
http://webtrans1.com | high-end web
design
An Ingenious WebSite Builder:
http://sitelander.com

Key figure not displaying in SNC Web View

Hi All,
I have added a Key figure in Data Matrix View and its not displaying in SNC Web view- SMI Monitor.
Is there any activation settings after adding key figure in Data Matrix View, please help.
Regards,
Vikram

Hi,
You can try following steps,
1) Clear the Cache & Re-login.
2) Ensure in Setting the Key figure " Invisible" check box is not selected.( SNC 7.0 v)
3) Check the related Product is applicable for the new Key fig added, like if its a SMI Product & you are expecting to see for a PO key figure...
Regards,
Vasu

Why won't voice generated text not display as I speak?

Why won't voice generated text not display on the screen as I speak?

All you get in 10.6.5 is spoken COMMAND recognition.
Dictation requires 10.8 Mountain Lion or later:
Mac Basics: Dictation lets you speak text instead of typing

Siebel Charts gets generated but does not display in the Web client

Siebel Chart is getting generated in NetChart4.6\Server\root\projects\Siebel.chart folder. However does not display on the Web client
There is either no error displayed on the front end...
Also note that Charts is installed on Windows environment and Siebel Server is installed on Linux Server

Dear User,
Thanks for using Oracle communities.
Does this happens in dedicated client as well?
We would need to have traffic captured when you are actually executing actions. The tools like fiddler etc will help here to track the traffic.
I would suggest you open SR with MOS since it will need some analysis on network trace like fiddler. You can refer this thread in SR as well, so that once issue gets resolved thread will get updated with solution which will benefit others.
Best Regards,
Chetan

How to add a scrolling text to display in a web part?

Hi,
I have 3 files in a doc library that is been referenced by a web part xml viewer in a page. I am referring only the xml file.
WarningMessage.xml
<script type="text/javascript" src="http://icare/sites/IT/tst/XmlWebParts/WarningMessage/WarningMessage.js"></script>
WarningMessage.js
<script type="text/javascript">
<
//set the marquee parameters
function init() { rtl_marquee.start(); }
var rtl_marquee_Text = 'JavaScript scrolling text';
var rtl_marquee_Direction = 'left';
var rtl_marquee_Contents='<span style="font-family:Comic Sans MS;font-size:12pt;white-space:nowrap;">' + rtl_marquee_Text + '</span>';
rtl_marquee = new xbMarquee('rtl_marquee', '19px', '90%', 6, 100, rtl_marquee_Direction, 'scroll', rtl_marquee_Contents);
window.setTimeout( init, 200);
</script>
and
xbMarquee.js
document.writeln('<style type="text/css">');
document.writeln(' div.marqueecenter1 { text-align: center; }');
document.writeln(' div.marqueecenter2 { margin- margin-right: auto; }');
document.writeln(' div.marqueeleft1 { text-align: left; }');
document.writeln(' div.marqueeleft2 { margin- margin-right: auto; }');
document.writeln(' div.marqueeright1 { text-align: right; }');
document.writeln(' div.marqueeright2 { margin- margin-right: 0; }');
document.writeln('</style>');
function xbMarquee(id, height, width, scrollAmount, scrollDelay, direction, behavior, html)
this.id = id;
this.scrollAmount = scrollAmount ? scrollAmount : 6;
this.scrollDelay = scrollDelay ? scrollDelay : 85;
this.direction = direction ? direction.toLowerCase() : 'left';
this.behavior = behavior ? behavior.toLowerCase() : 'scroll';
// this.name = 'xbMarquee_' + (++xbMarquee._name);
this.name = id;
this.runId = null;
this.html = html;
this.isHorizontal = ('up,down'.indexOf(this.direction) == -1);
if (typeof(height) == 'number')
this.height = height;
this.heightUnit = 'px';
else if (typeof(height) == 'string')
this.height = parseInt('0' + height, 10);
this.heightUnit = height.toLowerCase().replace(/^[0-9]+/, '');
else
this.height = 100;
this.heightUnit = 'px';
if (typeof(width) == 'number')
this.width = width;
this.widthUnit = 'px';
else if (typeof(width) == 'string')
this.width = parseInt('0' + width, 10);
this.widthUnit = width.toLowerCase().replace(/^[0-9]+/, '');
else
this.width = 100;
this.widthUnit = 'px';
// xbMarquee UI events
this.onmouseover = null;
this.onmouseout = null;
this.onclick = null;
// xbMarquee state events
this.onstart = null;
this.onbounce = null;
var markup = '';
if (document.layers)
markup = '<ilayer id="' + this.id + 'container" name="' + this.id + 'container" ' +
'height="' + height + '" ' +
'width="' + width + '" ' +
'clip="' + width + ', ' + height + '" ' +
'>' +
'<\/ilayer>';
else if (document.body && typeof(document.body.innerHTML) != 'string')
markup = '<div id="' + this.id + 'container" name="' + this.id + 'container" ' +
'style=" ' +
'height: ' + this.height + this.heightUnit + '; ' +
'width: ' + this.width + this.widthUnit + '; ' +
'clip: rect(0px, ' + this.width + this.widthUnit + ', ' + this.height + this.heightUnit + ', 0px); ' +
'">' +
'<div id="' + this.id + '" style="' +
(this.isHorizontal ? 'width:0px;' : '') + // if we scroll horizontally, make the text container as small as possible
'">' +
(this.isHorizontal ? '<nobr>' : '') +
this.html +
(this.isHorizontal ? '<\/nobr>' : '') +
'<\/div>' +
'<\/div>';
else
markup = '<div id="' + this.id + 'container" name="' +
this.id + 'container" ' +
'style=" overflowY: visible; ' +
'height: ' + this.height + this.heightUnit + '; ' +
'width: ' + this.width + this.widthUnit + '; ' +
'clip: rect(0px, ' + this.width + this.widthUnit + ', ' + this.height + this.heightUnit + ', 0px); ' +
'">' +
'<\/div>';
document.write(markup);
window[this.name] = this;
// Class Properties/Methods
xbMarquee._name = -1;
xbMarquee._getInnerSize = function(elm, propName)
var val = 0;
if (document.layers)
// navigator 4
val = elm.document[propName];
else if (elm.style && typeof(elm.style[propName]) == 'number')
// opera
// bug in Opera 6 width/offsetWidth. Use clientWidth
if (propName == 'width' && typeof(elm.clientWidth) == 'number')
val = elm.clientWidth;
else
val = elm.style[propName];
else
//mozilla and IE
switch (propName)
case 'height':
if (typeof(elm.offsetHeight) == 'number')
val = elm.offsetHeight;
break;
case 'width':
if (typeof(elm.offsetWidth) == 'number')
val = elm.offsetWidth;
break;
return val;
xbMarquee.getElm = function(id)
var elm = null;
if (document.getElementById)
elm = document.getElementById(id);
else
elm = document.all[id];
return elm;
xbMarquee.dispatchUIEvent = function (event, marqueeName, eventName)
var marquee = window[marqueeName];
var eventAttr = 'on' + eventName;
if (!marquee)
return false;
if (!event && window.event)
event = window.event;
switch (eventName)
case 'mouseover':
case 'mouseout':
case 'click':
if (marquee[eventAttr])
return marquee['on' + eventName](event);
return false;
xbMarquee.createDispatchEventAttr = function (marqueeName, eventName)
return 'on' + eventName + '="xbMarquee.dispatchUIEvent(event, \'' + marqueeName + '\', \'' + eventName + '\')" ';
// Instance properties/methods
xbMarquee.prototype.start = function ()
var markup = '';
this.stop();
if (!this.dirsign)
if (!document.layers)
this.containerDiv = xbMarquee.getElm(this.id + 'container')
if (typeof(this.containerDiv.innerHTML) != 'string')
return;
// adjust the container size before inner div is filled in
// so IE will not hork the size of percentage units
var parentNode = null;
if (this.containerDiv.parentNode)
parentNode = this.containerDiv.parentNode;
else if (this.containerDiv.parentElement)
parentNode = this.containerDiv.parentElement;
if (parentNode &&
typeof(parentNode.offsetHeight) == 'number' &&
typeof(parentNode.offsetWidth) == 'number')
if (this.heightUnit == '%')
this.containerDiv.style.height =
parentNode.offsetHeight * (this.height/100) + 'px';
if (this.widthUnit == '%')
this.containerDiv.style.width =
parentNode.offsetWidth * (this.width/100) + 'px';
markup += '<div id="' + this.id + '" name="' + this.id + '" ' +
'style=" ' +
//(this.isHorizontal ? 'width:0px;' : '') + // if we scroll horizontally, make the text container as small as possible
'" ' +
xbMarquee.createDispatchEventAttr(this.name, 'mouseover') +
xbMarquee.createDispatchEventAttr(this.name, 'mouseout') +
xbMarquee.createDispatchEventAttr(this.name, 'click') +
'>' +
(this.isHorizontal ? '<nobr>' : '') +
this.html +
(this.isHorizontal ? '<\/nobr>' : '') +
'<\/div>';
this.containerDiv.innerHTML = markup;
this.div = xbMarquee.getElm(this.id);
this.styleObj = this.div.style;
else /* if (document.layers) */
this.containerDiv = document.layers[this.id + 'container'];
markup =
'<layer id="' + this.id + '" name="' + this.id + '" top="0" left="0" ' +
xbMarquee.createDispatchEventAttr(this.name, 'mouseover') +
xbMarquee.createDispatchEventAttr(this.name, 'mouseout') +
xbMarquee.createDispatchEventAttr(this.name, 'click') +
'>' +
(this.isHorizontal ? '<nobr>' : '') +
this.html +
(this.isHorizontal ? '<\/nobr>' : '') +
'<\/layer>';
this.containerDiv.document.write(markup);
this.containerDiv.document.close();
this.div = this.containerDiv.document.layers[this.id];
this.styleObj = this.div;
if (this.isHorizontal && this.height < xbMarquee._getInnerSize(this.div, 'height') )
this.height = xbMarquee._getInnerSize(this.div, 'height')
this.containerDiv.style.height = this.height + this.heightUnit;
this.containerDiv.style.clip = 'rect(0px, ' + this.width + this.widthUnit + ', ' + this.height + this.heightUnit + ', 0px)';
// Start must not run until the page load event has fired
// due to Internet Explorer not setting the height and width of
// the dynamically written content until then
switch (this.direction)
case 'down':
this.dirsign = 1;
this.startAt = -xbMarquee._getInnerSize(this.div, 'height');
this._setTop(this.startAt);
if (this.heightUnit == '%')
this.stopAt = this.height * xbMarquee._getInnerSize(this.containerDiv, 'height') / 100;
else
this.stopAt = this.height;
break;
case 'up':
this.dirsign = -1;
if (this.heightUnit == '%')
this.startAt = this.height * xbMarquee._getInnerSize(this.containerDiv, 'height') / 100;
else
this.startAt = this.height;
this._setTop(this.startAt);
this.stopAt = -xbMarquee._getInnerSize(this.div, 'height');
break;
case 'right':
this.dirsign = 1;
this.startAt = -xbMarquee._getInnerSize(this.div, 'width');
this._setLeft(this.startAt);
if (this.widthUnit == '%')
this.stopAt = this.width * xbMarquee._getInnerSize(this.containerDiv, 'width') / 100;
else
this.stopAt = this.width;
break;
case 'left':
default:
this.dirsign = -1;
if (this.widthUnit == '%')
this.startAt = this.width * xbMarquee._getInnerSize(this.containerDiv, 'width') / 100;
else
this.startAt = this.width
this._setLeft(this.startAt);
// this.stopAt = -xbMarquee._getInnerSize(this.div,'width')*2;
// this method does not work very well with FireFox. offsetWidth property used in this function returns the absolute width of the div container
// instead of the new offsetWidth when innerHTML is added or when the div becomes wider. To overcome this a new span element is added to
// the document body to measure the new offsetwidth and then it is removed.
var temp_span = document.createElement('span');
temp_span.id = 'span_' + this.div.id;
temp_span.innerHTML = this.html;
document.body.appendChild(temp_span);
this.stopAt = - temp_span.firstChild.firstChild.offsetWidth;
document.body.removeChild(temp_span);
break;
this.newPosition = this.startAt;
this.styleObj.visibility = 'visible';
this.newPosition += this.dirsign * this.scrollAmount;
if ( (this.dirsign == 1 && this.newPosition > this.stopAt) ||
(this.dirsign == -1 && this.newPosition < this.stopAt) )
if (this.behavior == 'alternate')
if (this.onbounce)
// fire bounce when alternate changes directions
this.onbounce();
this.dirsign = -this.dirsign;
var temp = this.stopAt;
this.stopAt = this.startAt;
this.startAt = temp;
else
// fire start when position is a start
if (this.onstart)
this.onstart();
this.newPosition = this.startAt;
switch(this.direction)
case 'up':
case 'down':
this._setTop(this.newPosition);
break;
case 'left':
case 'right':
default:
this._setLeft(this.newPosition);
break;
this.runId = setTimeout(this.name + '.start()', this.scrollDelay);
xbMarquee.prototype.stop = function ()
if (this.runId)
clearTimeout(this.runId);
this.runId = null;
xbMarquee.prototype.setInnerHTML = function (html)
if (typeof(this.div.innerHTML) != 'string')
return;
var running = false;
if (this.runId)
running = true;
this.stop();
this.html = html;
this.dirsign = null;
if (running)
this.start();
// fixes standards mode in gecko
// since units are required
if (document.layers)
xbMarquee.prototype._setLeft = function (left)
this.styleObj.left = left;
xbMarquee.prototype._setTop = function (top)
this.styleObj.top = top;
else
xbMarquee.prototype._setLeft = function (left)
this.styleObj.left = left + 'px';
xbMarquee.prototype._setTop = function (top)
this.styleObj.top = top + 'px';
I have nothing displaying in the web-part. How can I make this to work?

This is how i was able to do it. Edit html source.
<div align="center"><marquee id='scroll_news4' bgcolor=#ff9966 "><font color="#000000" size="+1" ><strong>Outlook is down! IT is working on it! </strong></font></marquee></div>
<input type='Button' value='Stop' id ='b1' onClick='button_click()';>
<SCRIPT LANGUAGE="JavaScript">

</script>

Arabic text not displaying correctly in Win Server 2008 R2

Hi,
We have an .mdb database stored on our Windows Server 2008 R2 server but when we view the contents some of the text has strange characters.
When we view the same db in Windows Server 2003 we do not have these characters. I'm not sure what exactly we need to do to correct this issue..
Any suggestions welcome..

Hi,
Thanks for your post.
When you open a Web page or a text file that contains a string of Arabic characters, the string is not displayed correctly. This issue occurs when the following conditions are true:
The Left-to-Right Override (LRO) Unicode control character is used in the string of Arabic characters.
You specify a font that is not Simplified Arabic Fixed.
Please apply the hotfix below:
Incorrectly displayed Arabic characters in Windows 7 or in Windows Server 2008 R2
https://support2.microsoft.com/kb/976525?wa=wsignin1.0
And check the result.
Regards.
Vivian Wang

Safari is not displaying parts of web pages and will not print pdfs

I am using a MacBook Pro running OSX 10.8.3 and Safari 6.0.3. Web pages are sometimes missing elements. Pdfs often do not display correctly and when I try to print them there is nothing there. This started to happen before upgrading to 10.8.3. Any ideas on how to solve the problem? I do not have this problem when using Firefox.

Back up all data.
Triple-click the line of text below to select it, the copy the selected text to the Clipboard (command-C):
/Library/Internet Plug-ins
In the Finder, select
Go ▹ Go to Folder
from the menu bar, or press the key combination shift-command-G. Paste into the text box that opens (command-V), then press return.
From the folder that opens, remove any items that have the letters “PDF” in the name. You may be prompted for your login password. Then quit and relaunch Safari, and test.
The "Silverlight" web plugin distributed by Microsoft can also interfere with PDF display in Safari, so you may need to remove it as well, if it's present.
If you still have the issue, repeat with this line:
~/Library/Internet Plug-ins
If you don’t like the results of this procedure, restore the items from the backup you made before you started. Relaunch Safari again.

PO Material text not displayed in PO

Hi All,
Please help me in finding a solution for my issue,
We use SAP ERP 6.0, and recently upgraded from SRM 4.0 to SRM 7.0. whenever a PO is processed in SRM and replicated to SAP, "Item text" inputs entered in SRM is replicated to "Material PO Text" in SAP and when the PO is printed, those inputs are not displayed in the PO..
However if I amend the same PO again in SRM (by just modifying the inputs in "Item text") and re-replicate to SAP and reprint the PO, the inputs are displayed in PO this time. becoz of this, we had to amend every PO again to have the Item text displayed in PO.
Why the inputs are not displayed in PO at the first time and what made the system to display it after i amend the PO the second time???
Any help is much appreciated.
Thanks
Vinoth

Nabheet, Thanks for your response.
I have already raised this with the tech team and they said they antcipate this to be fixed by this March. I have no idea if this takes so long to fix it. Since we had to process 100s of POs every day, it is affecting our SLA badly
Vinoth

Info Record Text and Material Text not displayed in Subcon. PO printout

Hi,
I have this scenario, where the Info record text from Info Record PO text does not appear in Print out but appears in Print preview.
Also the Info record text for standard Purchase order is displayed in Print preview and Print output.
The config settings for texts for Purchase order is the same for Purchase order with no Item Category (Standard) and Subcontracting (item category L).
Also the texts in Purchase order automatically copies in Standard purchase order (adopt button not present) but not in Subcontract purchase order (Adopt text is present).
I have checked the config for copying rule, for Info record text is automatically adopt.
I am unable to identify the missing config for this.
Also the same problem exists for Material text from Material Master PO text is not displayed in Fax output but appears in Print output.
Please let me have your inptus,
Regards, Muthuvel

The solution to this is SPRO->SAP Reference IMG->Materials Management->Purchasing->Messages
->Text for Messages->Define Text for Purchase Order.
Select Texts for Document Item folder - There will be a list by Document Type and Item Category. Make sure there are entries for your combination, otherwise they will not be part of the output message.

Newly Created Infoobjects are not displaying in the RSA1

Dear Experts,
When ever i am trying to create a new Info Object Characterstic/Keyfigure, i am able to create and activate it sucess fully, but when i am trying to see the same in corresponding infoobjects catelog in RSA1 that object is not displaying there.
When i am trying to find the same using "FIND' Option it is returing 'No Entries' as result even though i am sure that obj is created.
Please help me in this context.
Regards,
Rajkandula

Have you created that Infoobjects under a specific Catalog.If it is true try to find that catalog and you can find the Infoobjects there. If it is not true they will be under Unassigned nodes. Otherwise refresh your transaction once and try to find the Infoobject with find option.
I hope it will help you.
JM Krishna

Text not displaying on components

I have one swf file where im using the default textInput and
button components. Just so the user can enter a zip code and click
submit. When i publish that swf, everything looks fine. The problem
is that i am loading that swf into a master swf and when i view it
through the master swf, it displays the components without text.
The submit button is blank, it should say 'submit' on it, and no
characters display when you type into the textInput component. I am
able to type characters and submit the form, but i can't see what
im typing. I've tried messing with embedding fonts in the child swf
as well as the master to no avail. If anyone has any suggestions,
they would be greatly appreciated.

Here's how to talk to your dynamic text box. Where you put
this bit depends
on how you are building the preloader, but since you say the
progress bar
works fine, I'll assume you know what you're doing there and
will be able to
get this in the right spot.
// variable that calculates a number for the percent loaded
preloaded = Math.floor((loadedBytes/totalBytes)*100);
// this line is talking to a dynamic text box named
"percentage_txt" that is
inside a movieClip named "preloader_mc" on the root timeline
// depending on your setup the path may be different, but
make sure
everything on the way to the text box is named
_root.preloader_mc.percentage_txt.text = preloaded + "%";
// You've probably left out the ".text = " bit. Just a guess,
but that's
the bit I always find
// I've left out when I'm having trouble with dynamic text.
// Also make sure your text color is not set to the same
color as your
background. Duh.
Good luck.
--KB
"patbegg" <[email protected]> wrote in
message
news:ejuu12$bmd$[email protected]..
> Hi,
> Cheeky little problem. I cannot get the dynamix text to
show on the
> preloader
> of a loaded movie. I am calling in a .swf which has a
preloader in it, the
> progress bar is fine but the text showing the percent
will not display.
>
> I have tried the _lockroot method, but no joy. Any ideas
anyone?
>
> Any help appreciated guys.
>
> Cheers,
> Pat
>

TextArea text not displayed correctly with ImageSnapshot

I am having an issue with the ImageSnapshot.captureImage command capturing the text in a TextArea. Attached are two files illustrating the issue. The "screenshot.jpg" pic shows how the TextArea controls are displayed on the screen. The "created jpg.jpg" pic shows how the text is displayed in the jpg that is created. Below is the code that creates the snapshot, everything is pretty standard there as far as I can tell. The text is obviously not sized the same from one to the other. Any ideas whats going on here or what I can do to correct it?
var myencoder:JPEGEncoder = new JPEGEncoder(50);
var imgss:ImageSnapshot = ImageSnapshot.captureImage(viewstack.selectedChild, 100, myencoder);
var fs:FileStream = new FileStream();
var ssfile:File = File.applicationStorageDirectory.resolvePath("ProjectImages/snapshot.jpg");
fs.open(ssfile, FileMode.WRITE);
fs.writeBytes(imgss.data, 0, imgss.data.length);
fs.close();
Thanks,
Scott

Scott,
Can you file a bug? http://bugs.adobe.com/flex
Thanks,
Jason

InfoObject Text not displaying in BPS Web

Similar Messages

Maybe you are looking for