InfoPackage error for Hierarchy data loads after upgrading to BI 7.31

Hi All,
We have recently upgraed to BI 7.31 from BI 7.01. After the upgrade we are observing info package error while loading the Hierarchy for 0BPARTNER infoobject, below is the long text for the error message.
Datasource name : 0BPARTNER_NAME_HIER
Error in the hierarchy structure: see error log
Message no. RH003
Diagnosis
The structure of the hierarchy contains errors. You can find a detailed description of the error in the log.
Procedure
Correct the error in the hierarchy structure as described in the log.
Screenshot for the Infopackage Details tab,
The error message suggests checking the error log, but there are no error logs to be reffered.
Please let us know if anyone have faced similar issue and help us resolving the same. Also let us know where to find the error log in such scenario.
We have already tried replicating the data source at BW side, but no success. We also checked the extractor at source system side and found it to be working alright.
Thanks & Regards,
Viraj

Hi Viraj,
Did you find a solution for your problem ?
Even am facing the same issue .Process chain is running fine without throwing any errors but if i try to run manually it getting failed.
when we check the data few of the nodes are not getting reflected which are maintained in source.
Error Message : Error in the hierarchy structure.
Source system : Extraction check performed and the record count is matching. We took the dump of data and where able to find the required data but in the maintain hierarchies it is not getting reflected
Could you please help me in the solution.
Thank you
Regards,
Madhav

Similar Messages

  • "HDCP content won't play on this display" error for all purchased content after upgrading to Yosemite

    Using my 2013 Mac Pro with a 27" Cinema Display, I'm now getting an error that tells me that my display isn't authorized for HDCP content.
    This is the same machine I've been using right along to watch my iTunes content with no configuration or hardware changes... the only difference is the switch to Yosemite and the accompanying iTunes upgrade.
    I've tried the basics - rebooting, reconnecting the display etc - but based on the circumstances it feels more like a bug than something I'll be able to impact.
    Anyone?

    The issue is from Safari defaulting to HTML5 vs using Silverlight like it did in Mavericks.
    So the options are, if you want to use Safari goto your Netflix account, playback preferences and turn off HTML5. This will revert to Silverlight and will AirPlay fine*in Safari.
    If you want to use HTML5, just leave the setting for HTML5 on in Netflix and use Chrome, Firefox, etc.
    You can't currently have both Safari and HTML5 Netflix when using AirPlay. You'd think Safari would be a little bit more powerful with Apples stances on browser extensions.

  • Deinstall Error for Old Grid Home after Upgrade from 11.2.0.1 to 11.2.0.2

    Hi,
    I just upgraded from 11.2.0.1 to 11.2.0.2, both the grid infrastructure and the databases, using out-of-place upgrade. There were no errors during the upgrade and was able to deinstall the old database homes with no issues. The configuration we have is two standalone database servers connected to a clustered ASM array.
    Now I'm trying to remove the old grid infrastructure home using deinstall. I get the following exception in the log file:
    [main] [ 2010-11-17 09:51:50.533 EST ] [CRSDeconfig.getOracleUserGroup:876] Reading Oracle user and group name property values
    [main] [ 2010-11-17 09:51:50.533 EST ] [CRSDeconfig.getOracleUserGroup:887] ORACLE_OWNER = grid
    [main] [ 2010-11-17 09:51:50.534 EST ] [CRSDeconfig.getOracleUserGroup:925] ORA_DBA_GROUP = oinstall
    [Thread-32] [ 2010-11-17 09:51:50.542 EST ] [StreamReader.run:61] In StreamReader.run
    [Thread-31] [ 2010-11-17 09:51:50.542 EST ] [StreamReader.run:61] In StreamReader.run
    [Thread-31] [ 2010-11-17 09:51:50.980 EST ] [StreamReader.run:65] OUTPUT>NAME=ora.prd11gr2.db
    [Thread-31] [ 2010-11-17 09:51:50.981 EST ] [StreamReader.run:65] OUTPUT>TYPE=ora.database.type
    [Thread-31] [ 2010-11-17 09:51:50.981 EST ] [StreamReader.run:65] OUTPUT>TARGET=ONLINE
    [Thread-31] [ 2010-11-17 09:51:50.981 EST ] [StreamReader.run:65] OUTPUT>STATE=ONLINE on node1
    [Thread-31] [ 2010-11-17 09:51:50.981 EST ] [StreamReader.run:65] OUTPUT>
    [Thread-31] [ 2010-11-17 09:51:50.981 EST ] [StreamReader.run:65] OUTPUT>NAME=ora.tst11gr2.db
    [Thread-31] [ 2010-11-17 09:51:50.982 EST ] [StreamReader.run:65] OUTPUT>TYPE=ora.database.type
    [Thread-31] [ 2010-11-17 09:51:50.982 EST ] [StreamReader.run:65] OUTPUT>TARGET=ONLINE
    [Thread-31] [ 2010-11-17 09:51:50.982 EST ] [StreamReader.run:65] OUTPUT>STATE=ONLINE on node2
    [Thread-31] [ 2010-11-17 09:51:50.982 EST ] [StreamReader.run:65] OUTPUT>
    [main] [ 2010-11-17 09:51:51.086 EST ] [CRSDeconfig.verifyRACDatabases:2570] You must delete or downgrade the Oracle RAC databases and de-install the Oracle RAC homes before attempting to remove the Oracle Clusterware homes.
    [main] [ 2010-11-17 09:51:51.086 EST ] [CRSDeconfig.checkConfig:201] Setting DC flag back to false
    java.lang.reflect.InvocationTargetException
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:585)
    at oracle.install.db.deinstall.wrapper.clusterDeconfig.callCheckImpl(clusterDeconfig.java:756)
    at oracle.install.db.deinstall.wrapper.clusterDeconfig.main(clusterDeconfig.java:329)
    Caused by: oracle.ops.util.FatalException: You must delete or downgrade the Oracle RAC databases and de-install the Oracle RAC homes before attempting to remove the Oracle Clusterware homes.
    at oracle.ops.util.CRSDeconfig.verifyRACDatabases(CRSDeconfig.java:2573)
    at oracle.ops.util.CRSDeconfig.checkConfig(CRSDeconfig.java:236)
    at oracle.ops.util.CRSDeconfig.checkConfig(CRSDeconfig.java:198)
    Any idea what I missed during the upgrade that makes the deinstall fail?
    Thank you!

    Hi,
    if you upgrade you will not deinstall the old home, but simply remove it with rm.
    There should be a MOS Note describing the procedure (It might be necessary as well to update the inventory).
    Unfortunately don't have access to MOS atm...
    Sebastian

  • Data extraction after upgradation

    Hello All,
            iam suppose to do testing data flow after upgradation and iam new to this please experts correct me i am  wrong  what i understand is there some R/3 programm's which need to be triggered manually which in schedule the job and event collector in BW collects the data .Before that we need to intialize the delta process from infopackage and after job is triggered by programe i need to run delta process.iam not sure whether this is way it works.please confirm and suggest me if iam wrong.
    Thanks & Regards
      Priya

    Hi Priya,
    You have to clear all the delta queues and unschedule all the process chains before starting the upgradation to BI7 .
    And after upgradation reschedule the process chains and pull the deltas and full loads. Initialize the delta before loading the deltas also check the same in RSA7 in source system. Also execute all the reports required.
    Also check these links:
    https://www.sdn.sap.com/irj/sdn/wiki?path=/display/bi/bi%2bupgradation-helpful%2boss%2bnotes%2bfrom%2bedw%2bperspective
    Effect on BW of R/3 Upgrade
    BI 7.0 –Initial Hurdles
    Bw 3.5 upgrade help
    Hope this helps............
    Rgs,
    I.R.K

  • Why has my ipad lost connectivity to the AT&T cellular data network after upgrading to iOS 8.1.2?  My iPad is model #MD367LL/A, 32 GB WIFI + Cellular, about 2-1/2 years old.

    Why has my ipad lost connectivity to the AT&T cellular data network after upgrading to iOS 8.1.2?  My iPad is model #MD367LL/A, 32 GB WIFI + Cellular, about 2-1/2 years old. It;s been working perfectly up until now.  I have no problem on my home WIFI, or through personal hotspot working through my iPhone 5.
    I have worked with AT&T, replaced the SIM card with a new one, and done a backup/restore to factory settings, all with the same result that when I turn Cellular
    Data on, with or without Enable LTE, it goes into "searching" mode, or reports "no service".  My iPhone 5 works perfectly on iOS 8.1.2, on Cellular.  I've browsed the blogs and have tried Apple's suggested fix, all to no result. 
    Oddly enough, every once in a while I do get connected to the network for a short ime (minutes), but it always returns to "searching".
    I've filed a report with Apple, along with a request that they contact me, but no results yet.
    Help? (and thank you).

    Hello razmee209.  Thank you for your response.  I spent the better part of yesterday working with Apple Support.  They tried their best, to include backing up photos to my HP laptop, backing up the iPad to iCloud, then resetting the iPad in total.  Same problem.  I restored from the cloud to recover my apps, same problem.
    AT&T installed a new sim card - same problem.  I spent time with AT&T Support yesterday, too.  In both cases, (Apple and AT&T) the support techs who worked with me were extremely polite, courteous and helpful to the best of their abilities, but I think the problem lies deeper, and nobody at Apple is admitting they have a problem with iOS 8, that I'm aware of.
    I didn't have this issue before I upgraded to iOS 8.1.2.
    Everything else with the iPad works fine:  WIFI, Personal Hotspot, email, all my apps, etc.
    In browsing the web for this issue I see that many other folks have the same problem.  I filed a report with Apple this morning, requesting that they contact me, but no word yet.  I was going to go to iPhone 6, and had been considering the iPad Air 2, but I see reports of this problem with those units as well.
    At this point I don't think I'll be spending any more money with Apple, at least not till this issue is resolved.
    Thanks again for your response and suggestions.

  • Webcam not working for Macbook Air 2013 after upgrading to OSX Mavericks? Yahoo/ Google/Skype cam chats not working. Facetime works though. Any updates of Mavericks released to fix this?

    Webcam not working for Macbook Air 2013 after upgrading to OSX Mavericks? Yahoo/ Google/Skype cam chats not working. Facetime works though. Any updates of Mavericks released to fix this?

    I have a MacBook Pro Retina display: 15.4-inch late 2015 with OS X Mavericks install, only on second week. 
    Insight works on FaceTime, Skype, but yahoo program does not show insight cam in dropped down.
    Now when I got my new MacBook Pro, I down loaded all new Skype (worked tested), FaceTime (Worked Tested), Yahoo (not worked)
    Fix:
    With the new Maverick you have to use there messager program Version 8.0 (4218). Once I add my yahoo account video works again.
    It also supported AOL, AIM, Google Talk, Jabber.
    Guess I miss it frist time... hope this helps...

  • Meta dates in AlbumData.xml (date problems after upgrade)

    HI folk,
    Further to my post earlier today about the date mashup after upgrading, I was wondering if a [careful!] edit of the AlbumData.xml file might help.
    If I knew what these fields meant I might be able to work out what to do...
    <key>DateAsTimerInterval</key>
    <real>9850139.000000</real>
    <key>ModDateAsTimerInterval</key>
    <real>206299947.507982</real>
    <key>MetaModDateAsTimerInterval</key>
    <real>206299831.664670</real>
    Which one (if any of these) does iPhoto use when deciding what order to display the photos in? And what are the numbers? Seconds since 1984? Picoseconds since the Woz left the company? Curious minds want to know.
    And yes, I'd use a backup for experimentation.
    Rob

    Rob,
    That timestamp is probably based on the [Unix Epoch|http://en.wikipedia.org/wiki/Unix_time], the basis for almost all time stamps in programs based on Unix and/or the C programming language. If those dates are in fact based on the Unix epoch, they are based on the number of seconds since Jan1, 1970.
    Sometimes such dates are represented as integers (like DateAsTimerInterval seems to be) and sometimes they are represented as floating point numbers (like the other two) in an attempt to circumvent the Year 2038 problem.
    You may find this useful: [http://www.unixtimestamp.com>
    Personally, I would love to find out how your experimentation goes - what fails and what works; if you have to go through any hoops to get iPhoto to recognize your changes; if exporting a photo changes its EXIF timestamps after you play with the XML file, etc.
    nathan

  • After upgrading to ios 8.1.1 my ipad 4 camera doesnt work i just got blank screen, but i still can use it for facetime, i supposed after upgrading to ios 8.1.2 it will fix but it doesnt work. i cannot restore to ios 7. hopefully, any suggestion to co

    after upgrading to ios 8.1.1 my ipad 4 camera doesnt work i just got blank screen, but i still can use it for facetime, i supposed after upgrading to ios 8.1.2 it will fix but it doesnt work. i cannot restore to ios 7. hopefully, any suggestion to correct it?  thank you

    Hello pichastos,
    Thanks for using Apple Support Communities.
    To troubleshoot this issue where your camera is displaying a black screen, please follow the information outlined below.
    You see a closed lens or black screen
    If you see a closed lens or black screen when you open the Camera app, try these steps:
    Make sure that there’s nothing blocking the camera lens. If you’re using a case, try removing it.
    Force the app to close, then open the Camera app again.
    Restart your device, then open the Camera app again.
    If your device has a front and rear camera, try both cameras by tapping  (camera swap icon). If you see the closed lens or black screen on only one camera, take your device to an Apple Retail Store or Authorized Service Provider for more help.
    Get help with the camera on your iPhone, iPad, or iPod touch - Apple Support
    Take care,
    Alex H.

  • Getting error in sdp94 " data partly after horizon" any suggetionu2026

    Hi gurus,
    i have changed period in SBP and  in SE38 planning area initialization in variants changed  /SAPAPO/TS_PAREA_INITIALIZ ) , still getting error in sdp94 " data partly after horizon" any suggetionu2026
    babu

    Hi Babu,
    Kindly check till when is the planning area initialized. Goto //msdp_admin, right click on the planning area---> Created time series objects. Check the date till when it is initialized. You can save the data only if it's in this period. In the planning book there may be dates after the planning horizon also in which case you can't save data.
    Thanks and Regards,
    Nithin.

  • How to rectify the errors in master data loads & transactional data loads?

    hy,
    please any one tell me
    How to rectify the errors in master data loads & transactional data loads?
    thnQ
    Ravi

    Hi,
    Please post specific questions in the forum.
    Please explain the error you are getting.
    -Vikram

  • Error in Master data load because of ###

    Hello,
    I am getting an error in master data load.
    The problem is ####### symbols are encountered in few records.
    We have defined a formula to replace the ### with S in transfer structure.
    But still it does not replace the #### symbols and gives error.
    But when I insert the ####### symbols manually in PSA and try to load it is replaced with the formula definition and loads the data.
    Suggestions required urgently…
    Thanks in advance
    Ram

    Hello srikanth,
    Check the code below.
    I have used it in the update rule to replace the #### symbol with A.
    But when i check in debug mode it is not recognizing this symbol and sy-subrc ia always 4.
    GV_STRING = COMM_STRUCTURE-/BIC/XXX
    FIND '#' in R_STRING.
    IF SY-SUBRC = 0.
    REPLACE ALL OCCURRENCES OF '#' in R_STRING with 'A'.
    ENDIF.
    result value of the routine
      RESULT = R_STRING
    Thanks
    Ram

  • Apple Mail Search and Spotlight do not work for locating email messages after upgrading to Lion 10.8.3.

    Apple Mail Search and Spotlight do not work for locating email messages after upgrading to Lion 10.8.3 on my 27" iMac.
    When searching in Apple Mail, sometimes a get a few results (with many missing), and sometimes no results at all.
    I had absolutely no problems before with Snow Loepard.
    I have reindexed mail and my startup drive. I have followed discussions regarding this matter and tried everything - a waste of time.
    This is VERY serious for me - I have many thousands of messages that I archive and need to reference for work and clients, and now I cannot find them.

    I found out that I needed a $100 mini displayport to dual-link dvi adapter to make my $30" cinema display work with my macbook pro
    http://store.apple.com/us/product/MB571Z/A/mini-displayport-to-dual-link-dvi-ada pter?fnode=51
    When I found out that solved the problem, I took it back because that was too expensive for a stupid adapter, and it still didn't work perfectly.

  • Old emails won't load after upgrade to Mountain Lion

    old emails won't load after upgrade to Mountain Lion

    See if anything in here will fix it:
    1. Hold down the Command and Option keys as you click the iPhoto icon.
    The Photo Library First Aid window opens:

  • Last Data packet for the data load.

    Hi All,
    How to find the last data packet loaded to target for the data load in SAP BI? In the Table?
    Thank you,
    Adhvi

    Hi Adhvirao,
    When u r loading the data from ECC go to monitor ---> details ---> check the data pacaket which are failed double click on that data packet then in bottom u will able to see the IDOC no for ecc side which are pending in ecc containing some data. you can excute them manually to BI side thorgh BD87.
    Thanks,
    Deepak

  • Linksys Easy Link Advisor for WRT310N Wireless Router after upgrading to Windows 7 (64bit)

    I can't reinstall Linksys Easy Link Advisor for WRT310N Wireless Router after upgrading to Windows 7 (64bit).  When I went to Linksys site for solution for new drivers, it asked me for Hardware Version Number.  This model doesn't show one.  Any thoughts?
    Thanks!

    Sabertooth is right. If you are able to go online from your Router then you don't need to install LELA software on your Computer.

Maybe you are looking for