Infopackage errors
Hi Friends,
Iam trying to correct one process chain,the infopackage is getting failed with the following messages:
-Error 7 when sending an IDoc
-System error occurred during lock management 1
Any suggestions?
Best Regards,
Keerthi.
Hi...
The Error 7 will generally come while
lock in the
"Number of requests passed to the update process"
It also might be due to
lock or long waitining of ORA
Just go to ST22 and check it out the more detailed about this..
Just check the dependent process to rectify the locks..
Thanks
Vishnu
Similar Messages
-
InfoPackage error 8...?
Hi Experts,
Could you please explain about infopackage errors,like infopackage error 8,error 4,etc,.
Thank u
Reddy.
Message was edited by:
Jangareddy dasariHi,
Goto Tcode SU01 for that user you need to go to the Logon Data tab and check what is the User Type. Is it currently Communications in your system? You will need to make it System
Please go through link
Error when i was creating a process chain
Error-no 8 with process chain
It would help you.
Regards
Prasad -
Upload Csv files with infopackages - Error 1
Hello again,
i'm trying to upload csv file into a infopackage with master data text but the sistem sends a error message "Error 1 uploading external data".
Infopackage settings:
source system: PC
file type: data file
csv file
data separator ;
ESC signal "
a created a txt file with data separated with ; and later converted txt file into a csv file.
can anybody help me pls?
Thanks
Silvia MarquesHi Silvia,
If the fields are correct in the transfer structure (only 2 fields). Then check whether the field length and type has been defined correctly for both the fields.
If thats not a problem then try to load only upto PSA.
If you are using IDOC as your transfer method then go to the "details" tab of the monitor of the error request and see the details. It will give you the correct picture of the error.
Bye
Dinesh. -
Error in InfoPackage: Error when uploading Flat Files
Hello Experts,
I encoutered this error in Info Package when uploading a flat file.
When i try to click on the "Preview" button, this errors appear:
"Error 8 when compiling the upload program: Row
237, message: Data Type / BIC/ CCCBMA1_COCTR2 was found in a newer"
Please help to advise what is this error about and how to resolve this?hi Annie,
run RSA1 and try again
Error when compiling the upload program (Message no. RSAR233)
other similar problem solved by run program(SE38)RS_TRANSTRU_ACTIVATE_ALL and relogon
A newer version of the data type error when loading
Flat File Preview error message
Error when loading from Flat File
Error message when previewing data in InfoPackage
hope this helps. -
InfoPackage error message "Subsequent update (requests) : Status unknown "
After running an InfoPackage the status is set to green, but when you look at the Details tab you see an error message "Subsequent update (requests) : Status unknown " and "With DTP in InfoProvider ZHRPYO00 : Further processed " under it. We did not used to get this error message and don't quite understand why are we getting it now. Could someone explain, please?
Thanks!
LudaHi,
Usually this error could be while loading the DSO or loading DSO first and then to other infoprovider.
Error message tab at the monitor should give you clear error message where it went wrong. check this tab.
some time while activating the data this may fail for the DSO object. or some time due to authorization problem to load the data automatically from the DSO to infocubes.
If possible let me know what is error message.
Regards,
Vishwa. -
Dear all,
for ervery time I click into Start in tag schedule of any infopackage, I catch this problem:
Runtime errors UNCAUGHT_EXCEPTION
Excep. CX_RSR_X_MESSAGE
the taken picture http://www.4freeimagehost.com/show.php?i=b358394cd8ce.gif
Please help me
Thanks,
Chuong Hoanggo to t.code ST22 to rectify / view the dump error
or the other option is
i am not sure whether it is a program/ function module
try this - rs_find_isosmbp_dupec
Message was edited by:
cs ramesh -
InfoPackage error for Hierarchy data loads after upgrading to BI 7.31
Hi All,
We have recently upgraed to BI 7.31 from BI 7.01. After the upgrade we are observing info package error while loading the Hierarchy for 0BPARTNER infoobject, below is the long text for the error message.
Datasource name : 0BPARTNER_NAME_HIER
Error in the hierarchy structure: see error log
Message no. RH003
Diagnosis
The structure of the hierarchy contains errors. You can find a detailed description of the error in the log.
Procedure
Correct the error in the hierarchy structure as described in the log.
Screenshot for the Infopackage Details tab,
The error message suggests checking the error log, but there are no error logs to be reffered.
Please let us know if anyone have faced similar issue and help us resolving the same. Also let us know where to find the error log in such scenario.
We have already tried replicating the data source at BW side, but no success. We also checked the extractor at source system side and found it to be working alright.
Thanks & Regards,
VirajHi Viraj,
Did you find a solution for your problem ?
Even am facing the same issue .Process chain is running fine without throwing any errors but if i try to run manually it getting failed.
when we check the data few of the nodes are not getting reflected which are maintained in source.
Error Message : Error in the hierarchy structure.
Source system : Extraction check performed and the record count is matching. We took the dump of data and where able to find the required data but in the maintain hierarchies it is not getting reflected
Could you please help me in the solution.
Thank you
Regards,
Madhav -
Execute infopackage error, using custom FM Datasource
hi, experts,
I have a problem with the data load from FM datasource to psa. (sourcesystem is oneself BI system).
Moitor status message:
Request still running
Diagnosis
No errors found. The current process has probably not finished yet.
System Response
The ALE inbox of BI is identical to the ALE outbox of the source system
or
the maximum wait time for this request has not yet been exceeded
or
the background job has not yet finished in the source system.
Current status
in the source system .
Moitor Details message:
Requests (messages): Everything OK
Extraction (messages): Missing messages
Data request received
Data selection scheduled
104 Records sent ( 104 Records received )
Missing message: Selection completed
Transfer (IDocs and TRFC): Everything OK
Processing (data packet): Everything OK
job log:
Job started
Step 001 started (program SBIE0001, variant &0000000001394, user ID sunsh)
Asynchronous transmission of info IDoc 2 in task 0001 (0 parallel tasks)
DATASOURCE = ZDST_DETAILDAYS
Call customer enhancement EXIT_SAPLRSAP_001 (CMOD) with 104 records
Result of customer enhancement: 104 records
Asynchronous send of data package 1 in task 0002 (1 parallel tasks)
tRFC: Data Package = 0, TID = , Duration = 00:00:02, ARFCSTATE =
tRFC: Start = 2009/10/13 09:43:22, End = 2009/10/13 09:43:24
tRFC: Data Package = 1, TID = 0A00920601194AD3DB3C19D6, Duration = 00:00:00, ARFCSTATE = RECORDED
tRFC: Start = 2009/10/13 09:43:24, End = 2009/10/13 09:43:24
Asynchronous transmission of info IDoc 3 in task 0003 (0 parallel tasks)
I have validate the data using RSA3, that is OK, and the data already load to PSA table and can be display, but the status aways "yellow".
I have re-active and replicate the datasource .
can someone tell me how to solve this issue ?
thanks in advance
xwu.hi, Ansel
if not return any data, the exception NO_MORE_DATA will be raised correctly.
but it contain 104 records, the FM code like , :
call function GET_DATA
IF SY-SUBRC <> 0.
RAISE NO_MORE_DATA.
ENDIF.
S_COUNTER_DATAPAKID = S_COUNTER_DATAPAKID + 1.
maybe the FM contains some error, verify using RSA3 that is ok.
thanks a lot.
Edited by: xwu wu on Oct 14, 2009 8:23 AM -
Hi Experts,
i have one process chian in production system and it's a MD delta load Infopackage,it was running since 15 hours and failed.
i want to load data to this infopackage and there are 6 metachains under this failed infopackage metachain.
can you please give me ur advice.?
Full points will be assigned.
Thanks
LaxmanHello Gandewar,
i don't have proper authorization to check those transactions in BW and ISU Source system.
This is a MD Attribute infopackage and i can't see the bad request in manager tab.can u tell me how to see the bad request.?
I think for MD ATTR datasources,we can't repeat the infopackage and we need todo init without datatransfer manually and run the delta infopackage again.so,that we can load the data.
please correct me if i am wrong.Do we need to do init with or without data?
As i told u ,there are several metachains are under this infopackage.?
Please guide me,how to do it.
P.S: It is a production system.
thanks
lakshmi -
Dataload: InfoPackage Error
Hi Guys,
I am trying to extract data from 2LIS_03_BF. I got the below errors when loading data into a custom ODS.
Following are the errors in the status tab of the monitor:
Data records for package 1 selected in PSA - 1 error(S) (RSM2 704)
Error 1 in the update. (RSAR 119)
Following are the errors in the details tab:
Processing (data packet): Errors occured
-Update rules (400 -> 0 Records): Errors occured
-Data records for package 1 selected in PSA -1 error(s)
-Record 0: No RETURNCODE <> 0 allowed in update routines in transfer mode
Processing end:
-Error 1 in the update
-Error 1 in the update
When i checked in PSA,all records have their status light - Green.What is the reason for the errors.
Any help is greatly appreciated.Hi Govind,
Does your data get loaded fine upto the PSA?. If yes, then you do not have a tablespace problem. If no, it might be case of tablespace problem.
For tablespace you have 2 options:
1. Talk to your basis and increase the tablespace and continue the load.
2. Directly load the data into the data target - not advisable as you would not be able to reconstruct the data in future.
In case if it is not a table space problem then go to the details tab in the monitor of the request and see each step. The error would be described there.
Bye
Dinesh.
Message was edited by: Dinesh Lalchand -
Infopackage error in process chains
Hi Friends,
Iam trying to correct one process chain,Infopackage is getting failed with the following message:
Job in the source system uncompletedly-> Request is put on red
Could you pls advice.
Keerthi.Probably the job is getting cancelled in the source system.
Take this request no, and serch the job with request no. in the SOURCE SYSTEM. See the reason why it is failing. Act accordingly. In most cases, we need to start the load and it completes successfully.
Thanks...
Shambhu -
Hi Guys
I want to transport my InfoPackage + 'Only Necessary objects'via the Transport Connection from Development system to QA but I get the following msg:
Object ZPAK_7N7CSZLN7VXQWQO7B172O7JDA does not exist in objekt version M for object type InfoPackage (ISIP.
Please help
Regards
DavidVhi,
if you are going to transport datasource assignment, transfer rules, you can't use infopackage as starting point, you can use infosource as starting point, before transport infosource, transfer rules and datasource assignment, make sure you have 'replicate datasource' for that datasource in your target system (qas/production).
try use infosource as starting point, collection mode 'manual', grouping 'in dataflow before', and make sure your source system(r/3) is marked, click 'assign source system' (button yellow box with 'x').
'execute', after objects collection finished, expand the infosource and make sure transfer rules, datasource, infopackage are marked.
there is bw transport tips doc
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3010ba90-0201-0010-2896-e58547c6757e
also check sap help
http://help.sap.com/saphelp_nw2004s/helpdata/en/57/38e1824eb711d182bf0000e829fbfe/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/0b/5ee7377a98c17fe10000009b38f842/content.htm
later when you deal with bex(reporting) objects transport, it's a bit different, check
http://help.sap.com/saphelp_nw2004s/helpdata/en/38/5ee7377a98c17fe10000009b38f842/frameset.htm
hope this helps. -
Error while creating INFOPACKAGE to load transaction data
Hi,
I am getting the following error while creating infopackage:
"Error in Conversion exit CONVERSION_EXIT_CUNIT_INPUT"
I am getting this error when I click on the Start button under the schedule tab in the screen Administrator Workbench: Modelling.
I clicked on Monitor icon to view the diagnosis. The diagnosis is mentioned below:
the screen is Performance Assistant Window and the diagnosis message appears in italics.
<i>Message No RSAR137
DIAGNOSIS
An error occurred in record 1 during execution of conversion exit CONVERSION_EXIT_CUNIT_INPUT for field UNIT.
Procedure
Check that the record where error occurred has the correct format and correct it accordingly. </i>
Please note that I have succesfully created update rules as I didn't get any error.
Also I would like some one to explain me clearly the differences between transfer rules and update rules with a clear explanation please.
Please help me.
Thank you.
Tristan.Hello Tristan,
I was used to get the same kind of problems before.
I got the problem with the data source type-Flat File (.csv)
One solution that I have done:
1) checked the particular record in which the error message refer to
2) tested the particular unit from the transaction se37
Function Module = CONVERSION_EXIT_CUNIT_INPUT
Press F8 in order to execute
This would be help a bit
3) corrected data from the flat file
another alternative solution was by:
handling the data using routine in the transfer rules
For my case, before executing the InfoPackage, data from flat file could be previewed. At this point, I could check which records caused the problems.
I'm not sure about your case whether data came from which type of data source.
That's all I could share for now.
-WJ- -
Hello,
i am trying to load flat file data for some of the selected fields in 2lis_13_vditm infosource.
Following error is displayed when tried to preview in the infopackage:
Error 8 when compiling the upload program: row
227, message: Data type /BIC/CCAB2LIS_13_VDITM was
found in a ne
Any suggestions?
Best Regards,Hello,
Thanks all.
This seems to be a bug as pointed out in the thread. i faced the same problem and was solved in the same way too!!!
Have assigned the points and thanks a lot.
regards, -
7.0 MD Process Chain fails - individual InfoPackages run fine manually
We have a 7.0 process chain that is supposed to load 3.x development into a standard InfoObject.
While executing the process chain, the loading of the InfoPackage errors out on the maximum erroneous records.
Too many error records - update terminated
Error 4 in the update
The erroneous records in the PSA hold all the same error description:
Data record 47 ('xxx'): Version 'xxx ' is not valid RSDMD 194
However, when the InfoPackage runs manually, all records are properly loaded in the PSA.
1. what is causing this?
2. how to resolve?Hi,
Can you please check the notes mentioned in this link.
http://forums.sdn.sap.com/thread.jspa?threadID=1058410
Regards,
Siva
Maybe you are looking for
-
Software not compatable with os 10.9.1 and windows 8.1
I bought an Officejet 8100 today and I can not get the drivers to install on any of my computers. My Macs are running OS 10.9.1 and the PC is running Windows 8.1. On the install on the Macs it says (paraphrased) my os is too recent. Any help?
-
Unable to connect and other mysteries
I am running 10.5.6 on MacbookPro - I am having the following problems * Safari - "Safari could not open the page "http://livepage.apple.com/" because the server is not responding." - Firefox is working fine * Mail - Connection status - "Mail was abl
-
completely, doesnt work, first the screen stopped working and now you cant turn it off and it makes a buzzing noise when the headphones are attached, i've tried resetting to no avail and i cant enter rescue mode as the screen doesnt work, is it gone
-
I cant resize, minimize/maximize because the top bar of the browser has disappeared and the browser window now occupies my entire screen, I can no longer tab back and forth using the ubuntu menu bar at the bottom of the screen. I have to pull down fr
-
Help. Please respond!!!
How do you put album art on if i didnt buy the song from itunes? i tried the drag and drop thing but it only shows up on my ipod for about ten of them. Please help.