InfoPackage fails while loading to 0PM_C05

Hi,
While loading the InfoPackage under datasource 0PM_PRM_PLCS_1, it fails to retrieve data with the below message:
"_Extraction of Cube 0PM_C05 requires customizing of table T_PMC05_"
The data flows from Datasource to DSO 0PM_DS07 and then to InfoCube 0PM_C05. But the data load is failing at initial level only.
Has anybody encountered this error and managed to resolve this ? Please reply and <removed_by_moderator>
Regards,
Amogh
Edited by: Amogh on Oct 28, 2010 9:56 AM
Edited by: Pravender on Nov 1, 2010 12:16 PM

Hi Amogh,
I guess your data flow is like 0PM_PRM_PLCS_1(DS) --> 0PM_DS07(DSO) -->  0PM_C05(Cube)
1)First check the Data flow.
2)Goto RAS3(Extraction checker) in R/3 system and check whther you are able to see the records
3)If you are able to see the records in RSA3, then Check the Datasource , replicate it again and then activate it.
4)Now execute the Info package and check.
5)If you are not able to see the records in RSA3/ if you are gettign any short dumps while executing, then try to debug it.

Similar Messages

  • Data load failed while loading data from one DSO to another DSO..

    Hi,
    On SID generation data load failed while loading data  from Source DSO to Target DSO.
    Following are the error which is occuuring--
    Value "External Ref # 2421-0625511EXP  " (HEX 450078007400650072006E0061006C0020005200650066
    Error when assigning SID: Action VAL_SID_CONVERT, InfoObject 0BBP
    So, i'm  not getting  WHY in one DSO i.e Source  it got successful but in another DSO i.e. Target its got failed??
    While analyzing all i check that SIDs Generation upon Activation is ckecked in source DSO but not in Target DSO..so it is reason its got failed??
    Please explain..
    Thanks,
    Sneha

    Hi,
    I hope your data flow has been designed in such a way where the 1st DSO as a staging Device and all transformation rules and routine are maintained in between 1st to 2nd dso and sid generation upon activation maintained in 2nd DSO.  By doing so you will be getting your data 1st DSO same as your source system data since you are not doing any transformation rules and routine etc.. which helps to avoid data load failure.  
    Please analyze the following
    Have you loaded masterdata before transaction data ... if no please do it first
    go to the property of first dso and check whether there maintained sid generation up on activation (it may not be maintained I guess)
    Goto the property of 2nd Dso and check whether there maintained sid generation up on activation (It may be maintained I hope)
    this may be the reason.
    Also check whether there is any special char involvement in your transaction data (even lower case letter)
    Regards
    BVR

  • ORA-22288:file or LOB operation FILEOPEN failed while loading XML file.

    Hello all,
    I am getting the following error messages while loading XML file to Oracle 9i table.
    declare
    ERROR at line 1:
    ORA-22288: file or LOB operation FILEOPEN failed
    No such file or directory
    ORA-06512: at "SYS.DBMS_LOB", line 504
    ORA-06512: at line 10
    The script I am using is all follows:-
    1. Created a file ldxmldata.sh on unix server directory
    dd conv=ucase if=$1|sed 's/<?XML/<?xml/'|sed 's/VERSION/version/'|sed 's
    /RECORD/ROW/'|sed 's/DATE/TRANSDATE/'|sed 's/&/-/'|sed 's/\/DATE>// TRANSDATE>/'>$1.UCASE
    sqlplus sales/sales@rac @upld.sql $1.UCASE
    2. Created SQL file upld.sql on unix server
    set serveroutput on
    exec DBMS_JAVA.SET_OUTPUT(1000000);
    @ldxml.sql bsl.xml.UCASE
    commit;
    exit
    3. Created sql file ldxml.sql on unix server
    declare
    insCtx DBMS_XMLSave.ctxType;
    rows number;
    file bfile := bfilename('XML_DIR','&1');
    charContent CLOB := ' ';
    targetFile bfile;
    warning number;
    begin
    targetFile := file;
    DBMS_LOB.fileopen(targetFile, DBMS_LOB.file_readonly);
    DBMS_LOB.loadfromFile(charContent,targetFile,DBMS_LOB.getLength(tar
    getFile),1,1);
    insCtx := DBMS_XMLSave.newContext('sales.s_price');
    rows := DBMS_XMLSave.insertXML(insCtx,charContent);
    DBMS_XMLSave.closeContext(insCtx);
    DBMS_LOB.fileclose(targetFile);
    end;
    4. As Sys,
    Created a directory XML_DIR and assigned it the path of Unix server directory
    where the script files reside.
    Granted read priviledge on XML_DIR to user sales.
    I am getting the above error messages. Kindly help with some possible solution.
    Arun Patodia
    Bokaro Steel City

    Hi guys,
    Sybrand, aplogoies, the second line of the error stack was on one line in the first post, full error stack below:
    ORA-22288: file or LOB operation FILEOPEN failed
    The program issued a command but the command length is incorrect.
    ORA-06512: at "SYS.DBMS_LOB", line 716
    ORA-06512: at "JLMS.LOAD_DATA_UTIL", line 417
    ORA-06512: at line 2I have looked at that error code as you mentioned, but the second line here doesn't really help much.
    Hoek, i took your advice and tried to replace FILEOPEN with OPEn but got the same error.
    Just to clarify as well, I am not using UNC or relative file paths as I know that these can cause problems.
    Rgds
    Dan

  • Weblogic Start script fails while Loading trusted certificates from jks

    Hi,
    I have a Weblogic Portal 10.3.2 installation on a Solaris Unix box. There is one Admin server and two Managed servers. I am trying to deploy an EJB based application on one of the Managed servers. Note that this application has been working fine in the Weblogic 9.2 environment.
    When the Managed Server is started, I get the below messages in the Weblogic console log. We have an internal SSO authentication system, which is integrated with this application. When this integration is removed, we are able to login to the application without any issues. When it is turned on, the redirection from SSO to the application fails - most likely because of the below SSL related errors.
    I have accessed the below link and accordingly set the property -Dweblogic.ssl.JSSEEnabled=true. But it didn't help.
    http://justasg.blogspot.com/2012/04/tlsssl-certificate-errors-and-warnings.html
    Please let me know if you have any suggestions.
    <Jun 4, 2012 4:51:59 PM MEST> <Notice> <Security> <BEA-090169> <Loading trusted certificates from the jks keystore file /data/applications/norkom/BEA103/wlserver_10.3/server/lib/DemoTrust.jks.>
    <Jun 4, 2012 4:51:59 PM MEST> <Notice> <Security> <BEA-090169> <Loading trusted certificates from the jks keystore file /opt/jdk1.6.0_32/jre/lib/security/cacerts.>
    <Jun 4, 2012 4:51:59 PM MEST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=Entrust Root Certification Authority - G2,OU=(c) 2009 Entrust\, Inc. - for authorized use only,OU=See www.entrust.net/legal-terms,O=Entrust\, Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
    <Jun 4, 2012 4:51:59 PM MEST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=thawte Primary Root CA - G3,OU=(c) 2008 thawte\, Inc. - For authorized use only,OU=Certification Services Division,O=thawte\, Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
    <Jun 4, 2012 4:51:59 PM MEST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=T-TeleSec GlobalRoot Class 3,OU=T-Systems Trust Center,O=T-Systems Enterprise Services GmbH,C=DE". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
    <Jun 4, 2012 4:51:59 PM MEST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=T-TeleSec GlobalRoot Class 2,OU=T-Systems Trust Center,O=T-Systems Enterprise Services GmbH,C=DE". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
    <Jun 4, 2012 4:51:59 PM MEST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=GlobalSign,O=GlobalSign,OU=GlobalSign Root CA - R3". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
    <Jun 4, 2012 4:51:59 PM MEST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "OU=Security Communication RootCA2,O=SECOM Trust Systems CO.\,LTD.,C=JP". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
    <Jun 4, 2012 4:51:59 PM MEST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=VeriSign Universal Root Certification Authority,OU=(c) 2008 VeriSign\, Inc. - For authorized use only,OU=VeriSign Trust Network,O=VeriSign\, Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
    <Jun 4, 2012 4:51:59 PM MEST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=KEYNECTIS ROOT CA,OU=ROOT,O=KEYNECTIS,C=FR". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
    <Jun 4, 2012 4:51:59 PM MEST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=GeoTrust Primary Certification Authority - G3,OU=(c) 2008 GeoTrust Inc. - For authorized use only,O=GeoTrust Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
    <Jun 4, 2012 4:51:59 PM MEST> <Error> <Server> <BEA-002606> <Unable to create a server socket for listening on channel "DefaultSecure[1]". The address 127.0.0.1 might be incorrect or another process is using port 7022: java.net.BindException: Address already in use.>
    <Jun 4, 2012 4:51:59 PM MEST> <Error> <Server> <BEA-002606> <Unable to create a server socket for listening on channel "DefaultSecure". The address 10.228.12.24 might be incorrect or another process is using port 7022: java.net.BindException: Address already in use.>
    <Jun 4, 2012 4:51:59 PM MEST> <Notice> <Server> <BEA-002613> <Channel "Default" is now listening on 10.228.12.24:7020 for protocols iiop, t3, ldap, snmp, http.>
    <Jun 4, 2012 4:51:59 PM MEST> <Notice> <Server> <BEA-002613> <Channel "Default[1]" is now listening on 127.0.0.1:7020 for protocols iiop, t3, ldap, snmp, http.>
    <Jun 4, 2012 4:51:59 PM MEST> <Notice> <WebLogicServer> <BEA-000332> <Started WebLogic Managed Server "NCA_Server" for domain "norkom" running in Development Mode>
    <Jun 4, 2012 4:52:01 PM MEST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RUNNING>
    <Jun 4, 2012 4:52:01 PM MEST> <Notice> <WebLogicServer> <BEA-000360> <Server started in RUNNING mode>
    <WSEE:27>Warning: JMS queue 'weblogic.wsee.DefaultQueue' is not found, as a result, Web Service async responses via jms transport is not supported. If the target service uses JMS transport, the responses will not be able to come back.<JmsQueueListener.connect:287>
    <WSEE:27>Warning: JMS queue 'weblogic.wsee.DefaultQueue' is not found, as a result, Web Service async responses via jms transport is not supported. If the target service uses JMS transport, the responses will not be able to come back.<JmsQueueListener.connect:287>
    <WSEE:27>Warning: JMS queue 'weblogic.wsee.DefaultQueue' is not found, as a result, Web Service async responses via jms transport is not supported. If the target service uses JMS transport, the responses will not be able to come back.<JmsQueueListener.connect:287>
    <WSEE:27>Warning: JMS queue 'weblogic.wsee.DefaultQueue' is not found, as a result, Web Service async responses via jms transport is not supported. If the target service uses JMS transport, the responses will not be able to come back.<JmsQueueListener.connect:287>
    <WSEE:27>Warning: JMS queue 'weblogic.wsee.DefaultQueue' is not found, as a result, Web Service async responses via jms transport is not supported. If the target service uses JMS transport, the responses will not be able to come back.<JmsQueueListener.connect:287>
    <WSEE:27>Warning: JMS queue 'weblogic.wsee.DefaultQueue' is not found, as a result, Web Service async responses via jms transport is not supported. If the target service uses JMS transport, the responses will not be able to come back.<JmsQueueListener.connect:287>
    Note: We have another Solaris Unix box, with the same installation of Weblogic with the same SSO redirection, but another EJB application is deployed. Also, there is no Managed and the application is deployed on the Admin server itself. But when the server is started, I don't see any attempts to load any certificates and also there are no issues.
    So either please suggest how this certificate loading can be rectified or suggest a way to disable the certificate loading (if at all its an option).
    Please let me know if you need any further details.

    Firstly,
    938767 wrote:
    <Jun 4, 2012 4:51:59 PM MEST> <Notice> <Security> <BEA-090169> <Loading trusted certificates from the jks keystore file /opt/jdk1.6.0_32/jre/lib/security/cacerts.>
    <Jun 4, 2012 4:51:59 PM MEST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=Entrust Root Certification Authority - G2,OU=(c) 2009 Entrust\, Inc. - for authorized use only,OU=See www.entrust.net/legal-terms,O=Entrust\, Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>I don't think that this will be your problem... Unless you are actually using some of those certificates you can ignore those messages.
    But the following looks suspicious, I guess 7022 is your SSL port...
    <Jun 4, 2012 4:51:59 PM MEST> <Error> <Server> <BEA-002606> <Unable to create a server socket for listening on channel "DefaultSecure[1]". The address 127.0.0.1 might be incorrect or another process is using port 7022: java.net.BindException: Address already in use.>
    <Jun 4, 2012 4:51:59 PM MEST> <Error> <Server> <BEA-002606> <Unable to create a server socket for listening on channel "DefaultSecure". The address 10.228.12.24 might be incorrect or another process is using port 7022: java.net.BindException: Address already in use.>Hope that helps.
    Cheers,
    Vlad
    Give points - it is good etiquette to reward an answerer points (5 - helpful; 10 - correct) for their post if they answer your question. If you think this answer is helpful, please consider giving points.

  • [SOLVED] Arch Linux Boot from USB fails while loading kernel

    I am attempting to get arch linux booting off my usb. I use cfdisk to create a /dev/sdb1 partition then use mkfs.ext4 /dev/sdb1, mount the usb, pacstrap it, use install-syslinux_update -iam, generate fstab and then attempt to boot from it.
    The boot extracts the kernel but then complains that DEVICE is missing in the option APPEND root=DEVICE (in syslinux.cfg). I looked in /dev/disk (on the temporary filesystem shell), it showed my ssd and cd drive but not the usb. Does anyone know what could be causing the USB to not load in that particular section of the kernel?
    Last edited by afree10 (2013-12-11 14:28:14)

    afree10 wrote:
    Due to my situation I have to type the file in from scratch so I will only type uncommented lines:
    MODULES=""
    BINARIES=""
    FILES=""
    HOOKS="base udev autodetect modconf block filesystems keyboard fsck"
    I will reboot and get that lsmod output.
    Since you'll probably want to boot from different computers (portable USB system), you want to remove 'autodetect' from that line. This is the same as always booting the initramfs-linux-fallback.img image. To save some space, you could remove 'autodetect' from the configuration file, disable the fallback image in /etc/mkinitcpio.d/linux.preset  and delete initramfs-linux.img (otherwise, you'll get two identical images).
    Of course, run mkinitcpio -P when you're done.

  • Failure while loading into cube

    I am doing loading into Headcount cube on daily basis through a process chain from two different datasources. 
    The system is 3.5
    But it fails while loading and it ends up with dump in ST22 with the exception ADD_PARTITION_FAILED.
    Can anybody help regarding what needs to be done to overcome this issue?
    Thanks.

    Hi,
    This thread solves ur problem
    error while loading data into cube
    Tarak

  • While loading master data to infoobject Load failed due to Duplicate record

    Hi Experts,
    While loading master data to the infoobject load failed .
    The error it is showing is 24 Duplicate record found. 23 recordings used in table.
    Pls help me to solve this issue
    Thanks in Advance.
    Regards,
    Gopal.

    In infopackage settings u will find a checkbox for 'delete duplicate records'.
    I think it appears beside the radio button for 'To PSA',and also tick checkbox for 'subsequent update to data targets'.
    This will remove the duplicate records(if any) from the PSA before they are processed further by transfer and update rules.
    Use this and reload master data.
    cheers,
    Vishvesh

  • Error While loading into BW using infoPackage

    Hi All,
    While following directions posted at the following wiki page https://wiki.sdn.sap.com/wiki/display/BOBJ/ConfiguretheLoadJobinBW%28DS+3.2%29,
    we get an error while loading data into BW using infoPackage via Data services 3.2
    In SAP BI side Error says :"Error while executing the following command:  -sJO return code:220"
    On DS side for the RFC server log we get the error" Error while executing the following command -sJOB_SQL_TO_DBI -Ubbu -P;(encrypted password) -A (encryted information) -VMODE=F"
    Issue is still open with support as we still cannot excute the job from infopackage. it is succesfully executed from designer, admin console, batch file.
    Any insights/help would be appreciated.
    Thanks.
    Edited by: rana_accn on Jan 26, 2010 6:48 PM

    Sure I will.
    One thing we have noticed is that in the server_eventlog parameter for the  log line "Starting job with command line parameters are different"
    When job is executed from DS side parameters -Ct -Cm -Ca -Cj -Cp -S -N -Q -U -P -G -r -T -Locale are used
    When job is executed from BW side parameters -Ct -Cm -Ca -Cj -Cp -s -N -Q are used
    Also when the job is executed from BW,  log files start getting created but then trace and error file show an error that cannot open database - and that points to DSCentral repository.This repository is not even mapped to the job server and the job has been exported from the correct repository as command line execution of the job works perfectly fine.
    Thnx
    Just an update we were not able to figure out why this happened in the existing environment. One reason given was that somehow the commands which were being executed from BW side were getting corrupted. We had to build a new environment and this is no longer an issue in the new environment, as now all jobs can be executed from BW. Only difference between the 2 environments was we are now on 12.2.1.3 while earlier we were on 12.2.0.0.
    Edited by: rana_accn on Mar 23, 2010 10:21 PM
    Edited by: rana_accn on Apr 29, 2010 9:46 PM

  • While loading ITunes Igot this messege, Service "Apple Mobile Device" failed to start. Verify that you have sufficient privileges to start system services. My question is, How do I verify if I have sufficient privileges?

    While loading ITunes I got this messege, Service "Apple Mobile Device" failed to start. Verify that you have sufficient privileges to start system services. My question is, How do I verify if I have sufficient privileges?

    Hello hurleygirl63,
    Thank you for the details of the issue you are experiencing with iTunes.  I recommend following the steps in the article below:
    How to restart the Apple Mobile Device Service (AMDS) on Windows
    http://support.apple.com/kb/TS1567
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • DBD: Error while trying to load the transport provider for odbc. Failed to load the library. System error: The specified module could not be found.

    Hello Everyone,
    We are getting an error while trying to create an Universe via Microsoft -> MS Analysis Services 2014 -> OLEDB for OLAP Provider under Connection in UDT -"DBD: Error while trying to load the transport provider for odbc. Failed to load the library. System error: The specified module could not be found."  We have installed BI 4.1 SP05 in our system. As per earlier posts in scn in BO XI 3.x this issue used to be for improper installation of Integration KIT but in our scenarion Integration KIT is within the BO 4.1 package so no seperate installation is required. Moreover I have checked whether all the driver is present under file: "C:\Program Files (x86)\SAP BusinessObjects\SAP BusinessObjects Enterprise XI 4.0\dataAccess\connectionServer\drivers" and seems everything is fine. But still I am getting this error. One important point is we could use IDT because in IDT still we don't have option to connect with 'Microsoft Analysis Services - 2014 (XMLA)' as we are using Microsoft Analysis Services 2014 version.
    Kindly help if anyone has faced the same problem with SAP BO 4.1.
    Thanks and Best Regards,
    Ghosal

    Hello Everybody,
    The problem is solved now after installing "OLEDB drivers from SQL Server 2012 Feature Pack". We had OLEDB drivers that comes directly from SQL Server but that did not worked out in our case.
    Thanks for your support.
    Best Regards,
    Ghosal

  • Exception occured while retrieving the Flowtrace XML for the Composite Instance; java.lang.ClassNotFoundException: Failed to load class oracle.bpel.services.workflow.WorkflowException

    When i try to view the FlowTrace i'm getting the following exception in EM
    Unable to display Flowtrace due to exception while initializing object, please review logs for detailed information.
    >> Exception occured while retrieving the Flowtrace XML for the Composite Instance; ECID: 0000JzmIFk95EgPquci8UH1HtzlR0000HC
    >> java.rmi.UnmarshalException: Problem finding error class; nested exception is:
    >>> java.lang.ClassNotFoundException: Failed to load class oracle.bpel.services.workflow.WorkflowException
    >>> at weblogic.rjvm.ResponseImpl.unmarshalReturn(ResponseImpl.java:237)
    >>> at weblogic.rmi.internal.BasicRemoteRef.invoke(BasicRemoteRef.java:223)
    >>> at oracle.soa.management.internal.ejb.impl.FacadeFinderBean_4vacyo_FacadeFinderBeanImpl_1036_WLStub.getAuditTrail(Unknown Source)
    >>> at oracle.soa.management.internal.ejb.EJBLocatorImpl.getAuditTrail(EJBLocatorImpl.java:473)
    >>> at oracle.sysman.emai.model.sca.share.composite.FlowTraceModel.setFloatraceModelInfo(FlowTraceModel.java:172)
    >>> at oracle.sysman.emai.model.sca.share.composite.FlowTraceModel.initialize(FlowTraceModel.java:79)
    >>> at oracle.sysman.emai.model.sca.EMEntityModel._initializeEntityData(EMEntityModel.java:28)
    >>> at oracle.sysman.emai.model.sca.common.SCAEntityObject.initializeSCAData(SCAEntityObject.java:124)
    >>> at oracle.sysman.emai.model.sca.SCAObject.initializeData(SCAObject.java:66)
    >>> at oracle.sysman.core.model.util.ModelUtil$EMObjectResetter.initOrResetEMObject(ModelUtil.java:319)
    >>> at oracle.sysman.core.model.util.ModelUtil$EMObjectResetter.access$000(ModelUtil.java:280)
    >>> at oracle.sysman.core.model.util.ModelUtil.initializeMBEMObjects(ModelUtil.java:231)
    >>> at oracle.sysman.core.model.util.ModelUtil.initializeAllEMObjects(ModelUtil.java:128)
    >>> at oracle.sysman.core.model.util.ModelUtil.initializeAllEMObjects(ModelUtil.java:101)
    >>> at oracle.sysman.emSDK.adfext.ctlr.EMPagePhaseListener.doPrePrepareModel(EMPagePhaseListener.java:867)
    >>> at oracle.sysman.emSDK.adfext.ctlr.EMPagePhaseListener.beforePhase(EMPagePhaseListener.java:795)
    >>> at oracle.adfinternal.controller.lifecycle.ADFLifecycleImpl$PagePhaseListenerWrapper.beforePhase(ADFLifecycleImpl.java:551)
    >>> at oracle.adfinternal.controller.lifecycle.LifecycleImpl.internalDispatchBeforeEvent(LifecycleImpl.java:100)
    >>> at oracle.adfinternal.controller.lifecycle.LifecycleImpl.executePhase(LifecycleImpl.java:191)
    >>> at oracle.adfinternal.controller.faces.lifecycle.ADFPhaseListener.access$400(ADFPhaseListener.java:23)
    >>> at oracle.adfinternal.controller.faces.lifecycle.ADFPhaseListener$PhaseInvokerImpl.startPageLifecycle(ADFPhaseListener.java:238)
    >>> at oracle.adfinternal.controller.faces.lifecycle.ADFPhaseListener$1.after(ADFPhaseListener.java:274)
    >>> at oracle.adfinternal.controller.faces.lifecycle.ADFPhaseListener.afterPhase(ADFPhaseListener.java:75)
    >>> at oracle.adfinternal.controller.faces.lifecycle.ADFLifecyclePhaseListener.afterPhase(ADFLifecyclePhaseListener.java:53)
    >>> at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:472)
    >>> at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:194)
    >>> at javax.faces.webapp.FacesServlet.service(FacesServlet.java:265)
    >>> at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
    >>> at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
    >>> at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:301)
    >>> at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
    >>> at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
    >>> at oracle.sysman.emSDK.license.LicenseFilter.doFilter(LicenseFilter.java:164)
    >>> at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
    >>> at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:205)
    >>> at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
    >>> at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:106)
    >>> at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:446)
    >>> at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60)
    >>> at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:446)
    >>> at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:271)
    >>> at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:177)
    >>> at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)
    >>> at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
    >>> at oracle.help.web.rich.OHWFilter.doFilter(Unknown Source)
    >>> at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
    >>> at oracle.sysman.emas.fwk.MASConnectionFilter.doFilter(MASConnectionFilter.java:41)
    >>> at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
    >>> at oracle.adf.library.webapp.LibraryFilter.doFilter(LibraryFilter.java:179)
    >>> at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
    >>> at oracle.sysman.eml.app.AuditServletFilter.doFilter(AuditServletFilter.java:179)
    >>> at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
    >>> at oracle.sysman.eml.app.EMRepLoginFilter.doFilter(EMRepLoginFilter.java:203)
    >>> at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
    >>> at oracle.sysman.core.model.targetauth.EMLangPrefFilter.doFilter(EMLangPrefFilter.java:158)
    >>> at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
    >>> at oracle.sysman.core.app.perf.PerfFilter.doFilter(PerfFilter.java:141)
    >>> at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
    >>> at oracle.sysman.eml.app.ContextInitFilter.doFilter(ContextInitFilter.java:542)
    >>> at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
    >>> at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119)
    >>> at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:315)
    >>> at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:442)
    >>> at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)
    >>> at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)
    >>> at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
    >>> at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
    >>> at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:139)
    >>> at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
    >>> at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
    >>> at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
    >>> at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3730)
    >>> at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3696)
    >>> at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
    >>> at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
    >>> at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2273)
    >>> at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2179)
    >>> at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1490)
    >>> at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
    >>> at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
    >>> Caused by: java.lang.ClassNotFoundException: Failed to load class oracle.bpel.services.workflow.WorkflowException
    >>> at weblogic.rmi.utils.WLRMIClassLoaderDelegate.loadClass(WLRMIClassLoaderDelegate.java:208)
    >>> at weblogic.rmi.utils.WLRMIClassLoaderDelegate.loadClass(WLRMIClassLoaderDelegate.java:135)
    >>> at weblogic.rmi.utils.Utilities.loadClass(Utilities.java:305)
    >>> at weblogic.rjvm.MsgAbbrevInputStream.resolveClass(MsgAbbrevInputStream.java:436)
    >>> at weblogic.utils.io.ChunkedObjectInputStream$NestedObjectInputStream.resolveClass(ChunkedObjectInputStream.java:268)
    >>> at java.io.ObjectInputStream.readOrdinaryObject(ObjectInputStream.java:1731)
    >>> at java.io.ObjectInputStream.readSerialData(ObjectInputStream.java:1870)
    >>> at java.io.ObjectInputStream.readOrdinaryObject(ObjectInputStream.java:1752)
    >>> at java.io.ObjectInputStream.readSerialData(ObjectInputStream.java:1870)
    >>> at java.io.ObjectInputStream.readObject(ObjectInputStream.java:350)
    >>> at weblogic.utils.io.ChunkedObjectInputStream.readObject(ChunkedObjectInputStream.java:208)
    >>> at weblogic.rjvm.MsgAbbrevInputStream.readObject(MsgAbbrevInputStream.java:599)
    >>> at weblogic.rjvm.ResponseImpl.unmarshalReturn(ResponseImpl.java:235)
    >>> at weblogic.rmi.internal.BasicRemoteRef.invoke(BasicRemoteRef.java:223)
    >>> at oracle.soa.management.internal.ejb.impl.FacadeFinderBean_4vacyo_FacadeFinderBeanImpl_1036_WLStub.getAuditTrail(Unknown Source)
    >>> at oracle.soa.management.internal.ejb.EJBLocatorImpl.getAuditTrail(EJBLocatorImpl.java:473)
    >>> at oracle.sysman.emai.model.sca.share.composite.FlowTraceModel.setFloatraceModelInfo(FlowTraceModel.java:172)
    >>> at oracle.sysman.emai.model.sca.share.composite.FlowTraceModel.initialize(FlowTraceModel.java:80)
    >>> at oracle.sysman.emai.model.sca.EMEntityModel._initializeEntityData(EMEntityModel.java:29)
    >>> at oracle.sysman.emai.model.sca.common.SCAEntityObject.initializeSCAData(SCAEntityObject.java:125)
    >>> at oracle.sysman.emai.model.sca.SCAObject.initializeData(SCAObject.java:66)
    >>> at oracle.sysman.core.model.util.ModelUtil$EMObjectResetter.initOrResetEMObject(ModelUtil.java:319)
    >>> at oracle.sysman.core.model.util.ModelUtil$EMObjectResetter.access$000(ModelUtil.java:280)
    >>> at oracle.sysman.core.model.util.ModelUtil.initializeMBEMObjects(ModelUtil.java:231)
    >>> at oracle.sysman.core.model.util.ModelUtil.initializeAllEMObjects(ModelUtil.java:131)
    >>> at oracle.sysman.core.model.util.ModelUtil.initializeAllEMObjects(ModelUtil.java:102)
    >>> at oracle.sysman.emSDK.adfext.ctlr.EMPagePhaseListener.doPrePrepareModel(EMPagePhaseListener.java:869)
    >>> at oracle.sysman.emSDK.adfext.ctlr.EMPagePhaseListener.beforePhase(EMPagePhaseListener.java:795)
    >>> at oracle.adfinternal.controller.lifecycle.ADFLifecycleImpl$PagePhaseListenerWrapper.beforePhase(ADFLifecycleImpl.java:552)
    >>> at oracle.adfinternal.controller.lifecycle.LifecycleImpl.internalDispatchBeforeEvent(LifecycleImpl.java:100)
    >>> at oracle.adfinternal.controller.lifecycle.LifecycleImpl.executePhase(LifecycleImpl.java:192)
    >>> at oracle.adfinternal.controller.faces.lifecycle.ADFPhaseListener.access$400(ADFPhaseListener.java:23)
    >>> at oracle.adfinternal.controller.faces.lifecycle.ADFPhaseListener$PhaseInvokerImpl.startPageLifecycle(ADFPhaseListener.java:238)
    >>> at oracle.adfinternal.controller.faces.lifecycle.ADFPhaseListener$1.after(ADFPhaseListener.java:276)
    >>> at oracle.adfinternal.controller.faces.lifecycle.ADFPhaseListener.afterPhase(ADFPhaseListener.java:77)
    >>> at oracle.adfinternal.controller.faces.lifecycle.ADFLifecyclePhaseListener.afterPhase(ADFLifecyclePhaseListener.java:54)
    >>> at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:472)
    >>> at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:194)
    >>> at javax.faces.webapp.FacesServlet.service(FacesServlet.java:265)
    >>> at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
    >>> at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
    >>> at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:301)
    >>> at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:27)
    >>> at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
    >>> at oracle.sysman.emSDK.license.LicenseFilter.doFilter(LicenseFilter.java:166)
    >>> at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
    >>> at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:205)
    >>> at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
    >>> at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:106)
    >>> at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:447)
    >>> at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60)
    >>> at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:447)
    >>> at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:271)
    >>> at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:177)
    >>> at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)
    >>> at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
    >>> at oracle.help.web.rich.OHWFilter.doFilter(Unknown Source)
    >>> at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
    >>> at oracle.sysman.emas.fwk.MASConnectionFilter.doFilter(MASConnectionFilter.java:41)
    >>> at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
    >>> at oracle.adf.library.webapp.LibraryFilter.doFilter(LibraryFilter.java:180)
    >>> at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
    >>> at oracle.sysman.eml.app.AuditServletFilter.doFilter(AuditServletFilter.java:183)
    >>> at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
    >>> at oracle.sysman.eml.app.EMRepLoginFilter.doFilter(EMRepLoginFilter.java:203)
    >>> at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
    >>> at oracle.sysman.core.model.targetauth.EMLangPrefFilter.doFilter(EMLangPrefFilter.java:158)
    >>> at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
    >>> at oracle.sysman.core.app.perf.PerfFilter.doFilter(PerfFilter.java:141)
    >>> at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
    >>> at oracle.sysman.eml.app.ContextInitFilter.doFilter(ContextInitFilter.java:542)
    >>> at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
    >>> at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119)
    >>> at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:315)
    >>> at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:442)
    >>> at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)
    >>> at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)
    >>> at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
    >>> at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
    >>> at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:139)
    >>> at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
    >>> at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
    >>> at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
    >>> ... 9 more

    Hi Manish,
    It seems that you are using a custom security provider and the weblogic server is not able to find the class / jar file that contains the class.
    java.lang.ClassNotFoundException: Failed to load class com.msl.security.providers.SessionPrincipal]
    Make sure you have all the required jar files in the server classpath.
    You can use the JarScan utility to find the jar that contains the class.
    Refer the below link regarding the jarScan.
    http://weblogic-wonders.com/weblogic/2011/01/26/finding-jar-files-using-jarscan/
    Regards,
    Anandraj
    http://weblogic-wonders.com

  • Install RAC failed with root.sh error while loading shared libraries: libst

    Hi ,
    I install rac under vmware workstation using this atricle .
    http://www.oracle-base.com/articles/10g/OracleDB10gR2RACInstallationOnCentos4UsingVMware.php
    everything work smoothly but I faced error with root.sh
    Failed to upgrade Oracle Cluster Registry configuration
    I found metlalink talk about missing compat-libstdc++-33-3.2.3-47.3.ia64.rpm and must be installed according to
    that .
    The probelm rasied when run
    /u01/app/oracle/product/10.2.0/crs/bin/crsctl.bin: error while loading shared libraries: libstdc++.so.5: cannot
    open shared object file: No such file or directory
    Failure initializing entries in /etc/oracle/scls_scr/rac2.
    Linux version is RHE4
    [oracle@rac1 bin]$ uname -a
    Linux rac1.localdomain 2.6.9-55.ELsmp #1 SMP Fri Apr 20 17:03:35 EDT 2007 i686 i686 i386 GNU/Linux
    when install this package it does not work
    [root@rac1 RPMS]# rpm -Uvh compat-libstdc++-33-3.2.3-47.3.ia64.rpm
    warning: compat-libstdc++-33-3.2.3-47.3.ia64.rpm: V3 DSA signature: NOKEY, key ID b38a8516error: Failed
    dependencies:
    libc.so.6.1()(64bit) is needed by compat-libstdc++-33-3.2.3-47.3.ia64 libc.so.6.1(GLIBC_2.2)(64bit)
    is needed by compat-libstdc++-33-3.2.3-47.3.ia64 libc.so.6.1(GLIBC_2.3)(64bit) is needed by compat-
    libstdc++-33-3.2.3-47.3.ia64 libgcc_s.so.1()(64bit) is needed by compat-libstdc++-33-3.2.3-47.3.ia64
    libgcc_s.so.1(GCC_3.0)(64bit) is needed by compat-libstdc++-33-3.2.3-47.3.ia64 libgcc_s.so.1(GCC_3.3)(64bit)
    is needed by compat-libstdc++-33-3.2.3-47.3.ia64 libgcc_s.so.1(GLIBC_2.0)(64bit) is needed by compat-
    libstdc++-33-3.2.3-47.3.ia64 libm.so.6.1()(64bit) is needed by compat-libstdc++-33-3.2.3-47.3.ia64
    compat-libstdc++ = 7.3-2.96.128 is needed by (installed) compat-libstdc++-devel-7.3-2.96.128.i386 compat-
    libstdc++ = 7.3 is needed by (installed) compat-gcc-c++-7.3-2.96.128.i386[root@rac1 RPMS]#
    My probelm cannot install this packages ? What shoudl I do .

    user12010537 wrote:
    Hi ,
    I found metlalink talk about missing compat-libstdc++-33-3.2.3-47.3.ia64.rpm and must be installed according to
    Linux version is RHE4
    [root@rac1 RPMS]# rpm -Uvh compat-libstdc++-33-3.2.3-47.3.ia64.rpm
    warning: compat-libstdc++-33-3.2.3-47.3.ia64.rpm: V3 DSA signature: NOKEY, key ID b38a8516error: Failed
    dependencies:
    libc.so.6.1()(64bit) is needed by compat-libstdc++-33-3.2.3-47.3.ia64
    My probelm cannot install this packages ? What shoudl I do .
    Hi,
    You need to install the dependency package first like glibc, etc
    also see the output from runcluvfy, it should show which packages need to installed
    Cheers

  • AME CS6 Fails while while loading

    My PC crashed (blue screen) while  encoder was exporting a vid.
    After restarting pc, encoder now fails to load at the splash screen. When it's loading the plugins etc it freezes when it gets to thelastproject I worked on.
    What I've tried:
    Deleting the "Watch Folder Info" file in "C:\Users\AppData\Roaming\Adobe\Adobe Media Encoder\6.0"
    Deleting the whole 6.0 folder in "C:\Users\AppData\Roaming\Adobe\Adobe Media Encoder\6.0"
    Deleting all temp files  relating to the project in "C:\Users\AppData\Local\Temp"
    System:
    Win 7 Ultimate x64
    16GB Ram
    nVidia 560 Ti
    Intel  i7 2600 CPU

    Great report and an admirable effort at troubleshooting the issue.
    Try deleting (or renaming*) three more folders from C:\Users\AppData\Roaming\Adobe\:
    \Common : this contains an AME folder as well as the media cache, which could have a corrupt file from the BSOD
    \dynamiclinkmanager\6.0 : This is an executable that AME uses to read sequences from PPRO and comps from AE.
    \PProHeadless\6.0 : This is basically a version of PPRO that DynamicLink uses to render frames from a sequence that AME is encoding.
    *I recommend renaming these folders, which effectively hides them from AME, rather than deleting them. That way, you don't lose anything in case the step doesn't help--just delete the new folder and rename the old one to its orginal name.

  • "Failed to load excel file" an Error Message while running TDS upgrade util

    Dear All,
    "Failed to load excel file" an Error Message while running TDS upgrade utility when clicking on CHECK DATA.
    Please help me out on this!!!!!!!!!!!!
    Thanks..........

    Not all data can be exported to Excel easily. Especially if the query result is huge or there are special characters in the query results. You may try the most updated version.
    Thanks,
    Gordon

  • Fails to load modules while lauching Xfce4 (SOLVED)

    When I type "startxfce4" I get something like this:
    Failed to load module: sis (module does not exist, 0)
    Failed to load module: vga (module does not exist, 0)
    Failed to load module: vesa (module does not exist, 0)
    Failed to load module: mouse (module does not exist, 0)
    Failed to load module: [AND_SOME_MORE] (module does not exist, 0)
    Fatal server error:
    no screens found
    Fatal IO error 104 (connecting reset by peer) on X server ":0.0"
    after 0 requests ( 0 known processed) o events remaining.
    I have no idea what it means (except that I miss some modules).
    /Richard

    those are xorg modules
    As xorg7 is modular, you'll need to install the modules you need. At least you should have for keyboard and mouse to work:
    pacman -S xf86-input-mouse xf86-input-keyboard
    Then you should have one for your video card
    pacman -S xf86-video-{your video}
    You can see which ones are available from
    pacman -Ss xf86-video
    Then you need to configure xorg if you haven't done so far.
    As root type 'xorgconfig' for a nice script to help you configure it.

Maybe you are looking for