Infopackage for updating hierarchy doesn't work in process chain

All:
I have infopackages for Cost Center and they are part of a process chain. While cost center master data get populated after the process chain runs, cost center hierarchy does not get populated. Infopackage for cost center hierarchy is also part of the process chain.
However, when I manually run the same infopackage (for CC hierarchy) cost center hierarchy in BW (BW 3.5) gets populated.
Could anybody suggest what is wrong here?
Thanks,
Pranab

Hi,
Did you include "Attribute Change" process in your process chain which will activate the saved hierarchy? Otherwise the new loading hierarchy will be kept as "M" version instead of "A" version.
Joe

Similar Messages

  • Ts update progam doesn''t work.

    my ts update progam doesn''t work. it seems be be missing. The messsage I get is that the program doesn't exist after I get an alert saying the TS Update isn't working.  Where do i donwload the program? Its an HP TouchSmart 600, windows 7 64bit

    Per my previous note, the model number is HP TouchSmart 600 and I'm on Windows 7.   This is NOT an upgrade scenario.
    When I purchased and began using the machine, it went through a rountine software update check just after start up.   For some reason, now when I start up the machine, it attempts up look for softward updates and then pops up a message alerting me to the fact that the TS update is not working. When I attempt to diagnose why, the message I get is that the TS update program is not there.
    So, i think that I just need to install the auto-update program again????? Not sure.

  • My iphone keeps blocking in a "boot" mode... blackscreen with apple logo... the restarting (home and power button for 10 sec) doesn't work.

    my iphone keeps blocking in a "boot" mode... blackscreen with apple logo... the restarting (home and power button for 10 sec) doesn't work. when i get it in DFU mode and try restoring with itunes it remains the same... provider already "fixed" this problem twice with a "software update" only to get the same problem again... it just "reboots" this time it happened @ night while charging... previous time in my jacket pocket... this is the 3th time it happens, and my provider (Mobistar belgium) doesn't wish to exchange or refund my iphone witch clearly has something wrong 3 times same problem in 3 months...

    imanfromsweden wrote:
    Please apple support do you people have a convincing answer for us? Is there a solution? My phone is only 2 years old and was (2 hours ago), in top condition!!
    Please help....
    On belhalf of my fellow volunteers, the answer is, "We'll try our best." 
    My advice is to try not to treat this like it is a paid service provided by compensated professionals.  Ask nicely and one of the nice folks here might take some time out of their weekend to offer advice.

  • I downloaded a facebook update that doesn't work on my iPhone OS. Can I get the previous version back?

    I downloaded a facebook update that doesn't work on my iPhone OS. Can I get the previous version of facebook back? I have a 3G phone that doesn't upgrade to OS 4.3 which the newest facebook update needs to run. Now I can't use facebook on my iPhone at all. Is there a place to downgrade or to download the older version of the app?

    i can't understan why i can get a facebook apps for my iphone 3g that is so "sad" i'm miss facebook all because u guys Apple have a new version of the facebook and the 3g can,t upgarde i'm vext with apple right now!.....

  • My serial number for Logic Studio doesn't work. I used one from a different box and it worked. How can I get a new number?

    My serial number for Logic Studio doesn't work. I used one from a different box and it worked. How can I get a new number?

    http://support.apple.com/kb/TS2005
    http://support.apple.com/kb/HT1861
    https://ssl.apple.com/support/proapps/serialnumbers/

  • Question '''OS Win2000''' using '''FireFox 5.01 - portable''' Problem: '''Plug-in for Windows-Mediaplayer doesn't work

    '''OS Win2000'''
    using '''FireFox 5.01 - portable'''
    Problem:
    '''Plug-in for Windows-Mediaplayer doesn't work '''
    cause: presumably - Win2000 only copes with WMP 9.0
    Your FF 5.01-portable works only for WMP 12 (??)
    I have no problems with WMP when I use my regular FF 3.6 on this old Win2000. - WMP - Plug-in of FF3.6 works perfectly on my Win2000
    '''question:'''
    What can I do to get WMP running on my Win2000 using FF5.01-portable ?''''''

    See the Portable Firefox support forum for help with that. <br />
    http://portableapps.com/forums/support/firefox_portable

  • My charger for ipad air doesn't work.Can I use charger 10w without any worreies?

    My charger for ipad air doesn't work.Can I use charger 10w without any worreies(damage battery)?Is it possible to change in apple store with warranty?

    "Can I use charger 10w without any worreies(damage battery)?"
    Yes you can.
    "Is it possible to change in apple store with warranty?"
    If you mean "can I get my power adapter replaced under warranty, at the Apple store?", yes.

  • Variable hierarchy doesn't work

    Hi Friends,
    Please let me expalin my problem.
    Case 1
    Iu2019ve defined a hierarchy as variable in a query and a variable for herarchy nodes to
    restrict the  characteristic as well (characteristic displayed in rows)
    Calling the query, I can select required hierarchy and then in a separate selection the nodes assigned to this hierarchy. So far it works as designed.
    Case2.
    But when I use the variable for a hierarchy node to restrict key figures, system doesnu2019t change the selection of nodes according to selected hierarchy.
    Example.
    Case 1
    Selecting hierarchy H1 provides nodes HN11 HN12 HN13 ,
    selecting hierarchy H2 provides nodes HN21 HN22 HN23
    Case 2
    Nodes HN11, HN12 HN13 are provided, irrespective of selection of H1 or H2
    Any suggestions?
    Thanks in Advance & Regards
    Joe

    Hi,
    For this issue two types of variables are important:
    Hierarchy selection of hierarchy  to be used for a particular characterietic)
    e.g. H1
    Hierarchy node (selection of nodes within a defined hierarchy)
    e.g.. HN11, HN12, HN13 in dependency of input in variable for hierachy
    Defining hierarchy  as variable and assigning a variable will craete a field for input on the selection screenn.
    Restricting characteristics with a variable for hierarchy nodes creates a second one.
    In case 1, where caharacteristic is allocated to rows, variable for hierarchy nodes offers nodes dependend on settings of variable for hierarchy, i.e. changing selection for hierarchy causes display of different nodes in selection for hierearchy nodes. That's exactly what system should do.
    In case 2, when I use characterietic to restrict a keyfigure with vthe same variable for hierarchy nodes , this variation doesn't take place, offered nodes in selction screen are always the same 
    I know it's a little confusing, but I hope I could clearify my issue.
    Regards
    Joe

  • How can I get Firefox version 5? I use an application for banking that doesn't work with version 6 yet.

    I am using an application for banking with Bank of America that doesn't work with Firefox 6 so I need to install Firefox 5 until Bank of America can update their app to work with Firefox 6. Can you tell me how to find the download for Firefox 5?
    Thank you

    I have an old iPhoto version and it still works with Mavericks, the version before yours, that is puzzling.

  • Missing Data Target in Infopackage for Update ODS Data in Data Target Cube

    Hello & Best Wishes for the New Year to all of you,
    I have 3 ODS (1 on Full Update and 2 with Delta Updates). All these 3 ODS update data to a single CUBE. In my development system this works correctly. Data load from PSA to ODS to Cube.
    Now I transported this to my QA and Production System. In QA and Production System, I am able to load data upto all the 3 ODS and ACTIVATE Data in all these 3 ODS.
    When I am trying for "Update ODS Data in Data Target" to load data from ODS to Cube in QA /PD, the system created Infopackage (ODS to CUBE), doesnot get the Data Target details. (Initial Upload / Full Upload). The Data Target Tab is Blank (expected Cube details).
    I have tried to transport again after deleting the update rules.
    Can you suggest what could be the problem ?
    regards - Rajesh Sarin

    Thanks Dinesh,
    I have the ODS to CUBE Update Rules ACTIVE in the QA and PD system. Still the problem exists only in QA and PD. In DV the ODS to CUBE Data Target is available in the Infopackage and loading the data correctly to Cube.
    Listing all the trials I have done :
    1) Originally transported with all the Collected Objects. Inspite of having Active Update Rules, Data Target Cube was missing in QA and PD.
    2) After this problem, I again transported only the Update Rules through the Transport Connection, still the problem didnot get solved in QA and PD.
    3) Again, I sent a transport to delete the Update Rules which deleted the ODS to CUBE update rules in (DV), QA, PD. After that I sent another request to CREATE the ODS To CUBE UPDATE Rules in (DV), QA and PD. Still the Data Target is missing, inspite of having Active Update Rules in QA and PD.
    In DV the ODS to CUBE Data Target is available and loading the data correctly to Cube, even now.
    4) I have also tried "Generate Export Data Source" for the 3 ODS in QA and PD. Still it doesnot help.
    Can you please suggest ?
    regards - Rajesh Sarin

  • Updater CS5 doesn't work

    the updater in CS5 doesn't work,
    and the most annoying thing is that the link for help is going to a non-existing page !!
    so the updater sucks!

    update manually,
    pre cc updates:  http://www.adobe.com/downloads/updates/
    cc updates:  http://prodesigntools.com/adobe-cc-updates-direct-links-windows.html
    cc 2104 updates:  http://prodesigntools.com/adobe-cc-2014-updates-links-windows.html

  • Updated software doesn't work

    Sooo. I updated software on ipad, now the app buttons just shake, nothing works.  I restarted a few times.   Any thughts? Thanks.

    If it's happening on all the apps that you've downloaded from the App Store, but not the Apple built-in ones, then try downloading any free app from the store (as that appears to reset something) and then re-try them - the free app can then be deleted.
    If it's happening on all apps including Apple's then try closing them all completely and see if they work when you re-open them : from the home screen (i.e.not with any app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of each app to close them, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
    If that doesn't work then you could try a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • When will there be fix for AirPrint in Yosemite? I cannot use my HP printer. I have uninstalled/resinstalled everything you can think of. I have deleted and added my printer more time than I can count. I have checked for updates. Nothing has worked.

    When will there be fix for AirPrint? Since upgrading to Yosemite I cannot print from my MacBook Air which I use mostly. (I can print from the my old 2005 G5 desktop and iPad2 just fine on the same network.) I could print just fine when I had Mavericks. I have tried EVERYTHING under the sun: resetting print system, deleting and adding the printer, checking for updates, uninstalling and reinstalling printer software and folders, turning off modem, router etc. NOTHING works.
    The laptop shows that it is printing but nothing happens. Then it says it cannot locate the printer or there is a broken pipe. But it does tell me that I have a low level in one of the ink cartridges (which is true.)
    Help! I have warned everyone I know not to upgrade. Is there a way to go back to Mavericks?
    MacBook Air (mid 2012), OS 10.10,  HP Officejet 7500a

    This is what appeared on Console:
    11/12/14 12:42:32.558 PM com.apple.preference.printfax.remoteservice[3099]: <NSViewServiceMarshal: 0x7fa398514bd0> failed to complete rights grant 6B212CA9-7872-4726-BA05-68BD5C994479 due to 3
    timestamp: 12:42:32.557 Wednesday 12 November 2014
    process/thread/queue: com.apple.preference.printfax.remoteservice (3099) / 0x7fff78cb4300 / com.apple.main-thread
    code: line 834 of /SourceCache/ViewBridge/ViewBridge-99/NSViewServiceMarshal.m in -[NSViewServiceMarshal invalidateWindowRights]
    #exceptions
    11/12/14 12:42:32.598 PM com.apple.xpc.launchd[1]: (com.apple.preference.printfax.remoteservice[3099]) Service exited due to signal: Killed: 9
    11/12/14 12:42:37.845 PM com.apple.appkit.xpc.openAndSavePanelService[3298]: assertion failed: 14A389: libxpc.dylib + 97940 [9437C02E-A07B-38C8-91CB-299FAA63083D]: 0x89
    11/12/14 12:42:37.879 PM sandboxd[246]: ([3295]) Pages(3295) deny file-read-data /Users/Mom/Downloads/CONM 136 - Study Guide Test 3 (2014).docx
    11/12/14 12:42:37.971 PM sandboxd[246]: ([3295]) Pages(3295) deny file-read-data /Users/Mom/Downloads/12%20angry%20men.docx
    11/12/14 12:42:38.033 PM sandboxd[246]: ([3295]) Pages(3295) deny file-read-data /Users/Mom/Downloads/Quiz%20#2.docx
    11/12/14 12:42:39.712 PM sandboxd[246]: ([3295]) Pages(3295) deny file-read-data /Users/Mom/Downloads/12%20angry%20men.docx
    11/12/14 12:42:39.000 PM kernel[0]: Sandbox: Pages(3295) deny file-read-data /Users/Mom/Downloads/Quiz%20#2.docx
    11/12/14 12:42:39.748 PM sandboxd[246]: ([3295]) Pages(3295) deny file-read-data /Users/Mom/Downloads/12%20angry%20men.docx
    11/12/14 12:42:39.850 PM sandboxd[246]: ([3295]) Pages(3295) deny file-read-data /Users/Mom/Downloads/12%20angry%20men.docx
    11/12/14 12:42:39.874 PM sandboxd[246]: ([3295]) Pages(3295) deny file-read-data /Users/Mom/Downloads/Quiz%20#2.docx
    11/12/14 12:42:39.945 PM sandboxd[246]: ([3295]) Pages(3295) deny file-read-data /Users/Mom/Downloads/Quiz%20#2.docx
    11/12/14 12:42:41.000 PM kernel[0]: Sandbox: storeuid(3051) deny mach-lookup com.apple.dock.server
    11/12/14 12:42:48.968 PM WindowServer[132]: WSGetSurfaceInWindow : Invalid surface 702894100 for window 1378
    11/12/14 12:42:48.968 PM WindowServer[132]: WSGetSurfaceInWindow : Invalid surface 702894100 for window 1378
    11/12/14 12:43:17.000 PM kernel[0]: Sandbox: storeuid(3051) deny mach-lookup com.apple.dock.server
    11/12/14 12:43:23.225 PM com.apple.xpc.launchd[1]: (com.apple.quicklook[3316]) Endpoint has been activated through legacy launch(3) APIs. Please switch to XPC or bootstrap_check_in(): com.apple.quicklook
    11/12/14 12:43:24.355 PM WindowServer[132]: disable_update_timeout: UI updates were forcibly disabled by application "PrinterProxy" for over 1.00 seconds. Server has re-enabled them.
    11/12/14 12:43:24.946 PM WindowServer[132]: common_reenable_update: UI updates were finally reenabled by application "PrinterProxy" after 1.59 seconds (server forcibly re-enabled them after 1.00 seconds)
    11/12/14 12:43:34.503 PM mdworker[3319]: code validation failed in the process of getting signing information: Error Domain=NSOSStatusErrorDomain Code=-67062 "The operation couldn’t be completed. (OSStatus error -67062.)"
    11/12/14 12:43:34.514 PM mdworker[3320]: code validation failed in the process of getting signing information: Error Domain=NSOSStatusErrorDomain Code=-67062 "The operation couldn’t be completed. (OSStatus error -67062.)"
    11/12/14 12:43:34.604 PM mdworker[3318]: code validation failed in the process of getting signing information: Error Domain=NSOSStatusErrorDomain Code=-67062 "The operation couldn’t be completed. (OSStatus error -67062.)"
    11/12/14 12:44:38.628 PM sandboxd[246]: ([3051]) storeuid(3051) deny mach-lookup com.apple.dock.server
    11/12/14 12:44:41.384 PM locationd[63]: Location icon should now be in state 'Active'
    11/12/14 12:44:44.653 PM sandboxd[246]: ([375]) com.apple.metada(375) deny mach-lookup com.apple.cfnetwork.cfnetworkagent
    11/12/14 12:44:44.793 PM sandboxd[246]: ([375]) com.apple.metada(375) deny mach-lookup com.apple.cfnetwork.cfnetworkagent
    11/12/14 12:44:45.149 PM sandboxd[246]: ([375]) com.apple.metada(375) deny mach-lookup com.apple.cfnetwork.cfnetworkagent
    11/12/14 12:44:56.515 PM Console[3327]: Failed to connect (_consoleX) outlet from (NSApplication) to (ConsoleX): missing setter or instance variable
    11/12/14 12:44:56.641 PM locationd[63]: Location icon should now be in state 'Inactive'
    11/12/14 12:44:56.834 PM sandboxd[246]: ([3051]) storeuid(3051) deny mach-lookup com.apple.dock.server
    Not sure what any of this means.

  • Citrix Receiver - AppWorld says for Classic but doesn't work

    (Posted this in the other forum for downloaded apps, reposting here since I seemed to have posted in the wrong forum.)
    http://appworld.blackberry.com/webstore/content/34621918/?lang=en
    Something wrong with the compatibility? Website says compatible with Classic when you mouse over Supported Devices, but when I load it on the device it doesn't work.
    Sideloading from Citrix doesn't work either, it says the app has been replaced and told me to redownload from World.

    Citrix themselves provided a BAR file. I used BB10 App Manager via Dev mode.
    http://www.citrix.com/downloads/citrix-receiver/other-platforms/receiver-for-blackberry10.html

  • Bought game for BB, but doesn't work

    I bought a game on Bplay, and have received 2 mails on my computer about the purchasing. So I had to forward the mail to my phone, and open the link that was in the mail, when I open it on my phone it says:
    "Not Available on DesktopNot Available on Desktop
    Please visit this URL with your BlackBerry device. If you are on your device and believe you arrived here in error, please follow the directions below to ensure you are using the correct browser.
    Push the BlackBerry button (or track-wheel for those without a BlackBerry button) to bring up the menu. Select options.
    Select General Properties.
    Make sure your default browser is: Internet Browser
    Exit out of General Properties and enter Browser Configuration.
    Scroll down to Emulation Mode / Browser Identification and make sure it is set to BlackBerry."
    If I change the things and try it again, it doesn't work again. I payed 9.99 dollar for this, that's not a problem at all, but I really want this game.
    Can someone please help me?
    My pin is: 255CD889
    I almost always respond immediatly and otherwise I'm sleeping and reply when I wake up
    Hope someone can help me!
    thanks

    dzero wrote:
    huh so i payed for nothing?
    first i couldnt download it and a day later they say its valid
    it doesnt work, what you told me on bb messenger.
    what can i do?
    again go to https://www.bplay.com/purchases/regen.php   enter your email address you used for purchase you will get a email with a link go to the link in the email and will take you to a page that shows ALL your past purchases... Click on the resend download link for this game and will then email you a new link to download the game click on that link on your Blackberry.

Maybe you are looking for

  • AMD cool n quiet

    Can I get some BIOS with AMD Cool n Quiet option enabled? I get irritate when my A8 5550m cant get higher than 2.1GHz when the CPU can handle even 3.1GHz. I can fix this with restarting only, and it get back to 2.1GHz when I power on my laptop G405s-

  • How to install internet explorer5.5

    how to install internet explorer 5.5 or above versions in mac so i can run some websites based on it

  • Hopefully a simple answer to a simple question

    Can anyone advise me on the best way to clean my keyboard,please.

  • How to Use 0TCT_C01 Infocube in BW System?

    Hi BW Experts, I want to Install 0TCT_C01, 0TCT_VC01 and 0TCT_MC01 to get the OLAP Statistics Information. Please can anyone help me. What are the Data Sources we need to Use for these Infoproviders?? And what are the settings we need to do?? I read

  • Where is the "import/export" feature for backingup/restoring bookmarks file?

    In 3.6x, I could go to the Bookmarks tab and open the "Export bookmarks" and backup up my bookmarks to an external back up drive. Conversely, I could go to the Bookmarks tab and open the "Import bookmarks" and bring in a saved bookmark file. I upgrad