InfoPackage in Process Chain Error

Hi,
I am working on a 3.1 Dev system which was copied from the Production system. The R/3 system was also copied.
......Prod.....Dev
R/3. LD1 --> LD3
BW. LD6 --> LD5
The process chain is for Master Data Attributes.
The problem i'm having is that the infopackage runs perfectly when scheduled manualy. But, when it is run in the process chain it says it cannot run because of the following error.
"Source system LD1050 is incorrect; not possible to load data"
I had a similar problem with ODS activation which i resolved by running RSRV but cannot seem to figure out how the infopackage can be corrected.
Any help will be appreciated.
thanks
Sid
Message was edited by: Siddhartha Anand

Hi Anuj:
Looks interesting but I did not do this configuration and was wondering if you could elaborate on what this does.
Conversion of source system names after the trans
OrSrceSystTargSrceSy+
DD6_010   DD6_010   DD6 Client 010
LD1045    LD3196    LD3 Client 196
LD1046    LD3196    LD3 Client 196
LD1050    LD3196    LD3 Client 196
LD5010    LD5010    System LD5 Client 010
LD6010    LD5010    System LD5 Client 010
PD1120DEV PD1120DEV PD1 Client 120
Thanks
Sid

Similar Messages

Infopackage in process chain taking long time to run

HI Experts,
One of the element (Infopackage) in process chain(Daily process chain) is taking much longer time(6 hr and still runing) as generally it takes 15-20 mins to complete and the status is in yellow and still running in process monitor without giving any clear picture of error. Manually we are making the staus red and we are updating from PSA and this time it is getting completed in time as specified.
Flow from PSA to datatarget(DSO) in series
For last one week we are facing same issue and i would like to mention that we don't have access to SM37,SM12 to look the logs
and any locks.
without this i need to investigate what is the root cause for the same.
with regards,
murali

Hi,
please find the job log.
Date
Time
Message
MsgID/No./Ty
13.12.2010
21:45:30
Job started
00
516
S
13.12.2010
21:45:30
Step 001 started (program SBIE0001, variant &0000000109368, user ID RFCUSER)
00
550
S
13.12.2010
21:45:30
Asynchronous transmission of info IDoc 2 in task 0001 (0 parallel tasks)
R3
413
S
13.12.2010
21:45:30
DATASOURCE = 2LIS_17_I3HDR
R3
299
S
13.12.2010
21:45:30
RLOGSYS    = PBACLNT200
R3
299
S
13.12.2010
21:45:30
REQUNR     = REQU_D9GSSV08BTS93Z6Y7XWP1ZEUJ
R3
299
S
13.12.2010
21:45:30
UPDMODE    = D
R3
299
S
13.12.2010
21:45:30
LANGUAGES = *
R3
299
S
13.12.2010
21:45:30
R8
048
S
13.12.2010
21:45:30
         Current Values for Selected Profile Parameters               *
R8
049
S
13.12.2010
21:45:30
R8
048
S
13.12.2010
21:45:30
abap/heap_area_nondia......... 0                                       *
R8
050
S
13.12.2010
21:45:30
abap/heap_area_total.......... 25500319744                             *
R8
050
S
13.12.2010
21:45:30
abap/heaplimit................ 40000000                                *
R8
050
S
13.12.2010
21:45:30
zcsa/installed_languages...... ED                                      *
R8
050
S
13.12.2010
21:45:30
zcsa/system_language.......... E                                       *
R8
050
S
13.12.2010
21:45:30
ztta/max_memreq_MB............ 2047                                    *
R8
050
S
13.12.2010
21:45:30
ztta/roll_area................ 3000320                                 *
R8
050
S
13.12.2010
21:45:30
ztta/roll_extension........... 2000000000                              *
R8
050
S
13.12.2010
21:45:30
R8
048
S
13.12.2010
21:45:31
70 LUWs confirmed and 70 LUWs to be deleted with function module RSC2_QOUT_CONFIRM_DATA
RSQU
036
S
13.12.2010
21:45:33
Call customer enhancement BW_BTE_CALL_BW204010_E (BTE) with 9,895 records
R3
407
S
13.12.2010
21:45:33
Result of customer enhancement: 9,895 records
R3
408
S
13.12.2010
21:45:33
Call customer enhancement EXIT_SAPLRSAP_001 (CMOD) with 9,895 records
R3
407
S
13.12.2010
21:45:33
Result of customer enhancement: 9,895 records
R3
408
S
13.12.2010
21:45:33
PSA=0 USING & STARTING SAPI SCHEDULER
R3
299
S
13.12.2010
21:45:33
Asynchronous send of data package 1 in task 0002 (1 parallel tasks)
R3
409
S
13.12.2010
21:45:34
IDOC: Info IDoc 2, IDoc No. 5136702, Duration 00:00:00
R3
088
S
13.12.2010
21:45:34
IDoc: Start = 13.12.2010 21:45:30, End = 13.12.2010 21:45:30
R3
089
S
13.12.2010
21:45:35
Asynchronous transmission of info IDoc 3 in task 0003 (1 parallel tasks)
R3
413
S
13.12.2010
21:45:35
Altogether, 0 records were filtered out through selection conditions
RSQU
037
S
13.12.2010
21:45:35
IDOC: Info IDoc 3, IDoc No. 5136703, Duration 00:00:00
R3
088
S
13.12.2010
21:45:35
IDoc: Start = 13.12.2010 21:45:35, End = 13.12.2010 21:45:35
R3
089
S
13.12.2010
21:55:37
tRFC: Data Package = 1, TID = 0AF0842B00C84D0694000F00, Duration = 00:10:03, ARFCSTATE = SYSFAIL
R3
038
S
13.12.2010
21:55:37
tRFC: Start = 13.12.2010 21:45:34, End = 13.12.2010 21:55:37
R3
039
S
13.12.2010
21:55:37
Synchronized transmission of info IDoc 4 (0 parallel tasks)
R3
414
S
13.12.2010
21:55:37
IDOC: Info IDoc 4, IDoc No. 5136717, Duration 00:00:00
R3
088
S
13.12.2010
21:55:37
IDoc: Start = 13.12.2010 21:55:37, End = 13.12.2010 21:55:37
R3
089
S
13.12.2010
21:55:37
Job finished
00
517
S

Logical system Infopackage in process chain

Dear All,
I want to schedule a logical system delta infopackage in process chain I have input this package in chain but while activating it gives error "InfoPackage ZPAK_44MTIRL52E5IJXMQVL1BXFCWI is generated; NOT able to be used as loading variant" can any body help me how to resolve this issue.
Abhijit

Hi,
I think this package is created automatically while selecting update data into data targets from the context menu of the ods. This kind of packages cannot be used in chains. Goto rsa1->infosources. Select your 8<odsname> infosource and create a delta package manually. Put that package into the chain. That should work.
kind regards
Siggi

Infopackage in process chain is not scheduling

Hi All
One of infopackage in process chain is not scheduling and showing error message like "<b>Attributes are not yet maintained
Entire chain now has status 'R'</b>
what do we mean about this
can anyone will let me know in detail and how to correct this?
Regards
balaji

Hi balaji,
how big is your process chain ? I got a similar problem when I build a metachain with a lot of processes in the chain (more than 60). In this case, the error message is deceiving. If your process chain has similar numbers of processes, check OSS 942804 (Jobcount handling).
Kind regards,
Jürgen

Process chains errors

Hi,
Any one can plz send the process chain errors in BI.I am in support so plz give some process chain errors.
sekhar.
Bye.

Hello Sekhar,
Please find the links might be it can help you..
Re: Process chain error for infopackage
process chains errors
http://help.sap.com/saphelp_nw70/helpdata/en/d3/53e03b8235953ee10000000a114084/content.htm
Please search in SDN you find more help..
Thanks,
Geeta

Common Process chain errors

Hi friends,
Can u please explain cause of below errors in process chain and how to rectify the problem ?
1. Deadlock error.
2. Error in unit conversion
3.Error 1 in update
4.Processing no data
5.Caller 70 missing
6.Idoc not processed completely.
Thanks...
Bala

Hi,
/people/mona.kapur/blog/2008/01/14/process-chain-errors
Deadlock
http://help.sap.com/saphelp_nw04s/helpdata/en/2e/44934257a5c86ae10000000a155106/frameset.htm
Dead Locks
2. Error in unit conversion
\Units of measure
3.Error 1 in update
When Src file is already open or not accessible.
4.Processing no data
theres no data selected after extraction
5.Caller 70 missing
" This error normally occurs whenever BW encounters error and is not able to classify them. There could be multiple reasons for the same
1) Whenever we are loading the Master Data for the first time, it creates SIDs. If system is unable to create SIDs for the records in the Data packet, we can get this error message.
2) If the Indexes of the cube are not deleted, then it may happen that the system may give the caller 70 error.
3)Whenever we are trying to load the Transactional data which has master data as one of the Characteristics and the value does not exist in Master Data table we get this error. System can have difficultly in creating SIDs for the Master Data and also load the transactional data.
4) If ODS activation is taking place and at the same time there is another ODS activation running parallel then in that case it may happen that the system may classify the error as caller 70. As there were no processes free for that ODS Activation.
5) It also occurs whenever there is a Read/Write occurring in the Active Data Table of ODS. For example if activation is happening for an ODS and at the same time the data loading is also taking place to the same ODS, then system may classify the error as caller 70.
6) It is a system error which can be seen under
the Status tab in the Job Over View.
solution:
" If the Master Data is getting loaded for the first time then in that case we can reduce the Data Package size and load the Info Package. Processing sometimes is based on the size of Data Package. Hence we can reduce the data package size and then reload the data again. We can also try to split the data load into different data loads
If the error occurs in the cube load then we can try to delete the indexes of the cube and then reload the data again.
If we are trying to load the Transactional and Master Data together and this error occurs then we can reduce the size of the Data Package and try reloading, as system may be finding it difficult to create SIDs and load data at the same time. Or we can load the Master Data first and then load Tranactional Data
If the error is happening while ODS activation cause of no processes free, or available for processing the ODS activation, then we can define processes in the T Code RSCUSTA2.
If error is occurring due to Read/Write in ODS then we need to make changes in the schedule time of the data loading.
Once we are sure that the data has not been extracted completely, we can then go ahead and delete the red request from the manage tab in the InfoProvider. Re-trigger the InfoPackage again.
Monitor the load for successful completion, and complete the further loads if any in the Process Chain.
6.Idoc not processed completely.
Here the request remains yellow (in process) and with the same details (as seen in the details tab of the monitor) for an abnormally long time. Many-a-times, the port for communication is not open and re-starting the load helps. For long running jobs, it may not be advisable to restart the extraction
Contact the BASIS administrator to push the IDOC.
Thanks

Step by Step documents for Process Chain Error Handling with Screen Shots

Hi
Is anybody having Step By Step Documents for Process Chain Error Handling with Screen Shots ?. Please forward it to me to my e-mail [email protected] . I will reward points to u immediately.
bye
Aamira Khan

Hi,
You can find lots of topic related to process chain issues in SDN.Please make a search in SDN.
https://www.sdn.sap.com/irj/sdn/advancedsearch?cat=sdn_library&query=process+chain&adv=true&sdn_author_name=&sdn_updated_on_comparator=ge&sdn_updated_on=&sortby=cm_rnd_rankvalue
Regards.

Adding infopackage in Process chain

Hi All,
         i am creating processing chain and i am trying to add a infopackage to that.
         but when i press F4 or small square box it is saying there are no infopackage but i have some infopackages created in Datasource.
      while i tried to add DTP it was successful but not able to add infopackages to process chain,
      the process chain is still unassigned is this any thing to deal with this.
      Please hlep me out and i have gone through the blogs in sdn for this but i was not able to figure it out.
Thanks in advance..
Srinivas.

Hi,
if you are displaying in tree format, then you may not be able to find the process chain.(
I do not know the reason, but i had the same issue in past, as i remember. but i solved it)
Please switch to network display in process chain and try again.
In process chain, go to infosource and with crtrl+f searchh the technical name of the infopackage.
Let me know if it helps
Regards
Derya
Edited by: Derya Akcakaya on Apr 16, 2008 10:50 PM

Process chains:Errors Occured..

i have selected my info objects 0CRM_PROD in rsa1 and i entered CALL MONITOR FOR BI OBJECT and then i got a monitor screen in that succesfull(42) it says...in that i have selected 0PRODUCT > TODAY DATE>
I FOUND THAT CR1 LIENT 100
02:04:56 (4 From 4 Records)i entered twise on this and i got HEADER STATUS DETAILS tabs...
in above DETAILS tab
we got a red colour in
Process chains : Error Occured
MD : Business partner & Product
like this... can u please suggest me the resolution for this...
please help me in this regard , thanks

Hi -
Please check
1) Do you have any Red request
2) Did you run delta twice
Regards
Astoria

What are the varoius type of process chain errors how we can solve them.

Hi,
I need to work with process chains maintainace , Can any body tell me what are the different type of process chain errors generelly we used to get ,how we can solve them . IF possible please provide me any document also so that i can solve my
abnormal problems for process chain errors.
Thanks in advance .

Hi,
1) Invalid characters while loading: When you are loading data then you may get some special characters like @#$%...e.t.c.then BW will throw an error like Invalid characters then you need to go through this RSKC transaction and enter all the Invalid chars and execute. It will store this data in RSALLOWEDCHAR table. Then reload the data. You won't get any error because now these are eligible chars done by RSKC.
2) IDOC Or TRFC Error: We can see the following error at u201CStatusu201D Screen:Sending packages from OLTP to BW lead to errorsDiagnosisNo IDocs could be sent to the SAP BW using RFC.System responseThere are IDocs in the source system ALE outbox that did not arrive in the ALE inbox of the SAP BW.Further analysis:Check the TRFC log.You can get to this log using the wizard or the menu path "Environment -> Transact. RFC -> In source system".Removing errors:If the TRFC is incorrect, check whether the source system is completely connected to the SAP BW. Check especially the authorizations of the background user in the source system.Action to be taken:If Source System connection is OK Reload the Data.
For more errors and solutions go thorugh the link below
http://indelasap.blogspot.com/2009/04/sap-bi-production-support-issues.html
Regards,
Marasa.

What are some of the process chain errors one comes across?

hi friends
What are some of the process chain errors one comes across?

Hello Kiran,
Here are some of the errors that come across...
-> Rollup not possible, no filled aggregates available
-> Error when starting the extraction program
-> The process step locked by another changerun
-> Info objet does not contain alpha confirming values
-> Errors due to non activated objects
-> Errors due to duplicate records
-> Errors due to locking
-> Problems because of connection problem between source and bw systems
-> Problems due to RFC
Hope this helps you
Cheers
SRS

How to create infopackage groups & Process chains & what is the difference

Hi gurus,
please help me to create infopackage groups & Process chains & what is the difference.
please explain any realtime scenerios.
when will we choose infopackage groups & process chains
and what is the difference betweeen these two.
Thanks & Regards,
BWcheta

Cheta,
You can create the IPG with the selction of all infopackages in RSA1-Modelling Area to automate those loads automatically. That means it will trigger only those IP's which have been pooled up in that IGP...
Where as Process chain is also a automated process where you can have different process types which can be used during the load and after the load has been done.. For example in ODS once after the data has been loaded if you want to activate the data then in PC youo can insert the process type for that, but in case of IGP it will only execute your IP.
Hope it helps...
******Assign Points*******
Thanks,
Gattu.

What are the practical differences betweens infopackages and process chains

Hi,
what are the practical differences betweens infopackages and process chains.
Thanks,
cheta.

Hello BW,
Hope the following links will give u a clear idea about process chains
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/events/sap-teched-03/using%20process%20chains%20in%20sap%20business%20information%20warehouse
Business Intelligence Old Forum (Read Only Archive)
http://help.sap.com/saphelp_nw2004s/helpdata/en/8f/c08b3baaa59649e10000000a11402f/frameset.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/8da0cd90-0201-0010-2d9a-abab69f10045
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/19683495-0501-0010-4381-b31db6ece1e9
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/36693695-0501-0010-698a-a015c6aac9e1
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/9936e790-0201-0010-f185-89d0377639db
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3507aa90-0201-0010-6891-d7df8c4722f7
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/263de690-0201-0010-bc9f-b65b3e7ba11c
/people/siegfried.szameitat/blog/2006/02/26/restarting-processchains
regards,
Muralidhar Prasad.C

Insert Execute infopackage on process chain maintenance

Hy, i have a serious problem: i can't insert a infopackage on process chain that i created on AWB.
When drag the insert "Execute infopackage process" on process chain and select the match code or F4 button to select an infopackage , receive this message:No data selected.So i can't insert infopackage in my process chain.
Could you help me?
Thank's a lot.
Sincerely yours
Andrea Maraviglia

Hi,
Go to rspc. At top of left pane you can see a data target icon. Click on that. Select your data target. Check the infopackage ckeck box. Here you can select your infopackage.
Try this out.
Regards,
Amruth

Assign infopackage to process chain

Hello All,
how to assign infopackage to process chain.
Thanks & Regards
Priya

Hi,
please RTFM or search the forums. This question has been asked already a lot of times.
regards
Siggi

InfoPackage in Process Chain Error

Similar Messages

Maybe you are looking for