Infopackage in process chain failing due to short dump on regular basis.
HI Experts,
There is a daily process chain in which one of the element (infopackage) fails due to short dump on regular basis (At least twice in a week) please find the message below
Runtime Errors DBIF_RSQL_SQL_ERROR
Exception CX_SY_OPEN_SQL_DB
Short text
SQL error in the database when accessing a table.
And in job log it is showing ARFCSTATE = SYSFAIL
We are able to resolve it just manual update and the process goes fine no issues but my question here is what is the exact reason for this and how to resolve it permanently or decrease the frequency of the error.
Please if any one can tell the root cause and the solution to avoid the issue in future on regular basis.
and also can any one elaborate what is ARFCSTATE = SYSFAIL,for trfc check we don't have access to SM58 in ECC side
and trfc is fine in bw side
Appreciate for not giving the general solutions like repeated solutions already posted in SDN
with regards,
musai
You can contact your BASIS person he can help you reg table space issue. it says used space is 98% and free space is 1.03%.
ask your basis to set a threshold to check the space and send a mail notification to all daily regarding the space allocation and utilization.
ARFCSTATE = SYSFAIL means the TRFC did not processed properly to the BW system from source.
Monitoring object with information about tRFC and qRFC calls that are waiting to be executed in this system; after they have been executed, they are deleted from table ARFCRSTATE.
Are there any hung TRFCs which are not processed to BW side. have you checked it
first check
load monitor -- menu -- environment -- job overview -- status of job(is it finsihed or not?) - check the job log -- ther try to find out the hung TRFc
press find --tyep "sysfail" ok -- it will display all the hung or fialed TRFCs which are not processed to BW system.
if you find the hung TID with respect to your load.. next goto SM58 trasaction to process the trfcs manually or use the load monitor menu -- environment -- transaction RFC -- source sys -- it will take you to same SM58 screen -- click F8 it will display the hung TRFc in that duration.
select the TRFc and click on F6 to process them manually.
also check the loackwaits anddead locks in ST04/DB6COCKPIT.( ask basis to check) if any dead locks are there they will take care of it.
check for short dumps in st22 if any and try to analyse.
Check the SM21 system logs.
Similar Messages
-
Master Data Process chains failing due to special charecters?
hi experts,
we have done all the master data(FI,SD,LO,QM,PM,MM,PP,PS) and created process chains and transported into production system.
when we run the process chains we are facing lot of issues regarding special charecters.
for example. 0MAT_VEND_ATTR Data source.
MATERIAL VENDOR (field - IDNLF).
'UDGÅET
&''UDGÅR
&''UDGÅET
&''36/5599/LED./FÆLLES
&''SØTRANSPORT &
those are the special charecters are coming when i try to execute through RSKC the above Material Vendors, its giving different special chars for different MATERIAL VENDORS like below.
FÆLLESSØTRANSPORT
04/5160/FORSØGSAFD.
(5150)FORSØGSAFD.
like that there are about 15 master data chains are failing.
due to that reason the below transcation chars are not executing.
please suggest me is there any routine or is there any procedure to take care of unpredicted special charecters loading successfully into BW.
regards
venuscmI don't think its a global setting problem.
Permit the char in RSKC...
Check with the functional team why they are getting Special char values in the loads. ask them to rectify the special char so that you can extract the same to BW side.
go through the blog links provided earlier in my post...
Check the below link which might be of some use to you,..
/people/jyothi.velpula/blog/2010/12/23/removing-invalid-characters-using-field-routine
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/d0afbb81-f219-2c10-4181-b20f6b10e373?quicklink=index&overridelayout=true
Edited by: prashanthk on Jan 3, 2011 5:35 PM -
Process chain failed due to activation of a DSO
Hi friends,
Three four days back the process chain has been failed due to the activation error.The issue was with data and i have deleted the request in manage screen and reloaded again as repeat of delta with corrections in PSA. Which is afterwards activation is successful. Now process chain is getting failed daily saying that request is not present in the DSO( Request is no longer exists in the DSO ). But manual activation of DSO is successful.
Please help me in this reagrd.
Regards,
anil
PS: I tried by removing process chain from scheduling and rescheduling back.Hi........
Deleting request from the PSA will not help............what is the update mode of ur ODS..........if it is overwritten............then no probs...load the request again in the target...........if not..........then do one thing...........push the request again in the target.........then...........make the QM status red................then delete the request again............just check whether u face the same issue again or not...........
Generally we face this issue............suppose we load a delta request successfully in the target.........then we delete the request without making the QM status red............and after that next delta also loaded............then while activation...............it will ask for the deleted request...........I think there is some confusion...........and u can try the trick..............it may work............
Regards,
Debjani........ -
Process chain failing (due to back ground jobs)
Dear Friends
Did anybody help me in this topic.
The DTP's of the particular process chain is failing frequently.
The reason is background jobs causing error
why this happens every time?
Did parallel data loading in the DTP may cause any backgound error?
Is it possible for only one update to the DTP at a time?
Thanks in advance for your replies
With Regards
RiyadDear,
Check may be helpful and search SDN you will find many related posts.
Error Transporting Process Chain with 2 DTPs
Regards,
Syed Hussain. -
Load getting failed due to short dump
Hi All,
Process Chain is getting failed due to following short dump Include Report LFZI_CA_PCA_DERIVATIONSU37 not found. Please suggest on rectifying this dump. Its a delta load.
Regards,
AsimHi All
As requested please find details short dump below. And datasource name is this GECPC_GLPCP and its extractor is ZPCC_V_GLPCP.
Short text
Syntax error in program "SAPLZFI_CA_PCA_DERIVATIONS ".
hat happened?
Error in the ABAP Application Program
The current ABAP program "GP9IQHCDEPFH201E24O25IAYXXW" had to be terminated
because it has
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program "SAPLZFI_CA_PCA_DERIVATIONS " in
include "LZFI_CA_PCA_DERIVATIONSUXX " in
line 77:
"INCLUDE report "LZFI_CA_PCA_DERIVATIONSU37" not found"
The include has been created and last changed by:
Created by: "SAP* "
Last changed by: "SAP* "
Error in the ABAP Application Program
The current ABAP program "GP9IQHCDEPFH201E24O25IAYXXW" had to be terminated
because it has
come across a statement that unfortunately cannot be executed.
What can you do?
Please eliminate the error by performing a syntax check
(or an extended program check) on the program "SAPLZFI_CA
You can also perform the syntax check from the ABAP Edito
If the problem persists, proceed as follows:
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can lo
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
The following syntax error was
"INCLUDE report "LZFI_CA_PCA_DE
How to correct the error
Probably the only way to elimin
If you cannot solve the problem
notification to SAP, include th
1. The description of the curre
To save the description, cho
(Unconverted)".
2. Corresponding system log
Display the system log by callin
Restrict the time interval to 10
ter the short dump. Then choose "
nconverted)".
If the problem occurs in a probl
ogram: The source code of the pro
In the editor, choose "Utilities
ilities->Upload/Download->Downloa
Details about the conditions und
tions and input led to the error.
Information on where terminated
Termination occurred in the ABAP program "GP9IQHCDEPFH201E24O25IAYXXW" - in
"START_ROUTINE".
The main program was "RSBATCH_EXECUTE_PROZESS ".
In the source code you have the termination point in line 102
of the (Include) program "ZFICA_DERIVE_PCA_OBJECTS_S".
The program "GP9IQHCDEPFH201E24O25IAYXXW" was started as a background job.
Job Name....... "BIDTPR_6726959_1"
Job Initiator.. "ALEREMOTE"
Job Number..... 17271800
Line SourceCde
72 ASSIGN 'L_DERIVE_CHRT_ACCTS-UPD_CHRT_AC
73 assign (<derive_chrt_accts_field>) to
74 IF <derive_chrt_accts> IS ASSIGNED.
75 zzi_attributes_upd-chrt_accts_upd = '
76 ENDIF.
77 zzi_attributes_upd-/bic/gactivity_upd
78 zzi_attributes_upd-/bic/gfactv_upd
79 zzi_attributes_upd-/bic/gglobacct_upd
80 zzi_attributes_upd-/bic/ggforacc_upd
81 zzi_attributes_upd-/bic/ggrracc_upd
82 zzi_attributes_upd-/bic/ggra_code_upd
83 zzi_attributes_upd-/bic/gsegmtion_upd
84 zzi_attributes_upd-/bic/ggaapflg_upd
85 zzi_attributes_upd-/bic/gsub_item_upd
86 zzi_attributes_upd-/bic/gsegmnt_upd
87 zzi_attributes_upd-/bic/gacctgrp_upd
88 zzi_attributes_upd-comp_code_details_up
89 zzi_attributes_upd-gbfi0600_upd
90 zzi_attributes_upd-/bic/zaccsuf_upd
91 zzi_attributes_upd-/bic/gconunit_upd
92 zzi_attributes_upd-/bic/gtpunit_upd
93 *--------------------------------------
94 * Store a copy of the source fields if
95 *--------------------------------------
96 MOVE-CORRESPONDING <source_fields> TO z
97 CLEAR zze_attributes.
Runtime Errors SYNTAX_ERROR
Date and Time 04.08.2014 17:27:39
98 *----------------------------------------------------------------------*
99 * Derive all PCA fields for reporting
100 *----------------------------------------------------------------------*
101
>>>>> CALL FUNCTION 'ZFI_CA_DERIVE_PCA_ATTRIBUTESII'
103 EXPORTING
104 i_zfi_ca_pca_attributes = zzi_attributes
105 i_zfi_ca_pca_attributes_upd = zzi_attributes_upd
106 msgty = 'I'
107 recno = <source_fields>-record
108 IMPORTING
109 e_zfi_ca_pca_attributes = zze_attributes
110 TABLES
111 monitor_recno = lt_monitor_recno.
112
113 *----------------------------------------------------------------------*
114 * On the recurrsive load delete entries where the data is the same
115 *----------------------------------------------------------------------*
116 IF zzg_realignment_run = 'X'.
117 IF zzi_attributes = zze_attributes.
118 DELETE source_package INDEX la_tabix.
119 ELSE.
120 MOVE-CORRESPONDING zze_attributes TO <source_fields>.
121 ENDIF.
SY-SUBRC 0
SY-INDEX 3
SY-TABIX 1
SY-DBCNT 10
SY-FDPOS 0
SY-LSIND 0
SY-PAGNO 0
SY-LINNO 1
SY-COLNO 1
SY-PFKEY
SY-UCOMM
SY-TITLE Execute Batch Proces
SY-MSGTY E
SY-MSGID R7
SY-MSGNO 057
SY-MSGV1 ZBAL_LC
SY-MSGV2 A
SY-MSGV3
SY-MSGV4
SY-MODNO 0
SY-DATUM 20140804
SY-UZEIT 172720
SY-XPROG SAPCNVE
SY-XFORM CONVERSION_EXIT
No. Ty. Program Include Line
Name
8 FUNCTION GP9IQHCDEPFH201E24O25IAYXXW ZFICA_DERIVE_PCA_OBJECTS_S 102
START_ROUTINE
7 METHOD GP9IQHCDEPFH201E24O25IAYXXW ZFICA_DERIVE_PCA_OBJECTS_S 102
LCL_TRANSFORM=>START_ROUTINE
6 METHOD GP9IQHCDEPFH201E24O25IAYXXW GP9IQHCDEPFH201E24O25IAYXXW 1299
LCL_TRANSFORM=>EXECUTE
5 METHOD CL_RSTRAN_TRFN_CMD============CP CL_RSTRAN_TRFN_CMD============CM005 70
CL_RSTRAN_TRFN_CMD=>IF_RSBK_CMD_T~TRANSFORM
4 METHOD CL_RSBK_PROCESS===============CP CL_RSBK_PROCESS===============CM00Q 93
CL_RSBK_PROCESS=>PROCESS_REQUEST
3 METHOD CL_RSBK_PROCESS===============CP CL_RSBK_PROCESS===============CM002 13
CL_RSBK_PROCESS=>IF_RSBATCH_EXECUTE~EXECUTE
2 FUNCTION SAPLRSBATCH LRSBATCHU13 437
RSBATCH_EXECUTE_PROCESS
1 EVENT RSBATCH_EXECUTE_PROZESS RSBATCH_EXECUTE_PROZESS 374
START-OF-SELECTION
REQUEST
DTPR_1FR9TKO2U6M616ATG9C2EYKRH
455553453544353433345434345454
4402F16294BF256D61614793259B28
000000000000000000000000000000
000000000000000000000000000000
DATAPACKID
000001
333333
000001
000000
000000
MONITOR
Table[initial]
SOURCE_PACKAGE
3000000001012P2013K4AU0ACD 2013005 00 0
3333333333333533334345344423333333222222222233222222222222222222222222222222222222222222222223
300000000101202013B415013402013001000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
3333333333333533334345344423333333222222222233222222222222222222222222222222222222222222222223
300000000101202013B415013402013002000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
3333333333333533334345344423333333222222222233222222222222222222222222222222222222222222222223
300000000101202013B415013402013003000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
3333333333333533334345344423333333222222222233222222222222222222222222222222222222222222222223
300000000101202013B415013402013004000000000000000000000000000000000000000000000000000000000000
00000000000000000000000000000000000
00000000000000000000000000000000000
33333333333335333343453444233333332
300000000101202013B4150134020130050
00000000000000000000000000000000000
00000000000000000000000000000000000
Table IT_110723[600000x1144]
{A:114*\TYPE=%_T00003S00000115O0000
Table reference: 3570
TABH+ 0(20) = 90A161080000000060C1
TABH+ 20(20) = F20D000083B00100C027
TABH+ 40(16) = 03730000242D00000400
store = 0x90A1610800000000
ext1 = 0x60C1190C00000000
shmId = 0 (0x00000000)
id = 3570 (0xF20D0000)
label = 110723 (0x83B00100)
fill = 600000 (0xC0270900)
leng = 1144 (0x78040000)
loop = 128 (0x80000000)
xtyp = ROL.115.11556
occu = 4 (0x04000000)
accKind = 1 (ItAccessStand
idxKind = 0 (ItIndexNone)
uniKind = 2 (ItUniNo)
keyKind = 1 (default)
cmpMode = 8 (cmpManyEq)
occu0 = 1
stMode = 0
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 1
sharedWithShmTab = 0
isShmLockId = 0
isUsed = 1
isCtfyAble = 1
hasScndKeys = 0
hasRowId = 0
scndKeysOutdated = 0
scndUniKeysOutdated = 0
----- Shareable Table Header Data -----
tabi = 0xB008190C00000000
pgHook = 0x404CE73B00000000
idxPtr = 0x0000000000000000
id = 61767 (0x47F10000)
shmTabhSet = 0x0000000000000000
refCount = 1 (0x01000000)
tstRefCount = 0 (0x00000000)
lineAdmin = 606204 (0xFC3F0900)
lineAlloc = 600004 (0xC4270900)
shmVersId = 0 (0x00000000)
shmRefCount = 2 (0x02000000)
rowId = 18446744073709551615
scndKeyAdmin = 0x0000000000000000
----- 1st level extension part --------
regHook = 0xC8C0190C00000000
collHook = 0x0000000000000000
ext2 = 0x0000000000000000
RI-CLUSTR
0
00
00
ZE_ATTRIBUTES
00000
22222222222222222233333
00000000000000000000000
00000000000000000000000
00000000000000000000000
ZI_ATTRIBUTES
AU0A 070221000020130
45342222333333333333333
15010000070221000020130
00000000000000000000000
00000000000000000000000
ZI_ATTRIBUTES_UPD
XXXXX XXXXXX XX XXXX
55555255555522552555522
88888088888800880888800
00000000000000000000000
00000000000000000000000
SOURCE_FIELDS>-RECORD
1
0000
1000
T_MONITOR_RECNO
Table[initial]
ZG_REALIGNMENT_RUN
2
Regards,
Asim
GECPC_GLPCP -
How to catch the error if an RFC fails due to short dump
Hi All,
I was calling the RFC Function module in parallel processing depends on the number of work processors available. I am getting the return message from the Function module using the perform statement
PERFORMING task_return ON END OF TASK
But I am not able to catch the errors if the RFC has been terminated due to the dump or manually killing the RFC while running.
I need how to handle the RFC if the call has been terminated due to the dump or system failure. Does the RFC return the sy-subrc at this time or can we able to catch the error in any other way.
Thanks & regards,
VijayHello Vijay,
If you're calling RFC from outside SAP using the OCX-SAPFunctions-Library, then you can catch the dump or any other exception occuring in your SAP-Function.
Assuming that, objRFCFunc is the RFC-Function you can get the Excepetion-Code through objRFCFunc.Exception.
It returns a String. If the error was a dump, the String is "SYSTEM_FAILURE". If it is a "regular" Exception you'll get the Exceptioncode. E.g. "NO_DATA_FOUND".
If you need any sample code e.g. VBA-code for use in Office-Applications, let me know.
regards
Sven -
Process chain failed.. plz help
Hi frnds ,
My chain is modelled like this.
start-- local where local is again start-- program1-- program3
program2 - and Program4.
My chain failed at program1 , and program2 has got through successfully.
Program1 failed to job cancelled due to short dump :MESSAGE_TYPE_UNKNOWN.
If i wnat to rerun the chain , shoud i make program 2 to be terminated ???
tell me how can i rerun the chain and also possible erros of failures of program1
Regards ,
Pavanwht is there in Programs?
why it is failed. try to analyze it. they you can think about rerun the process chain.,
Nagesh Ganisetti. -
What will u do if process chain fails?
Hi gurus
What will u do if process chain fails?
Thank in advance?
RajuHi rajaiah
Firstly if a process chain fails, identify the process that has failed and on the context menu of the failed process you will get an option called display message where you can find the exact reason for the failure. A process chain can fail in many cases. So first try to find the error occured . For example if a process chain has failed due to invalid records then we have to edit the psa and reload the data from psa to data target (reconstruction). Based on the error message you need to take the necessary actions...
Hope this may help you.. please assign points if found helpful.
Regards,
Harish. -
Why will Process chain fail..
Hello,
Could you please provide me the reasons for failing process chains.
Thanks in advance,
G RaghuHi...........
1) Suppose a PC starts twice at the same time............then Start Process will fail due to Lock issue........PC will not proceed.......In this situation Start process will remain yellow for a long time......and if you check the job log.........you can see that job is cancelled.................
2) Suppose when a PC is in progress........someone again schedule the PC..........then it will stop at the point........when the PC was scheduled again..........it will not proceed furthur.........
3) Status of Data provider can fail............Suppose one target is not loaded in the defined time...........then this process will fail...........PC will stop.....
4) Drop Pass through can fail...................Suppose data is loade from Y1 to Y2.............but not loaded in Y3( Propagation memory).............this process will fail.....
5) Attribute change Run can fail................
6) * Run or Skip is fail*................Suppose whatever parameters maintained in table YGTTC_SKIP_PARAM for a IP does'nt match then this process will fail.................
7) Loads can fail due to several reasons.............
Hope this helps you........
Regards,
Debjani............ -
Using Alert Framework to send email notifications when Process Chain fails
Hi Everyone,
I've configured ALRTCATDEF in Solution Manager, selected the alerting option for Process Chains in - RSPC > Attributes > Alerting, but it looks like whenever any process chain fails, an email notification will be sent to the same recipients.
Is there anyway to have an ALRCATDEF - alert category for different process chains, so that different recipients receive notifications for different Process Chains.
Thanks,
KenInteresting....I was actually hoping for different recipients for different process chains.
E.g. for our
CRM process chain - Support Team 1
FI process chain - Support Team 2
and so on and so on.
I think the only way may be creating a custom process type and implementing a class for this process type that calls function SALRT_CREATE_API. Then adding this process type to the process chain, with a different variant for each.
However if anyone knows a way to do this in a SAP standard way using the Alert Framework, that would be great.
Cheers,
Ken -
Infopackage in process chain taking long time to run
HI Experts,
One of the element (Infopackage) in process chain(Daily process chain) is taking much longer time(6 hr and still runing) as generally it takes 15-20 mins to complete and the status is in yellow and still running in process monitor without giving any clear picture of error. Manually we are making the staus red and we are updating from PSA and this time it is getting completed in time as specified.
Flow from PSA to datatarget(DSO) in series
For last one week we are facing same issue and i would like to mention that we don't have access to SM37,SM12 to look the logs
and any locks.
without this i need to investigate what is the root cause for the same.
with regards,
muraliHi,
please find the job log.
Date
Time
Message
MsgID/No./Ty
13.12.2010
21:45:30
Job started
00
516
S
13.12.2010
21:45:30
Step 001 started (program SBIE0001, variant &0000000109368, user ID RFCUSER)
00
550
S
13.12.2010
21:45:30
Asynchronous transmission of info IDoc 2 in task 0001 (0 parallel tasks)
R3
413
S
13.12.2010
21:45:30
DATASOURCE = 2LIS_17_I3HDR
R3
299
S
13.12.2010
21:45:30
RLOGSYS = PBACLNT200
R3
299
S
13.12.2010
21:45:30
REQUNR = REQU_D9GSSV08BTS93Z6Y7XWP1ZEUJ
R3
299
S
13.12.2010
21:45:30
UPDMODE = D
R3
299
S
13.12.2010
21:45:30
LANGUAGES = *
R3
299
S
13.12.2010
21:45:30
R8
048
S
13.12.2010
21:45:30
Current Values for Selected Profile Parameters *
R8
049
S
13.12.2010
21:45:30
R8
048
S
13.12.2010
21:45:30
abap/heap_area_nondia......... 0 *
R8
050
S
13.12.2010
21:45:30
abap/heap_area_total.......... 25500319744 *
R8
050
S
13.12.2010
21:45:30
abap/heaplimit................ 40000000 *
R8
050
S
13.12.2010
21:45:30
zcsa/installed_languages...... ED *
R8
050
S
13.12.2010
21:45:30
zcsa/system_language.......... E *
R8
050
S
13.12.2010
21:45:30
ztta/max_memreq_MB............ 2047 *
R8
050
S
13.12.2010
21:45:30
ztta/roll_area................ 3000320 *
R8
050
S
13.12.2010
21:45:30
ztta/roll_extension........... 2000000000 *
R8
050
S
13.12.2010
21:45:30
R8
048
S
13.12.2010
21:45:31
70 LUWs confirmed and 70 LUWs to be deleted with function module RSC2_QOUT_CONFIRM_DATA
RSQU
036
S
13.12.2010
21:45:33
Call customer enhancement BW_BTE_CALL_BW204010_E (BTE) with 9,895 records
R3
407
S
13.12.2010
21:45:33
Result of customer enhancement: 9,895 records
R3
408
S
13.12.2010
21:45:33
Call customer enhancement EXIT_SAPLRSAP_001 (CMOD) with 9,895 records
R3
407
S
13.12.2010
21:45:33
Result of customer enhancement: 9,895 records
R3
408
S
13.12.2010
21:45:33
PSA=0 USING & STARTING SAPI SCHEDULER
R3
299
S
13.12.2010
21:45:33
Asynchronous send of data package 1 in task 0002 (1 parallel tasks)
R3
409
S
13.12.2010
21:45:34
IDOC: Info IDoc 2, IDoc No. 5136702, Duration 00:00:00
R3
088
S
13.12.2010
21:45:34
IDoc: Start = 13.12.2010 21:45:30, End = 13.12.2010 21:45:30
R3
089
S
13.12.2010
21:45:35
Asynchronous transmission of info IDoc 3 in task 0003 (1 parallel tasks)
R3
413
S
13.12.2010
21:45:35
Altogether, 0 records were filtered out through selection conditions
RSQU
037
S
13.12.2010
21:45:35
IDOC: Info IDoc 3, IDoc No. 5136703, Duration 00:00:00
R3
088
S
13.12.2010
21:45:35
IDoc: Start = 13.12.2010 21:45:35, End = 13.12.2010 21:45:35
R3
089
S
13.12.2010
21:55:37
tRFC: Data Package = 1, TID = 0AF0842B00C84D0694000F00, Duration = 00:10:03, ARFCSTATE = SYSFAIL
R3
038
S
13.12.2010
21:55:37
tRFC: Start = 13.12.2010 21:45:34, End = 13.12.2010 21:55:37
R3
039
S
13.12.2010
21:55:37
Synchronized transmission of info IDoc 4 (0 parallel tasks)
R3
414
S
13.12.2010
21:55:37
IDOC: Info IDoc 4, IDoc No. 5136717, Duration 00:00:00
R3
088
S
13.12.2010
21:55:37
IDoc: Start = 13.12.2010 21:55:37, End = 13.12.2010 21:55:37
R3
089
S
13.12.2010
21:55:37
Job finished
00
517
S -
Logical system Infopackage in process chain
Dear All,
I want to schedule a logical system delta infopackage in process chain I have input this package in chain but while activating it gives error "InfoPackage ZPAK_44MTIRL52E5IJXMQVL1BXFCWI is generated; NOT able to be used as loading variant" can any body help me how to resolve this issue.
AbhijitHi,
I think this package is created automatically while selecting update data into data targets from the context menu of the ods. This kind of packages cannot be used in chains. Goto rsa1->infosources. Select your 8<odsname> infosource and create a delta package manually. Put that package into the chain. That should work.
kind regards
Siggi -
Sending mail to GROUP ID when a process chain fails.
Hi All,
Can one suggest me, how to send a failure/success mail to a Group mial id when a process chain fails.
I am awere about sending mails to individual mail id's when a any process fails or succed. I want to know the group ID creation part & how to tag the same SOCT.
Thanks in advance.
BR,
Kiron.hi,
The Distribution List/Group_id is created in SO23 transaction.
hope it is helpful to u
thanks -
Adding infopackage in Process chain
Hi All,
i am creating processing chain and i am trying to add a infopackage to that.
but when i press F4 or small square box it is saying there are no infopackage but i have some infopackages created in Datasource.
while i tried to add DTP it was successful but not able to add infopackages to process chain,
the process chain is still unassigned is this any thing to deal with this.
Please hlep me out and i have gone through the blogs in sdn for this but i was not able to figure it out.
Thanks in advance..
Srinivas.Hi,
if you are displaying in tree format, then you may not be able to find the process chain.(
I do not know the reason, but i had the same issue in past, as i remember. but i solved it)
Please switch to network display in process chain and try again.
In process chain, go to infosource and with crtrl+f searchh the technical name of the infopackage.
Let me know if it helps
Regards
Derya
Edited by: Derya Akcakaya on Apr 16, 2008 10:50 PM -
Infopackage in process chain is not scheduling
Hi All
One of infopackage in process chain is not scheduling and showing error message like "<b>Attributes are not yet maintained
Entire chain now has status 'R'</b>
what do we mean about this
can anyone will let me know in detail and how to correct this?
Regards
balajiHi balaji,
how big is your process chain ? I got a similar problem when I build a metachain with a lot of processes in the chain (more than 60). In this case, the error message is deceiving. If your process chain has similar numbers of processes, check OSS 942804 (Jobcount handling).
Kind regards,
Jürgen
Maybe you are looking for
-
How do i move info from ibook to macmini?
I have an older ibook g4 and I want to move most of the file, music and photos over to the new mini. I picked up a firewire 400 to 800 to connect the two machines. Everything is hooked up but I can not see either machine on the other. If I hook up
-
Insufficient space in Javaheap Error when installing BIEE 10.1.3.4 on linux
Hi, I am trying to install OBIEE 10.1.3.4 on Linux Enterprise 4 on a VM machine. When the installer reaches 20% it shuts down with the following error. Can someone please tell me how to resolve this as I am not able to install BIEE. I have 4GB of RAM
-
Hi, I have a movie that I have used the UIscrollBar in within various nested movieclips. The text is contained in a series of vars which is then called into the dynamic text box. Everything works fine when I test the swf in flash, and also works in I
-
Show email photo full screen on iPad
I received a photo attachment in an email. How do I see the photo full screen? I don't want to see the email column on the left side, just the photo.
-
Slow will reset speed up the iPad
My iPad seems to be slower, will going to the rest option help, any suggestions. Thanks