InfoPackage is generated; NOT able to be use as variant.

Hi Experts ,
when i am creating process chain itgives me an erro like
InfoPackage ZPAK_4JC3WU0BJTYAY158ED085A45W is generated; NOT able to be used as loading variant
1) Start variant
2) Delete index
3) load info packe
4) create index
when i am activate it gives me above error massage in the 3 rd step .
i tried to include any info package it gives me same error.
Any suggestion realy appriciated
thanks in advance
Regards,
ve.

Hi Sudeep,
thanks for u suggestion , but i have tried manually it is loading good. but when i am include those infopackage in process chain it gives me error massage like Infopackage is generated not able to be use as variant.
Even i tried another infopacke and another start variants it gives same error.
any help really appriciated.
BR,
/ve.

Similar Messages

Error in Info Package - NOT able to be used as loading variant

Hii All
I develop a process chain where I extract data from ODS to Cube. Now I am getting an error. A info pkg for extracting data from ODS to Cube giving error message of InfoPackage ZPAK_XXX is generated; NOT able to be used as loading variant.
I am not able to understand why this error is coming ??
Plz tell me how to resolve it ??
I searched some documents but not cleared.
Thanks in advance
Neha

Hi
Create a new infopackage and try loading.
You can also refer to
[Full load ODS to ODS in a Process chain;
[Process chain;

11g R2(11.2.0.2)-Not able to connect using SID - Win 7 32 bit

Hi Experts,
I have installed 11gR2(11.2.0.2) on Win 7 32 bit OS.
I am able to start database and listener services without any problem. ORACLE_BASE and ORACLE_HOME variables are set.
I am even able to connect to database using "sqlplus user/pass". (With ORACLE_SID variable set)
However, sqlplus command hangs when I try to connect using SID "sqlplus user/pass@o11gr2".
(No error, after waiting for >20 minutes I have to kill the command.)
=================
Following in "C:\Oracle\product\11.2.0.2\dbhome_3\RDBMS\trace\o11gr2_ora_6352.trc"
- "2012-04-05 09:50:55.846: [ default]ut_read_reg:2:ocr registry key SOFTWARE\Oracle\ocr cannot be opened. error 2"
Following in "C:\Oracle\product\11.2.0.2\dbhome_3\log\machinename\client"
- 2012-04-26 14:35:18.781: [ default][1216]ut_read_reg:2:ocr registry key SOFTWARE\Oracle\olr cannot be opened. error 2
[ CLSE][1216]clse_get_crs_home: Error retrieving OLR configuration [0] [Error opening olr registry key. The system cannot find the file specified.
"tnsping" returns OK for "tnsping o11gr2", "tnsping localhost", "tnsping 127.0.0.1", "tnsping 192.168.0.1"
Output of LSNRCTL:
LSNRCTL> status
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=J1009615W7LT.jda.corp.local)(PORT=1521)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 32-bit Windows: Version 11.2.0.2.0 - Production
Start Date 26-APR-2012 14:35:17
Uptime 0 days 0 hr. 4 min. 6 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File C:\Oracle\product\11.2.0.2\dbhome_3\network\admin\listener.ora
Listener Log File C:\Oracle\diag\tnslsnr\J1009615W7LT\listener\alert\log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=J1009615W7LT.jda.corp.local)(PORT=1521)))
Services Summary...
Service "O11GR2" has 2 instance(s).
Instance "O11GR2", status UNKNOWN, has 1 handler(s) for this service...
Instance "O11GR2", status READY, has 1 handler(s) for this service...
The command completed successfully
=================
This was working earlier. One day it stopped working all of a suddent and I am not able to connect using SID till now.
I tried re-installing in different home multiple times. But no luck even after disabling firewall completely.
Any suggest/help is greatly appreciated on this.

------------------------------tnsping-------------------------
C:\>tnsping o11gr2
TNS Ping Utility for 32-bit Windows: Version 11.2.0.2.0 - Production on 26-APR-2012 14:54:32
Copyright (c) 1997, 2010, Oracle. All rights reserved.
Used parameter files:
C:\Oracle\product\11.2.0.2\dbhome_3\network\admin\sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)(HOST = J1009615W7LT.jda.corp.local)(PORT = 1521
))) (CONNECT_DATA = (SERVICE_NAME = O11GR2)))
OK (30 msec)
C:\>
-----------------------------ping-------------------------------
C:\>ping J1009615W7LT.jda.corp.local
Pinging J1009615W7LT.jda.corp.local [fe80::20c9:b748:311a:95e4%14] with 32 bytes of data:
Reply from fe80::20c9:b748:311a:95e4%14: time<1ms
Reply from fe80::20c9:b748:311a:95e4%14: time<1ms
Reply from fe80::20c9:b748:311a:95e4%14: time<1ms
Reply from fe80::20c9:b748:311a:95e4%14: time<1ms
Ping statistics for fe80::20c9:b748:311a:95e4%14:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 0ms, Average = 0ms
C:\>ping 10.60.200.221
Pinging 10.60.200.221 with 32 bytes of data:
Reply from 10.60.200.221: bytes=32 time<1ms TTL=64
Reply from 10.60.200.221: bytes=32 time<1ms TTL=64
Reply from 10.60.200.221: bytes=32 time<1ms TTL=64
Reply from 10.60.200.221: bytes=32 time<1ms TTL=64
Ping statistics for 10.60.200.221:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 0ms, Average = 0ms
C:\>
-----------------------------C:\Oracle\diag\tnslsnr\J1009615W7LT\listener\alert\log.xml---------------------------------
</msg>
<msg time='2012-04-26T14:35:18.855-04:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='J1009615W7LT'
host_addr='fe80::20c9:b748:311a:95e4%14'>
<txt>
TIMESTAMP * CONNECT DATA [* PROTOCOL INFO] * EVENT [* SID] * RETURN CODE
</txt>
</msg>
<msg time='2012-04-26T14:35:26.200-04:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='J1009615W7LT'
host_addr='fe80::20c9:b748:311a:95e4%14'>
<txt>26-APR-2012 14:35:26 * ping * 0
</txt>
</msg>
<msg time='2012-04-26T14:35:43.204-04:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='J1009615W7LT'
host_addr='fe80::20c9:b748:311a:95e4%14'>
<txt>26-APR-2012 14:35:43 * ping * 0
</txt>
</msg>
<msg time='2012-04-26T14:35:55.952-04:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='J1009615W7LT'
host_addr='fe80::20c9:b748:311a:95e4%14'>
<txt>Dynamic address is already listened on (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=J1009615W7LT.jda.corp.local)(PORT=1521)))
</txt>
</msg>
<msg time='2012-04-26T14:35:55.953-04:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='J1009615W7LT'
host_addr='fe80::20c9:b748:311a:95e4%14'>
<txt>26-APR-2012 14:35:55 * service_register * O11GR2 * 0
</txt>
</msg>
<msg time='2012-04-26T14:37:08.732-04:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='J1009615W7LT'
host_addr='fe80::20c9:b748:311a:95e4%14'>
<txt>26-APR-2012 14:37:08 * ping * 0
</txt>
</msg>
<msg time='2012-04-26T14:38:34.943-04:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='J1009615W7LT'
host_addr='fe80::20c9:b748:311a:95e4%14'>
<txt>26-APR-2012 14:38:34 * (CONNECT_DATA=(SERVICE_NAME=O11GR2)(CID=(PROGRAM=C:\oracle\product\11.2.0.2\dbhome_3\bin\sqlplus.exe)(HOST=J1009615W7LT)(USER=j1009615))) * (ADDRESS=(PROTOCOL=tcp)(HOST=fe80::20c9:b748:311a:95e4%14)(PORT=51907)) * establish * O11GR2 * 0
</txt>
</msg>
<msg time='2012-04-26T14:39:23.627-04:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='J1009615W7LT'
host_addr='fe80::20c9:b748:311a:95e4%14'>
<txt>WARNING: Subscription for node down event still pending
</txt>
</msg>
<msg time='2012-04-26T14:39:23.628-04:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='J1009615W7LT'
host_addr='fe80::20c9:b748:311a:95e4%14'>
<txt>26-APR-2012 14:39:23 * (CONNECT_DATA=(CID=(PROGRAM=)(HOST=)(USER=j1009615))(COMMAND=status)(ARGUMENTS=64)(SERVICE=LISTENER)(VERSION=186647040)) * status * 0
</txt>
</msg>
<msg time='2012-04-26T14:54:25.550-04:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='J1009615W7LT'
host_addr='fe80::20c9:b748:311a:95e4%14'>
<txt>System parameter file is C:\Oracle\product\11.2.0.2\dbhome_3\network\admin\listener.ora
</txt>
</msg>
<msg time='2012-04-26T14:54:25.551-04:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='J1009615W7LT'
host_addr='fe80::20c9:b748:311a:95e4%14'>
<txt>Log messages written to C:\Oracle\diag\tnslsnr\J1009615W7LT\listener\alert\log.xml
</txt>
</msg>
<msg time='2012-04-26T14:54:25.552-04:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='J1009615W7LT'
host_addr='fe80::20c9:b748:311a:95e4%14'>
<txt>Trace information written to C:\Oracle\diag\tnslsnr\J1009615W7LT\listener\trace\ora_11640_3776.trc
</txt>
</msg>
<msg time='2012-04-26T14:54:25.553-04:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='J1009615W7LT'
host_addr='fe80::20c9:b748:311a:95e4%14'>
<txt>Trace level is currently 0
</txt>
</msg>
<msg time='2012-04-26T14:54:25.553-04:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='J1009615W7LT'
host_addr='fe80::20c9:b748:311a:95e4%14'>
<txt>
</txt>
</msg>
<msg time='2012-04-26T14:54:25.555-04:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='J1009615W7LT'
host_addr='fe80::20c9:b748:311a:95e4%14'>
<txt>Started with pid=11640
</txt>
</msg>
<msg time='2012-04-26T14:54:25.560-04:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='J1009615W7LT'
host_addr='fe80::20c9:b748:311a:95e4%14'>
<txt>Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=J1009615W7LT.jda.corp.local)(PORT=1521)))
</txt>
</msg>
<msg time='2012-04-26T14:54:26.695-04:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='J1009615W7LT'
host_addr='fe80::20c9:b748:311a:95e4%14'>
<txt>Listener completed notification to CRS on start
</txt>
</msg>
<msg time='2012-04-26T14:54:26.712-04:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='J1009615W7LT'
host_addr='fe80::20c9:b748:311a:95e4%14'>
<txt>
TIMESTAMP * CONNECT DATA [* PROTOCOL INFO] * EVENT [* SID] * RETURN CODE
</txt>
</msg>
<msg time='2012-04-26T14:54:29.880-04:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='J1009615W7LT'
host_addr='fe80::20c9:b748:311a:95e4%14'>
<txt>Dynamic address is already listened on (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=J1009615W7LT.jda.corp.local)(PORT=1521)))
</txt>
</msg>
<msg time='2012-04-26T14:54:29.881-04:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='J1009615W7LT'
host_addr='fe80::20c9:b748:311a:95e4%14'>
<txt>26-APR-2012 14:54:29 * service_register * O11GR2 * 0
</txt>
</msg>
<msg time='2012-04-26T14:54:32.090-04:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='J1009615W7LT'
host_addr='fe80::20c9:b748:311a:95e4%14'>
<txt>26-APR-2012 14:54:32 * ping * 0
</txt>
</msg>
Edited by: 850920 on Apr 26, 2012 11:59 AM

Not able to login using ORACLE USER in Linux

I am not able to login using OS user ORACLE in linux,
I am getting following error when trying to login
/etc/X!!/gdm/PreSession/Default : Registering your session with wtmp and utmp
/etc/X!!/gdm/PreSession/Default :running : /usr/bin/X11/sessreg -a -w /var/log/log/wtmp -u /var/run/utmp -x "/var/gdm/:0.Xservers" -h "" -1" : 0" "oracle"
/etc/profile: line 17 : syntax error near unexpected token 'then'
/etc/profile: line 17 ' if[ $USER = "oracle" ]; then'
Failed to execute message bus daemon : No such file or directory
EOF in dbus-launch reading address from bus daemon
I tried to edit /etc/profile file but not sucessfull. Please help me out . This installtion is on VM ware
Edited by: user12356407 on Dec 16, 2009 3:21 AM

user8896383 wrote:
I am not successful to login using Oracle User .
I tried to edit /etc/profile file on Line 17 , but of no use.
could you please be more precise about what exactly i should look in or edit in that file.
Thanks for your immediate response.My car doesn't start
I tried to fix it
It still doesn't start.
Can you be more precise in telling how to fix it.

TS1702 How do I get an app that I paid for transferred over to my iPhone? I paid for it and its not able to be used on iPad!

How do I get an app that I paid for transferred over to my iPhone? I paid for it and its not able to be used on iPad!

Assuming you're using the same Apple ID, just download it onto your iPhone.

I am not able to scroll using Magic Mouse in MS Word for Mac 2011 (V14.4.5) on a MacAir with Yosemite? (

As of this morning I am not able to scroll using Magic Mouse in MS Word for Mac 2011 (V14.4.5) on a MacAir with Yosemite (V10.10). It seems to be isolated to MS Word. Any thoughts?

Have tried suggestions from here and elsewhere but scrolling not working for me (in Word only!) on magic mouse or trackpad.
MS Word for Mac 2011 (V14.4.6) with Yosemite (V10.10)

I am not able to signin using apple ID in imassge and face book it says user name or password wrong plz help

I am not able to signin using apple ID in imassge and face book it says user name or password wrong plz help

I think there has been a change in the password requirements for apple ID's. I think it now needs to be eight characters long and have at least one capital letter and one number. Got to appleid.apple.com and then to manage your account and change your password to something that meets the requirements I mentioned and see if that helps

My nightmare started when i upgrade my ipad to ios 7.0.2 i am not able access internet using cellular data, how can i revert to my old ios .

my nightmare started when i upgraded my ipad to ios 7.0.2 i am not able access internet using cellular data, how can i revert to my old ios.wifi is ok , but cellular data is a big prob.can anybody help me ?

Can't downgrade on iOS ...
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
If that doesn't help, tap Settings > General > Reset > Reset All Settings
If that doesn't help, tap Settings > General > Reset > Reset Network Settings

Multibyte users are not able to authenticate using Default Authenticator

Hi,
We are facing an issue with multi-byte user authentication. All chinese and french users are not able to authenticate.
When we try to authenticate with réseau/welcome1, where réseau is a user created in embedded LDAP, authentication fails.
Security log generated is-
####<06-Jan-2009 22:47:49 o'clock PST> <Debug> <SecurityAtn> <jjpeng-lab1> <AdminServer> <[ACTIVE] ExecuteThread: '11' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1231310869374> <BEA-000000> <com.bea.common.security.internal.service.CallbackHandlerWrapper.handle got username from callbacks[0], UserName=rseau>
####<06-Jan-2009 22:47:49 o'clock PST> <Debug> <SecurityAtn> <jjpeng-lab1> <AdminServer> <[ACTIVE] ExecuteThread: '11' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1231310869374> <BEA-000000> <LDAP Atn Login username: rseau>
####<06-Jan-2009 22:47:49 o'clock PST> <Debug> <SecurityAtn> <jjpeng-lab1> <AdminServer> <[ACTIVE] ExecuteThread: '11' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1231310869374> <BEA-000000> <getConnection return conn:LDAPConnection { ldapVersion:2 bindDN:""}>
####<06-Jan-2009 22:47:49 o'clock PST> <Debug> <SecurityAtn> <jjpeng-lab1> <AdminServer> <[ACTIVE] ExecuteThread: '11' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1231310869374> <BEA-000000> <authenticate user:rseau>
####<06-Jan-2009 22:47:49 o'clock PST> <Debug> <SecurityAtn> <jjpeng-lab1> <AdminServer> <[ACTIVE] ExecuteThread: '11' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1231310869374> <BEA-000000> <getDNForUser search("ou=people,ou=myrealm,dc=base_domain", "(&(uid=rseau)(objectclass=person))", base DN & below)>
####<06-Jan-2009 22:47:49 o'clock PST> <Debug> <SecurityAtn> <jjpeng-lab1> <AdminServer> <[ACTIVE] ExecuteThread: '11' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1231310869374> <BEA-000000> <getDNForUser search("ou=people,ou=myrealm,dc=base_domain", "(&(uid=rseau)(objectclass=person))", base DN & below)>
####<06-Jan-2009 22:47:49 o'clock PST> <Debug> <SecurityAtn> <jjpeng-lab1> <AdminServer> <[ACTIVE] ExecuteThread: '11' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1231310869374> <BEA-000000> <returnConnection conn:LDAPConnection { ldapVersion:2 bindDN:""}>
####<06-Jan-2009 22:47:49 o'clock PST> <Debug> <SecurityAtn> <jjpeng-lab1> <AdminServer> <[ACTIVE] ExecuteThread: '11' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1231310869374> <BEA-000000> <[Security:090302]Authentication Failed: User rseau denied>
####<06-Jan-2009 22:47:49 o'clock PST> <Debug> <SecurityAtn> <jjpeng-lab1> <AdminServer> <[ACTIVE] ExecuteThread: '11' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1231310869374> <BEA-000000> <com.bea.common.security.internal.service.LoginModuleWrapper.commit>
####<06-Jan-2009 22:47:49 o'clock PST> <Debug> <SecurityAtn> <jjpeng-lab1> <AdminServer> <[ACTIVE] ExecuteThread: '11' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1231310869374> <BEA-000000> <LDAP Atn Abort>
####<06-Jan-2009 22:47:49 o'clock PST> <Debug> <SecurityAtn> <jjpeng-lab1> <AdminServer> <[ACTIVE] ExecuteThread: '11' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1231310869374> <BEA-000000> <com.bea.common.security.internal.service.LoginModuleWrapper.commit delegated, returning false>
####<06-Jan-2009 22:47:49 o'clock PST> <Debug> <SecurityAtn> <jjpeng-lab1> <AdminServer> <[ACTIVE] ExecuteThread: '11' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1231310869374> <BEA-000000> <weblogic.security.service.internal.WLSJAASLoginServiceImpl$ServiceImpl.authenticate authenticate failed for user rseau>
We are using WebLogic Server 10.3 Default Authenticator as Authentication Provider.
I found few change requests related to multi-byte from the link: http://edocs.bea.com/wls/docs103/issues/known_resolved.html
Am I missing some configuration? Has anyone else tried authenticate multibyte username?
Thanks,
Anuj

Can you provide more information on the use case?
1. Is this using Basic or Form authentication?
2. If the user logs on from a web-based client, do you get the same failure with Internet Explorer as with other browsers?
3. On which operating system is the WebLogic AdminServer running?
With WebLogic Server 10.3, I am able to authenticate with multi-byte (French and Japanese) usernames. (My environment: form auth, Firefox 3.0.5, WLS runs on Linux RHEL 4.0.)

Flash File not Able to Display using ADF Trinidad components..

Hi All,
I am trying to display a flash file using ADF trinidad component for one our project but not able to display when embeded inside the code.
However I am able to directly access the flash file using http://localhost:7101/test/pages/test.swf
The below Object code is included inside the tr:panelHorizontalLayout tag. I also tried using tr:media but doesnt display anything on the browser.
<object classid="clsid:d27cdb6e-ae6d-11cf-96b8-444553540000" codebase="http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=10,0,0,0" width="210" height="230" id="footer_ad1" align="bottom">
<param name="allowScriptAccess" value="sameDomain"/>
<param name="allowFullScreen" value="false"/>
<param name="movie" value="http://localhost:7101/test/pages/test.swf"/>
<param name="quality" value="high"/>
<param name="bgcolor" value="#ffffff"/>
<embed src="http://localhost:7101/test/pages/test.swf" quality="high" bgcolor="#ffffff" width="210" height="230" name="test" align="middle" allowScriptAccess="sameDomain" allowFullScreen="false" type="application/x-shockwave- flash" pluginspage="http://www.adobe.com/go/getflashplayer"/>
</object>-->
Thanks
Chetan

Hi Ramandeep,
I tried that option early but did not work. Not able to understand why.
Below is the code snippet.
<tr:panelGroupLayout layout="vertical">
<tr:panelHorizontalLayout>

<f:verbatim>
<object classid="clsid:d27cdb6e-ae6d-11cf-96b8-444553540000" codebase="http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=10,0,0,0" width="210" height="230" id="footer_ad1" align="bottom">
<param name="allowScriptAccess" value="sameDomain"/>
<param name="allowFullScreen" value="false"/>
<param name="movie" value="http://localhost:7101/test/pages/test.swf"/>
<param name="quality" value="high"/>
<param name="bgcolor" value="#ffffff"/>
<embed src="http://localhost:7101/test/pages/test.swf" quality="high" bgcolor="#ffffff" width="210" height="230" name="test" align="middle" allowScriptAccess="sameDomain" allowFullScreen="false" type="application/x-shockwave- flash" pluginspage="http://www.adobe.com/go/getflashplayer"/>
</object>
</f:verbatim>
</tr:panelHorizontalLayout>
</tr:panelGroupLayout>
And as I mentioned it works fine when I directly access the flash file by using http://localhost:7101/test/pages/test.swf.
Thanks
Chetan

R12 upgrade issue:Not able to login using forms:Please help****urgent

We have recently upgraded our instance from 11.5.9 to 12.0.4 in Windows 2003 server.
We are unable to login to forms after upgrade, however we are able access self service responsibilities without any issues.
We are getting APP-FND-01496 when we access any forms responsibility. We have tried all possible metalink notes with no luck.
Any help to resolve this issue will be appreciated.

Duplicate thread ...
R12 upgrade issue:Not able to login to forms**please help
Re: R12 upgrade issue:Not able to login to forms**please help

PDFs Generated by google analytics are not able to print using Adobe Reader/Pro

HI,
I have fetch the reports from google analytics and tried to print it using adobe reader as well adobe reader pro in mac as well as in windows. Either or it gives me an error "The Document couldnt be printed" and "There were no pages selected to print". Can you please figure it out what is the problem.
Thank You
Dharmit Patel

I tried doing that, but there is no option like that in the adobe version i am using in mac. I am also attaching the images to make it clear, how it looks like. Is there any other way to do it.
Thank you for the reply.

Not able to schedule using KM scheduler

I've created a new project with KM scheduler wizard and deployed the .par file in the client server machine.
The code basically creates a text file.
I scheduled this through portal(System Administration->System Configuration->Knowledge Management->Configuration->Content Management->Global Services->Scheduler Tasks),but file is not getting at the given location in the server at the scheduled time.
When i tried to deploy the same in one of our local portal server machine then the file is getting created.
I'm unable to understand this discrepancy.
What could be the various reasons for the file not getting created.
It is very urgent,quick response will be appreciated and awarded points
Thanks and regards,
Pradeep

Thanks pradeep, the above problem got solved.
I have one more issue,
I want to send mail using KM scheduler.
I'm able to send mail through standlone java application(i.e through command prompt) but when i deploy the same by creating a par file through webdynpro and schedule it through KM scheduler, the program does not send the mail and i get the following error in the default.trc file
"javax.mail.MessagingException: Could not connect to SMTP host: <XXXXXXX>, port: 25;
nested exception is:
java.net.ConnectException: Connection refused: connect#"
what could be reason for this discrepancy,eventhough it is the same program that is being executed
It is really urgent , quick response will be appreciated and points will be awarded.
Regards,
Pradeep

Not able to properly use another photoshop since uploading flash player

Hi everyone, I have been encountering a problem ever since I uploaded the flash player for adobe express. For some reason before I uploaded it so that I could access the website, I was using another online photoshop called www.pixlr.com. However both have different tools needed for my images and I like to use both. However, Since I uploaded the flash player onto my laptop to access the adobe express I have not been able to save my edited images to my computer from pixlr.com. I can edit the images, but it just wont let me save. Any one know what I can do?? I need the clone stamp and the pinch tool, which arent offered by adobe express. Thank you in advance!!
~Chantelle~

Welcome to the account number problem. Each user account has a number, starting with 501, 502 etc. Whereas Setup Assistant uses the first account (say 501) which is the same as the original data disk, later use of Migration Assistant creates a new user account (say 502), so cannot then communicate with the old data.
Here is Pondini's guide to this, with a solution too:
http://pondini.org/OSX/MigrationProblems.html
Pondini RIP

New compute rrunning Windows 7 not able to install using the product code n the box Adobe says product code valid

JUst installing the applications on anew comouter for the first time the new machine rund Widows 7 the old one on XP when I enter the serial numbeer on the product box Adobe says the number is valid I have a new serial number allocated but this does not show up in the list of products allocated to me which are blank. I have not been able to find the new serial number . Anyhelp appreciated

the serial number that worked previously will continue to work (unless you're using a cs2 product).

InfoPackage is generated; NOT able to be use as variant.

Similar Messages

Maybe you are looking for