InfoPackage Load Monitoring failures to email

I need information on how to setup load monitoring to email. I already do this within process chains but need to do it when I am running an initial load without a process chain. Is there settings within the system that can be setup to send an email out to the alert me to these failures so that I am not stuck to watching them in the monitor in BW.
Thank you!
Caroline De Laurell

One last question...
Does SAP have a standard event in this list that will send an email if it passes or fails. Or do I have to have someone create an abap program for that?
Thank you for all your assistance!
I will give you points after the return response.
Thanks!
Caroline

Similar Messages

Error While Monitoring the Infopackage Load(URGENT)

Hi All,
I am monitoring one Process Chain in that one Infopackage load is going on since 1h 45m , i have checked for the short dumps but there is no time out issue and i am checking the job status R/3 side in SM37 but it saying no job matches with this selection criteria.
Can anyone please help me out in this isuue.
Thanks
karuna

Hello,
Check the background job (SM37) by giving one day before in the BW Side. Also goto RSMO -> Detailed tab and check still IDoc is being received and in the Status tab check the waiting time of the job for cancellation.
[Thanks|http://chandranonline.blogspot.com/]
[Chandran|http://chandranonline.blogspot.com/]

What are the best apps to monitor tests and emails on childs phone

what are the best apps to monitor tests and emails on childs phone?

You could simply log into your child's email with the password that the two of you agree upon, and monitor the emails manually. As for the texts, you could purchase a separate device, and use the child's Apple ID to monitor the iMessages. For SMS/MMS, no way to monitor it. You'll have to use the app called 'Random Parental Inspections'.

7.0.2 monitor agent, linux, email

How does the Linux monitor agent perform email notification? Have a complaint that not all events are being emailed, consistently.

Why not use our own GWIA? The destination is internal. Right now, it is going to the (a) GWIA. I can change it, if necessary.
joe a.
Originally Posted by dzanre
Monitor uses it's own SMTP mailer, so where you run into problems sometimes is that some carriers will not accept mail from a server without a PTR, etc. You can use a relay server (but don't use your GWIA) if you need to in order to get this to work - maybe your ISP's SMTP server that would have a PTR - many times Monitor is not on a server that has a public IP address, etc.
Hope that points you in the right direction.

ERROR: No connect due to DbSl Load Lib Failure

Hi Everyone,
I am working on EHP 7 upgrade and currently at Extraction phase of SUM tool. There are numerous issues i have faced and resolved one by one. now i got stuck in this error
      Severe error(s) occurred in phase PREP_INPUT/CONFCHK_IMP!
      Last error code set: Calling 'D:\usr\sap\<SID>\DVEBMGS01\exe/tp' failed
      with return code 249, check D:\usr\sap\<SID>\SUM\abap\log\TOOLOUT.LOG for
      details
Toolout:
iles\Microsoft SQL Server\110\Tools\Binn\;D:\usr\sap\<SID>\SYS\exe\uc\NTAMD64
    ENV: SAPSYSTEMNAME=<SID>
    ENV: dbs_mss_schema=<sid>
    ENV: rsdb_ssfs_connect=0
EXECUTING D:\usr\sap\RES\DVEBMGS01\exe\tp.EXE "pf=D:\usr\sap\<SID>\SUM\abap\var\DEFAULT.TPP" getdbinfo SID
TRACE-INFO: 1: [     dev trc,00000] Mon Aug 11 20:14:06 2014                                                       104676 0.104676
TRACE-INFO: 2: [     dev trc,00000] DlLoadLib success: LoadLibrary("dbmssslib.dll"), hdl 0, count 1, addr 00007FFABDAD0000
TRACE-INFO: 3:                                                                                                            7 0.104683
TRACE-INFO: 4: [     dev trc,00000]      using "D:\usr\sap\<sid>\DVEBMGS01\exe\dbmssslib.dll"                              7 0.104690
ERROR: No connect due to DbSl Load Lib Failure
ERROR: Possible reasons are:
ERROR: - The value set for dbms_type ('mss') is invalid.
ERROR: - Cannot find the DLL dbmssslib.dll in path
ERROR: - problems when loading DB-dependent DLLs
ERROR: Connect to <SID>failed (20140811201406).
SAPup> Process with PID 3224 terminated with status 249 at 20140811201406!
R3trans -d returns following error (note: everything is normal at MMC and i am able to login SAP asusuall)
This is r3trans version 6.24 (release 741 - 10.06.14 - 20:14:07).
unicode enabled version
2EETW169 no connect possible: "connect failed with DBLI_RC_LOAD_LIB_FAILED."
r3trans finished (0012).
i have checked/ tried the following things but did not help
1. dbms_type is correct and check other parametrs aswell
2. downloaded latest dbmssslib.dll and tried replacing but did not help
3.replaced r3trans and TP with new patch level
4.checked scn for similar posts
please help me resolve this issue
thanks,
Shiv

getting following error now
Checks after phase PREP_IMPORT/TOOLIMP_TOOLDEL_PRE were negative!
Last error code set: Detected 1 aborted activities in 'PHASES.ELG'<br/> Calling 'D:\usr\sap\<sid>\DVEBMGS01\exe/tp' failed with return code 12, check D:\usr\sap\<sid>\SUM\abap\log\SAPup.ECO for details
ERROR: Detected the following errors:
# D:\usr\sap\<sid>\SUM\abap\log\LM1I000099.<sid>: 4 ETW000 > parallel 3 4 ETW000 > 4 ETW000 > excluding 'R3TRDDDD','R3TRDOMA','R3TRDTEL','R3TRENQU','R3TRMACO','R3TRMCID','R3TRMCOB','R3TRSHLP','R3TRSQLT','R3TRTABL','R3TRTTYP','R3TRUENO','R3TRVIEW' 4 ETW000 R3trans was called as follows: D:\usr\sap\<sid>\DVEBMGS01\exe\R3trans.exe -u 26 -w D:\usr\sap\<sid>\SUM\abap\tmp\LM1I000099.<sid> D:\usr\sap\<sid>\SUM\abap\tmp\LM1KK000099.<sid> 4 ETW000 active unconditional modes: 26 2EETW169 no connect possible: "connect failed with DBLI_RC_LOAD_LIB_FAILED."
thanks,
Shhiv

No connect due to DbSl Load Lib Failure - During upgrade

Hi,
I am in the middle of performing PREPARE on a ECC 5.0 system to upgrade to ECC 6.0. During the phase PR_DBPAR the following error is coming:
SAPup> Starting subprocess 15413368 at 20080525190758
ENV <0x1105f2e90>: ORACLE_PSRV=DR5
ENV <0x1105f2ed0>: PATH=/oracle/DR5/102_64/bin:.:/home/dr5adm:/usr/sap/DR5/SYS/e
xe/runU:/usr/sap/DR5/SYS/exe/run:/usr/bin:/etc:/usr/sbin:/usr/ucb:/usr/bin/X11:/
sbin:/usr/java14_64/jre/bin:/usr/java14_64/bin
ENV <0x1105f3070>: NLS_LANG=AMERICAN_AMERICA.UTF8
ENV <0x1105f30d0>: ORACLE_BASE=/oracle
ENV <0x1105f3290>: dbs_ora_tnsname=DR5
ENV <0x1105f32d0>: ORACLE_SID=DR5
ENV <0x1105f34b0>: DIR_LIBRARY=/usr/sap/put/exe
ENV <0x1105f3670>: dbs_ora_schema=SAPDR2
ENV <0x1105f3830>: ORA_NLS33=/oracle/client/9208/ocommon/nls/admin/data
ENV <0x1105f3990>: ORACLE_HOME=/oracle/DR5/102_64
ENV <0x1105f3a70>: dbms_type=ORA
ENV <0x1105f3c30>: LIBPATH=/usr/sap/put/exe:/usr/sap/DR5/SYS/exe/run
ENV <0x1105f3d50>: auth_shadow_upgrade=0
EXECUTING /usr/sap/put/exe/tp (tp) pf=/usr/sap/put/bin/DEFAULT.TPP execdbscript
DR5 -x SQLDBSCRIPT.TQL
This is /usr/sap/put/exe/tp version 372.04.08 (release 700, unicode enabled)
ERROR: No connect due to DbSl Load Lib Failure
ERROR: The values set for DIR_LIBRARY ('/usr/sap/put/exe') or dbms_type ('ORA')
ERROR: Connect to DR5 failed (20080525190759).
Warning: Parameter INTERRUPT is no longer used.
Warning: Parameter DAYLIGHT_SHUTDOWN is no longer used.
Warning: Parameter WITH_TACOB is no longer used.
Warning: Parameter IMPDP_BY_EVENT is no longer used.
Warning: Parameter INTERRUPT is no longer used.
Warning: Parameter DAYLIGHT_SHUTDOWN is no longer used.
Warning: Parameter WITH_TACOB is no longer used.
Warning: Parameter IMPDP_BY_EVENT is no longer used.
Warning: Parameter DBCONFPATH is no longer used.
Warning: Parameter STARTDB is no longer used.
Warning: Parameter STOPDB is no longer used.
TRACE-INFO: 1: [dev trc     ,00000] Sun May 25 19:07:59 2008
                   4777 0.004777
TRACE-INFO: 2: [dlux.c      ,00000] *** ERROR => DlLoadLib: dlopen()=
0509-130 Symbol resolution failed for /usr/sap/put/exe/dboraslib.o because:
TRACE-INFO: 3:                          0509-136   Symbol OCIClientVersion (numb
er 130) is not exported from
TRACE-INFO: 4:                                     dependent module /usr/sap/DR5
/SYS/exe/run/libclntsh.a[shr.o].
TRACE-INFO: 5:                          0509-022 Cannot load module /usr/sap/put
/exe/dboraslib.o.
TRACE-INFO: 6:                          0509-026 System error: Cannot run a file
that does not have a valid format.
TRACE-INFO: 7:                          0509-192 Examine .loader section symbols
with the             58 0.004835
TRACE-INFO: 8:                                   'dump -Tv' command. -> DLENOACC
ESS (8,Exec format error)
tp returncode summary:
TOOLS: Highest return code of single steps was: 0
ERRORS: Highest tp internal error was: 0249
tp finished with return code: 249
meaning:
connect failed due to DbSL load lib failure
Process with ID 15413368 terminated with status 249
We are having oracle 10g on AIX 5.3.
I tried options like setting LIBPATH with /oracle/client/10x_64/instantclient (instead of the default /oracle/client/9208/lib) along with /usr/sap/DR5/SYS/exe/run and having LIBPATH only with /usr/sap/DR5/SYS/exe/run and having env variable DBS_LIBPATH_EXT=/oracle/client/10x_64/instantclient (as per note 836517)
but if i try to restart PREPARE again, it is picking up the changes happening in LIBPATH (but same error) and also it not picking up DBS_LIBPATH_EXT env variable at all (may be if i try to make it permanent using .sh file it will pick up but i dont want that)
With all the above said, anyone has any perfect idea to have this issue fixed and continue the prepare process ?
Thanks,
Murali.

Hi Markus,
Thanks for your reply. The issue is as follows:
If i keep the current default value of the env variable LIBPATH which is
LIBPATH=/usr/lib:/lib:/usr/sap/DR5/SYS/exe/run:/usr/sap/DR5/SYS/exe/runU:/oracle
/client/9208/lib
and being in /usr/sap/SID/SYS/exe/run (which is 6.40 kernel ECC 5.0) if i execute
ldd dboraslib.o the following is the output:
dboraslib.o needs:
         /usr/sap/DR5/SYS/exe/run/libsapu16.so
         /usr/sap/DR5/SYS/exe/run/libclntsh.a(shr.o)
         /oracle/client/9208/lib/libwtc9.so
         /usr/lib/libc.a(shr_64.o)
         /usr/lib/libpthreads.a(shr_xpg5_64.o)
         /usr/lib/libdl.a(shr_64.o)
         /usr/lib/libodm.a(shr_64.o)
         /usr/lib/libc.a(aio_64.o)
         /unix
         /usr/lib/libcrypt.a(shr_64.o)
being in /usr/sap/put/exe (which is in the middle of PREPARE step for ECC 6.0 upgrade, so it put kernel 7.0 files), the following is the output:
dboraslib.o needs:
         /usr/lib/libc.a(shr_64.o)
         /usr/sap/DR5/SYS/exe/run/libclntsh.a(shr.o)
         /unix
         /usr/lib/libcrypt.a(shr_64.o)
         /usr/lib/libpthreads.a(shr_xpg5_64.o)
         /usr/lib/libdl.a(shr_64.o)
         /usr/lib/libodm.a(shr_64.o)
         /usr/lib/libc.a(aio_64.o)
But if i change the environment variable for LIBPATH as follows:
LIBPATH=/oracle/client/10x_64/instantclient:/usr/lib:/lib:/usr/sap/DR5/SYS/exe/run:
/usr/sap/DR5/SYS/exe/runU (since we have already installed oracle 10g which is up and running and so we have already installed instant client also during that process)
the following is what the output for both the path as mentioned earlier:
#[/usr/sap/put/exe]
#dr5adm@sapdr5-3d[DR5]> ldd dboraslib.o
dboraslib.o needs:
         /usr/lib/libc.a(shr_64.o)
         /oracle/client/10x_64/instantclient/libclntsh.a(shr.o)
         /unix
         /usr/lib/libcrypt.a(shr_64.o)
         /usr/lib/libpthreads.a(shr_xpg5_64.o)
         /usr/lib/libdl.a(shr_64.o)
         /usr/lib/libodm.a(shr_64.o)
         /usr/lib/libperfstat.a(shr_64.o)
         /usr/lib/libcfg.a(shr_64.o)
         /usr/lib/liblvm.a(shr_64.o)
#[/usr/sap/DR5/SYS/exe/run]
#dr5adm@sapdr5-3d[DR5]> ldd dboraslib.o
dboraslib.o needs:
         /usr/sap/DR5/SYS/exe/run/libsapu16.so
         /oracle/client/10x_64/instantclient/libclntsh.a(shr.o)
         /oracle/client/92x_64/lib/libwtc9.so
         /usr/lib/libc.a(shr_64.o)
         /usr/lib/libpthreads.a(shr_xpg5_64.o)
         /usr/lib/libdl.a(shr_64.o)
         /usr/lib/libodm.a(shr_64.o)
         /usr/lib/libperfstat.a(shr_64.o)
         /usr/lib/libc.a(aio_64.o)
         /unix
         /usr/lib/libcrypt.a(shr_64.o)
         /usr/lib/libcfg.a(shr_64.o)
         /usr/lib/liblvm.a(shr_64.o)
DIR_LIBRARY on both the cases and by default also is /usr/sap/SID/SYS/exe/run (pointing to running 6.40 kernel)
But if i try the PREPARE with or without this changes, the issue what i reported is what happening. Let me know your ideas on this.
Thanks,
Murali.

Load monitoring issue

Hi,
in load monitoring process chain having issue with 1 master data load, this issue containg "Error message when processing in the Business Warehouse" and in monitor 2 duplicate records are there, how can i solve the issue and continue the process chain, could you plz anyone sugess me in resolving the issue.
Thanks!
regards,
Buvana.

hii bhuvana,
there is one option which u can try but am not sure if it is correct or not. go to DTP from there go to update tab and there u can see a option called "Handle duplicare record key" check that option. It should work. In the past when we had the similar error of duplicate records. we did it in the same way.
regards,
raghu.

TP return code 0249 / No connect due to DbSl Load Lib Failure

Hi,
When I try to release a Transport in Transaction - SE01, we are
encountering the following error and the task gets released but the
Transport doesn't get released. Please find the error message below:
Test call of transport control program (tp) ended with return code 0249
Message no. TK094
Diagnosis
Your transport request could not be exported, since all requirements were not fulfilled.
Calling the transport control program tp
"tp EXPCHK RDDK123345 pf=C:\usr\sap\trans\bin\TP_DOMAIN_R3D.PFL
-Dtransdir=C:\usr\sa"
which checks the export requirements, returned the following
information:
Return code from tp: 0249
Error text from tp: ERROR: No connect due to DbSl Load Lib Failure
System response
Further processing is terminated.
Procedure
Check the following points:
o Feasibility of the transport control program tp
o Parameter settings in the transport profile
o Availability of the transport directory and the subdirectories
(cofiles, data, log, sapnames, bin)
o Write authorization for the subdirectories
o Write authorization for the files of the subdirectories cofiles,
data, log, sapnames
Release the request again when the error has been removed
Appreciate any help to resolve this error.
Thanks,
Rajesh

Hi!
I have the same issue, but the windows enviroment variable has been set or should the parameter be set in the instance profile?
Thanks!
rollo
//solved
It was an issue with the RFC's and some mising services in the service file
Edited by: rollo on Jan 12, 2009 2:40 PM

TP error: connect failed due to DbSL load lib failure

Hi All,
I have prepared Quality system from Production system as System copy.I have upgarded Kernel from 620 to 640 in Quality system.
After Kernel upgrade , Server details are as below
Operating System : windows 2003 IA 64
Database : SQL server 2000 IA 64
Kernel :640 and compiled for 64 bit non unicode system ,
patch number is 43.
SAP : SAP R/3 4.7
Before kernel upgrade , server details are as below
Operating System : windows 2000 server
Database : SQL server 2000
Kernel :620 and compiled for Non unicode system ,patch number
is 1363
SAP : SAP R/3 4.7
I am able to transport request from Development to Quality . But when I try to import request from Quality I am getting error message "Connect failed due to DBSL Load lib failure"
Error message is " connect failed due to DBSL load lib failure
cannot find the DLL dbmssslib.dll in path( K:\usr\sap\NBQ\SYS\exe\run)
problem when loading DB-dependent DLLs."
I have set Environmnet variable ( DBMS_TYPE value as mss) for nbqadm user.
I have seen that dbmssslib.dll file is exist in exe/run path.
Does anyone having an Idea , how to resolve this issue.Pls help me
Thanks in advance
Regards
Venu

Hi ,
Thanks for all
Issue is resolved by myself.
Instead of update Kernel to 640 , I have downloaded latest 620 kernel patch on IA 64 .
Since my production server is running on x86 and 620 kernel , i have downloaded 620 kernel for IA 64 .
That resolved my issue.
Regards
Sai

DVD - failed to load monitor driver

Built 4 MSI systems using KN9neo motherboards and barton and pheno 1 processors - zero problems
Just built another system with phenom 2 processor and MSI NF750-G55 (MS-7578) motherboard
running XP fully patched
Everything works except the auto run on the lite-on cd/dvd writer
When i first booted xp with no graphics driver, the MSI drivers disk auto ran fine and I installed all the drivers
Now I can see the files on the utility disk but it wont auto run (or run the setup.exe file)
error is - 'failed to load monitor driver'
When I put the drivers disk in my phenom 1 machine it auto runs fine
I see the device manager shows 2 vga entries for dual screen use no doubt
Any ideas please - you might say why are you worried as all the drivers are on your machine - but i wonder if other dvd's might not auto run.
cd's auto run fine in the drive - its just the drivers DVD disk that will not auto run ...
I tried swapping the optical drive with my other machine which will auto run the disk, but it had the same problem - so the optical drive is ok but there is some incompatibility ?
Should on chip vga be enabled in BIOS - tried it on and off - no diff
thanks
alan

Quote from: Fredrik on 30-October-09, 06:09:07
Enter Device Manager and have a look at top of the list for 'Monitors', and then 'Graphics cards'. Don't know the titles in your lingua.
There seems to be something fishy with the drivers. I would restart the driver installation process, by uninstalling them. Don't think you are tempted to do so.
PSU too, please.
graphics card looks good and tried to update it via internet - it says present driver is ok
These two monitors showing are something I have never come across - they both say 'default monitor'
Yes i think i will acronis what i have and take the drivers out and reinstall
Two default monitors are weird or is it me that out of date as to how phenom 2's and fancy motherboards work... i will try it and report back !
thanks
alan

HT4993 Replaced my iphone 5 with new one because my first one the volume buttons stopped working. Now my contact list is all wrong. It's correct on my I pad but don't know how to correct it on my phone. And my email is loading hundreds of old emails,?

Replaced my iphone 5 with new one because my first one the volume buttons stopped working. Now my contact list is all wrong. It's correct on my I pad but don't know how to correct it on my phone. And my email is loading hundreds of old emails,?

If the iPod is defective and not abused Apple will exchange it at no cost under your warranty.
Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

Load monitoring (bw) issue

Hi friends,
               iam in support project load monitoring(pc), i have 1 delta load(transaction data) in support system,this load fail due to special char, i copied that special char and executed in RSKC transaction after this, i delete the (red) request without changing the QM status and   i selected Repeat Delta in Rsa7 and sheduled the info package, after clicking START button, it is showing msg like
(Last delta update is not yet completed therefore, no new delta update is possible, you can start the request again , if the last delta req is Red or Green in the Monitor.).
And i tried to reconstruct the cube by selecting the Req and clicked on Reconstruct/insert, it is showing
Req not marked as correct,this Req can not be used for Reconstruction.
load is going from data source to psa and target, but in psa there is no req found.
can anyone plz help me what can i do now.
thanks and regards
Buvana Sai.

Hi Hemanth, thanks for ur reply,
                                                i already delete the request without changing QM status in target, may i know where can i get tha Req again? and i tried to change the QM status by using Reconstruction Req (Tab)
by clicking here the monitor option, ofcorse its gone to monitor screen, that status tab is showing already Red because of issue. and i doubleclicked this red status but it is comming like this
If you set a 'red' delta upload to green,
with the next request, BW sends a delta request
to the source system and this delivers the next delta data.
The data from the 'red' delta load is then no longer available
(even with a repeat). This can lead to loss of data.
Do you want to execute a QM Action?
continue----
or cancel   it is asking
what need to do now can u plz give me the solution for this
thanks and regards
jyothi.

Common issues in data load monitoring...

Hi all,
Can u please tell me what are the common issues that occur during data load monitoring and how to rectify them??

This is a bit dependent on your system and landscape. but to mention some of issues:
- Deadlock in cube because the inxedes were not dropped before loading data into cube
- Unallowed signs in master data prevent system from creating SID
- Duplicate values in master data load (can be avoided by setting a flag in DTP)
- Loading delta package without having intitialized before
- Source package delivers key figure without units (this happens when laoding into a cube or an DSO with SID generation)
- Missing replication of data source after transporting data source in source system
Regards
Aban

Assistance Needed on Data Load Monitoring

presently i'm working in a support proj which is data load monitoring ( mainly process chains) , As a result of which i will the responsible person to fix some of the loads when it fails eg : Duplicate records, errorneous records, attrbutute chain run etc .
As a fresher in BW i need to learn some of the things like Types of updates, process types & process chains proficiently thick & fast , i request you to please send in some PDF's or ppt regarding the same , if any books are there then please suggest one.
i Need mainly regarding
Dataflow & update Types Briefly .
process Types , chains
Delta mechanism .
Hope you will bail me out of this situation.
Thanks in Advance ,
HP

Here are all the links:
sap document on process chains:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/8da0cd90-0201-0010-2d9a-abab69f10045
help.sap.com link for creation of process chains:
http://help.sap.com/saphelp_nw04/helpdata/en/67/13843b74f7be0fe10000000a114084/frameset.htm
helpful threads on issues related to process chains:
Process Chains creation and monitoring
Process Chain
Re: OPEN HUB with Process Chain
http://help.sap.com/saphelp_nw04/helpdata/en/67/13843b74f7be0fe10000000a114084/frameset.htm
Re: OPEN HUB with Process Chain
https://forums.sdn.sap.com/click.jspa?searchID=6646868&messageID=3806122
Re: attribute change run
https://forums.sdn.sap.com/click.jspa?searchID=6646868&messageID=3790051
Re: Process Chain Scheduling
https://forums.sdn.sap.com/click.jspa?searchID=6646868&messageID=4426820
Re: Process Chain
https://forums.sdn.sap.com/click.jspa?searchID=6646868&messageID=3692343
Re: Process Chain
https://forums.sdn.sap.com/click.jspa?searchID=6646868&messageID=3841608
Re: Can a process can have more than one variant?
https://forums.sdn.sap.com/click.jspa?searchID=6646868&messageID=3855067
Re: about the open hub...!
https://forums.sdn.sap.com/click.jspa?searchID=6646868&messageID=3700389
Re: Process chain statistics
https://forums.sdn.sap.com/click.jspa?searchID=6646868&messageID=4162319
Re: Process Types in BI 7.0
https://forums.sdn.sap.com/click.jspa?searchID=6646868&messageID=3759916
Re: How to deactivate the local chain in Main chain
https://forums.sdn.sap.com/click.jspa?searchID=6646868&messageID=3591699
Re: changing a process type during running of process chain
https://forums.sdn.sap.com/click.jspa?searchID=6646868&messageID=3750639
Re: Node for Process chain--Urgent
https://forums.sdn.sap.com/click.jspa?searchID=6646868&messageID=3692720
Re: Process Chains Events
https://forums.sdn.sap.com/click.jspa?searchID=6646868&messageID=3707415
Re: process chain event trigger problem
https://forums.sdn.sap.com/click.jspa?searchID=6646868&messageID=4374184
Thanks.,...
Shambhu

Data Load Monitoring.

Dear Experts,
I would like to know on what circumstances we should use following Data load monitoring tools:
1.     RSMO
2.     SSA/BWT
3.     ST13
4.     RZ20
It would be more helpfull if you can describe pros and cons of each tool.
Regards
Vivek Tripathi

Hi Vivek,
RSMO is used to monitor the dataloads coming into the BI system. Here you can find the details for each and Every load happened.
SSA/BWT is a Program which provide you the details about Process Chain Analysis, Detailed Request Analysis ,Aggregate Toolset etc.
Refer this Wiki for more details.
https://www.sdn.sap.com/irj/scn/wiki?path=/display/bi/bw%252btools
ST13- This provides a set of tools which talk mostly about Performance of the BI system.
Refer this Blog
Overview important BI performance transactions
Regarding RZ20 - It is called as CCMS Monitor Sets
Here in CCMS you have different monitoring tools for different components.
If BI is concerned you can monitor the details about BI Accelerator Monitor,BI Key Performance Indicators ,BI Monitor etc.
Regards
Karthik

InfoPackage Load Monitoring failures to email

Similar Messages

Maybe you are looking for