Infopackage Loading error - The file is not open

Hi Experts,
I have an issue in my process chain. When the loading starts from deleting the psa contents then the infopackages - this is where the error starts. Infopackage source is 'Load Text-Type File from Application Server'. The error only says:
- Errors in source system
- The file 'path and filename.csv' is not open
There are 10 infopackages to load and they're getting the files from AL11. I had successful run of the process chain before, but now it's always an error. Manual loading of the infopackages is fine, but once they ran in the process chain - always an error. Anyone encountered this type of issue? Can't seem to figure out what the cause is.
Thanks in advance!
-jay

Hi,
I have sometimes an error when I'm loading from frontend
=> the file is open in notepad or ms excel.
Have you the same on the application server?
=> Ask your admin to check this.
Or, have you now an other filename? UNIX server?
=> check upper and lower case.
Do you see the file in AL11. Can you open it there?
Sven

Similar Messages

Has anyone had the error "The file could not be read due to an error" when selecting ignore or replace image links. The linked images are in Dropbox if that helps.

I am working on a Mac 10.9.5 with Adobe CS6. My files are locally in Dropbox but once we moved files to network and tried opening the AI - the file would not recognize the original folder location. I tried ignoring the missing images but then I receive the error - The file could not be read due to an error." The same error happens when I try replacing the first missing image. I know the problem lies in the images are linked back to my Dropbox but the AI file doesn't care since it won't let me replace or ignore the image links.

Jasion,
Maybe a bit beside the question, but it is always recommended here to open/save from/to own hard disk, and to copy from/to networks and removable media. You may be lucky, at least for a while, but it is better to be safe than sorry.
In addition to the (far greater) risk of file corruption, some issues are mentioned here:
http://helpx.adobe.com/illustrator/kb/illustrator-support-networks-removable-media.html

Has anyone had the error "The file could not be read due to an error" when selecting ignore or replace? The linked images are in Dropbox if that helps.

I am working on a Mac 10.9.5 with Adobe CS6. My files are locally in Dropbox but once we moved files to network and tried opening the AI - the file would not recognize the original folder location. I tried ignoring the missing images but then I receive the error - The file could not be read due to an error." The same error happens when I try replacing the first missing image. I know the problem lies in the images are linked back to my Dropbox but the AI file doesn't care since it won't let me replace or ignore the image links.

Jasion,
Maybe a bit beside the question, but it is always recommended here to open/save from/to own hard disk, and to copy from/to networks and removable media. You may be lucky, at least for a while, but it is better to be safe than sorry.
In addition to the (far greater) risk of file corruption, some issues are mentioned here:
http://helpx.adobe.com/illustrator/kb/illustrator-support-networks-removable-media.html

Unable to add picture to Indesign file: error the file is already open.

I am hoping that someone may have an answer for my question as I can't seem to find a solution anywhere else.
The Setup:
We have a primarly windows network with windows servers and network shares. (Yes all the shares are NTFS formated)
We have six Desktop MACs OS X 10.5.4 added to this network and the MACs have loaded on them the complete Adobe CS4 suite.
The problem:
The issue happens when one of our users is attempting to drop a PSD file into an opened Indesign file.
They user opens the Indesign file first from the network share in folder1, the user the goes to folder2 and attempts to drag and drop a PSD into the Indesign file they get the error the file is already open.
So my first question what would be the most likly cause of this error?
Second question is we also have a program called AdmitMac loaded on the MACs for authenication with the servers.
Could this be interfering in anyway? AdmitMac uses Kerberos authenication, do the Adobe program recognise this Authenication type?

grmg,
There is nothing wrong with the ID file or the PSD file. If the user moves both files to their desktop the drag-n-drop function works just fine.
Even if just one of the files is on the desktop and the other on the network the drag-n-drop works fine.
The issue is when both files are on the network server, that is when we get the error.
Also it doesn't seem to matter what the file type is, the same thing occurs, if both files are on the Windows Server we get the "File already open" error
The Artist just need to make links in ID to the picture files until the final revision.
(We would perfer to keep the files on the server for backup purposes. In the past we have had one to many contractors come in to do work and they do everything on the desktop and when they leave they sometimes delete their desktop. As such the files never gets backed up.)
I need to know what tweak, change or update I can apply so that both files can be on the server and the Drag-n-Drop function still works.
thanks for the reply.

When I click PDF file, the file does not open and installation software for creative suite automatically begin to start. Even after re-installation of creative suite 5.5, only acrobat reader dose not work and the same phenomena occurs.

When I click PDF file, the file does not open and installation software for creative suite automatically begin to start. Even after re-installation of creative suite 5.5, only acrobat reader dose not work and the same phenomena occurs.

Did you ever install Acrobat? It is not installed automatically with CS, but requires an extra installation step.

How I put photos / images at facebook page? The files do not open.

How I put photos / images at facebook page? The files do not open.

The crash happens on setting up the audio hardware. Either you have a broken driver or your preferences is damaged. You can try deleting the MainStage preferences.

Error "The file could not be written"

Hi!
'm tyring to export some pictures in lightroon but I receive the error "The file could not be written".
Any suggestion?
Thanks

Make sure you have permission to write to the output folder and that there is enough space on the disk.
What OS are you running? What version of Lightroom?
Hal

Bulk Insert Task Cannot bulk load because the file could not be opened.operating system error error code 3(The system cannot find the path specified.)

Following error i am getting after i chnaged the Path in Config File from
\\vs01\d$\\Deployment\Files\temp.txt
to
C:\Deployment\Files\temp.txt
[Bulk Insert Task] Error: An error occurred with the following error message: "Cannot bulk load because the file "C:\Deployment\Files\temp.txt" could not be opened. Operating system error code 3(The system cannot find the path specified.).".

I think i know whats going on. The Bulk Insert task runs by executing sql command (bulk insert) internally from the target sql server to load the file. This means that the SQL Server Agent of the target sql server should have permissions on the file you trying to load. This also means that you need to use UNC path instead to specify the file path (if the target server in on different machine)
Also from BOL (see section Usage Considerations - last bullet point)
http://msdn.microsoft.com/en-us/library/ms141239.aspx
* Only members of the sysadmin fixed server role can run a package that contains a Bulk Insert task.
Make sure you take care of this as well.
HTH
~Mukti
Mukti

CS4 unable to place image ERROR: The file is not readable

Hi All,
I have been experiencing big issues with Illustrator CS4 and placing images into a document.
Basically I will be working on say a packaging project and after about the 4th image being placed I will get the error message The file is not readable I select OK (the only option available)
RESULT: no file placed no where to go?
I then have to save the document, close Illustrator, re-open, open the document and then the image will usually place (not always first time though and sometimes I will have to reboot the whole system!) but then the 5th, 6th, 7th image after that I have to follow the same procedure!... The image files are fine, 300ppi, 20-30MB max, PSD, TIFF, JPG dose not matter all follow the same issue... but eventually after a lot of rebooting and loading the so called un-readable files will go into the document.
Also the image will place sometimes but the same error message will appear on attempting to embed the image!
All very annoying and massively time consuming!!!
To top it off since the above, random AI files when loading up will crash Illustrator out... again after a reboot the same file will open fine with no problems???
My system:
OS: Windows 7 Ultimate (64bit)
Processor: Intel Core i7 CPU 920 @ 2.67GHz (quad core)
RAM: 6GB
GRAPHICS: NVIDIA Quadro FX 570 (3GB) (Dual monitor)
DVD/CDR
PRIMARY: ATA 500MB
SECONDARY: ATA 1Tb
Im desperate to get this sorted... other wise its back to my old system... slow but reliable!!
Many Thanks!!

Well, I just encountered the same issue using Illustrator CS5...getting the "The File Is Not Readable" error message...first time that's happened in the 14 years of using the program. It seems the file size was too large for Illustrator (or one of my computers) to handle. So I opened the file using one of my other computers and deleted the unused layers to reduce the file size. Originally, there were 6 layers with 3 different versions of the artwork and what I ended up having to do is create 3 separate files rather than having it all in 1.
Hope this helps!

Lightroom 5.6 Error: The file could not be edited because Photoshop CC could not be launched...

I upgraded to lightroom 5.6 recently and i am using photoshop cs 6.
My OS is windows 8 on i5 4670 with R280X gfx card 16gb ram
After editing a photo with lightroom , when I right click to edit in photoshop, immediately photoshop launch but the image isnt imported to photoshop.
After like 30sec an error message pop out saying "The file could not be edited because Photoshop CC could not be launched".
After another 10sec then the photo appear in photoshop... this is getting irritating to me.
if i select to just open the original or a copy of the original it works fine. It only happens when I try to open it with lightroom changes.
I had uninstall/reinstall both photoshop and lightroom as well as remove all the plugins i had, but the problem doesnt go away.
Another issue with lightroom 5.6 is the the adjustment brush is slow and sluggish, it is so unusable when I zoom in to use the adjustment brush.
I didnt had that issue before i upgraded. OMG
anyone have solution to my problem ?

I upgraded to the latest version of ps cc 2014 , problem resolved.
look like cs6 i outdated or something

Infopath 2013 SOAP Web Service Data Connection - Error: The file is not a valid XML file

Here are the steps to replicate the issue I’m having when adding lists.asmx or any other SharePoint web service in InfoPath 2013. This web service opens fine in the browser from my desktop. My account is a farm administrator and is added to the
web application’s User Policy. I can use these services just fine using Nintex 2013 Workflow.
Open InfoPath Designer 2013.
Select Blank Form and click Design Form button.
Click “Data” tab.
Click “From Web Service” and select “From SOAP Web Service”
Enter https://mysiteurl.com/_vti_bin/lists.asmx?WSDL for the web service definition.
Click Next.
Windows Security window pops up.
Enter a credential. I tried both my account and the farm account. My account is a farm admin and is added to the web application’s User Policy with Full Control.
Click OK. It prompts for credential multiple times.
I get below this error messages:
Sorry, we couldn't open https://mysiteurl.com/_vti_bin/lists.asmx?WSDL
InfoPath cannot find or cannot access the specified Web Service description.
The file is not a valid XML file.
Not enough storage is available to process this command.
We have a project that is in need of these services using InfoPath so any help is greatly appreciated.

Hi Brian_TX,
For your issue, try to the following methods:
Change your service binding in web.config to:binding="basicHttpBinding". It seems in VS it defaults to wsHttpBinding.
Replace all instances of "parameters" from the web service wsdl with the name "parameter"
There are some similar articles about the issue, you can have a look at them:
http://www.infopathdev.com/forums/t/23239.aspx
https://social.msdn.microsoft.com/Forums/office/en-US/621929c3-0335-40af-8332-5a0b430901ab/problems-with-infopath-web-service-connection?forum=sharepointcustomizationprevious
https://social.msdn.microsoft.com/Forums/en-US/5fa5eca8-f8d7-4a2e-81ba-a3b4bdcfe5af/infopath-cannot-find-or-cannot-access-the-specified-web-service-description?forum=sharepointcustomizationlegacy
Best Regards
Lisa Chen
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]

Lightroom 5.2 Error: The file could not be edited because Photoshop CC could not be launched...

When I am using Lightroom 5.2, and I try to edit a file in Adobe Photoshop CC from Lightroom, Photoshop starts up and after 15 to 20 seconds, I receive the following error message: "The file could not be edited because Adobe Photoshop CC could not be launched." If I click "OK" on the error message form, the image finally opens in Photoshop.
I've uninstalled and reinstalled Lightroom 5.2 and Photoshop CC multiple times, but the edit in Photoshop problem won't go away.
Has anyone else experienced this problem? Any suggestions on how to fix this issue?
Thanks,
Mark

I am having the same problem in lightroom 5 on a mac (Mavericks). I'm wondering if it's because I have both Photoshop CS5 and Photoshop CC and somehow they are conflicting, but I don't see how. I clearly have Photoshop CC as the primary external editor.
Last night, after seeing this post, and ekupp's response, I uninstalled Photoshop CC and reinstalled it via the creative cloud and that fixed it, but today it's doing the same thing again. When I choose to edit in photoshop CC, Photoshop CC opens but I still get the error in lightroom. If Photoshop CC is already open, I still get the error. I refuse to keep uninstalling/reinstalling it... I can't lose Photoshop CS5 as I use it for designing (I like the view in mini bridge better), but I like CC for editing.
This is creating a secondary problem for me as I am ending up with a bazillion (OK, maybe 5) psd copies of the raw files that I want to edit. When I get the error, Lightroom proceeds to render the files. I really want to turn that function off because as of now I have to try to click the microscopic "x" for each file as it "prepares to edit" and that's tedious and is creating extra files I don't want.
Last thing, since I'm here and hopeful to get an answer... I have a Mac, as I stated and I like my spaces. However, when the "edit in photoshop" function works spaces continues to force me to the photoshop space. No multitasking allowed as my files are opened. I think this is a lightroom or photoshop quirk, as when I run actions I am able to go to a different space (safari or lightroom) to work as it works for me.

When I try to open large files that i have created (1.2 gb to 1.5 gb) the ram usage for Photoshop climbs to 4 gb and the file will not open.

I am using PS 12.1 x64 on a Windows 7 64 bit pc.when I try to open large files that i have created (1.2 gb to 1.5 gb) the ram usage for Photoshop climbs to 4 gb and the file will not open

Machine specs, please. Totallinstalled RAM, scratch disk space, etc
BOILERPLATE TEXT:
If you give complete and detailed information about your setup and the issue at hand, such as your platform (Mac or Win), exact versions of your OS, of Photoshop and of Bridge, machine specs, what troubleshooting steps you have taken so far, what error message(s) you receive, if having issues opening raw files also the exact camera make and model that generated them, etc., someone may be able to help you.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

Help! Getting error "The file could not be written" when exporting

When I attempt to export a group of approximately 50 photos from LR4, a window opens at the end of the process saying "The file could not be written" along with a list of approximately 10-15 NEF file names. I have never had a problem exporting before, but I recently started storing my LR catalog and files on an external USB 3.0 drive. I'm looking for any suggestions!
Here are the details:
LR4 with latest updates
Win 7 with latest updates
LR catalog and photo files stored on external USB 3.0 G: drive
Trying to export to a folder on my desktop on C: drive (46GB free out of 134GB, solid state drive)
LR files are NEF, exported files are JPG
I've tried to export to the same group of photos multiple times with different names and different output file sizes (8MB, 5MB, 2MB). Each time the list of failures is different.
Some of the thumbnails which appear in Windows Explorer are corrupted (part of the thumbnail is gray)
When I try to export the same group of photos to the external USB 3.0, it works perfectly!
Here is an example of one of the LR log files:
The file could not be written. (17)
    G:\2013\Stratton and Colorado\2013\2013-06-23\_D7K1915.NEF
    G:\2013\Stratton and Colorado\2013\2013-06-23\_D7K1918.NEF
    G:\2013\Stratton and Colorado\2013\2013-06-23\_D7K1919.NEF
    G:\2013\Stratton and Colorado\2013\2013-06-23\_D7K1939.NEF
    G:\2013\Stratton and Colorado\2013\2013-06-23\_D7K1948.NEF
    G:\2013\Stratton and Colorado\2013\2013-06-23\_D7K1958.NEF
    G:\2013\Stratton and Colorado\2013\2013-06-23\_D7K1961.NEF
    G:\2013\Stratton and Colorado\2013\2013-06-23\_D7K1964.NEF
    G:\2013\Stratton and Colorado\2013\2013-06-23\_D7K1968.NEF
    G:\2013\Stratton and Colorado\2013\2013-06-23\_D7K1971.NEF
    G:\2013\Stratton and Colorado\2013\2013-06-23\_D7K1972.NEF
    G:\2013\Stratton and Colorado\2013\2013-06-23\_D7K1973.NEF
    G:\2013\Stratton and Colorado\2013\2013-06-23\_D7K1978.NEF
    G:\2013\Stratton and Colorado\2013\2013-06-23\_D7K1983.NEF
    G:\2013\Stratton and Colorado\2013\2013-06-23\_D7K1986.NEF
    G:\2013\Stratton and Colorado\2013\2013-06-23\_D7K1989.NEF
    G:\2013\Stratton and Colorado\2013\2013-06-23\_D7K1990.NEF

http://forums.adobe.com/community/search.jspa?peopleEnabled=true&userID=&spotlight=false&c ontainerType=14&container=3316&rankBy=date&q=%22file+could+not+be+written%22

File open error at ftp even the file is not open.....

Hi,
i get the error File open with the fm GUI_UPLOAD while uploading the XML file from FTP server.
What is interesting is that i did not open the file, furthermore i closed all the windows else that sap window,
but still i get the file open error.
We create the xml file when created a new delivery. And this xml file is sent to a bukrs's ftp and they also sent the same xml after some validations done.
When it arrives to our ftp server i make it post goods issue automatically but from yesterday i got the file open error, it was working fine just before today.
What could be the problem?
Hint: Yesterday and previous day files still work fine but files created today are faulty.
Thanks.

Thanks for replies.
My code is that:
call function 'HTTP_SCRAMBLE'
    EXPORTING
      source      = gv_password
      sourcelen   = slen
      key         = gv_key
    IMPORTING
      destination = gv_password.
describe field gv_password length gv_pwd_len in character mode.
call function 'FTP_CONNECT'
    exporting
      user            = 'HHH\GrupMMM'
      password        = gv_password
      host            = '10.10.10.10' "assume that is the host
      rfc_destination = 'SAPFTPA'
    importing
      handle          = gv_handle
    exceptions
      not_connected   = 1
      others          = 2.
if sy-subrc eq 0.
    "concatenate 'put' ld_full_path '[' ld_full_path ']'
    *gv_com = 'lcd C:\MMM\RETURN_FILES'.*
    clear mtab_data.
    free mtab_data.
    call function 'FTP_COMMAND'
      exporting
        handle        = gv_handle
        command       = gv_com
      tables
        data          = mtab_data
      exceptions
        tcpip_error   = 1
        command_error = 2
        data_error    = 3
        others        = 4.
    if sy-subrc eq 0.
    endif.
When i get the list of the return files i get data of each file via gui_upload.
CALL FUNCTION 'GUI_UPLOAD'
        EXPORTING
          filename   = filename
          filetype   = 'BIN'
        IMPORTING
          filelength = totalsize
        TABLES
          data_tab   = xml_table[]
        EXCEPTIONS
          FILE_READ_ERROR = 1
          FILE_OPEN_ERROR = 2
          NO_BATCH = 3
          GUI_REFUSE_FILETRANSFER = 4
          INVALID_TYPE = 5
          NO_AUTHORITY = 6
          UNKNOWN_ERROR = 7
          BAD_DATA_FORMAT = 8
          HEADER_NOT_ALLOWED = 9
          SEPARATOR_NOT_ALLOWED = 10
          HEADER_TOO_LONG = 11
          UNKNOWN_DP_ERROR = 12
          ACCESS_DENIED = 13
          DP_OUT_OF_MEMORY = 14
          DISK_FULL = 15
          DP_TIMEOUT = 16.
However i get the open error for all files created today.
By the way, how can i use open dataset instead of ftp commands? How can i see the files at apllication server?
i get the files via IP of the FTP but how can i get files from application server?
Thanks.

Infopackage Loading error - The file is not open

Similar Messages

Maybe you are looking for