Infopackage loading problem upto psa

hi
ecc i ahve data for 0hr_pa_os_1 around 34000 records
when i am trying to load psa i am getting this error
Express document "Check Load from InfoSource" received from author "CUA_DB1_108"
please let me know what could be the reason
how can i solve

hi
while loading to psa i am getting this error
i checked data base space is fine, they gave authorizations sap_all
converted floe into Bi 7.0
i am uisng data from ecc to BI
Error message from the source system
Diagnosis
An error occurred in the source system.
System Response
Caller 09 contains an error message.
Further analysis:
The error occurred in Service API .
Refer to the error message.
Procedure
How you remove the error depends on the error message.
Note
If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request.
Error occurred in the data selection
Request IDoc : Application document not posted

Similar Messages

The data has been updated-loaded upto PSA only

Hi,
The data has been updated-loaded upto PSA only even though the processing type
has update into PSA and then into data targets. Please let us know what can be problem and what will be the solution for this.
Regards,
Raghav

Hi Kolli,
Do you have the further update from PSA process in your process chain? You will need this if the InfoPackage has the 3rd option on the Processing tab (PSA and then to data targets).
Hope this helps...

How to load data from PSA to CUBE & DSO at a time using DTP in BI 7 ?

HI all,
I am new to BI 7 . How to load the data at same time to DSO & INFO CUBE using DTP.
Please provide me steps to load & plz specify which update mode I have to use ( FULL OR DELTA ) which one is best.
Plz Suggest me.
Thanks & Regards,
Kiran m.
Message was edited by:
kiran manyam

Below are the basic steps which we follow in any BI 2004S system:
1)Create datasource. Here u can set/check the Soucre System fields.
2)Create Transformation for that datasource. (no more update rules/transfer rules)
2.1) While creating transformation for DS it will ask you for data target name, so just assign where u want to update ur data.
DataSource -> Transformation -> Data Target
Now if you want to load data into data target from Source System Datasource:
1) Create infopackage for that data source. If you are creating infopackage for new datasources, it will only allow you update upto PSA, all other options u can see as disabled.
2)Now Create DTP (Data Transfer Process) for that data source.
3) NOw schdule the Infopackage, once the data is loaded to PSA, you can execute your DTP which will load data to data target.
If you are loading data from one one data target to other, no need to use PSA, you can directly execute DTP in that case.
Data Source -> Transformation (IP/DTP) -> Data Target1 -> DTP ->Data Target 2
Use the below link for detailed example:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/fc61e12d-0a01-0010-2883-e2fc63ef729b
Infosources are no more mandatory with BI 7.0, below is the link to scenarios where we use infosources:
http://help.sap.com/saphelp_nw04s/helpdata/en/44/0243dd8ae1603ae10000000a1553f6/content.htm
Full or delta depends on your requirement...
chk the below thread to know better
difference between the various loads
hope it helps
Message was edited by:
sriram viswanathan

Error in loading data from PSA to masterdataTables by using ProcessManually

Hello,
While loading Attribute master data to Masterdata tables, the data is loaded successfully to PSA but when I clicked process manually tab in the monitor screen to load the Attribute master data to Masterdata tables it is showing error.
Can anyone pls help me in solving this issue.
Thanks,
Soujanya

Hi Soujanya,
If it is a SAP BI 7 data flow, in order to load data from PSA to the InfoObject master data tables, you have to run the corresponding DTP.
On the other hand, if it is a SAP BW 3.x data flow, the InfoPackage should be configured so as to update data to subsequent targets (that is to say, the InfoObject).
Finally, take into account that if the DataSource provides duplicate records, the DTP or the InfoPackage (depending on the dataflow version) should be configured in order to deal with it. Otherwise, you could receive error messages during data load.
I hope this helps you.
Regards,
Maximiliano

Error when i am loading data from PSA to ODS

hai Gurus
Very good morning
Actually i am loading data from PSA to ODS.
But when i am loading data i am getting the error InfoObject/BIC/0REFER_DOC does not contain ALPHA -CONFORMING VALUE 0.
Can anybody help me to solve the problem and reload the data
Thanks & Regards
Jayavardhan

Hi,
Lacs of postings are there in this forum on this topic. Searching teh forum is the best option for u now.
With rgds,
Anil Kumar Sharma .P

Load Hierarchies using PSA

Hello,
We are trying to enable the sign reversal characteristic (0SIGNCH) for a hierarchy in order to reverse signs of certain accounts during extraction.
The documentation refers to the following prerequisites:
"...the hierarchy must have flexible hierarchy structures. This is the case when the hierarchy is loaded via the PSA and, as a result, has transfer rules."
"A hierarchy DataSource from a SAP source system must support loading by using a PSA."
How can we determine if the hierarchy datasource supports PSA loads? Example?
Is there a way to enable PSA loads for hierarchies?
Thanks,
Adam
How can we enable

Hi Adam,
I would NOT recommend tricking the system this way. The extractor needs to deliver different packages for IDOC and PSA and is not enabled to do this.
When the PSA method for hierarchies was introduced the development decided to enable this feature for only one extractor, I think it was EC-CS items or something similar because they wanted to make use of the new feature 'Signs on Nodes'. The other extractors were not changed and up to then there were no plans to change it.
If you need this you should contact development and ask for a solution. Maybe the problems aren't critical for 0COSTELMNT and you can change it, maybe they provide a solution with remote consulting, maybe they think your reasons are valid and they provide a note.
Best regards
Dirk

How to load data from PSA in BI 7.0

Hi,
Gurus
I'm trying to load data from PSA to my InfoObject masterdata but I can't get the change mode, so I change the processing to data Target.Right now its on PSA only
I will reward poaints
Regards
Alex

Hi,
I am just a beginner in 7.0, i had the same issue I loaded the master data in PSA but couldn't load in Data target i.e. info object (correct me if my understanding of your problem is wrong).
Try these steps:
1) Create and activate Transformation.
2) Create and activate DTP first then in DTP itself in <b>Execute tab</b> click "execute" ,go to infoobject right click on the info object you have created and select "maintain info object" , the datas will be loaded into info object
*Please assign points if useful.

Load data from PSA to ODS in Process Chain

Hi All,
I want to load the data from PSA to ODS. I am using 3.5 Version. I have created the Info Package to load the data from R/3 to ODS.
I just want to load data in the following Condition
1. Need to load data from R/3 to PSA.
2. Need to load data from PSA to ODS.
I need to include this two Info Packages in Process Chain.
I dont find any option to load PSA to ODS through Process Chain..
Pls Suggest.
Thanks,
Ram.

Hi Ram,
You can keep the settings in the infopackage to load data from R/3 to PSA (by giving the settings as PSA and then into datatargets). Specify the option Update in all data targets for which the Rule Exist unde rthe Data Targets Tab.
Then in Process Chian, there is an option by the name REad PSA and Update Datatarget under the node Load Process and Post-Processing in the Process Types.
In the varaint, specify the infopackage name and save the varinat and uise it in the PC.
Regards
Sunil

Long time to load data from PSA to DSO -Sequential read RSBKDATA_V

Hi ,
It is taking long time to load data from PSA to DSO. It is doing Sequential read on RSBKDATA_V and table contents no data .
we are at - SAPKW70105. It started since yesterday . There is no changes in system parameters.
Please advice.
Thanks
Nilesh

Hi Nilesh,
I guess the following SAP Note will help you in this situation.
[1476842 - Performance: read RSBKDATA only when needed|https://websmp107.sap-ag.de/sap/support/notes/1476842]
Just note that the reference to Support Packages is wrong. It is also included in SAP_BW 701 06.

Loading Data from PSA to ODS

Hi,
right now there are nearly 50 requests in my PSA. I want to load entire data from PSA to ODS at a time. Ours is 3.x flow. I m able to load one request at a time. Can anyone help me to load all requests at atime?
Please give me step by step.

Hi Narendra,
First of all all the records are unable to pick up at a time i single attempt due to. follow the reason
It is not possible to load all the PSA requests' to target at a time.Because records picks up from PSA to Data target one by one due dependencies of routine run on the data transfer up to the extent. anyway if you can do this thing the process of loading the requests' one by one, offcourse it is totally depends upon manual .
Hope you are understood the scenario.
Regards,
Vamsi Krishna Chandolu

Load fails while running a Process Chain even before loading to the PSA.

Hi Experts,
We are working on BI 7.0 and ECC 6.0 on an IS-U Project.
We are loading Transaction Data using Process Chains. Data load is failing even before loading to the PSA and the error message is as below:
Error message during processing in BI
Diagnosis
An error occurred in BI while processing the data. The error is documented in an error message.
System Response
A caller 01, 02 or equal to or greater than 20 contains an error meesage.
Further analysis:
The error message(s) was (were) sent by:
Inbound Processing
Procedure
Check the error message (pushbutton below the text).
Select the message in the message dialog box, and look at the long text for further information.
Follow the instructions in the message.
Had anyone come across this type of error, if so, what could be the reason of failure and probable solution.
Your time is very much appreciated.
Thanks in Advance.
Best Regards,
Chandu.

Hi,
It might be a network connection between the source system and BW? Can you get your Basis colleague to look into the connection?
Hope this helps.
Cheers,
Gimmo

Error While Monitoring the Infopackage Load(URGENT)

Hi All,
I am monitoring one Process Chain in that one Infopackage load is going on since 1h 45m , i have checked for the short dumps but there is no time out issue and i am checking the job status R/3 side in SM37 but it saying no job matches with this selection criteria.
Can anyone please help me out in this isuue.
Thanks
karuna

Hello,
Check the background job (SM37) by giving one day before in the BW Side. Also goto RSMO -> Detailed tab and check still IDoc is being received and in the Status tab check the waiting time of the job for cancellation.
[Thanks|http://chandranonline.blogspot.com/]
[Chandran|http://chandranonline.blogspot.com/]

Urgent : Error while loading data from PSA to DSO

Hi,
I am working on 7.0.
When i look for data into PSA then i have 1 date field which is containing data in proper date format. This date field is mapped with 0CALMONTH & 0CALYEAR for which i have written routine and directly assigned to 0DOC_DATE .
I have written a start routine to do some modifications in SOURCE_PACKAGE.
But When i am loading data from PSA to DSO its giving below error:
" Exception wrong_date ; see long text RSTRAN 303
Diagnosis
An exception wrong_date was raised while executing function module
RST_TOBJ_TO_DERIVED_TOBJ .
System Response
Processing the corresponding record has been terminated.
Procedure
To analyze the cause, set a break point in the program of the
transformation at the call point of function module
RST_TOBJ_TO_DERIVED_TOBJ . Simulate the data transfer process to
investigate the cause. "
I am not getting why this error is coming up
pls guide me !!

you can map the code to DOC_DATE .
The code is used to read from any date and convert that into Fiscal year/period.
Try this code.
data: l_fiscyear type t009b-bdatj.
call function 'FISCPER_FROM_CALMONTH_CALC'
exporting
id_date = COMM_STRUCTURE-doc_date
iv_periv = 'V9'
importing
ev_fiscyear = l_fiscyear.
result value of the routine
RESULT = l_fiscyear.

Flat-File Loading problem

Hi Friends,
I am struggling with flat-file loading problem. I am trying to load a .csv file into data target. I took all pre-cautions while loading data. I look into preview and simulate the data. Everything is ok, but when i schedule the data, i found 0 records in the monitor. The following is the STATUS message of the above problem:
   No data available
Diagnosis
The data request was a full update.
In this case, the corresponding table in the source system does not
contain any data.
System response
Info IDoc received with status 8.
Procedure
Check the data basis in the source system.
         Can anybody help me what is the problem and procdure to resolve it?
Regards,
Mahesh

Hi Eugene,
Thanks for the quick reply. The following screen-shot tells you the messages of detail tab;
OVER ALL STATUS MISSING WITH MESSAGES OR WARNINGS
REQUEST: MISSING MESSAGES
EXTRACTION
EVERYTHING IS OK
DATA REQUEST RECEIVED
NO DATA AVAILABLE DATA ELECTION ENDED.
PROCESSING
NO DATA
           The above message was shown in details tab. Pls guide me to locate the problem.
Regards,
Mahesh

App keeps loading problem solve

Anyone with an app still loading problem can get rid of it by going into the app store. tap on "updates"- bottem right corner. tap on purchased where you get a list of your downloads then tap on the cloud with the arrow, enter your pin. hit ok for app over 20mb. go back into the app store and to your purchased list and wait for it to reload. once done come out of the app store and hopefully all the loading apps are gone. hope it works for you.

I had this same problem when trying to download some training app. I could not delete or get it to upload completely either. Very frustrating. What I did was plug it into my computer, went to Itunes and searched the same app. I was able to download it here and then it starte to sync with my Iphone. You can remove the app after it finishes the download if u want. Hope this works!

Infopackage loading problem upto psa

Similar Messages

Maybe you are looking for