Infopackage loading truncate 2 digit for Chile Peso

Hi,
Could any experts shred some lights to me regarding this issue below :
The loading of a datafile from infopackage to LYE ODS, it truncated the amount value by 2 digits causing the web report figure to reduce by 100 for currency chile peso, CLP.
For example the value for record 1 is supposed to be CLP 14930, record 2 is CLP 168510 and etc. However, when loaded into LYE ODS, these values were truncated by 2 digits i.e. 149, 1685 and etc,(respectively) were being stored in the active table of that ODS.
I have checked the customizing for 'set decimal places for currencies' for CLP which is 0 decimal.
I found there is a workaround for this i.e. at infopackage, uncheck 'Currency conversion for External systems'. But that is not suppose to be the way because previously for few quarters loadings they were fine with the check on for that option.
Any experts could give me some light on where goes wrong.
Thanks in advance.
Regards,
Lye Huat

Hi,
Sometimes 'USD' in the source system is changed to 'US$'. I remember one instance where I had a problem when this happened, the amount was truncating by two digits.
Check if the way the unit for Chile Peso was modified. If it was you have a to a tansformation in your transfer rules
<b>EXAMPLE</b>
IF TRANSTRUCTURE-UNITFIELD = 'US$'
RESULT = 'USD'.

Similar Messages

Error While Monitoring the Infopackage Load(URGENT)

Hi All,
I am monitoring one Process Chain in that one Infopackage load is going on since 1h 45m , i have checked for the short dumps but there is no time out issue and i am checking the job status R/3 side in SM37 but it saying no job matches with this selection criteria.
Can anyone please help me out in this isuue.
Thanks
karuna

Hello,
Check the background job (SM37) by giving one day before in the BW Side. Also goto RSMO -> Detailed tab and check still IDoc is being received and in the Status tab check the waiting time of the job for cancellation.
[Thanks|http://chandranonline.blogspot.com/]
[Chandran|http://chandranonline.blogspot.com/]

Decimal Places are not Permitted for Chile Country

Hi All,
In OVA8 settings for Chile country at the field max.doc value, i am not able to use the decimals. getting error message as Decimlas are not permitted (Message no - 00011). checked OY04 - there is no decimals for Chile currency. checked - OY01 Dec.Pt. format as 1.234.567,89
For Argentina, Peru and Uruguay same settings has been done and i am able to save the decimal points in OVA8 at the field max.doc value.
Please let me know if there is any specifis settings for Chile or SAP NOTE
Thanks,
Mahesh

HI,
just looking at a brand-new ECC60 / EhP4 system where nobody changed OY04 settings.
I can find CLP (Chilean Peso) in the list with ' ' decimal places, so thats why there are no decimal places allowed.
Check again OY04, if you find an entry for CLP and NOTHING is maintained it means that ZERO dec. places are allowed.
If you find an entry in OY04 with a number of decimal places >0 than this decimal places are allowed.
If there is NO entry for a given currency then its used with 2 decimal places (SAP standard).
So OY04 is only for the currencies that should be treated different as SAP standard.
Best regards, Christian
Edited by: Christian Ortner on Feb 3, 2011 5:09 PM

Infopackage - load to ODS - status yellow !

Hi everybody,
I am on BI 7.0 and i use Architecture 3.5.
When i transfer data (36000 records about) from a data table to ODS, i obtain for the 2 last days
a problem of loading -
> Status is always yellow.
As concerns TRFC, In transaction sm58, i obtain the following error:
RFC:     RSAR_TRFC_DATA_RECEIVED
Status: Conversion Error
I have different behaviours following configuration of my InfoPackage when Incorrect Data Records Occur:
   - Valid Records update, reporting possible -
> Status Yellow
   - Valid records update, no reporting       -
> Status Red (few records are wrong)
Have you any ideas ?
Thanks a lot,
Rodolphe.

Hi,
If your data packets are getting into BW, then check your transfer and update rules, for any routines where the data is getting stuck.
If there are warnings, in the infopackage there is an option for treatment of warnings. Select the radio button as green and then reload the data.
Also suggest you keep an eye on SM50/51/66 to check what's happening with the data load.
Check the size of the data packets. If possible reduce the data size of the packets and see if that helps.
Cheers,
Kedar

My ipod has had a previous owner How do I change my ipods email address so that when I try to down load anything it asks for the previous owners password but when I go to my account it says its my email my account but not when I try to download????

My ipod has had a previous owner How do I change my ipods email address so that when I try to down load anything it asks for the previous owners password but when I go to my account it says its my email my account but not when I try to download can anyone please help me ????Plus it still has some of the previous owners pictures and videos on it that I want to delete and can't????? Also is there a way to kill the apps that u have used throughout the day the battery doesn't last long at all ??????

- How did you dlete stuff from the iPod? If you have a 1G or 2G iPod and deleted the stuff by going to Settings>Genera.>Reset>Erase aall contents and settings without being connected to a power source, the battery dies before he erase was comleted since it can take hour.
- In any event try the following:
- Connect to a chaging sour for three hours.
- Reset the iPod and then connect to the computer and try to restore va iTunes.
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Next try placing the iPod in recovery moe and then try to restore. For recovery mode:
iPhone and iPod touch: Unable to update or restore
- Last try DFU made and restore.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

Jasper report on HTML when one image loaded from database and for the other

How to generate jasper report on HTML when one image loaded from database and for the other we give a image path
My code
ByteArrayOutputStream baos = new ByteArrayOutputStream();
          exporter = new JRHtmlExporter();
          exporter.setParameter(JRExporterParameter.JASPER_PRINT, print);
          exporter.setParameter(JRExporterParameter.OUTPUT_STREAM, baos);
          exporter.setParameter(JRHtmlExporterParameter.IMAGES_URI, strImageInputDirectory);
     exporter.setParameter(JRHtmlExporterParameter.IMAGES_DIR_NAME, strImageOutputPath == null ? "." : strImageOutputPath);
     exporter.setParameter(JRHtmlExporterParameter.IS_OUTPUT_IMAGES_TO_DIR, Boolean.TRUE);
     exporter.setParameter(JRHtmlExporterParameter.IS_USING_IMAGES_TO_ALIGN, Boolean.FALSE);
     exporter.setParameter(JRHtmlExporterParameter.IS_WHITE_PAGE_BACKGROUND, Boolean.FALSE);
          exporter.exportReport();
          byte[] bdata = ((ByteArrayOutputStream) baos).toByteArray();
Can any one help pls
Message was edited by:
ameet.au

hey sorry for posting it in this forum.
but do u have sample code for making it work.. since i am able to do it on PDF format(image from Database and another stored in the webserver) using
byte image[] =(byte[]) outData.get("image");
                    ByteArrayInputStream img = new ByteArrayInputStream(image);
                    hmimg.put("P_PARAMV3", img);
print = JasperFillManager.fillReport(reportFileName, hmimg, jrxmlds);
bdata= JasperExportManager.exportReportToPdf(print);

PLUG ADAPTERS FOR CHILE

Wondering if anybody can help: I'm going to Chile on Friday and am borrowing a 15" Titanium Powerbook from my office. I can't get a definitive answer from Applecare about the World Travel converter kit, with the wall outlet plug adapters. Will it work in Chile? The box and the manual list Europe and Australia and Hong Kong and all kinds of places, but there's no mention of South America at all. Different countries down there have different voltage. Chile is 220.
I've talked to Tech Support, I've talked to Customer Service. All they say is "I don't know." I even went to an Apple store today to look at the kit and they reufsed to open a sealed box and they had no display models. And again, they just shrugged and said, "Oh, it doesn't say South America? I don't know."
I checked International Electrical Supply websites and they say that Chile is 200 v and you need a WA-10 and WA-12 grounded plug adapter and it shows the pictures, and a #1 and #6 ungrounded. But the Apple manual doesn't list numbers or letters. Just illustrations, which feels to risky to me to go by. Then Radio Shack says for Chile you need their converter called "B" and plugs "2" and "5." (Which they didn't have).
So it seems like everybody calls this stuff something else.
Since the Apple power adapter will convert the voltage to 220, all I need are the plug adapters, right? The Apple power thing has a 3-prong plug. I guess I have to purchase the products from somewhere else, it seems, as I'm nervous about purchasing from Apple and finding out the plug adapters don't work. And I can't find anybody who knows anything about them.
Anybody out there with experience on this stuff? Since it isn't my laptop, I'm even more concerned that I don't screw this up.
Thanks in advance for your help.

Buy the 98 cent plug adapters which are our style on top and two round prongs on the bottom. The power supply works from 100-240 and 50/60 hz so you just need to accommodate the plug format. I have a bag of them and am off to Chile in a week. Decent hotels usually have a box of them to lend out as well.
You might have to get a (somewhat discouraged) 3-2 prong adapter here first, e.g. the plug is 3 prongs that you have now and you need to get it to 2 prongs to fit in the Chile adapter as all the sockets only have the two holes there.
So it isn't grounded all that hot but there is usually a wire on the adapter so you can always run a ground wire to the screw in the cover plate or a pipe etc.
I don't bother but make sure you are not using it in the bathtub or something like that.

I got charged twice for a movie (Safe House). Can i get a refund for that? we were not able to finish the movie and now were trying to watch it again. We have an hour left, however the apple tv is still loading the movie again for 2 hrs

i got charged twice for a movie (Safe House). Can i get a refund for that? we were not able to finish the movie last night, and now we're trying to watch it again. We have an hour left, however the apple tv is still loading the movie again for 2 hrs & 46 mins.

Welcome to the Apple Community.
Apple's policy on sales of digital content is that all sales are final. If however you wish to appeal to Apple, select the content which is causing a problem and use the 'Report a problem' button in Your Purchase History.

Office Web Apps Load Balancing Configuration Issue for SharePoint 2013

I have load balanced servers dedicated for Office Web Apps with name “md1xxxwfe1” and “md1xxxwfe2”
, both this servers are load balanced by CISCO Load balancer. And I have mapped Load Balancer Virutal IP with host name officeapps.jda.corp.local in the DNS records.
Things are working fine if I add new farm by using New-OfficeWebAppsFarm
with server name as internalurl in PowerShell console
as like “ -internalurl http://
md1xxxwfe1 but when I use –internalurl officeapps.jda.corp.local it is not working at all. I’m not getting what to do at this point.
I have gone through following blogs but no luck.
http://blogs.technet.com/b/meamcs/archive/2013/03/27/office-web-apps-2013-multi-servers-nlb-installation-and-deployment-for-sharepoint-2013-step-by-step-guide.aspx
http://blogs.technet.com/b/office_resource_kit/archive/2012/09/11/introducing-office-web-apps-server.aspx
http://davidlimsharepoint.blogspot.in/2013/02/installing-and-configuring-office-web.html
http://sps2013.blogspot.in/2013/09/office-web-apps-with-sharepoint-2013.html
The output of the wfe1 server is attached with this. When I open http:// /hosting/discovery in wfe1 I’m getting following result (attached
screenshot) but it should show hostname rather than server name.
Please help me
Thanks, Ram Ch

Hi Ram ,
For troubleshooting your issue, please take steps as below:
Just about any load balancing solution will work, including a server that runs the Web Server (IIS) role running Application Request Routing (ARR):Install
Application Request Routing
Install the certificate on the load balancer as described under Securing Office Web Apps Server communications by using
HTTPS.
Make sure you have configured the cluster correctly for full internet name:
Reference:
http://technet.microsoft.com/en-us/library/jj219435.aspx#loadbalancer
Thanks,
Eric
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support,
contact [email protected]
Eric Tao
TechNet Community Support

How to Load the Resource Master for Generic Resources by Department?

We are using P6 enterprise version in our company having a central database.
Q1a.) We set the Activities view > Resource Usage Spreadsheet > Select View 1) By Resource OR 2) By Role.
The result is the spreadsheet presents the Remaining Early Units by Resource OR by Role. Other spreadsheets behave the same way. Is it possible to view the total Remaining Early Units and not have it separated by Resource OR Role?
Q1b.) We would like to find out the recommended structure to load Generic Resources (ie. professional and trades such as Civil Engineer, Mechanical Engineer, Carpenter, Welder etc.) for each Department (ie. 8221, 9362, 8524 etc.) into the Resource Library. Example: we would like to load Civil Engineer once for departments 8221, 9362, 8524, load Welder once for departments 9362, 8524, etc.
We contacted Primavera Support and they pointed us to use Roles.
Thank-you for any suggestions you may have.

i think you could try to model it like this:
- define a single "mech eng" role in the role tree (not too deep or even a flat list). no dept's mentioned here. keep the role tree strictly "speciality" oriented or anyway according to their technical classification.
Role ID     Role Name
Engr     Engineer
.......Engr.SE     Structural Engineer
.......Engr.EE     Electrical Engineer
.......Engr.ME     Mechanical Engineer
- define any number of resources (either individuals, or teams or even a combination of the two) in the resuorce tree.
1 eng with a capacity of 8h/d, a fixed formation (team) regardless of the number of individuals would still have a capacity of 8h/d if they can only accomplish tasks together. if assigning a team of 5 means means faster for fixed workload or more for fixed duration then define a fixed team (again if this is the case) as a single resource with a capacity of 40h/d or simply define and assign the required number of individual eng's 8h/d max each. use activity duration type to switch between duration driving and non-driving resource usage.
e.g.
Resource ID     Resource Name     Resource Type     Default Units / Time     Max Units/Time     Primary Role     Roles
.......*ElecEng     Electrical Engineers*     Labor     20.00h/d     20.00h/d     Electrical Engineer     Electrical Engineer
..............EE1BARBW     Barb Wire, Senior Electrical Engineer     Labor     10.00h/d     10.00h/d     Electrical Engineer     Electrical Engineer, Project AQ
..............EE2BILLS     Bill Sanders, Junior Electrical Engineer     Labor     10.00h/d     10.00h/d     Electrical Engineer     Electrical Engineer, Consultant
.......*MechEng     Mechanical Engineers*     Labor     10.00h/d     0.00h/d     Mechanical Engineer     Mechanical Engineer
..............MechEng T1     mech eng team 1     Labor     8.00h/d     8.00h/d     Mechanical Engineer     Mechanical Engineer
..............MechEng T2     mech eng team 1     Labor     16.00h/d     16.00h/d     Mechanical Engineer     Mechanical Engineer
.....................MechEng T2.1     ME 2.1     Labor     8.00h/d     8.00h/d     Mechanical Engineer     Mechanical Engineer, Consultant
.....................MechEng T2.2     ME 2.2     Labor     8.00h/d     8.00h/d     Mechanical Engineer     Mechanical Engineer
- create the necessary res to role associations. one employee or team (i.e. res) can be linked to one primary qualification and several other proffesions or specialities (i.e. roles)
- when assigning to activities, if a particular individual/ team is required assign directly the res. select several activities requiring mech eng, select 1 or several mech eng's and assign them (use resource security to limit user's access to certain res nodes).
- if any res with a particular role can perform the task, assign the role. later on if you decide for a res, you can assign a particular resource through the previously assigned role. decide applicable rates and h/d between role and res.
- you can track allocation in spreadsheets and histograms by resource or role (or by activity for both). if individual res have clear capacities, for roles you can chose between custon role limits (manual) and system calculated for each role based on res having that as primary qualification (user pref)
- you can report by activity / WBS / project / portfolio (tracking)
- solve over-allocation by levelling, by switching between res for the same role, etc
- optimise duration vs. load and/or # of res/roles (and viceversa)
Edited by: Tibi on Oct 9, 2009 9:40 PM
Edited by: Tibi on Oct 9, 2009 9:59 PM

Whenever I turn my MacBook pro on, all the other stuff is loaded (MS word/excel/powerpoint), Spotify, iCal, etc are automatically loaded, so in order for me to go to my desired website, I have to close (x) out all applications loaded. Please advise.

Whenever I turn my MacBook pro on, all the other stuff is loaded (MS word/excel/powerpoint), Spotify, iCal, etc are automatically loaded, so in order for me to go to my desired website, I have to close (x) out all applications loaded. Please advise.

If you are using Lion:
Dealing With The Resume Feature of Lion
Managing Mac OS X Lion's application resume feature.
If you shutdown your computer you should get a dialog asking if you want applications to resume on the next startup. Simply uncheck the box to prevent that from occurring. Open General preferences and uncheck the option to Restore windows when quitting and re-opening apps. You can also install a third-party utility to control resume features on individual applications: RestoreMeNot or Application State Cleaner.
It is possible to completely stop the Resume feature although I'm unconvinced that it is that annoying. Nevertheless see the following:
If you have not yet done so you must first make your /Home/Library/ folder visible. Open the Terminal application in the Utilities folder. At the prompt paste the following command line:
chflags nohidden ~/Library
Press RETURN. Quit the Terminal application.
In the Finder navigate to the /Home/Library/Saved Application State/ folder. Delete the contents of the folder. Back up to the /Home/Library/ folder. Select the Saved Application State folder. Press COMMAND-I to open the Get Info window. In the Sharing and Permissions panel at the bottom click on the lock icon and authenticate. Set each of the listed entries to Read Only. Close the Get Info window.
Quit all open programs except the Finder (this is very important.) Next, navigate to the /Home/Library/Preferences/ByHost/ folder. Look for a .plist file with "com.apple.loginwindow." in the file name followed by some numbers in hexadecimal. Select the file. Press COMMAND-I to open the Get Info window and in the Sharing and Permissions panel click on the lock icon and authenticate. Set each of the listed entries to Read Only. Close the Get Info window. If you also find a file with the same filename but with a last extension of ".lockfile," then you should delete it.
The above should eliminate the Resume feature system-wide. Note that any future system updates or upgrades will likely undo these changes. You will then need to repeat this procedure assuming there are no major changes in OS X related to it.

I down loaded the latest update for itunes and now it says Ive lost MSVCR80.dll and don't know how to repair it

When requested I tried to down load the latest update for itunes and now I cant open itunes as it says Ive lost the MSVCR80.dll file and I don't know how to repair it.
I've tried re-installing as the error message instructed but that hasnt worked.
Can anyone help?

Try the following user tip:
Troubleshooting issues with iTunes for Windows updates

Load FI data only for open items

Hi all
I want to load FI data only for open items.
We started off with FI_GL_4 which has STATUSPS(status of FI line item)based on which we have written a start routine to filter out the closed items.
But for other FI-GL datasources we dont have STATUSPS field.
Then can we load data directly without applying any restriction on it as we dont have STATUSPS field in it?
Or is there an other way to find all open items ?
Please helpout.
Awaiting replies.
Harika.

Hi Harikag,
when you are loading delta data in 0FI_GL_4, it is NOT the right approach to load only the open items.
Say for example, you have loaded a record with open status.
If the status of the record gets changed to 'Closed' in SAP, then this will not flow to BW, because of the filter that you are trying to apply in the data load.
So the item will continue to remain open in BW, though it is closed in R3.
hence it is highly recommended to do this filtering at report level.
Otherwise, you are looking at full load option by dropping data everyday, which will have performance issues in loading.
Thanks,
Krishnan

How to load an Applet application for 1000cards?

Hi Friends..
I want to know How to load an Applet application for 1000cards?..
Assume that, i have an Applet application that need to loaded into 1000cards..
So, how to solve this?
Do i must to load an application manually for each card?
Is there any another way?
Thanks in advance..

for 1000 cards you can use a "small" printer like an evolis "dualis" or something like that
we've produced thousands of cards with this method in my company.
the pro is that you can also print the cards in the same time.
they usually have simple APIS like get_new_card_from_loader(), put_card_on_contacts(), eject_card()
you can connect any reader on the printer , the raw card contacts are available on a connector.
some printers also have contactless couplers.
but remember that deploying cards in the field is not just loading an applet.
it's also a cryptographic challenge, you need to change the card keys or anyone will be able to play with your cards, adding and removing applets as they want.
typically this is achieved by using an ultra secret mother key and whatever derivation algorithm you like using data from INIT UPDATE as diversifier. example, you can TDES cipher part of the INIT UPDATE data using the mother key as TDES key, or use something involving SHA1, using a HSM if you are serious, etc.
for your entertainment here is a high volume card personnalization machine. That's amazing.
http://www.youtube.com/watch?v=6ZBF_yKRF5w

DBD: Error while trying to load the transport provider for odbc. Failed to load the library. System error: The specified module could not be found.

Hello Everyone,
We are getting an error while trying to create an Universe via Microsoft -> MS Analysis Services 2014 -> OLEDB for OLAP Provider under Connection in UDT -"DBD: Error while trying to load the transport provider for odbc. Failed to load the library. System error: The specified module could not be found." We have installed BI 4.1 SP05 in our system. As per earlier posts in scn in BO XI 3.x this issue used to be for improper installation of Integration KIT but in our scenarion Integration KIT is within the BO 4.1 package so no seperate installation is required. Moreover I have checked whether all the driver is present under file: "C:\Program Files (x86)\SAP BusinessObjects\SAP BusinessObjects Enterprise XI 4.0\dataAccess\connectionServer\drivers" and seems everything is fine. But still I am getting this error. One important point is we could use IDT because in IDT still we don't have option to connect with 'Microsoft Analysis Services - 2014 (XMLA)' as we are using Microsoft Analysis Services 2014 version.
Kindly help if anyone has faced the same problem with SAP BO 4.1.
Thanks and Best Regards,
Ghosal

Hello Everybody,
The problem is solved now after installing "OLEDB drivers from SQL Server 2012 Feature Pack". We had OLEDB drivers that comes directly from SQL Server but that did not worked out in our case.
Thanks for your support.
Best Regards,
Ghosal

Infopackage loading truncate 2 digit for Chile Peso

Similar Messages

Maybe you are looking for