Infopackage loads 0 record in process chain as BG job not running correctly

Hi Experts,
I have scheduled a daily process chain for Purchasing.
The infopackage in the process chain loads 0 records from R/3 and shows green status but data is available in R/3. Its a FULL update.
But when I load the data manually the infopackage fetchs the record form R/3.
When I checked the background job in R/3 that loaded 0 records, the job gets finished abruptly without fetchig any data.
Please find the job log below:
Job started
Step 001 started (program SBIE0001, variant &0000000210024, user ID RFCUSR)
DATASOURCE = ZPUR_S600
         Current Values for Selected Profile Parameters               *
abap/heap_area_nondia......... 0                                       *
abap/heap_area_total.......... 0                                       *
abap/heaplimit................ 40894464                                *
zcsa/installed_languages...... ED                                      *
zcsa/system_language.......... E                                       *
ztta/max_memreq_MB............ 2047                                    *
ztta/roll_area................ 3000320                                 *
ztta/roll_extension........... 2000683008                              *
Job finished
But the background job for the request when I run the infopackage manually calls a function BW_BTE_CALL_BW204010_E (BTE) and fetches the record from R/3.
Please find the job log that fetches the record when run manually.
Job started
Step 001 started (program SBIE0001, variant &0000000210036, user ID RFCUSR)
DATASOURCE = ZPUR_S600
         Current Values for Selected Profile Parameters               *
abap/heap_area_nondia......... 0                                       *
abap/heap_area_total.......... 41230008320                             *
abap/heaplimit................ 40000000                                *
zcsa/installed_languages...... DE                                      *
zcsa/system_language.......... E                                       *
ztta/max_memreq_MB............ 2047                                    *
ztta/roll_area................ 3000000                                 *
ztta/roll_extension........... 2000000000                              *
Call customer enhancement BW_BTE_CALL_BW204010_E (BTE) with 26,596 records
Result of customer enhancement: 26,596 records
Call customer enhancement EXIT_SAPLRSAP_001 (CMOD) with 26,596 records
Result of customer enhancement: 26,596 records
Asynchronous send of data package 000001 in task 0002 (1 parallel tasks)
Call customer enhancement BW_BTE_CALL_BW204010_E (BTE) with 26,596 records
Result of customer enhancement: 26,596 records
Call customer enhancement EXIT_SAPLRSAP_001 (CMOD) with 26,596 records
Result of customer enhancement: 26,596 records
Asynchronous send of data package 000002 in task 0004 (1 parallel tasks)
Call customer enhancement BW_BTE_CALL_BW204010_E (BTE) with 1,062 records
Result of customer enhancement: 1,062 records
Call customer enhancement EXIT_SAPLRSAP_001 (CMOD) with 1,062 records
Result of customer enhancement: 1,062 records
Asynchronous send of data package 000003 in task 0006 (1 parallel tasks)
tRFC: Data Package = 000001, TID = , Duration = 000001, ARFCSTATE =
tRFC: Start = 20110217 054648, End = 20110217 054649
tRFC: Data Package = 000003, TID = , Duration = 000000, ARFCSTATE =
tRFC: Start = 20110217 054652, End = 20110217 054652
tRFC: Data Package = 000002, TID = , Duration = 000001, ARFCSTATE =
tRFC: Start = 20110217 054651, End = 20110217 054652
Job finished
Kindly help me on this issue as why the job run through process chain is not fetchibg any records.
Regards,
Indhuja

Hi Prasanth,
If the background jobs are not availbale when IP is triggered then the BG job will ot be executed and the IDOCs will get struck.
Once we push the IDOc only the BG job will be executed until then the PC will wait with yellow status.
Hence this is not the issue with the non availability of BG WP.
Also for last one week this issue was happening but today the job executed successfully through the Process chain itself.
Then it shows this is not the issue with PC also.
The job is executed using RFCUSR.
Please suggest what would be the possible cause for this issue.
Regards,
Indhuja
Edited by: Induja Rajkamal on Feb 23, 2011 11:48 AM

Similar Messages

Infopackage loads 0 record in process chain

Hi All,
I have scheduled a daily process chain for Purchasing.
The infopackage in the process chain loads 0 records and shows green status.
But when I load the data manually the infopackage fetchs the record form R/3.
Kindly help me on this issue.
Regards,
Indhuja

Hi Induja
It seems the info package which you have in the process chain is not working properly .
Just follow the following steps
Take the info package name which you used when your doing manual run include it in the process chain and remove the existing info package which is there in the process chain and as usual activate it and run it.
Hope its clear a little..!
Thanks
K M R
[Click here to know about KMR Experience|http://in.linkedin.com/in/kishoremadireddy]
Impossible --> I'M Possible
Winners Don't Do Different things,They Do things Differently...!
>
Induja Rajkamal wrote:
> Hi All,
>
> I have scheduled a daily process chain for Purchasing.
>
> The infopackage in the process chain loads 0 records and shows green status.
>
> But when I load the data manually the infopackage fetchs the record form R/3.
>
> Kindly help me on this issue.
>
> Regards,
> Indhuja

Error in Process Chain for DTP- Job not finished

Hi Experts,
We have an issue with one of our process chains. When we execute the chain manually, there is no problem. BUt if we schedule the chain, issues arise. the last part of the chain is DTP. But the job doesnt finished even if the DTP step si already green. Locks occur for the DTP and the infoobject. When we look at the job log in SM37, it is still active. But this should not take a long time, since if we execute it manually it is ok.
Pleas help experts

Guys, I am also facing the same issue.
When DTP is completed successfully, it has the job log blow :
Job started
Step 001 started (program RSPROCESS, variant &0000000391261, user ID BWREMOTE)
Performing check and potential update for status control table
Status 'Executable' (user BWREMOTE)
Status 'Active' (user BWREMOTE)
Program RSBATCH_EXECUTE_PROZESS successfully scheduled as job BIDTPR_335754_1 with ID 06532200
Job finished
When it fails or remain yelllow for long time and then turn into red.
Job started
Step 001 started (program RSPROCESS, variant &0000000391306, user ID BWREMOTE)
Performing check and potential update for status control table
Status 'Executable' (user BWREMOTE)
Status 'Active' (user BWREMOTE)
EXTRACTION OF DATAPACKAGE 000001
EXTRACTION OF DATAPACKAGE 000002
Job finished
The question is, why the program RSBATCH_EXECUTE_PROZESS is not scheduled. Is it because there is no free resource? Or poor response from SAP ECC?
Finally what does "EXTRACTION OF DATAPACKAGE 000001" mean? Its not scheduled?
Regards
MultiABAP
Edited by: MultiABAP on Oct 6, 2010 10:32 AM

Loading master data through process chain

Hi Gurus
I am designing the process chain , I know that I have to start by loading master data first for that I am planning to load attribute first and then to load text and then Hierarchy. Is that the right sequence?
Also how can I make sure that once the master data is loaded , the transaction data loading start automatically?
I am planning to put attribute chage run as last process in every master data loading . Is that correct?
Also i would appreciate if you can tell me the very first step I should follow to start my design, I have already identified the master data and transaction data and their respective dependancies.what would be my next step?
Thanks for your help in advance.
Kris

Hi Kris,
Make two seperate Process Chains for Master Data and Transaction Data
For Master Data:
Your sequence is absolutly correct, Identify what all Master Data Objects and make a list of InfoPackages and Start creating Process Chain as
Start --> Attribute --> Text --> Hier --> Attr Change Run
For Transactional Data:
Identify the Data Targets and the Sequence of loading, then create the Process Chain
NOTE: Always Master Data should be loaded before Transaction Data
After Creating different Chains for Master Data and Transaction Data, Make a one Super Chain called Meta Chain where you can put all these process chains,
Meta Chain --> Process Chain 1( Master Data Chain) --> Process Chain 2( Transaction Data)
also check these threads for process chain creation
Re: Process Chain : Master Data
Re: process chains ?
Hope this helps,
Sudhakar.

Load balancing in the process chains

HI friends
I have 6 subchains in 1 metachain . we are facing a problem where we have to 2 servers . but when we run the process chains they are occuping all the DIA process in only one server . the other server is empty . so is there a way that we can do the load balancing in the process chains . so that the process chains can occupy all the resources in both servers than only one . please do reply . this is very important . thankyou for all your replies .
*Points will be rewarded *.

Hi,
check this out: https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_bc_ccm/~form/handler
additionally some information.
You can specify a server on which the chain will run, but this is not really load balancing. Load balancing must be set up by a basis person.
regards
Siggi

Can you delete ODS indexes before loading each time in Process Chain

Can you delete ODS indexes before loading eachin time in Process Chain and rebuild them just like a cube.And do you have to delete the indexes if its a daily refresh where data is deleted and a full update is done everyday.

Hi,
Are you using Secondary Indices on the ODS objects. I thought the Primary Index (which is also the Key Part of the ODS) is automatically updated during the Data Activation in the ODS. I am not sure if the Secondary Indicies are also automatically updated by the system.
Naga

The 0co_om_opa_6 ip in the process chains takes long time to run

Hi experts,
The 0co_om_opa_6 ip in the process chains takes long time to run around 5 hours in production
I have checked the note 382329,
-> where the indexes 1 and 4 are active
-> index 4 was not "Index does not exist in database system ORACLE"- i have assgined to " Indexes on all database systems and ran the delta load in development system, but guess there are not much data in dev it took 2-1/2 hrs to run as it was taking earlier. so didnt find much differnce in performance.
As per the note Note 549552 - CO line item extractors: performance, i have checked in the table BWOM_SETTINGS these are the settings that are there in the ECC system.
-> OLTPSOURCE - is blank
   PARAM_NAME - OBJSELSIZE
   PARAM_VALUE- is blank
-> OLTPSOURCE - is blank
   PARAM_NAME - NOTSSELECT
   PARAM_VALUE- is blank
-> OLTPSOURCE- 0CO_OM_OPA_6
   PARAM_NAME - NOBLOCKING
   PARAM_VALUE- is blank.
Could you please check if any other settings needs to be done .
Also for the IP there is selction criteris for FISCALYEAR/PERIOD from 2004-2099, also an inti is done for the same period as a result it becoming difficult for me to load for a single year.
Please suggest.

The problem was the index 4 was not active in the database level..it was recommended by the SAP team to activate it in se14..however while doing so we face few issues se14 is a very sensitive transaction should be handled carefully ... it should be activate not created.
The OBJSELSIZE in the table BWOM_SETTINGS has to be Marked 'X' to improve the quality as well as the indexe 4 should be activate at the abap level i.e in the table COEP -> INDEXES-> INDEX 4 -> Select the u201Cindex on all database systemu201D in place of u201CNo database indexu201D, once it is activated in the table abap level you can activate the same indexes in the database level.
Be very carefull while you execute it in se14 best is to use db02 to do the same , basis tend to make less mistake there.
Thanks Hope this helps ..

How to find process chain using background job in sm37

How to find process chain using background job in sm37

Better is to select the job.
Select (Define) Step (s) or F6.
Select the line and Menu Goto>Variant.
The variant contains the name of the CHAIN and its VARIANT.
Success
We faced an old job and via job monitoring we were informed about a cancelled job every 'interval'.
We noticed that the related chain was deleted but still the job was scheduled each interval again and was cancelled because an event was missing
We could not find the scheduled job via SM37.
Via view V_OP, view over tbtco abd tbtcp, we find the related entry.
We delete these entries via function BP_JOB_DELETE....
Edited by: Jack Otten on Jul 9, 2010 2:50 PM

Scheduling of process chain with background job

Hello All,
I have scheduled the process chains through background jobs. I have copied the meta chain and created seven background jobs that is from Monday till sunday. The problem is most frequently the job gets cancelled with the message
Process CHAIN, variant PAA1_GS001 is not scheduled waiting for event RSPROCESS 44NRPDWZ7CQUJ92ATDTY6368H.
This is the variant for the next process after the start process. I tried by giving merge active versions, but one day the background job runs fine , but the next day it gets cancelled.
If anyone has faced this issue before kindly let me know.
Regards,
Karthik.

Hi,
It seems to be there may be in probelm in Varients, so create a separate Varient for each PC and then activate the PC and execute.
Thanks
Reddy

ABAP program to add in the process chain before the attribute change run

Hi
I need a ABAP program to add in the process chain before the attribute change run(process) to avoid the locks, can any one send me the program
Regards,
Satish

I am not sure of any standard program .... but you can write your own... should be a small one..
you can check if the table RSDMDENQ has entry for your InfoObject... if yes, then its locked.. if not.. its not locked

Error in process chain creation : SET SCREEN not allowed in subscreens

Hello,
We are getting an Error in process chain creation : SET SCREEN not allowed in subscreens SAPRSSM 0100.
Please give a solution. Thanks in advance.
RR.

Just do detail view on in the process chain. It will take you to the error. See the message and then display message. You can know why the message is appearing.

Problem kicking off process chains using Tivoli Job Scheduling

In our pre-production BW system testing,when the process chains are being kicked off through Tivoli,they are not working.
We dont get issues when the chains are run directly in BW,without using Tivoli.
The jobs with 'after event' RSPROCESS setting that kick off next node on each node's completion,are not leaving out a 'copy' after a scheduled run.
So in the next run from Tivoli,the dependency job isnt there in scheduled status,which fails the chain.
We tried manually copying the dependency jobs on the nodes.Doing this,chain does kick off from Tivoli.But again jobs dont leave copies and next run from
Tivoli fails.We tried using 'periodic job' setting.This leaves copies of job.But then why is BW able to copy out and kick off jobs,while this isnt happening when kicked off through Tivoli.
A node in the process chain is BLUE when it has a scheduled job ready in sm37,but turns GREY(no scheduled job is there in sm37),once the Tivoli kicks off chains after the manual copy.
We suspect this either to be a authorization problem or an issue with how it works when kicked off through Tivoli.Process chain 'context' is somehow not created when it runs through Tivoli.
Anyone seen such an issue before?Suggestions are welcome..
cheers,
Vishvesh

Hi Manfred,
The chain does get kicked off from Tivoli.
But the job fails in Tivoli as..when it tries to hand over execution to the 1st local chain in the 'meta chain' the required job isnt there in scheduled status,with the 'after event' RSPROCESS dependency set on it.
cheers,
Vishvesh

How to identify whether that particular process chain is active or not?

Hi all,
How to identify whether that particular process chain is active or not ?
thanxs
haritha

If see the process chain then it will not be greyed out if it is active. Or else check in these tables.
RSPCCHAIN
RSPCCHAINT
to check the logs
RSPCLOGS
RSPCPROCESSLOG
Give the chain name and check in the object version.
Khaja

How to determine whether process Chain is active or Not

Hello Experts,
How to determine whether process Chain is active or Not, because i have large number of PC to activate.

Hi,
Please check this program in SE38---- /SSA/BWT
This program will give you information regarding all your process chains which are active and running based on there timings.
Hope it helps.
Regards,
AL

I was running Foxfire 3.6.9 and wanted to use FTP Program add-on and it did not appear to load but appeared but then would be installed but not run or appear under tools. So I deleted Foxfire 3.6.9 and down loaded to 3.5.9 so it could get FTP and it is do

I was running Foxfire 3.6.9 and wanted to use FTP Program add-on and it did not appear to load but appeared but then would be installed but not run or appear under tools. So I deleted Foxfire 3.6.9 and down loaded to 3.5.9 so it could get FTP and it is doing the same could not install. Even after I registered my copy. The last time I used this program it showed up under tools and worked great. any suggestions on whats going on and how I can get around this?.by ralphd3g

Delete the files extensions.* (extensions.rdf, extensions.cache, extensions.ini) and compatibility.ini in the Firefox [[Profiles|profile folder]] to reset the extensions registry.
See "Corrupt extension files": http://kb.mozillazine.org/Unable_to_install_themes_or_extensions
If you see disabled extensions that are not compatible on the next start in "Tools > Add-ons > Extensions" then click the "Find Updates" button to do a compatibility check.

Infopackage loads 0 record in process chain as BG job not running correctly

Similar Messages

Maybe you are looking for