Infopackage loads 0 record in process chain

Hi All,
I have scheduled a daily process chain for Purchasing.
The infopackage in the process chain loads 0 records and shows green status.
But when I load the data manually the infopackage fetchs the record form R/3.
Kindly help me on this issue.
Regards,
Indhuja

Hi Induja
It seems the info package which you have in the process chain is not working properly .
Just follow the following steps
Take the info package name which you used when your doing manual run include it in the process chain and remove the existing info package which is there in the process chain and as usual activate it and run it.
Hope its clear a little..!
Thanks
K M R
[Click here to know about KMR Experience|http://in.linkedin.com/in/kishoremadireddy]
Impossible --> I'M Possible
Winners Don't Do Different things,They Do things Differently...!
>
Induja Rajkamal wrote:
> Hi All,
>
> I have scheduled a daily process chain for Purchasing.
>
> The infopackage in the process chain loads 0 records and shows green status.
>
> But when I load the data manually the infopackage fetchs the record form R/3.
>
> Kindly help me on this issue.
>
> Regards,
> Indhuja

Similar Messages

BP daily load failed in process chain

Hi,
I am using process chains for daily loading of master data. I have an infopackage scheduled in that process chain named 0BP_DEF_ADDRESS_ATTR_INIT/DELTA_CRM01 (ZPAK_48WV8918R85SEUHG8N1IP6DJQ) . This infopackage is showing an error. When i diagnosed it says "Second attempt to write record '0030368557' to /BI0/PBPARTNER was successful"
And during error analysis i found this is causing the error.
Has anybody come across this error? How to correct this?
Appreciate your valuable responses.
Thanks
Ashok

Thanks.
I deleted the request on Requests tab. However the request still runs on the reconstruction tab and when i manually try to do a delta load it says the last load is not finished yet.
Could you please suggest?
Thanks

How to load hierarchies using process chains

Hi ,
Can any one please explain the steps for loading hierarchies using process chain.whenever i drag the hierarchy infopcakage Save variant is also coming by default,so do we need to have different SAve variant for different hierarchy infopackages or can we have one save variant for all the hierarchy variables.
Thanks,
Vaka

Hello Veka,
How r u ?
Yes ! SAVE Variant & Attribute Change Run will add up while loading the Hierarchy InfoPackage.
Provide the InfoObject Name for which u r loading the Hierarchy in the SAVE variant and SAVE it. The same will be transferred to the Attribute Change Run also.
If u r creating the Chain with more InfoPackages then have the Save Variant & Attribute Change Run at the last.
Best Regards....
Sankar Kumar
+91 98403 47141

Data Load Requirement through Process Chain

Hello All,
I have implemented an area through a custom data source and following is my data load requirement through Process Chain. Request you to kindly help me for the same.
1. The design is an InfoCube and updated using a Transformation through the custom data source.
2. For the entire year 2008 I want a single request to be loaded. So it gets loaded into the PSA and then into the Infocube through a (Delta) DTP.
3. Now, I have created an InfoPackage (Full Update) with year as 2009 in the selection. Tht is I want tht hencforth the data load should be for the year 2009.
4. Hence, the Infopackage will run to bring the 2009 data into PSA and I run the (Delta) DTP to update the same in the Cube.
5. Now, what i require is everyday the InfoPackage (Full Update) with 2009 should run and bring data into PSA. and the same should be updated in the InfoCube after deleting the 2009 request already present keeping 2008 request loaded previously intact.
I hope the above is nt confusing.
Please let me know if i can elaborate the same.
Thank you.
Regards,
Kunal Gandhi

Hi,
Please go through the links.
http://help.sap.com/saphelp_nw04/Helpdata/EN/21/15843b74f7be0fe10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw04/Helpdata/EN/f8/e5603801be792de10000009b38f842/frameset.htm
http://help.sap.com/saphelp_nw04/Helpdata/EN/b0/078f3b0e8d4762e10000000a11402f/frameset.htm
These may help you in designing the process chain as required.
Regards,
Sunil
Edited by: sunil kumar on Apr 17, 2009 6:20 PM

Infopackage loads 0 record in process chain as BG job not running correctly

Hi Experts,
I have scheduled a daily process chain for Purchasing.
The infopackage in the process chain loads 0 records from R/3 and shows green status but data is available in R/3. Its a FULL update.
But when I load the data manually the infopackage fetchs the record form R/3.
When I checked the background job in R/3 that loaded 0 records, the job gets finished abruptly without fetchig any data.
Please find the job log below:
Job started
Step 001 started (program SBIE0001, variant &0000000210024, user ID RFCUSR)
DATASOURCE = ZPUR_S600
         Current Values for Selected Profile Parameters               *
abap/heap_area_nondia......... 0                                       *
abap/heap_area_total.......... 0                                       *
abap/heaplimit................ 40894464                                *
zcsa/installed_languages...... ED                                      *
zcsa/system_language.......... E                                       *
ztta/max_memreq_MB............ 2047                                    *
ztta/roll_area................ 3000320                                 *
ztta/roll_extension........... 2000683008                              *
Job finished
But the background job for the request when I run the infopackage manually calls a function BW_BTE_CALL_BW204010_E (BTE) and fetches the record from R/3.
Please find the job log that fetches the record when run manually.
Job started
Step 001 started (program SBIE0001, variant &0000000210036, user ID RFCUSR)
DATASOURCE = ZPUR_S600
         Current Values for Selected Profile Parameters               *
abap/heap_area_nondia......... 0                                       *
abap/heap_area_total.......... 41230008320                             *
abap/heaplimit................ 40000000                                *
zcsa/installed_languages...... DE                                      *
zcsa/system_language.......... E                                       *
ztta/max_memreq_MB............ 2047                                    *
ztta/roll_area................ 3000000                                 *
ztta/roll_extension........... 2000000000                              *
Call customer enhancement BW_BTE_CALL_BW204010_E (BTE) with 26,596 records
Result of customer enhancement: 26,596 records
Call customer enhancement EXIT_SAPLRSAP_001 (CMOD) with 26,596 records
Result of customer enhancement: 26,596 records
Asynchronous send of data package 000001 in task 0002 (1 parallel tasks)
Call customer enhancement BW_BTE_CALL_BW204010_E (BTE) with 26,596 records
Result of customer enhancement: 26,596 records
Call customer enhancement EXIT_SAPLRSAP_001 (CMOD) with 26,596 records
Result of customer enhancement: 26,596 records
Asynchronous send of data package 000002 in task 0004 (1 parallel tasks)
Call customer enhancement BW_BTE_CALL_BW204010_E (BTE) with 1,062 records
Result of customer enhancement: 1,062 records
Call customer enhancement EXIT_SAPLRSAP_001 (CMOD) with 1,062 records
Result of customer enhancement: 1,062 records
Asynchronous send of data package 000003 in task 0006 (1 parallel tasks)
tRFC: Data Package = 000001, TID = , Duration = 000001, ARFCSTATE =
tRFC: Start = 20110217 054648, End = 20110217 054649
tRFC: Data Package = 000003, TID = , Duration = 000000, ARFCSTATE =
tRFC: Start = 20110217 054652, End = 20110217 054652
tRFC: Data Package = 000002, TID = , Duration = 000001, ARFCSTATE =
tRFC: Start = 20110217 054651, End = 20110217 054652
Job finished
Kindly help me on this issue as why the job run through process chain is not fetchibg any records.
Regards,
Indhuja

Hi Prasanth,
If the background jobs are not availbale when IP is triggered then the BG job will ot be executed and the IDOCs will get struck.
Once we push the IDOc only the BG job will be executed until then the PC will wait with yellow status.
Hence this is not the issue with the non availability of BG WP.
Also for last one week this issue was happening but today the job executed successfully through the Process chain itself.
Then it shows this is not the issue with PC also.
The job is executed using RFCUSR.
Please suggest what would be the possible cause for this issue.
Regards,
Indhuja
Edited by: Induja Rajkamal on Feb 23, 2011 11:48 AM

Delta load problem in process chain

Hi,
I have ODS givng data to another ODS. The init of this flow was done manually...Now i have created process chain in which further processing has variant as "execute infopackage" as the delta package made .. now when i check this process chain its giving me error ""Delete init. request
REQU_49LKNGG0SE5966D3S7SQYYDQX before running
init. again with same selection"" .. Actually this is not the Init req which i ran manually..this is the req which was run when i ran this process chain... what shld i do to add only delta IP in process chain so that i dnt ve to delete init
Thanks
Prashant

hi,
first load all the init loads from the ods to cube. then u have to create the delta infopack and include that in the chain.
create the int info pack under the infosource 8<ods name>
trigger that infopack, create the delta infopack under the 8<odsname> infosource , and you have include that in the PC.
Please do changes in your process chain.
Local chain 1 - start -> load to ods -> activation of ods ->further processing(remove the infopack in this process maintain variant).
Lcoal chain 2 - start -> delete index ->load delta to cube -> create index -> roll up (if needed)
Main chain -> start -> local chain 1 ->local chain2
Ramesh

Infopackage laoding scheduled in Process Chain and events involved

Hi BW-Experts,
Till now I was loading a infopackage normally and it had an subsequent event. Now if I schedule this infoapckage in process chain will it raise event after the load finishes.
Thanks
Arun Purohit

Its BW 3.5
in it when we go into infopackage we get options like..
Scheduling Options
Subsequent Processes
in subsequent processes we can tick on chk box for triggereing event.......
if I load this infopackage without Process Chain then it will raise event after load finishes....
my query is?
will this infopackage raise event if I Schedule it thru Processs Chain after load finishes..
Edited by: Arun Purohit on Jan 16, 2009 2:24 PM

2 Infopackages missing after installing Process Chain BI 7.0 TechContents

Hi,
I have installed the process chains for BI 7.0 Technical Contents and when trying to run a check on the process chains, I got an error on these 2 infopackages which were not installed from the BI 7.0 technical content packages:
0PAK_472D695A0ZS3DWVBA4H1OO9A6
0PAK_472D4SFZXKU0L9FF8UESP72F2
Anyone know if these 2 infopackages are needed and if yes, where are these infopackages loading data to?
Thanks,
Anthony

Please upgrade the system to SAP_BW SP16
There is a work-around for activating these two process chains if you don't want to upgrade the SP Level to SP16.
Apply SAP Note No. 989927 and run the installation report RSTCC_ACTIVATEADMINCOCKPIT_NEW. Please follow the manual steps mentioned below.
Please execute the transaction RSPC (Network Display). Change to 'Edit' mode. Go to the Main Menu. Double-click on Query Runtime Statistics - Init (0TCT_C0_INIT_P01) and right-click on 'Load Data (0TCT_DSA1_INIT_DATAMART)' and select 'Remove Process' option in the Context Menu. Repeat the same procedure for the subsequent process 'Create Index (Generated from Loading 0PAK_472D4SFZXKU0L9FF8UESP72F2) and remove the links related to it as well. Then Activate the Process Chain 'Query Runtime Statistics - Init (0TCT_C0_INIT_P01)'.
Go to the Main Menu. Click on Query Runtime Statistics - Delta (0TCT_C0_DELTA_P01) and right click on 'Load Data (0TCT_DSA1_DELTA_DATAMART)' and click 'Remove Process' in the Context Menu. Remove all links leding to it as well. Then Activate the Process Chain 'Query Runtime Statistics - Delta (0TCT_C0_DELTA_P01)'.
Then Schedule the Process Chain 'Query Runtime Statistics - Init (0TCT_C0_INIT_P01)'. This will take care of the Process Chain 'Query Runtime Statistics - Delta (0TCT_C0_DELTA_P01)' as well.
Note 1134944 - BIAC: Problem in Process Chains BI_CONT SP8, SAP_BW < SP16
Hope it Helps
Chetan
@CP..

"URGENT"Infopackage load error in process chian after upgrade

Hi Gurus,
We have a strange issue in one of the process chain after upgrade from 3.5 to NW 2004s. In a process chain we have 5 info packages, 3 in parallel as they load data in 3 different cubes and 2 in series after successful completion of info packages on top.
Now the process chain shows red info package with error message Last delta upload not yet completed. Cancel
When we check the RSMO, we find all the 3 loads on top finish successfully while in process chain log display as error at info package with above error message and process chain never advances. Actually loads finish successfully but process chain shows error in info package.
When we investigated further, the request ID in failed info package in process chain shows different ID which never loaded in cube but data load takes place successfully using different request ID(checked in RSMO and request in cube).
I suppose the process chain trigger the info package load twice simultaneously, one load get successful and second load request failed in log as first one is runningthis is my guess
Please help me as this is an urgent issue.
Regards,
Anil

Hi All,
We fond the root cause of the error message. Actually when we trigger the process chain, the info packages loads get triggered twice after an interval or around 2 minutes.
Here if zero records are loaded then second request ( after 2 min) get loaded too with zero records but if first request is loading some records then second request will find the data load still running and will throw error as last delta still not finished.
Have you seen this scenario before?
Regards,
Anil

Updated no of records through process chain

We are executing an iP and we want to add a message through email in the IP ,if it is success or fail and also is it possible to update the no of records that are updated in the iP in the same email...
We are using BW 3.5 version..

Hi Prince,
Kindly have a look at below links,
Process Chains - number of records loaded in various targets
Message Alret through Process Chain
Hope this helps.
Regards,
Mani

Loading simultaneously several process chains

Is it recommended to load fiscal year 1, fiscal year 2, fiscal year 3, fiscal year 4, etc. at the same time using process chains ALEREMOTE?
What are the consequences that would cause to the system if several process chains are laoded simultaneously to 1 InfoCube?
There are millions of records coming from the DSO for each fiscal year.

Hi Yosemite,
It is a good option to load data parallely into same target, when the selection criteria is different. But please ensure that number of parallel processes in each info package/DTP are restricted to sustain parallel loads in the system.
For DTP this setting can be enabled from Goto->Settings for batch manager.
Regards,
Vikram

Flat file data loading error using process chain

Hi SAP Experts,
I am having a problem loading the flat file data to the cube using process chain. The issue is that when i run the process chain it fails giving the message " Date format error, please enter the date in the format _.yyyy" . I am using " 0calmonth in the datasource" . Strange is that when i manually execute the infopackage, i dont get any errors and am able to load the same file successfully to the dso and the cube. Is there any special setting for the process chain that i am missing?
The date format in the flat file is mm/yyyy. I have tried all the options i could including recreating the datasource and invain dont see any success so far. please help me solving this problem as we r in the middle of testing cycle.
Thanking you all for your quick response and support all the time.
Kind Regards,
Sanjeev

Hi Sanjeev,
I believe you are opening the .csv file again after saving it. In this case the initial 0 in single digit month (say 02/2010) is getting changed to 2/2010 and the resulting file is not readable to the system. Just do not open the file after you have entered data in the .csv file and saved and closed it. If required, open the file in notepad, but not in excel in case you want to re-check the data.
Hope this helps.
regards,
biplab

Initialization of delta loads possible with process chain?

hello all,
followed situation:
i load data from file and sap extractor to ods 1. from this ods i have an automatic delta load to another ods 2, where the data are filtered and aggregated.
its possible that some of the data change their state from filtered out to in but are not in ods 2 because of the earlier criterias they had have. now i want a weekly load (initial load) from ods 1 to ods 2 and a daily delta load if new data arrived ods 1 to the no 2.
i tried to create a process chain for that but i cant! i cannot use the info package for the initialization of the load from ods 1 to 2 because it is generated info package. and if i use the process "update ods object data" there is always tried to make a delta load! at first step i delete all data of ods 2, so i need an initialization with data as next step.
how can i do what i want?
thanks for any idea
Frank

Hello Tom,
ok, i understand but i dont know how...
The only way i know to create an InfoPackage between ODS is to use "Update ODS Data in Data Target" of the context menu of an ODS. Then i chose between full/delta/init load and the infopackage will be generated. How else can i create it?
Frank

Data load Error using Process chain

Hi,
In NW2004s when I schedule delta loads for 2LIS_11_VAITM using process chains, when there is zero delta, the manage screens of the infocubes show green light with zero records correctly whereas the process chain log display shows red. The details of the process monitor show zero records. Is this right? I assume that even if there is zero delta, the log must show green and all the subsequent processes like activation of ODS, deleting of PSA, construction of indexes must be carried out. Please confirm. Is this a bug?
Thanks.
Param

Hi Victor,
Can you please advice how you solved issue as we are having similar issue where it works fine when loaded manually but throws communication error when process chain runs, following is error message..
Communication error: call FM RSSDK_DATA_REMOTE_GET
Thanks in advance for your help!!
Sandeep

Steps for master data loading by using process chain

Hi
I want to load the Master data by using the process chain . Can anyone tell me the step-by-step method for loading the master data .
I means what are the processes should i need to include in the process chain . Pls tell me in sequenece .
i ll assing the points
kumar

Hi,
The process os loading master data is similar to transaction data in terms of using the infopackages.
First you have to load Attr followed by texts and hierarchy.For master data you have to include the process type called as Attribute change run.This can be included as a separate process type or using the AND process.
Hope this helps.
Assign points if useful.
Regards,
Venkat

Infopackage loads 0 record in process chain

Similar Messages

Maybe you are looking for