Infopackage time dependant data fixed time interval

Hi,
I have issue with infopackage. When I tried to load the master data attribute itu2019s not loading the changed data.When I checked the infopackage it has update tab and in this time dependant data section,it was marked as fixed time interval.The changed data in R/3 actually falls under the interval what was entered in the fixed time interval period.But it was not extracted.
I found that if we enter the exact specific dates interval in the fixed time interval,it fetches data.But we canu2019t enter each dates interval for all changed data in R/3. It needs to fetch all the data.When I try to remove the fixed time interval,it is not allowing as it is mandatory field.
Please suggest me how to fetch all the records for time dependant data.I tried other options like routine and variables.But it doesnu2019t work and it is fetching data only if we enter the exact dates interval.
Regards,
Ramana

There is nothing to do with PL/SQL.
You can refer below links:
http://www.lc.leidenuniv.nl/awcourse/oracle/server.920/a96524/c12parti.htm
http://www.stanford.edu/dept/itss/docs/oracle/10g/server.101/b10739/partiti.htm#i1006727

Similar Messages

Time dependent data load to BW using Fixed Time Interval selection

Hi,
I'm facing a problem in extracting time-dependent master data to BW. I would really appreciate if anyone can help in this regard.
We have a table in R/3 which has time-dependent data. For example, for a single OBJID we could have multiple records with different BEGDA/ENDDA and different attributes. When we try to load this data into BW InfoObject, we see a time-dependent data selection in update tab of infopackage. We need to select BEGDA/ENDDA in datasource since otherwise during loads we would get a "DUPLICATE RECORDS" load error in BW.
The problem is when we enter a Fixed-time interval Start Data and End Date in the InfoPackage, only the records with that StartDate and EndDate are loaded. Ideally I would want to see all the records whose BEGDA/ENDDA falls in the range of StartDate and EndDate.
I tried modifying the ROOSFIELD table for the data source. I made the BEGDA SELOPTS as GE(16) and ENNDA SELOPTS as LE(64). But still it doesn't seem to work. I checked if the change to ROOSFIELD has any affect in RSA3. Unless we give a range for BEGDA it doesn't seem to behave as expected. Could someone let me know how I can load all records to BW whose BEGDA/ENDDA fall in the range of StarteDate and EndDate.
Thanks,
Anil.

Anil,
If you are using a custom dataSource, make sure the dataSource fields for begda and ennda are labeled "datefrom" and "dateto".
Cheers,
T-

Time-Dependent Data in InfoPackage

Hi, Experts,
I tried to load CO Master Data from R/3, I got some issues as follow:
1. In the InfoPackage creating, what is the meaning of Time-Dependent Data, How can I know what are the properly value range I should entry.
2. After I excuted the Infopackage, I got red color in Monitor, I checked the PSA, some of the data's status were green, some were red which the system said that the records time overlapped, but I couldn't verify this is true anymore. Could you please give me some idea?
By the way , does any body have the documents associated with BW-SD including extraction, Business Content and query design. Thanks a lot

Hi Ryan,
Time-dependent data means data varies from time to time. For example one employee may work in US from Aug - Feb and in Canada from Mar - Jul. Then to maintain such data you have to declare them as time-dependent.
Time-dependent data has date-from and date-to fields. In your case the date-from and date-to have multiple entries thats the reason for the error.
Bye
Dinesh

Restriction of Time-dependent data (Cost Center) according to a specific role

Dear experts,
Has some one of you implemented a functionality to restrict Time-dependent data (for example, Cost Center) edition, according to a specific role assigned to an End user?
I imagine it is possible, but we should develop an User-exit in order to get this goal.
Let your comments here if possible, so that I can argue with my End user. I will try to give you points if you help me with this query.
Thanks & Kind Regards,
Daniel.

Hello All!
We have talked to Authorizations specialist and he indicated a customizing transaction in FI-AA module called ANSICHT (IMG -> Financial Accounting -> Asset Accounting -> Preparing for Production Startup -> Authorization Management -> Process Asset Views). In this customizing, it is possible to edit an existing asset view and turn on/off fields according to the company needs.
Afterwards, you should request some adjustment in the roles that contain the A_A_VIEW authorization object.
I am considering this question as "assumed answered'.
Regards,
Daniel

0EQUIPMENT: Attribute 0ABCINDIC is time-dependent (cannot become time indep

Hi,
Kindly suggest me in this issue. I've an infoobject ( 0EQUIPMENT ) in all three servers ( Dev, Qual, Prod ). Its inactive in Quality. But all the settings and other properties are same in all the 3 servers. When i tried to activate the object and move to quality it throws the foll error in the transport, mentioning for all the attributes of this infoobject. I haven't enabled the checkbox to make the attributes as Time - Dep.
The erorr is faced : Char. 0EQUIPMENT: Attribute 0ABCINDIC is time-dependent (cannot become time-independent)
Simillar kind of errors are throwed for all attributes exist in this infoobject.
Please do afford your effort.

Hi Balaji,
Got any clues over..?
i tried explicitly to change the attributes into Time - Dep, but says that Date From and To can't be used in Attribute list. As i mentioned in my prev post, all properties / options / tabs / boxes..are similar in Dev, QUA, and production. And i wonder how the object gets inactive in QUA but active in Production.

Change to cost center in time dependent data. Can I rerun depreciation YTD?

I need to change the cost center in October (Period 10) Period 9 and prior are already closed. I thought that since I put the Interval for the new cost center as 1/1/11 that it might do and adjustment in October reversing the depreciation posted for the old cost center and put the YTD depreciation in the new cost center, but it did not. it only posted the current month depreciation to the new cost center. Is there any way to do this? Thank you very much.

Hi. Thanks for your reply. I went into the ABAA screen, but I am afraid to process this transaction because I do not understand what is going to happen. I cannot find any documentation that explains this. I have already changed the cost center on the asset and run depreciation. It posted the current month depreciation to the new cost center, but it did not make a correction to the prior periods. I am not creating a new asset, i just want to reclass the prior months depreciation (in the current year) to the new cost center. In case it will help I provide some details:
Asset acquired 5/1/11 Depreciation posted to Cost Center A From May - Sept $1,796.06 per month x 5 = $8,980.30
Before posting Oct depreciation, I went to Master Data - Time Dependent - and changed the cost center as of 1/1/11. So I now have two intervals: From 1/1/1900-Cost Center A, and From 1/1/11 - Cost Center B. I then ran the regular depreciation for Oct. It posted Oct Depreciation of $1,796.06 to the new Cost Center-Cost Center B. My total YTD depreciation is now $10,776.36, but it is split between two cost centers. I need to move the depreciation from Cost Center A to Cost Center B for the prior months. If it was a Journal Entry, I would do it as follows in the month of October, so my YTD numbers would be correct.
Debit Depreciation Cost Center B $8,980.30
Credit Depreciation Cost Center A $8,980.30
Then when I run my October numbers it would show zero depreciation in Cost Center A Year To Date (and negative 8,980.30 in month of October)
If i follow the steps you propose, what would be the result? Thanks so much!

Getting latest record from time dependent data in DSO

Hi folks,
I have a standard DSO that is built on top off a time-dependent object. Users don't need the daily history and the last entry of the month will suffice so we are only going to have 1 record per month at the most for the object. The standard dso object key thus contains the infoobject key and Calendar month which is derived from the 'From Date' of the infoobject.
The users will running queries on this dso based on the Calendar month. So for the months, where record is available - it is a simple query. But get te data for the month where data is not available.
Example:
Key           Month
123           Jan 2014
123           Jun 2014
So when the user runs the report for either of Feb/Mar/Apr/May 2014, the Jan 2014 record should show up.
For anything June 2014 onwards, the Jun 2014 record should show up.
Thanks for your suggestions!

To month should be a part of data fields lets understand the behavior roughly with the above quoted example.
Initial load to dso :
123           Jan 2014        Dec 9999
now change happens in master data new data record created with the to date fixed to 31.12.9999 and old record to date less than the from value of new record.Correct!
Next load from master data to DSO.
123           Jan 2014        May 2014
123           Jun 2014        Dec 9999
So what happened in this case that based on the employee and To month as key first record will get overwritten and new record will be appended as well.
And rest you can handle at BEx level.
Hope this works.
Regards,
AL

Need to understand HR Time-dependent data

Hi All,
I am trying to understand how time-dependent master data works with fact table/infocubes.
Suppose I have a simple cube with infoObject: 0EMPLOYEE, 0HRPOSITION. And the data are as follows:
0EMPLOYEE..............0HRPOSITION
300............................101
Futhermore, my 0HRPOSITION master data is time dependent with an attribute of 0FUND and the master data are as follows:
START-DATE....END-DATE.....HRPOSITION...FUND
01/01/2006........05/15/2006....101..................A
05/16/2006........12/31/9999....101..................B
And if I were write a query against the cube to show the Employee #, the Position #, and the Fund, I would expect the query result as follows:
300.....101....A
300.....101....B
However, my actual query result is only one row. Why?
Please any help will be much appreciated.
Thanks,
BQ

BQ,
Since it is timedependent master data, it will show only one record that active record.( because current system date will align with only one entry in 0HRPOSITION )
RC

Profit center Time dependent and other Time Dependent Master Data

Hello Friends . I ticked one of the attribute of 0Vendor -
Attribute = Profit center Time dependent. Now I get
Date To and Date From Field. I read that we need to set this in BI via routine. Can u Suggest the below
Date From Field = GO live Date
Question 1 : If I set Date To FIELD to be Month end like for oct 10/31/2007 and make a routine that will increase the Date To FIELD to November 11/30/2007. Will it spoil the load since I read in SAP Expert that we cannot have same date to field. But i guess we can have it, Like If i load it today Date to will be 10/31/2007 and tomorrow load will also have 10/31/2007 . so it will have monthly snap shots of master data
Question 2 : what is advisable if I create Daily snap shots of master data like Date To FIELD will be Loading Date . Will that logic in routine to create daily loading date set to Date To FIELD will overburden the system and make the system die in few months or it is ok. we will have about 12 fields which will be time dependent.
Question 3: If you have any routine that set Date To field please email me at [email protected]
Please help
soniya
null

Soniya,
If you really need to do it, Quarterly is a better option than monthly so that you can reduce the number of records in master data.
For the time stamp, you will have to write some code.
Since you are going to use 0PROFIT_CTR object, the business content on this is still based on the old data flow. You have multiple places to write this code. The best place is to create a transformation between your Infosource and the InfoObject. Once you have the update rule, you can write a start routine.
you have to populate the date from and date to field.
date to = first day fo the current qtr.
date from = last date of the current qtr.
to get the first date and last date you can use the following logic.
1. pass current date and fiscal variant to fm DATE_TO_PERIOD_CONVERT.
2. get the first period and last period from the output of 1. (for example, the current date is converted to period 003, and year 2007, then for this value the first period will be 001, and last period will be 003 and so on)
3. use fm FIRST_DAY_IN_PERIOD_GET to get the first date of the period.
4. user fm LAST_DAY_IN_PERIOD_GET to get the last date of the period.
If you don't know much abap, take help of abap developer.
-Saket

Master data records for time dependant data

Hi
In R/3. say master data has 1500 records. In BW, while loading this, i get the same number of records in monitor.
But when i check the maintain master data for this info object, I find each row being duplicated. The difference being the valid to and valid from date. The info object is time dependant.
So my question is: this adjustment done...is it ok continuing forward or do we change something now so that i dont see duplicate rows?
Thanks in advance
AR

hi,
everything is ok here (I assume you have timeframes for e.g.: 01.01.1000 - 27.12.2005 and 28.12.2005 - 31.12.9999).
If you are working on developement system now - change something time-dependent in your master data tommorow (in your source system) and extract delta. Two new periods will be created and you will have 3 records, e.g.: 01.01.1000 - 27.12.2005 , 28.12.2005 - 28.12.2005 and 29.12.2005 - 31.12.9999.
Regards,
Andrzej

Extract Time from date and Time and Need XLMOD Funtion to find the Difference between Two Time.

X6 = "1/5/15 5:16 AM" & NOW ....................difference by Only Time
not date
X6 date and Time will be changing, Its not Constant
Dim myDateTime As DateTime = X6
            Dim myDate As String = myDateTime.ToString("dd/MM/yy")
            Dim myTime As String = myDateTime.ToString("hh:mm tt")
            Dim myDateTime1 As DateTime = Now
            Dim myDate1 As String = myDateTime1.ToString("dd/MM/yy")
            Dim myTime1 As String = myDateTime1.ToString("hh:mm tt")
Need to use this function to find the Difference between Two Time. due to 12:00 AM isuue
Function XLMod(a, b)
    ' This replicates the Excel MOD function
    XLMod = a - b * Int(a / b)
End Function
Output Required
dim dd = XLMod(myTime - myTime1)
Problem is myTime & myTime1 is String Need to convert them into Time, Later use XLMOD Funtion.

Induhar,
As an addendum to this, I thought I'd add this in also: If you have two valid DateTime objects you might consider using a class which I put together a few years ago
shown on a page of my website here.
To use it, just instantiate with two DateTime objects (order doesn't matter, it'll figure it out) and you'll then have access to the public properties. For this example, I'm just showing the .ToString method:
Option Strict On
Option Explicit On
Option Infer Off
Public Class Form1
Private Sub Form1_Load(ByVal sender As System.Object, _
ByVal e As System.EventArgs) _
Handles MyBase.Load
Dim date1 As DateTime = Now
Dim date2 As DateTime = #1/1/1970 2:35:00 PM#
Dim howOld As New Age(date1, date2)
MessageBox.Show(howOld.ToString, "Age")
Stop
End Sub
End Class
I hope that helps, if not now then maybe at some point in the future. :)
Still lost in code, just at a little higher level.
Thanx frank, can use this in Future....

Where can I find the current time and date of Time Capsule?

I have a home network consisint of 2 x Time Capsules and 1 x Airport Express. All is working fine. I would like to set up access control for one machine connecting to the network and I can see I can do this under Access Control on the Airport Utility. My question is where can I find the current time and date setting for these devices?
I can set them to use the time.apple.com server to set the time automatically, but I can't find where to see the current time and date of the device. The only place I can see reference to the time and date is on the logs and statistics under the Advanced tab of the AirPort Untility.

I don't think you can change the time and date on the TC itself, it just connects to a time server (and you set your own time zone).

Seperating time and date from time stamp

Hai,
Can somebody tell me how time and date are seperated from a time stamp with format like 12/01/2006 1:21:36
I want 12/01/2006 in one object and 1:21:36 in another object.
Also as BW takes only format YYYYMMDD, does having 12/01/2006 make any difference? If yes then how can I convert this?
Thank you.

Hi Visu,
For converting date check these:
Re: Date Conversion in Flat File
Bye
Dinesh

Day and Time vs Date-Day-time

I currently have Day and Time showing in the top right of my desktop.
I want to have Date Day and time showing.
Is that possible, and how do I get it?
thanks

Hi
You could jump in the deep end and try this out.
This user tip explains how; Tip — Date and Time in the Menu Bar by Michael Conniff
This works for Leopard as well.

My iPod 5thG don't work, it turns off all the time, the date and time is other, and I can't connect to the Wi-Fi

Please I need help my iPod is not working I have problems for the internet, the date and time is other like if today is March 9,2014 and the time is 9:44 Pm it tells me that is March 11,2014 and the time 3:15 Am! And it turns of all the time!

- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Infopackage time dependant data fixed time interval

Similar Messages

Maybe you are looking for