InfoPackages Missing in Project Systems Business Content

Hi all,
Just installed PS business content in a BW 3.5 system. Cubes, ODS's, etc are all OK. But should there be InfoPackages supplied?
Thanks!
Gerry.

Gerry
Welcome To SDN
Usually we will create our own info Packages based on our requirements like what cubes or ODS it should load also it is Delta/init/full. All these settings could be done in our info Packages based on our requirements.
Hope this helps
Thnaks
sat

Similar Messages

Project Systems Business Content - Residual Order Plan

Hi all,
I a issue which I hope someone can help me with:
I am lodading data into cube 0PS_C08 and then into 0PS_C04 as per the BC. When I view the BC restricted key figure "residual order plan" i get nothing (blank).
I look in R/3 I have values for residual order plan. I have looked at the Help on SAP and they say there is some config that needs to be done in SPRO. I dont really understand what config needs to be done can someone help?
Many thanks,
Leo

Hi,
We are searching for project versions(project systems) business content :
Base tables :
VSAFVC_CN     Version: Operation in order
VSAFVV_CN     Version: Quantities/Dates/Values in order operation
VSAUFK_CN     Version: Order master data
VSEBAN_CN     Version: Purchase requisition
VSEBKN_CN     Version: Purchase requisition account assignment
VSJEST_CN     Version: Individual status per object
VSJSTO_CN     Version: Information on status object
VSKBED_CN     Version: Capacity requirement records
VSKBEZ_CN     Version: Additional data for table KBED (ind. capacities)
VSKBKO_CN     Version: Capacity requirements header for an order
VSKOPF     Version: Header - general data for a version -
VSKPER_CN     Version: Workforce Planning
VSMLST_CN     Version: Milestone
VSNPTX_CN     Version: PS texts (network)
VSPRHI_CN     Version: WBS, edges (hierarchy pointer)
VSPROJ_CN     Version: Project definition
VSPRPS_CN     Version: WBS element (work breakdown struc. ele.) mast. data
VSPRTE_CN     Version: Scheduling data for project item
VSPRTX_CN     Version: PS texts (WBS)
VSPSTX_CN     Version: PS texts (header)
VSRPSCO_CN     Version: Cumulation table for project reporting
VSSTEU     Version: Control table - one entry per version object -
I didn't find any relevent business content for above tables.
If anybody extracted these ,please let me know where and how they extracted.I will assign points.
Thank you,
GSR

Project Systems - Business Content

Hi,
We are trying to install Project Systems Business Systems. We are in process of creating technical specs.
In the help.sap.com or best practices ,There is no detail explanation is available (Source field,source table or logic to get the field).
Some of the data sources don't have documentation.
I hope many of you implemented Project Systems.
Please share your experiences about finding Source fields and tables.
Please share the documents : [email protected]
Thank you,
GSP
Thank you,
GSR

Hi,
We are searching for project versions(project systems) business content :
Base tables :
VSAFVC_CN     Version: Operation in order
VSAFVV_CN     Version: Quantities/Dates/Values in order operation
VSAUFK_CN     Version: Order master data
VSEBAN_CN     Version: Purchase requisition
VSEBKN_CN     Version: Purchase requisition account assignment
VSJEST_CN     Version: Individual status per object
VSJSTO_CN     Version: Information on status object
VSKBED_CN     Version: Capacity requirement records
VSKBEZ_CN     Version: Additional data for table KBED (ind. capacities)
VSKBKO_CN     Version: Capacity requirements header for an order
VSKOPF     Version: Header - general data for a version -
VSKPER_CN     Version: Workforce Planning
VSMLST_CN     Version: Milestone
VSNPTX_CN     Version: PS texts (network)
VSPRHI_CN     Version: WBS, edges (hierarchy pointer)
VSPROJ_CN     Version: Project definition
VSPRPS_CN     Version: WBS element (work breakdown struc. ele.) mast. data
VSPRTE_CN     Version: Scheduling data for project item
VSPRTX_CN     Version: PS texts (WBS)
VSPSTX_CN     Version: PS texts (header)
VSRPSCO_CN     Version: Cumulation table for project reporting
VSSTEU     Version: Control table - one entry per version object -
I didn't find any relevent business content for above tables.
If anybody extracted these ,please let me know where and how they extracted.I will assign points.
Thank you,
GSR

New Cubes in Project System Business Content

Hi
I am going through the business Content Help. We have standard Cubes like 0PS_C02 for dates 0PS_C04 for Controlling, 0PS_C07 for Claims and so on
Also I see new cubes 0PS_C021 with different description Dates ( Identification using GUID) and 0PS_C041 FOR Controlling (Identification using GUID) and so on.
My question is what for these new cubes with Description Identification using GUID.
Thanks
Satish

Hi Satish,
I believe the 0PS_C041 , 0PS_C021 are the used when you create projects in R/3 using cProjects or xRPM. When you create a project in cProjects and replicate it, a corresponding project is created in R/3 which is identified by a 24 character String(this is the GUID). And the cubes 0PS_C041, 0PS_C021 in BW.... are used to store such projects information.
Hope this helps!!!
Rajesh.

Missing Info Objects in Business Content

Hello,
the business content of our system has missing IO. For the Bank Analyzer there are missing 3 IO which are used for the cube etc.(IO are S20BPART,S21DFVAL, S40FTRAN).
For me is this problem new and I want to now if anybody has experience with this type of problem. On oss I could not find anything, so what could be the reason
Thanks
Henning

Hello Henning,
We had the same problem with BC 7.03. I guess it was support package 5. We had to open a customer message and got a corrected version which became part of the next support package.
Kind regards,
Stefan
PS: Of course it were different InfoObjects. In our case it was something related to Production Planning.

Missing datasources when installing Business Content

Hi All
We have a requirement for a number of SBC infoproviders (BI7/ECC6) which are new to us.
The majority we have installed successfully but we are having problems with 0SLL_C01 / C02 and C03 which relate to Customs and 0BVTSD02 which is a Telephones Sales Acitivity DSO from the Beverage Industries area.
We have 'successfully' installed all the data flows down to the infosource level but none of the datasources were installed.
On re-checking in our source system RSA5/RSA6 we realised there were no datasources available for these infosources.
How do you add business content datasources to your source system so they are available? or have we missed a process?
Thanks
Jerry

Hi Jerry,
The Datasource you are talking about is related to release of SAP GTS 3.0 pack.
So please check with you basis team whether they have installed this plug-in in your source system.
If these release /plug-in are not installed in your sourcce system you wont be able to finf it in the RSA5/RSA6.
Thanks and Regards
Arun

Missing Info Objects and Business Content in IDES ECC6 with BI7.0

Hi All,
I do not see most of info objects like 0COMP_CODE, 0BUS_AREA, 0RESP_PERS etc. and lot of objects missing in Business Content too.
I have IDES ECC6 with BI7.0.
Could someone please help me to retrieve those objects.
Thanks.

Hi Kishore,
Thanks for the info. I am little confused. I thought i had full BW in my ECC6. What is the difference between ECC6.0 with BW and ECC6.0 with BW/BI7.0? BI7.0 has all business contents in it?
The IDES software has BW/BI 7.0 in it. That is what the person whi gave me told me. How can i verify that?
I have some knowledge of BW and i am trying to learn this new BW 7.0 on my own. Since it does not have BI content how can i proceed to learn on my own.
Please help. Thanks.

Rejected Orders in Standard Business Content 2LIS_13_VAITM to 0SD_C03

Hello Folks,
My (new) employer has implemented standard business content for SD (VAHDR, ITM, etc.), and we are trying to reconciile data to ECC.
We are running Netweaver 2004s (BI 7.0) with very recent ECC.
It seems that 'rejected orders' still reflect the original 'incoming orders value' in ZSD_C03_Q009 Query.
I can see the rejected reason in PSA, InfoSource, and transfer structure, but not shown in Update Rules from InfoSource to 0SD_C03.
I would have thought that this is standard functionality in SAP, and doesn't require any 'enhancements' to deal with it. Howeveer, if enhancements are required, has anyone done this, and how do you deal with rejects that happen in a different period from the order creation?
Am I just missing something in standard business content?
Many Thanks for any assistance you can provide.
Regards,
Martin.

Hi,
Please check the record mode in the DSO for those records.
Please check the OSS :
http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_bw_bct/~form/handler%7b5f4150503d3030323030363832353030303030303031393732265f4556454e543d444953504c4159265f4e4e554d3d373131373530%7d
-Vikram

Business Content Project System

Hi Friends,
Can any body provide the link for Businees Content for Project System module in BI 7.0?
will assign the points.
Thanks in advance.
Regards
SAP

thanks for ur reply. i assigned the points.
I can see lot of Infocubes are duplicated like
Dates (Identification Using External ID) and Dates (Identification Using GUID)
Earned Value (Identification Using External ID) and Earned Value (Identification Using GUID)
what is the diffrence bet ween External ID and GUID.
Cleint will use two types oe he can choose either of one?
Please provide some use ful documents PS Extrators.
I have been assigned to PS Module in BI 7.0
I am extractind data from PS module.
Is there any diffrences extracting data from Ps system compare to LO and FICO modules.
Will assign the points.
Thanks in advance.
Best regards
SAP

Business Content for Bill Up transaction in CRM system

To all Experts,
I'm currently working on a project that requires Bill Up transactional data ( Source Table: CMSD_BU ) to flow from CRM to BW system. I'm looking for Business Content that can fulfill this requirement. However, till to date, I couldn't find any information of such Business Content. I'm not sure if such BC exist. Can anyone help if you have experience implement this data flow?
When searching for the DataSource / Extractor, I found BW Extract Structure CMST_BU_BW and CMST_BU_BW_C in the CRM system. But couldn't find any DataSource for both extract structure. Not sure if we need to install any support pack in order make the BC available in the system. Please help if you have any idea.
Thanks in advance.
Regards,
Hui Pin

Hi Shalini,
The document is replicated from ECC to CRM without any errors.
For this document I just want to create follow up transaction in CRM.(I dont want to change the document in CRM)
The follow up transaction is in display mode. this is my problem.
Hi Rekha:
I have done following setting in CRM to create follow up transaction in CRM for the document which is replicated from ECC to CRM.
1)     Defined the Copying Control for Transaction type
2)     Defined Copying Control for Item categories
3)     Defined Item category determination when copying
Thanks in advance,
Regards,
-Rahul.

Source System Assignment while Installing Business Content

Hi,
I have a new R/3 source system in BW (one R/3 system already exists). When I'm installing business content for say an Infosource and before, even with a succesful install , the new source system assignment is not taking place in the infosource and neither are the packages (for the new source system) being installed. The datasource (for the new source system) remains unassigned.
Please Advice
Thanks

Hi Shurobhi
with your new R/3 source system are you able to see the datasources - using right clik on source system & then select datasources overview. IF not then you need to check if the source system connection is done with metadata repository replication or not. If that is also done then ensure that you have installed all business content datasources using RSA5 in your R/3 system.
On BW side, while installing transfer rules and infopackages, make sure that this new R/3 source system is checked on in source system Box - X icon on business content screen. Then only you would be able to see transfer rules and infopackages & install them.
Hope this helps
Regards
Pradip

Business content for standard component is missing in BW

In a new BW implementation project what I have done is
1) activate all datasource in R/3
2) Replicate datasource in BW
3) Activate infoobject in business content.
The problem is, when I go to Business content >InfoObject by Application component> All I see is node OBWTCT ( Technical Content ). Why I Don't see the standard component ex FI SD COPA etc ? Is there a step missing ?

Hi,
Maybe you did not activate the infoareas/infocatalogs.
Try this:
-Tx(RSD1)
-Find any of the infoobject that you activate and check where is present the infoobject.
Regards
Assigns point if useful

Business packages for Project systems

i,
I wanted to know if there is a business package for Project systems which include transactions like CJ20N, CN33, CN41N, DP81,VA23, VA25. I checked in SDN Portal content portfolio and found there is a BP for Projects 5.3 and BP for Project self service. I checked out the content which is present but not sure whether it suits my requirements.
Appreciate if any one can point to the right Business package.
Regards
PN

Hi,
Chk out this link, it points to Project Self Service.
http://help.sap.com/erp2005_ehp_01/helpdata/en/3f/a197422836c76ae10000000a155106/content.htm
You can find the prerequisites & the configuration required in the above link.
For this Business Package you have to install the following software components:
SAP PSS 600
BP ERP05 PROJ SELF-SERV 1.0
Regards,
Abhishek

Transfer Rules missing in Business Content (704 lvl 1) for CMS

Hi SDN,
We are currently on BI 7.0, and using Business Content 704 level 1. When collecting BIC InfoSources for Collateral Management Systems (CMS), we notice that the transfer rules are missing in business content.
Has anyone encountered this issue? I have been referencing notes 1171293, and 1179880
Thanks,
Brendon

hi,
If there is missing in Business its problem with the business content patch levels.Check out with your basis team.
Regards,
Shiva.

Business Content Source System Assignment???

Hi Gurus,
i am installing Business content and after going thru few posts in this Forums i have been hearing about Source system assignment in the Business content screen.
but when ever i installed i never really used this option and we have only one R/3 source system
Can anybody explain me its functionality please
thankyou
harish

When you activate Business Content, DataSources from source systems are assigned to InfoSources in SAP BW. If you do not select a source system, all source systems are automatically assigned. If you have several source systems this may take a lot of time because transfer rules have to be activated for each DataSource from each source system.
However an assignment of a DataSource to an InfoSource may not be necessary for all existing Source systems.
Assign only the source systems you need to load data from for the Business Content Objects that you are going to activate.
You can subsequently change the selection you made.
The assignment of source systems is only relevant for transfer rules, DataSources and InfoPackages. If there is more than one source system, only those objects assigned to the specified source system are collected for the transfer. Objects that have not been assigned to the specified source systems are ignored.

InfoPackages Missing in Project Systems Business Content

Similar Messages

Maybe you are looking for