Infopath and Sharepoint
Hi
I have a custom list that edit with Infopath (add some filed,view and so...).
I want to set permission on the view.
what can i do?
Hi,
List is also a list web Part, go to your list under the special view ->Edit page->Edit Web Part->Advance->under Target Audiences, check the people you wanted.
If you insert a InfoPath web part to a list and edit "Target audiences", this applied on the InfoPath web part of the current list view.
"Target Audiences" is working for the web part of a view.
Best Regards,
Lisa Chen
Lisa Chen
TechNet Community Support
Similar Messages
-
Understanding the integration of InfoPath and SharePoint
In an attempt to move to an "online" registration for our technical school, I have been looking at in house applications that would allow me to create a form, post it on our website and then have it submitted back to us. Optimum would be
to have the populated form available as we need a workflow for approvals and then have a data file as well.
I created a form and am ready to move forward but honestly I am now lost. No one I talk to can explain to me how to proceed from here. I have even called Microsoft Support. Our school system DOES have SharePoint, however, we don't have
access as of yet at our local school. They have asked that my principal request access. I would like to have a good explanation of how this will all work before I ask him to get the needed permissions.
Bottom line, I have a form created. I need to publish it on our website for users. It needs to be submitted to us still as a form so that we can use it in an approval workflow process (rather than a data file such as in Access) although we need
this as well.
Should I be headed in a completely different direction (i.e., use another form designer)? HELP! We were hoping to have this available by the end of January.
Thanks for any help you can provide.
LisaYou can create a form using InfoPath and publish that to a SharePoint form library. All end users will see an HTML form rendered by SharePoint and therefore don't need to have InfoPath installed on their machines, all they need is a browser. This only works
if you can meet the following requirements:
- You have SharePoint Enterprise edition (otherwise you don't have Forms Services which is responsible for translating your InfoPath form to HTML)
- SharePoint Forms services is enabled on your SharePoint farm.
Kind regards,
Margriet Bruggeman
Lois & Clark IT Services
web site: http://www.loisandclark.eu
blog: http://www.sharepointdragons.com -
Infopath 2007 and SharePoint 2007 error with Web Service Submit and Recieve
I have an InfoPath form with code. The code submits the form to SharePoint and to SQL DB through Web Service. The form has some workflow. When form is in a "New" state if submits to SharePoint and Database through custom web service. Works fine
from both Client and SharePoint browser form. The database ID is returned to the form and then stored in a field. In second stage of workflow additional fields are shown for Supervisor to fill out. I then have an "update" web service to update the
database. I set all the field values in the Web service then execute both the update Web Service and the SharePoint submit. I get an error (both if running from desktop or SharePoint) Error is
"The string '' is not a valid AllXsd value"
I know sometimes this happens with dates. But I've got all the dates set. The funny thing is in the first submit there are 2 dates in the second submit there is one date. All are set the same and on the first submit no problem submits correct dates to SQL
database through web Service. Second submit has 2 Boolean fields that I also default to a value of false. I've debugged and looked at all the values and everything has a value. I use delete NIL to make sure value in Web Service is set. I can save the data
in the form but not submit it because I get the web service error. If I save the data in form and download it and copy all the values in the XML to my Web Service and invoke the web service works fine. So there is no error in the web service. The first
submit submits both dates and some integer values. The only difference in second is the Boolean value but it is set to default of false for all checkboxes. I'm going out of mind trying to see what could be wrong. Also difference with second
is it sends in the ID of the record that was set in form by result of first submit query sending back the DB value. That value is an integer but I also set correctly.
Susan J. SwangerHi Somatco,
According to your description, my understanding is that you got an error when you ran report with xml type datasource.
Please set the xml datasource credential to Use Windows Authentication (integrated security). More information, please refer to the link:
http://social.technet.microsoft.com/Forums/sqlserver/en-US/530c29ab-7ed5-4c36-816a-910c0b51f4bd/xml-data-source-unable-to-authenticate-using-windows-authentication?forum=sqlreportingservices
Here are some similar posts for you to take a look at:
http://www.symantec.com/business/support/index?page=content&id=TECH190935
http://social.msdn.microsoft.com/Forums/en-US/285e4e8c-d05c-48f8-b4f3-9d87988d823e/an-error-has-occurred-during-report-processing-rsprocessingaborted-query-execution-failed-for?forum=sqlreportingservices
In addition, as this issue is related to SQL Server Reporting, I commend you create a new thread in SQL Server Reporting forum, more experts will assist you with SQL Server Reporting.
SQL Server Report forum:
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/home?forum=sqlreportingservices
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support -
Cross Domain Trust Error, while opening the infopath in sharepoint list.
Dear All,
Facing some issue in
Environement:
Windows = Windows Server 2008
Shareppoint = Sharepoint Server 2013.
Project Server = Project Server 2013
Info Path = Info Path Designer 2013
Detailed:
I have sharepoint environment with Project Server,I which have created task list in my project site and then i customize that form using info path their is one column named: "Product Name" in my task list which is drop down menu in that menu
i want to show all the project name which are created in PWA Site. For that i made the External data connection to my sql server and select my desired table from that and also configured the my column data "i:e; Product Name. And published it to the my
site. Now when i opened that form it prompts the error
"The form cannot be submitted because this action would violate cross-domain restrictions.
If this form template is published to a SharePoint document library, cross-domain access for user form templates must be enabled
under InfoPath Forms Services in SharePoint Central Administration, and the data connection settings must be stored in a UDC file in a data connection library in the same site collection.
If this is an administrator-approved form template, the security level of the form must be set to full trust, or the data connection
settings must be stored in a UDC file by using the Manage data connection files option under InfoPath Forms Services in SharePoint Central Administration ."
Oopsss !!
Now start googling it found couple of solution shared listed below:
1. Enable the cross domain authenticated in Central Admin –> General Application Settings –> Configure InfoPath Form Services (Done)
2. Now Created the data connection library in my site collection which is PWA Site after that i went to the infopath and creating the data connection and
Convert to Connection File and enter the URL of the data connection library
and its prompt the error " the specified url is not a data connection library and enter the correct filename" didnt remember the exact error description at the moment.
So, that was all stuff, Kindly suggest me any step which i missed that or ay solution that resolve my this issue.
Thanks
REGARDS DANISH DANIEit seems the data-seed failed in your dehydration store.
so i would check if user orabple exsits in your db (pw is orabpel) .. and recreate the schema by executing the following script (based on your db)
orabpel\system\database\scripts\domain_oracle.ddl
hth clemens -
Questions about the future directions of InfoPath and Microsoft Access
Because I have been confused about the future directions of InfoPath and Access, I wrote a short blog post, which I have pasted below. My question is, can Microsoft provide some more guidance on Access vs InfoPath? If Access is indeed the
the future direction, can you please provide some pointers to resources that can help us transition.
A Short Review of MS Access, SharePoint ,InfoPath (2013)
After the November 2012 SharePoint Conference in Las Vegas (#spc12) there were a number of blog posts and people saying that Access 2013 was great and would be replacing InfoPath.
Marc Anderson and
Ruven
Gotz have short posts summarizing #SPC12 and touch on the subject of InfoPath and Access. I also spoke with several individuals shortly after #SPC12 and they were excited about Access 2013.
Since I rely heavily on InfoPath for much of what I do, I wanted to kick the tires and see what everyone was talking about. First, a few notes about SharePoint 2013 and Office 2013.
Microsoft should rename Access: If you have tried to
bing the word Access, then you know that the search results are overwhelming, because the word "access" is used for so many other purposes.
Use the RTM version of Office 2013! I was performing my investigations by leveraging the Office 365 Beta and the Office Applications that come with it. Not much was working! After I uninstalled the Beta
version of Office 2013 and Installed the RTM version everything seemed to work.
Windows 7 and IE 9.0: The drag & drop that is being touted as
"manna from heaven" seems to work well with Firefox, Safari, Chrome, and IE 10, but it does
not work with IE 9!
Non Microsoft browsers are still second class citizens (except for the drag & drop): Microsoft has finally done away with the Active X's for datasheet view (that is brilliant!) One can now see the newly
minted datasheet view in many browsers. But I still find that one needs to be in IE to do a number of key manual opeartions. For example pasting numerous rows of data from a spreadsheet into the new sheet view works only in IE.
Access 2013
Microsoft Access is touted as a non developer tool. I know a number of people who are on the business side and love Access. These people will like the renewed energy that Microsoft has applied to Access. One should note that conceptually
this functionality existed in SharePoint 2010. Here is what I see that is new:
+The new version works better:Although I haven't tested it fully, it seems that many more features that work on the Desktop version of Access, now work in the published Web Application which is hosted by SharePoint 2013.
+The new version has fairly robust browser based forms: End users can now fill in data using forms that are rendered in the browser.
+The published version that resides in SharePoint now uses its own SQL server tables. So the engine appears to be SQL Server, not a modified version of Access built for a server. This stands to be quite robust, but I imagine
that some quirks will surface due to new model.
The limitations are:
- Access is pretty much its own application and does not integrate with SharePoint building blocks. For example, an Access table is not easy to integrate with a SharePoint workflow. Further, although Access forms now are visible
in a browser, they are not nearly as rich as InfoPath forms. InfoPath forms cannot easily integrate with the Access tables. In order to integrate SharePoint features and Access, one needs to tie SharePoint list(s) to Access as data sources.
This overcomplicates the model and one may very well run into synchronization issues.
In short, although I believe there will be some people who will be happy with newly minted Access, I do not think that Access will be able to replace InfoPath and Workflow technologies. I do agree that Microsoft does not seem to have put much energy into
InfoPath. If they leave a vacuum in this space, then others may very well take over, for instance Nintex Forms.Although I agree with the comments made by Ruven and Marc after the conference please note that those blog posts are their own personal opinions and that they don't work for Microsoft. A lot of people have asked Microsoft to clarify the future of InfoPath
and the response up until now has been a deafening silence. In my opinion speculations about Access replacing InfoPath are premature.
I should also point out that most of your comments about Access 2013 above are actually about Access Services in SharePoint Server 2013. Access Services are NOT Access they are a shared service offering in SharePoint that convert and publish Access
databases and forms. As you point out once an Access database is published through Access services it is converted to SQL Server and no longer resides in Access. Of course I don't work for Microsoft either so these are all just my personal opinion.
Having said that I doubt you will get the confirmation/response that you are hoping for from any official Microsoft channel.
Paul Stork SharePoint Server
MVP Principal Solutions Architect: BlueChip Consulting Group
Blog: http://dontpapanic.com/blog
Twitter: Follow @pstork
Please remember to mark your question as "answered" if this solves your problem. -
Digital Signature and SharePoint 2013
Dear Expert,
My company has a plan to do digital signature and sharepoint 2013. Now, we focus for internal use that I know use AD CS. and in near future we use for external use. We plan to buy 3rd party certificate.
My question
1. How to implement this solution? Please suggest
2. If I implemented AD CS, can we use public certificate in near future.
3. Can we use public certificate with SharePoint 2013?
Thank youHi,
Based on your description, my understanding is that you want to use Digital Signature in SharePoint Server 2013.
You can use digital signatures in forms ,then use these forms in you SharePoint site.
In InfoPath form ,you can change the form to allow signature here: File>Info>Advanced form options >Digital Signatures .You can choose to sign the whole form or a field .
https://social.technet.microsoft.com/Forums/en-US/0ed54d57-d67d-41cd-bd1b-9e5a4be10d0c/use-of-digital-signature-in-sharepoint-2010?forum=sharepointcustomizationprevious
besides, here is a similar post, you can take a look at:
http://sharepoint.stackexchange.com/questions/78058/custom-digital-signatures-or-hash-on-list-items
For more information about implemented AD CS, refer to the following link:
http://technet.microsoft.com/en-us/library/hh831574.aspx
Best Regards,
Lisa Chen
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Lisa Chen
TechNet Community Support -
WCF Service and Sharepoint Form library : How i can read or access a form libray and query a item from file name and read form xml in WCF service ?
Ahsan RanjhaHi,
In SharePoint 2013, we can take use of REST API or Client Object Model to access the SharePoint objects like Form Library.
SharePoint 2013 REST API
http://msdn.microsoft.com/en-us/library/office/dn450841(v=office.15).aspx
http://blogs.technet.com/b/fromthefield/archive/2013/09/05/working-with-sharepoint-list-data-odata-rest-and-javascript.aspx
SharePoint 2013 Client Object Model
http://msdn.microsoft.com/en-us/library/office/fp179912(v=office.15).aspx
http://msdn.microsoft.com/en-us/library/office/jj193041(v=office.15).aspx
With the retrieved file, we can then use XmlDocument object to parse it and get the values you want:
http://weblogs.asp.net/jimjackson/opening-and-reading-an-xml-file-in-a-document-library
http://stackoverflow.com/questions/1968809/programatically-edit-infopath-form-fields
Best regards
Patrick Liang
TechNet Community Support -
Is anyone using Live Designer forms with Sharepoint. We don't have infopath, and we're thinking about using Live Designer forms. Any comments?
You can upload and save PDF forms but there is no data storage as it is for InfoPath
/Ulf -
Rules of Infopath in SharePoint Designer
I was working with Calendar lists and wanted to apply customizations of Infopath but infopath cannot be aplied to a calendar list.
I was wondering, if we could have rules(formload, validation, formating, action, form submit) kind of actions in Sharepoint designer.
How do i go about achiveing that in SharePoint Designer.
tnxHi explore, have you considered making a custom list, setting it up with the same type of columns as a calendar list, customize the form in InfoPath and then create a calendar view?
cameron rautmann -
How to REpublish Custom Task Forms (InfoPath) to SharePoint 2010 State Machine Workflows
I am new to SharePoint. Sorry if answer to my question is obvious.
I've create Custom Task Form in InfoPath and publish it (File/Publish/Network Location [Form Template Path and filename='MYPROJECT/Forms/ApprovalForm.xsn'; Form template name='ApprovalForm'], in the next window I've cleared Public URL according to the articlehttp://www.codeproject.com/Articles/195348/SharePoint-2010-State-Machine-Workflows-with-Custo).
After it I've added module Forms, and added ApprovalForm.xsn from the existing items.
My xml files: Elements.xml
<Elements xmlns="http://schemas.microsoft.com/sharepoint/">
<Workflow
Name="Order New Server"
Description="My SharePoint Workflow"
Id="482cbc86-b717-4981-a49a-3cf4c89e9399"
CodeBesideClass="Myproj.OrderNewServer.OrderNewServer"
CodeBesideAssembly="$assemblyname$"
TaskListContentTypeId="0x01080100C9C9515DE4E24001905074F980F93160">
<Categories/>
<AssociationData><Data></Data></AssociationData>
<MetaData>
<AssociationCategories>List</AssociationCategories>
<Task2_FormURN>urn:schemas-microsoft-com:office:infopath:ApprovalForm:-myXSD-2012-03-09T14-11-55</Task2_FormURN>
<StatusPageUrl>_layouts/WrkStat.aspx</StatusPageUrl>
</MetaData>
</Workflow>
</Elements>
Feature.Template.xml:
<?xml version="1.0" encoding="utf-8" ?>
<Feature xmlns="http://schemas.microsoft.com/sharepoint/" ReceiverAssembly="Microsoft.Office.Workflow.Feature, Version=14.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c" Receiverlass="Microsoft.Office.Workflow.Feature.WorkflowFeatureReceiver">
<Properties>
<Property Key="GloballyAvailable" Value="true" />
<Property Key="RegisterForms" Value="Forms\*.xsn"/>
</Properties>
</Feature>
My form work fine, but when I make changes and republish it, it doesn't update (I see old form). What I tryed:
IISReset
Clear all cookies and cache in IE
Retract solution, restart VS2010, reboot computer.
Change assembly number, guid.
I have no ideas, what can I try for republish my form with changes.
Thank you in advance for any suggestions.
PS: sorry for my writing. English is not my native language.
PPS: when I save new Form to new location and add it to the project, it works.I've found how can I republish changes. But it seems more like crutch than solution, but it works:
After republishing InfoPath form, I delete file from project (DEL on ApprovalForm.xsn in Solution explorer) and after it add it again. (Add/Existing Item). And then redeploy! Hurray!
Is there any way to redeploy a Task Form directly on the server without importing it in Visual Studio again? I am using some data connections in my task form which are different for different environments (staging, dev. etc.). Seems like I've to create a separate
Workflow WSP file for each envrionment. Any comments? -
SSO for MS outlook, OWA and Sharepoint using SSO 2.0
Hi,
We have installed the secure login server 2.0. And configured SSO for SAP (ABAP, JAVA) systems using X.509 certificate. it is working fine.
We want to configure SSO for some non SAP applications like MS outlook, Outlook Web Access, Sharepoint.
I dont see any documentation in the implememntation guide of NW SSO 2.0 for how to configure these non sap applications to accept X.509 certificates.
Anyone please share the details of how to configure SSO for MS outlook, OWA and Sharepoint
Regards,
Yogesh Kumar DHello Yogesh,
Secure Login Server generates short lived certificates, this means after a configured time (or even
after an logout, because the Secure Login Client does not persist the private
keys in the file system) the private key and certificate is gone.
So using this for long term encryption is not practicable (because decryption
will be very very hard after a certificate/key renew...)
For a signature only solution the problem would be the signature validation, because it needs the
public key/certificate from the signer. This is usually included into the
PKCS#7 signature format, but its not guaranteed (depends on the application settings as example in outlook etc.). So this would be theoretically possible, but unlikely.
For long term encryption/signatures you need persistence certifkate/keys.
So thats the reason there is not documentation about that use case in Secure Login Server.
best regards
Alex -
Install AD / SQL Server 2012 and SharePoint 2013 on a single server as Development Environment
Hi All,
I'm planning to prepare a SharePoint 2013 development environment. The current idea is to install Domain controller, SQL Server 2012 and SharePoint 2013 all on a single server. Even though this is for development purposes,
would there be any limitations specially when it comes to SP 2013 functionalities according to your experience?
Some articles i referred.
http://sharepoint-tutorial.net/post/2012/07/18/install-sharepoint-2013-domain-controller.aspx
http://social.technet.microsoft.com/Forums/en-US/f438c9a6-02e8-43d3-9963-7a0608f0b961/sharepoint2013-on-domain-controller
Thanks,
DilipHi
i understand this is a sandbox environment but you should be able to install everything.
http://sharepoint-tutorial.net/post/2012/07/18/install-sharepoint-2013-domain-controller.aspx
Hope this helps. Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. -
DPM 2012 SP1 and SharePoint 2013 on a SQL 2012 AlwaysOn AG
I am trying to protect a new SharePoint Foundation 2013 farm with it's databases stored on an SQL 2012 AlwaysOn Availability Group. I've run configureSharePoint.exe -EnableSharePointProtection on my WFE and SharePoint shows up in DPM when I try to
add it to a protection group. But I get the 32008 referenced here: http://support.microsoft.com/kb/970641 when trying to select the farm to back up.
If I run ConfigureSharePoint.exe -resolveallSQLAliases on the WFE it doesn't return anything.
I'm directly backing up databases on the SQL 2012 server, but not any of the SharePoint DBs.
KHi,
I'm having some trouble understanding what I'm seeing in the writer output from the WFE server. Specifically the machine names that the writer is reporting.
If you look in the wfewtiters.txt, What is the machine that ends in 02 ? Is that a physical machine or an alias ?
The machine ending in 06 is the Secondary SQL Server and that is what the Sharepoint writer is pointing to.
The WFE VSS Sharepoint writer shows this for two content DB’s
* WRITER "SharePoint Services Writer"
- Writer ID = {da452614-4858-5e53-a512-38aab25c61ad}
- Writer instance ID = {c0c46d7b-1c01-44bd-8353-e3433f5b8f07}
- Supports restore events = TRUE
- Writer restore conditions = VSS_WRE_ALWAYS
- Restore method = VSS_RME_RESTORE_AT_REBOOT_IF_CANNOT_REPLACE
- Requires reboot after restore = FALSE
- Excluded files:
+ Component "SharePoint Services Writer:\XXXX02\WSS_Content_at.contoso.local"
- Name: WSS_Content_at.Contoso.local
- Logical path: XXXX02
- Full path: \XXXX02\WSS_Content_at.Contoso.local
- Caption: Content Database WSS_Content_at.Contoso.local
- Type: VSS_CT_DATABASE [1]
- Is selectable: TRUE
- Is top level: TRUE
- Notify on backup complete: FALSE
- Paths affected by this component:
- Volumes affected by this component:
- Component Dependencies:
- Dependency to "{a65faa63-5ea8-4ebc-9dbd-a0c4db26912a}:\\YYYY06\YYYY06\WSS_Content_at.contoso.local"
+ Component "SharePoint Services Writer:\XXXX02\WSS_Content_fw.Contoso.local"
- Name: WSS_Content_fw.contoso.local
- Logical path: XXXX02
- Full path: \XXXX02\WSS_Content_fw.Contoso.local
- Caption: Content Database WSS_Content_fw.Contoso.local
- Type: VSS_CT_DATABASE [1]
- Is selectable: TRUE
- Is top level: TRUE
- Notify on backup complete: FALSE
- Paths affected by this component:
- Volumes affected by this component:
- Component Dependencies:
- Dependency to "{a65faa63-5ea8-4ebc-9dbd-a0c4db26912a}:\\YYYY06\YYYY06\WSS_Content_fw.contoso.local"
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT]
This posting is provided "AS IS" with no warranties, and confers no rights. -
MasterPages and SharePoint foundation 2013
Hi
I have created a web application in SharePoint Foundation 2013. I also have created multiple subsite.
I want to change the visual (branding) of the website (and all subsites).
I have created a custom masterpage and wanted to set it as the default master page. But when I do that, everything is now set with that custom masterpage (even the site setting pages, the viewlsts.aspx, settings.aspx).
Is there a way to bind masterpages only with the content pages of my website ?
Any links for info about that ?
Thanks
Richard Martin Web Developer / BI DeveloperHi marric01,
All of the site setting pages, the viewlsts.aspx and settings.aspx is the application page. An application page is an ASP.NET Web page that is designed for
use in a SharePoint Web site. Application pages are stored on the file system of the front-end Web server in the %ProgramFiles%\Common Files\Microsoft Shared\web server extensions\14\TEMPLATE\LAYOUTS directory and exist for every site in a Web application.
This folder is mapped to an Internet Information Services (IIS) virtual directory called _layouts. Every site and subsite will have access to the application pages by using the _layouts virtual directory.
The scenario you have seen is what SharePoint will do when set the master page through Site Settings->Master page. All the pages on the site will apply this master page.
The settings.aspx, viewlsts.aspx and upload.aspx. etc. are application pages, the difference between application page and content page is that: application page store in server 15/Template/Layouts folder, all applications in the SharePoint farm use the same
application page, while content page store in content database, each site use a unique page of them, you can update the page content in different site as you like.
SharePoint by default doesn’t provide a method to set different master page for application pages, and this is not recommended, even if you can change this through update the page directly in the layouts folder, whenever you change it, it will affect the whole
SharePoint farm, on all web applications.
If you really need to this, I would suggest you to custom the ribbon button to direct to your custom specific application page like settings page. The concern by doing this is the default settings page is still available, and if users access the page by typing
the url directly, he will see the default settings page.
Reference:
http://msdn.microsoft.com/en-us/library/aa979592.aspx
Thanks,
Eric
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support,
contact [email protected].
Eric Tao
TechNet Community Support
Hi,
Thanks for the information. While waiting for help with this forum, I was playing with SharePoint Foundation 2013 and SharePoint designer 2013. I saw that I can bind custom masterpage for each page that I create.
(Style => Attach => Custom masterpage)
I also managed to bind subsite pages to that same custom masterpage.
Is this a good way to customize the look and feel of my SharePoint foundation 2013 website (We are building a small intranet for about 100 person).
Users are only gona be able to modify content inside the pages. We are (IT dept) the only one that can modify structure, add new pages and modify the look for the website.
Thanks again !
Richard
Richard Martin Web Developer / BI Developer -
Sharepoint 2010 comsumer and Sharepoint 2013 is the provider
The client has sharepoint 2010 as the consumer and 2013 as the provider for the service application "User profile service application"
When the client clicks on My profile and tries to change his picture we get an error mesage, when the logs were reviewed we see the below message
Timestamp Process TID Area Category EventID Level Message Correlation 09/05/2014 10:17:46.17 w3wp.exe (XYZXYZXYZ:0x26E0) 0x5DEC SharePoint Foundation Logging Correlation Data xmnv Medium Name=Request (GET:http://xxxxx/_layouts/SelectPicture2.aspx?Type=User&accountname=yyyyy&IsDlg=1)
9f43fafd-1f9d-436b-9100-bbe66ed75e72 09/05/2014 10:17:46.18 w3wp.exe (XYZXYZXYZ:0x26E0) 0x5DEC SharePoint Foundation Logging Correlation Data xmnv Medium Site=/ 9f43fafd-1f9d-436b-9100-bbe66ed75e72 09/05/2014 10:17:46.20 w3wp.exe (XYZXYZXYZ:0x26E0) 0x5DEC
SharePoint Portal Server Runtime 7pm5 High Url Path: "/_layouts/SelectPicture2.aspx" 9f43fafd-1f9d-436b-9100-bbe66ed75e72 09/05/2014 10:17:46.21 w3wp.exe (XYZXYZXYZ:0x26E0) 0x5DEC SharePoint Portal Server Runtime 7pma Exception Unhandled exception
caught during execution of Microsoft.SharePoint.Portal.PageBase::ErrorHandler(). Exception information: Exception information: System.IO.FileNotFoundException: The Web application at http://my-sites/ could not be found. Verify that you have typed the URL correctly.
If the URL should be serving existing content, the system administrator may need to add a new request URL mapping to the intended application. at Microsoft.SharePoint.SPSite..ctor(SPFarm farm, Uri requestUri, Boolean contextSite, SPUserToken userToken) at
Microsoft.SharePoint.SPSite..ctor(String requestUrl) at Microsoft.SharePoint.Portal.WebControls.ProfileImagePicker.LoadPictureLibrary() at Microsoft.SharePoint.Portal.WebControls.ProfileImagePicker.<onload>b__0() at Microsoft.SharePoi... 9f43fafd-1f9d-436b-9100-bbe66ed75e72
09/05/2014 10:17:46.21* w3wp.exe (XYZXYZXYZ:0x26E0) 0x5DEC SharePoint Portal Server Runtime 7pma Exception ...nt.SPSecurity.<>c__DisplayClass4.<runwithelevatedprivileges>b__2() at Microsoft.SharePoint.Utilities.SecurityContext.RunAsProcess(CodeToRunElevated
secureCode) at Microsoft.SharePoint.SPSecurity.RunWithElevatedPrivileges(WaitCallback secureCode, Object param) at Microsoft.SharePoint.SPSecurity.RunWithElevatedPrivileges(CodeToRunElevated secureCode) at Microsoft.SharePoint.Portal.WebControls.ProfileImagePicker.OnLoad(EventArgs
ea) at System.Web.UI.Control.LoadRecursive() at System.Web.UI.Control.LoadRecursive() at System.Web.UI.Control.LoadRecursive() at System.Web.UI.Control.LoadRecursive() at System.Web.UI.Control.LoadRecursive() at System.Web.UI.Control.LoadRecursive() at System.Web.UI.Page.ProcessRequestMain(Boolean
includeStagesBeforeAsyncPoi... 9f43fafd-1f9d-436b-9100-bbe66ed75e72 09/05/2014 10:17:46.21* w3wp.exe (XYZXYZXYZ:0x26E0) 0x5DEC SharePoint Portal Server Runtime 7pma Exception ...nt, Boolean includeStagesAfterAsyncPoint) System.IO.FileNotFoundException: The
Web application at http://my-sites/ could not be found. Verify that you have typed the URL correctly. If the URL should be serving existing content, the system administrator may need to add a new request URL mapping to the intended application. at Microsoft.SharePoint.SPSite..ctor(SPFarm
farm, Uri requestUri, Boolean contextSite, SPUserToken userToken) at Microsoft.SharePoint.SPSite..ctor(String requestUrl) at Microsoft.SharePoint.Portal.WebControls.ProfileImagePicker.LoadPictureLibrary() at Microsoft.SharePoint.Portal.WebControls.ProfileImagePicker.<onload>b__0()
at Microsoft.SharePoint.SPSecurity.<>c__DisplayClass4.<runwithelevatedprivileges>b__2() at Microsoft.SharePoint.Utilities.... 9f43fafd-1f9d-436b-9100-bbe66ed75e72 09/05/2014 10:17:46.21* w3wp.exe (XYZXYZXYZ:0x26E0) 0x5DEC SharePoint Portal Server
Runtime 7pma Exception ...SecurityContext.RunAsProcess(CodeToRunElevated secureCode) at Microsoft.SharePoint.SPSecurity.RunWithElevatedPrivileges(WaitCallback secureCode, Object param) at Microsoft.SharePoint.SPSecurity.RunWithElevatedPrivileges(CodeToRunElevated
secureCode) at Microsoft.SharePoint.Portal.WebControls.ProfileImagePicker.OnLoad(EventArgs ea) at System.Web.UI.Control.LoadRecursive() at System.Web.UI.Control.LoadRecursive() at System.Web.UI.Control.LoadRecursive() at System.Web.UI.Control.LoadRecursive()
at System.Web.UI.Control.LoadRecursive() at System.Web.UI.Control.LoadRecursive() at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) 9f43fafd-1f9d-436b-9100-bbe66ed75e72 09/05/2014 10:17:46.21
w3wp.exe (XYZXYZXYZ:0x26E0) 0x5DEC SharePoint Server Unified Logging Service c91s Monitorable Watson bucket parameters: SharePoint Server 2010, ULSException14, 06d8f9f3 "sharepoint portal server", 0e00178d "14.0.6029.0", 1f65804a "microsoft.sharepoint",
0e0017f9 "14.0.6137.0", 5136df43 "wed mar 06 00:16:35 2013", 000057b4 "000057b4", 00000077 "00000077", 4d150129 "filenotfoundexception", 37706d61 "7pma" 9f43fafd-1f9d-436b-9100-bbe66ed75e72 09/05/2014
10:17:46.21 w3wp.exe (XYZXYZXYZ:0x26E0) 0x5DEC SharePoint Foundation Runtime tkau Unexpected System.IO.FileNotFoundException: The Web application at http://my-sites/ could not be found. Verify that you have typed the URL correctly. If the URL should be serving
existing content, the system administrator may need to add a new request URL mapping to the intended application. at Microsoft.SharePoint.SPSite..ctor(SPFarm farm, Uri requestUri, Boolean contextSite, SPUserToken userToken) at Microsoft.SharePoint.SPSite..ctor(String
requestUrl) at Microsoft.SharePoint.Portal.WebControls.ProfileImagePicker.LoadPictureLibrary() at Microsoft.SharePoint.Portal.WebControls.ProfileImagePicker.<onload>b__0() at Microsoft.SharePoint.SPSecurity.<>c__DisplayClass4.<runwithelevatedprivileges>b__2()
at Microsoft.SharePoint.Utilities.SecurityContext.RunAsProcess(CodeToRunEleva... 9f43fafd-1f9d-436b-9100-bbe66ed75e72 09/05/2014 10:17:46.21* w3wp.exe (XYZXYZXYZ:0x26E0) 0x5DEC SharePoint Foundation Runtime tkau Unexpected ...ted secureCode) at Microsoft.SharePoint.SPSecurity.RunWithElevatedPrivileges(WaitCallback
secureCode, Object param) at Microsoft.SharePoint.SPSecurity.RunWithElevatedPrivileges(CodeToRunElevated secureCode) at Microsoft.SharePoint.Portal.WebControls.ProfileImagePicker.OnLoad(EventArgs ea) at System.Web.UI.Control.LoadRecursive() at System.Web.UI.Control.LoadRecursive()
at System.Web.UI.Control.LoadRecursive() at System.Web.UI.Control.LoadRecursive() at System.Web.UI.Control.LoadRecursive() at System.Web.UI.Control.LoadRecursive() at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
9f43fafd-1f9d-436b-9100-bbe66ed75e72 09/05/2014 10:17:46.21 w3wp.exe (XYZXYZXYZ:0x26E0) 0x5DEC SharePoint Foundation Monitoring b4ly Medium Leaving Monitored Scope (Request (GET:http://xxxxx/_layouts/SelectPicture2.aspx?Type=User&accountname=yyyyy&IsDlg=1)).
Execution Time=50.9131783692527 9f43fafd-1f9d-436b-9100-bbe66ed75e72 </runwithelevatedprivileges></onload></runwithelevatedprivileges></onload></runwithelevatedprivileges></onload>
Checked the Alternative access mapping on the provider server and it looks good.
what would cause this to happne and how can this be resolved
SatyamCameron,
Thanks for taking the time to reply.
Actually, it may not be related to compatibility. Let me explain in detail (As below)
Client has 2 different environments SharePoint 2010 and SharePoint 2013.
On SharePoint 2010 they have the web application-Site collections, however for My sites they use SharePoint 2013, where the trust (Root certificate and the STS ) was shared... Making the SP2010
as the consumer and SP 2013 as the provider.
When a user from SharePoint 2010, click on my profile the user is then taken to this page "edituserprofile.aspx"
which still has the look and feel of sharepoint 2010, and under pictures when we choose the button "Choose Picture" we get the error message with the corelation ID, when checked the ULS logs we get the message (Mentioned in the first post and is
also mentioned below)
"Exception Unhandled exception caught during execution of Microsoft.SharePoint.Portal.PageBase::ErrorHandler().
Exception information: Exception information: System.IO.FileNotFoundException: The Web application at http://my-sites/ could not be found. Verify that you have typed the URL correctly. If the URL should be serving existing content, the system administrator
may need to add a new request URL mapping to the intended application. "
I have checked the AAM and it looks good.
When the user clicks on my profile on SP2010 environment , the user must be diverted to the sp2013 environment to update his information...correct ?
Satyam..
Maybe you are looking for
-
When signing in to the internet using Firefox when I type in the first letter of my e-mail address it brings up the entire address which I click on an it fills in the blank. On my laptop at this point when it fills in the e-Mail address it automatica
-
OutofMemory error while uploading a file
Hi! I am using the jsf upload component as follows: <hx:fileupload styleClass="fileupload" id="fileupload1" value="#{pc_Infosession.pj1}"> <hx:fileProp name="fileName" value="#{pc_Infosession.pj2}" /> <hx:fileProp name="contentType" valu
-
XML data encoding iso-8859-1 . Currently utf-16 is default encoding
Hello ABAP Gurus , Need a help from you . Scenario : We have SAP4.7 enterprise version which we have now converted to Unicode system . There is a BSP application which talks to an external web application (Non Unicode) thru HTTP protocol and sends da
-
Why does the mandatory field indicator (*) not aligned in Firefox 4.0?
[http://i56.tinypic.com/24ng1vt.png Asterisk not aligned in Firefox 4.0]
-
Odd error with MS Office Install and transforms
Hello, I'm seeing this on our new Dell PCs that we are delivering to our staff. We create the image, test it, and it works fine. We then deliver the PCs to the user, user logs in, Windows creates profile, etc, but MS Office (2002) won't run - for tha