Infopath cannot submit the form because it contains errors. Errors are marked with either a red asterik(required fields) or a red, dashed border (invalid values)

Infopath cannot submit the form because it contains errors. Errors are marked with either a red asterik(required fields) or a red, dashed border (invalid values).
Press Ctrl+Shift+O for next error or Press Ctrl+Shift+I for error details
Please help me, Thank in advance.
Sravan.

Hi Sravan, this means that one or more of the fields are required to be filled in or have validation set up on them so that the information entered matches a certain criteria. Make sure what's entered matches what's required. If the form still can't be
submitted, check the rules set in InfoPath and the list/library to see what's causing the error(s).
cameron rautmann

Similar Messages

  • Sharepoint 2010, InfoPath 2010 with Custom Workflow. Error Message: InfoPath cannot submit the form. An error occured while form was submitted...

    I have created an InfoPath form that submits to a Sharepoint library with custom workflow attached. The workflow is initiated when the user submits the form. An email is sent to the supervisor who clicks the "Encoded Absolute URL" and approved
    the form via the emailed form. Then, based on certain criteria the form is either emailed to the VP or the workflow is complete. The VP is sent an email and clicks the "Encoded Absolute URL" and sumbits the form via the emailed form. This is
    how I would like it to work. The reality is, the form submits and is emailed to the supervisor and the supervisor is able to approve but when the form is sumbitted I get an error. The error is "InfoPath cannot submit the form. An error occured while
    this form was being submitted. The form cannot be submitted to the following location: <URL> The file <URL> is checked out for editing by <me> The operation completed successfully." The operation did not complete successfully and it
    is not checked out. I have read in previous posts that the file is locked. Since I am in the testing faze of the project there is no one else using the form. I have waited 24 hours and the lock has not been released. Please help!!! My deadline is growing short.

    I ran into your post while having a similar issue.  I don't have a 'full' fix for you, but I noticed at least in our case if you made sure you opened the Infopath form through the browser instead of the client Infopath program (use the drop-down menu
    and open in browser) the error doesn't occur.  Hope that helps some....

  • Infopath cannot submit the form ?

    I have infopath form in Infopath 2010, i have publish by choosing option Publish form to a sharepoint Library. It has been publish well.
    I have made data connection for submit this form as a document file, it also got succed.
    When i filling data and click to Submit option then i am getting following error message-->
    InfoPath cannot submit the form.
    An error occurred while the form was being submitted.
    InfoPath cannot submit to the following location: http://testdev.gcgation.com/apps/LossPreventionIncidents/LossPreventionIncidents/Loss
    Prevention
    Incident-20121101203.xml
    The form template has insufficient security privileges.
    Access is denied.
    What i have missed , is any fruitfull suggestion on the same?

    Hello,
    Is your InfoPath form is fully trusted. Please check once. You can set this to true from "Security and Trust" option.
    Thanks! BR, Prasham http://prashamsabadra.blogspot.in/

  • ITunes cannont backup the iPhones because a session could not be started with the iPhone" I've never connected my phone to any other computer and it worked fine a the other day.  Help Please?

    I'm trying to sync my iPhone 3G S to my computer.  Midway through I get a message "iTunes cannot backup the iPhone because a session could not be started with the iPhone."  I have not connected my phone to any other computer and this just began happening within the last day or so. 
    PLEASE HELP!!

    One of your backup files might be corrupt. Try following the steps in this article to correct the issue: http://support.apple.com/kb/ts2529

  • InfoPath 2013: InfoPath cannot load the view. The view may have been modified to contain unsupported HTML such as frames.

    Hello Folks,
    I'm facing a strange behavior of InfoPath 2013 while using with SharePoint Designer 2013 to customize the forms. Whenever i open any SharePoint form to customize it in InfoPath 2013, it gives me error "InfoPath cannot load the view. The view may have
    been modified to contain unsupported HTML such as frames."
    Just like all other folks, i also assumed that the forms are corrupted and i need to change the extension to *.cab and blah blah blah. But, when i noticed that the error is coming with new list forms, new workflow forms as well then i tried to research on
    the issue. Surprisingly, all forms are opening on my colleague's PC but not from my PC. We're using the same server, same SharePoint Production, same SharePoint Development and similar InfoPath. Infact, our system team has prepared both of us in a similar
    way. The only difference is OS, where he is using Win 8 and mine is Win 7 Pro.
    Therefore, from last 1 week, i've to swap my PC with my colleague if i've to customize or update any form in InfoPath 2013. This is quite bizarre. Can someone let me know what's wrong with this issue?
    Regards,
    Sohaib
    Sohaib Khan

    Hi Sohaib,
    I'd like to double confirm with you that the issue only occurs to your client machine. Please log on to another machine and see if the issue is related to your account.
    If the issue is only related to your machine, I'd recommend you clear InfoPath cache and repair Office program.
    Then go to InfoPath > Options > More Options > General > Internet Options > Add SharePoint sites to your trusted sites and disbale protected mode.
    http://blogs.msdn.com/b/michael_yeager/archive/2008/07/09/infopath-cache.aspx
    http://office.microsoft.com/en-in/infopath-help/repair-office-programs-HA010357402.aspx
    Regards,
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected] .
    Rebecca Tu
    TechNet Community Support

  • InfoPath cannot load the view. The view may have been modifed to contain unsupported HTML such as frames.

    Hi,
    I'm running InfoPath 2013 Designer and I'm experiencing a very annoying bug. Whenever I try to open a Infopath file I get the error, "InfoPath cannot load the view. The view may have been modifed to contain unsupported HTML such as frames."
    Sometimes it opens without a problem but most the time I get this error message. The strange thing is that I can create a new form without any frames, save it and then when I go to open it have the same problem. I've tried reinstalling InfoPath but it didn't
    help.
    Please help!!!
    Thanks in Advance,
    Mark Elliott
    Windows 7 Home Premium 64 bit; Internet Explorer 11; Office 2013 Pro

    Has anybody figured this out? I have the same problem.  InfoPath 2013 will not open any files from one computer which all work from another computer with the same version of InfoPath so this basically rules out file corruption. (The files are in
    a network share).  Both computer have InfoPath 2013. If I reboot the computer in question it will sometimes work then goes back to the error. 
    The only difference between this computer an all the others is that this one has a bunch of Office 2010 updates since it has SharePoint 2010 designer installed, (not office).  I did try to uninstall the updates but the problem has not been resolved. 
    This is the second time this happens.  Last time I had to completely remove Office 2013 & SharePoint designer then used the Windows rollback feature and finally reinstall office 2013.  Everything worked great until I installed SharePoint 2010
    designer then after a few updates the problem resurfaced.
    This is really annoying, I cant believe its not happening to more people.
    Ben
    ** Update **
    The problem went away although I am not 100% sure why. I decided to provide additional information in case someone has the same issue.  I deleted the Digital Certificate that I had previously requested from our domain server. Now suddenly everything
    is working. Like I said before, I'm not sure if this was the cause/fix but if you are having the same problem perhaps you can try the same thing and provide some feedback to possibly help others.
    I would like to thanks anyone who spent time on this.
    **Update**
    The problem came back. At this point I suspect either an update or something with Visual Studios 2012. My forms are heavy on custom code so I must be doing something wrong. I doubt it was an update since it would be happening to more people
     Again, I am able to open the same file from another computer with the only difference being that the other PC does not have Visual Studio 2012

  • HT1351 Whether or not I sync items on iTunes to my ipod, I cannot eject the ipod because a message keeps coming up and saying that my ipod cannot be ejected because it contains files that are being used by another application. How do I fix this?

    I just got an ipod classic 7th generation a couple days ago and I'm having a heck of a time with it. My latest problem is that with media on iTunes, I cannot eject the ipod because it says that it cannot be ejected because it contains files that are being used by another application. What application is this, and what do I do about it?

    Hi newipoduser,
    Here are some possible solutions:
    Do you use musicmatch jukebox on your computer? If you do, you have to go into task manager on windows and end process mim.exe. It interferes with disconnecting ext devices
    Empty your "trash/recycle bin."
    If that doesn't work, try quitting all your programs, especially music-type programs, basically things that look for mp3's etc.
    if that doesn't work, "log off" then "log on" and that should refresh/purge your OS system.
    Finally, you can restart your computer.
    Hope one of these helps!
    Cheers,
    GB

  • "The iPod cannot be ejected because it contains files that are in use..."

    My iPod (20 gb, 4 gen) syncs fine, but when I go to eject it a window pops up saying "the iPod cannot be ejected because it contains files that are in use by another application."
    Unfortunately, there are no files on it (that I know of) that are being used by another application.
    I can't use the eject function on the task bar because I have Vista and it will corrupt the iPod. I've just been unplugging it with out ejecting, but was hoping there was a solution. Any advice?

    Are you running any anti-virus or spyware detection software in the background? Start closing programs located in the taskbar next to the clock and try ejecting the iPod.

  • The Ipod cannot be ejected because it contains files that are in use by ano

    When I want to eject my Ipod i get this message:
    The Ipod cannot be ejected because it contains files that are in use by another application.
    After I had put some songs on the ipod, i got that message. I thought maybe the new songs were the problem but de computer still doesn't want to eject my Ipod and there are no programes in use other than itunes.
    Does anybody know what to do???!!!
    greetings Mandarijn

    hi Mandarijn!
    The Ipod cannot be ejected because it contains files that are in use by another application.
    by any chance, do you have McAfee ActiveScan security software on that PC? i've seen that implicated a few times with this message.
    if you do have McAfee, as an experiment try switching that off prior to doing a sync. do you still get the message then?
    if the McAfee thing doesn't-help/isn't-relevant, let's try using the following techniques to see if we can identify if some other program is causing the message. (the article is actually about installation errors, but the techniques are relevant to this sort of investigation.)
    Close Applications Running in the Background
    love, b

  • The ipod cannot be ejected because it contains files that are in use by another application

    I am using my crusty but trusty 5G iPod with my new rMPB, and things have been working as expected for the month or so that I've had the new laptop. But "recently," (past few days?), when I go to eject from iTunes (current - 11.1.5), I get the error message, "The iPod cannot be ejected because it contains files that are in use by another application." The iPod is then ejected but the "Do not disconnect" message remains on the iPod screen. I can continue using the iPod as normal after all this.
    If I eject the iPod from the Finder, I get no error message but the iPod screen still remains at "Do not disconnect."
    I tried plugging it into my Windows 7 PC (did not reformat of course!) and then ejected it, and the iPod screen returned to its proper state after a proper Windows disconnect.
    I have of course restarted my Mac and reset the iPod (Up + Center buttons held for ~5 sec) but no change. I don't remember changing the OS that would cause this - any suggestions as to the problem here?

    Hello, cgtyoder. 
    Thank you for visiting Apple Support Communities. 
    Try resetting the iPod and power cycling your Mac to see if this message disappears.  If the issue persists you may need to restore the device to factory settings.  The article below will walk you through both these steps.
    How to reset iPod
    http://support.apple.com/kb/ht1320
    Cheers,
    Jason H.

  • HT1351 Whenever I try and eject my iPod from iTunes after it is done syncing a box pops us that says "The iPods' 'Owners iPod' cannot be ejected because it contains files that are in use by another application".

    Whenever I try and eject my iPod from iTunes after it is done syncing a box pops us that says "The iPods' 'Owners iPod' cannot be ejected because it contains files that are in use by another application".iTunes is the only thing open on my computer so I don't understand what this could mean.  If anybody could help me out that would be great. Thanks

    Hello, cgtyoder. 
    Thank you for visiting Apple Support Communities. 
    Try resetting the iPod and power cycling your Mac to see if this message disappears.  If the issue persists you may need to restore the device to factory settings.  The article below will walk you through both these steps.
    How to reset iPod
    http://support.apple.com/kb/ht1320
    Cheers,
    Jason H.

  • I recently purchased the newest nano. I have 3 other nano's and iPad   iPhone, oh and iPod touch. When I plug in nano to my mac I get the message "iPod cannot update because it contains files that are used by another application. How can manage this?

    I recently purchased the newest nano. I have 3 other nano's and iPad   iPhone, oh and iPod touch. When I plug in nano to my mac I get the message "iPod cannot update because it contains files that are used by another application. How can manage this?

    dedonred wrote:
    "iPod cannot update because it contains files that are used by another application.
    It means that nano was used on a third-party software or synced from different computer to sync music. Does that nano show in iTunes? If yes, then restore completely. If not, then you may need to head to Apple Store and see what they can do.

  • When I try to eject my ipod after sync I get the following message:"The iPod cannot be restored because it contains files that are in use by another application.". I tried to restore but it doesn't work and I get the same message

    When I try to eject my ipod after sync I get the following message:The iPod cannot be restored because it contains files that are in use by another application.". I tried to restore but it doesn't work and I get the same message

    Go to your computer's System Tray and try ejecting.  If you can't eject, there is an application that is trying to access your iPod.
    Go to http://technet.microsoft.com/en-us/sysinternals/bb896653.aspx and download ProcessExplorer.
    Go to http://support.microsoft.com/kb/555665 and follow the instructions under Resolution.
    Note that this is a good, general process any time you can't access any file.
    In my case an update to RealPlayer installed a program called RecordingManager that was accessing my iPod.

  • InfoPath Cannot Save The Following Form - SharePoint 2013

    I've setup my SharePoint 2013 farm to allow to support InfoPath Services, however when I try to publish a form I keep getting the following error:
    InfoPath cannot save the following form: https://pathto.com/form/library/file.xsn
    Network Problems are preventing this file from being saved. If this problem persists, contact your network administrator.
    I've confirmed there's no firewall between my Windows 8.1 workstations (where I'm running InfoPath 2013 from) and the Windows Server 2012 server that's hosting the SharePoint 2013 farm. Any insight would be much appreciated.

    Hi,
    I recommend to verify the things below:
    Check if the WebClient service is started. If not, start the WebClient service.
    Use another user account to publish the InfoPath form to see how it works.
    Check if the form library is a valid library in the browser. If not, publish the form to a valid library.
    Check ULS log for detailed error message.
    Here is a similar thread for your reference:
    https://social.msdn.microsoft.com/Forums/office/en-US/86a2fc0f-d41f-401c-99fa-b2ca5412c9fd/infopath-cannot-save-the-following-form-this-libary-was-either-renamed-or-deleted-or-network?forum=sharepointcustomizationprevious
    Best regards.
    Thanks
    TechNet Community Support
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

  • Infopath cannot save the following form - this document library was either renamed or deleted

    Hi there,
    I'm working in InfoPath 2013, using a remote desktop connection to a Windows 7 machine publishing to an on-prem SharePoint 2013 server.
    When creating my form, I go to publish it to a form library and get the following error:
    InfoPath cannot save the following form http://myformlocationandname This document library was either renamed or deleted, or network problems are preventing the file from being saved. If this problem persists, please contact your network administrator
    I've tried updating a library, creating a new library, but neither work. I can however, edit a list and customise the form to then publish back without a problem.
    If anyone could offer any advice, I'd be very grateful! :-)
    Thanks very much,
    Alex

    Step1: First, the method of control :
    Add
    Windows Server Feature: User Interfaces and Infrastructure -> Desktop
    Experience 
    Reboot 
    Start
    Windows Services -> Themes service
    Step2: I did not answer:
    Go to SharePoint and create new Subsite
    Created Test Subsite

Maybe you are looking for