InfoPath deployment in SharePoint 2013
Hi,
I am new to INFOPATH development
We are trying to deploy code based infopath 2013 thourgh central admin.
It is getting deployed perfectly, but its getting deployed to 14 Hive folder.
How can we deploy it to 15 Hive folder structure ?
I have tried to deploy a sample infopath form. Even that is getting deployed to 14 Hive.
Are we missing anything?
Hi,
Per the
Office Blog said below, now we can still use the InfoPath in SharePoint 2013.
The InfoPath 2013 client will be supported through April 2023.
InfoPath Forms Services for SharePoint Server 2013 will be supported until April 2023.
InfoPath Forms Services in Office 365 will be supported until further notice.
To collect data using InfoPath form to SharePoint, you can refer to the article below.
http://office.microsoft.com/en-in/infopath-help/submit-and-save-form-data-HA101783379.aspx
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support
Similar Messages
-
I removed SkyDrive for Business and installed OneDrive for Business on my laptop. After that, I had problems opening a Word and Excel document in a SharePoint site (SP2013). After installing Service Pack2 from Office2010, this problem is solved.
But I still have the same problem with InfoPath. Whenever I click an InfoPath form (I have InfoPath 2010 on my laptop),...
... I get the error "cannot display web page".
When I change the URL
ms-infopath:ofe|u|http://intranet.water-link.be/samenwerken/awwit/Autorisaties/Gebruikersbeheer/2015-02-25%20Aanvraag%20gebruikersbeheer%20voor%20Stephanie%20Geeraerts.xml
into
http://intranet.water-link.be/samenwerken/awwit/Autorisaties/Gebruikersbeheer/2015-02-25%20Aanvraag%20gebruikersbeheer%20voor%20Stephanie%20Geeraerts.xml
I can open the InfoPath form and read it.
Any ideas about how to fix this ? I already tried to restore the Office 2010 via Control Panel - Install Programs but without any success...Hi Gert,
As I understand, you can’t open InfoPath form in SharePoint 2013 unless you change the URL without “ms-infopath:ofe|u|”.
There are some reasons which maybe cause this issue, and you can try to do things below:
Access CA -> General Application Settings -> Configure InfoPath Form Service -> Check the two options in User Browser-enabled Form Templates.
Go into the registry by typing regedit from the Run line and rename the SharePoint.OpenDocuments.5 key (ex. SharePoint.OpenDocuments.5.old) under HKEY_CLASSES_ROOT.
In library settings, click "relink documents to this library".
Here are some similar posts for your reference:
http://blogs.technet.com/b/office_integration__sharepoint/archive/2014/02/24/quot-the-webpage-cannot-be-displayed-quot-when-trying-to-open-edit-an-office-file-from-a-sharepoint-2013-site.aspx
http://www.infopathdev.com/forums/t/28998.aspx
Thanks,
Wendy
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected] -
When trying to deploy a sandboxed solution containing only a feature with a simple associated event receiver from VS 2013, I'm getting the following error:
Error occurred in deployment step 'Add Solution': An unknown exception occurred while executing a sandboxed code solution request in the worker process.\r\n|0
I'm working in Visual Studio 2013, deploying to SharePoint 2013.
The SharePoint project is very basic. I've only added a feature and an associated event receiver. It works without the event receiver. Then after I simply add the event receiver I get the error.
I've tried deploying directly from VS 2013 as well as publishing to a .WSP and uploading via web interface. Same error reported using both methods. I'm doing this using an Administrator account that I've confirmed is a site collection administrator.
Additionally, I've found that if I change Sandboxed Solution to False, deploy it, retract it, then change Sandboxed Solution back to True, then I can successfully deploy it. But this doesn't seem to be a permanent solution as the error will resurface a day
or two later...Hi Steve,
Are you running your SharePoint 2013 on domain controller?
http://www.learningsharepoint.com/2013/08/09/sharepoint-2013-error-an-unknown-exception-occurred-while-executing-a-sandboxed-code-solution-request-in-the-worker-process-rn0/
http://social.technet.microsoft.com/Forums/sharepoint/en-US/b7408608-c21b-45d9-bc16-e6afff510cd2/installed-sharepoint-2013-foundation-on-window-2010-server-issues-activating-sandbox-solutions?forum=sharepointadmin
My Blog- http://www.sharepoint-journey.com|
If a post answers your question, please click Mark As Answer on that post and Vote as Helpful -
Automatic Deployment between SharePoint 2013 systems
Hello,
I would like to ask about the possibility of an automated deployment between a local (development) SharePoint, a test server and a productive server. Is there such a tool or do I have to do all customizations and installations separately on each of the systems?
Thank you very much for your hints.
Regards,
RadekHi,
According to your post, my understanding is that you wanted to automatic Deployment between SharePoint 2013 systems.
Per my knowledge, you can move content between environments. Please refer to:
Moving content between SharePoint environments
Copy SharePoint production data to a test environment
In addition, if you want to Automatic Deploy SharePoint, you can refer to:
Automating SharePoint Deployments in Windows Azure using PowerShell
Automated Deployment of SharePoint 2013 with Windows Azure PowerShell
Automated Deployment of SharePoint 2013 in Windows Azure
Thanks,
Linda Li
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Linda Li
TechNet Community Support -
Requested registry access is not allowed when opening Infopath Forms on Sharepoint 2013
Hello Technet Community.
I hope this will help anybody out there that experienced this problem after patching Sharepoint 2013.
I have a distributed 3-tier Sharepoint 2013 environment. All of a sudden, after the last round of patched released on 7-Jul-2014, opening Infopath forms would throw a "something went wrong" error.
Looking at the ULS logs, you would see the error "Requested registry access is not allowed.".
I have looked at tons of posts on different blogs, and all pointed out that you need to grant "read" permissions to the application pool user (in my case a service account in AD) to the registry key (and subkeys):
HLKM/Software/Office Server/15.0
That indeed works, but it is not the proper way to do it. You should grant "read" permissions to this local group:
WSS_WPG
And special permissions to this local group:
WSS_ADMIN_WPG
Here is a snapshot of the special permissions needed
By the way, the WSS_PWG local group contains the app pool service account.
I do not know why patching Sharepoint removed these permissions from the registry keys, but oh well...
Anyway, Sharepoint is now happy and Infopath forms work as expected.
ClaudioCheck if your service account or infopath service account has access to server and specially registry
http://blogs.technet.com/b/spsforum/archive/2011/11/02/quick-solution-5-requested-registry-access-is-not-allowed.aspx
To solve the issue, please follow these steps:
Use the Process Monitor to monitor the registry, once you get the following ACCESS DENIED message(You can filter the result with “Result contains Access Denied”):
Date & Time: <date time>
Event Class: Registry
Operation: RegOpenKey
Result: ACCESS DENIED
Path: HKLM\SOFTWARE\Microsoft\Office Server\14.0
TID: 2020
Duration: 0.0000297
Desired Access: Read
Open Registry Editor (Start > Run, type regedit)
Open key: HKLM\SOFTWARE\Microsoft\Office Server\14.0(got from Process Monitor from step 1)
Assign the SharePoint Timer Service account the Read permission to this key
One can open registry using regedit command. In Registery editor go to
HKEY_LOCAL_MACHINE\Software\Microsoft\Shared Tools\15\Secure\FarmAdmin
Check central administration app pool Identity have permission on FarmAdmin. Permission can be check on right clicking FarmAdmin --> Permissions.
If this helped you resolve your issue, please mark it Answered -
Services Deployment in SharePoint 2013 Decision
As mentioned in the link, there are 2 ways that we can deploy services in SharePoint 2013 farm, one is traditional approach and other streamlined approach. How do we know which one we should go for?
http://technet.microsoft.com/en-us/library/jj219591.aspx
Thanks, Ram ChFor small to medium farms there's not that much practical difference. It's only in large farms or farms with abnormal workloads that they vary notably. Compare the 10k user models in both and play spot the difference.
The traditional design was never that sensible in its purest form, it was based on an overly stylised view of the classic three tier architecture model. It worked but was frequently shifting into the Streamlined approach anyway when you actually came down
to it.
Go with Streamlined, it's not going to be a materially different design to a traditional approach but it gets you there faster. -
How to Create simple WCF/REST (JOSN,get and post) and deploy to Sharepoint 2013 Server.
HI All,
I wan to create a simple WCF/REST service and deployed to SharePoint server , i have created some sample svc file and put in to _vti_bin folder using SharePoint solution using vs 2013 but its not accessible from IIS its always asking the Widows
Authentcation .
however my exact requirement is custom service should be accessible without asking the authentication like _vti_bin/Listdata.svc is there any way to do like this ?
my reference:
http://platinumdogs.me/2013/03/14/sharepoint-adventures-with-the-rest-api-part-1/
http://msdn.microsoft.com/en-us/library/office/jj860569(v=office.15).aspx
http://dotnetmentors.com/wcf/wcf-rest-service-to-get-or-post-json-data-and-retrieve-json-data-with-datacontract.aspx
http://stevenhollidge.blogspot.in/2011/09/wcfwebapi-rest-json-services.html
Thanks
SujilKumar
Software developerHi Sujil
Greetings. pls check this link
http://social.technet.microsoft.com/wiki/contents/articles/24194.sharepoint-2013-create-a-custom-wcf-rest-service-hosted-in-sharepoint-and-deployed-in-a-wsp.aspx
Please remember to click 'Mark as Answer' on the answer if it helps you -
Infopath support in sharepoint 2013
hi,
I heard that infopath will not be supported with SharePoint in the future is that true ?
in SharePoint 2013 I can use forms library to submit infopath form to collect data ?
Thanks,Hi,
Per the
Office Blog said below, now we can still use the InfoPath in SharePoint 2013.
The InfoPath 2013 client will be supported through April 2023.
InfoPath Forms Services for SharePoint Server 2013 will be supported until April 2023.
InfoPath Forms Services in Office 365 will be supported until further notice.
To collect data using InfoPath form to SharePoint, you can refer to the article below.
http://office.microsoft.com/en-in/infopath-help/submit-and-save-form-data-HA101783379.aspx
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support -
Creating the site content type failed when publish Infopath form to Sharepoint 2013
I have an InfoPath 2013 form trying to publish it to SharePoint 2013. When I click on publishing an error message appears stating "Creating the site content type failed". I can't figure out why this
is happening, any help on this one?
Also it appears the form template is uploaded when I go to the library settings under advance. When I see the .xsn file and click on it, it opens in InfoPath but not in sp.Rettajm, could you please find any errors in ULS?
-
Uploading 2010 Infopath Form to Sharepoint 2013
Hello,
I uploaded a Infopath 2010 form from my Sharepoint 2010 website to my new Sharepoint 2013 website.
I get the following editing message under my form title: Last modified at (todays date with time) by admin (Edit this Page)
How can I deactivate this feature or is this a feature? If not what is it and how can I get rid of it ?
Please help,
Kind regards, Ali TozluHi,
According to your post, my understanding is that you got last modified message when you upload a InfoPath 2010 form.
How did you upload the form from the SharePoint 2010 site to SharePoint 2013 site?
Could you give more information about this issue?
I tried to reproduce the issue with the following three methods, and in the library I not got the last modified message with the form.
1.Use the “Open with Explorer” method.
I opened the SharePoint 2010 site library in explorer which contained the InfoPath 2010 form, and opened the SharePoint 2013 site library in explorer.
Then I dragged the InfoPath 2010 form to the SharePoint 2013 site, the form upload without the last modified message.
2.Upload the form using the URL
In SharePoint 2013 site library, I clicked the “New dcument”->Browser->typed the URL of the SharePoint 2010 site library which contained the InfoPath 2010 form.
The form also upload without the last modified message.
3.Downloaded the InfoPath 2010 form to local computer, then uploaded the form to SharePoint 2013 library, the form upload without the last modified message.
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support -
Publishing infopath 2007 to sharepoint 2013
Hi,
Please let me know if we can publish infopth 2007 forms to sharepoint 2013.
ThanksHi,
Open the InfoPath file in either Office 2010 or 2013. You will be prompted to update the template so select the InfoPath 2010 / InfoPath 2013 template.
Change the data connections and then publish -
Problem connecting PowerPivot's (Office 2013) Data Model deployed on SharePoint 2013 to data source.
Hello:
Our configurations is as follow : SharePoint 2013 is on Server A; SQL Server Analysis server (SQL 2014) is on DB Server B;
SharePoint databases (sp_ ...) and our Data Mart (SQL 2014) are on server B. All servers runs Windows 2012 OS.
On my desktop I built a simple Excel 2013 workbook with PowerPivot Data Model that imported several tables from our Data Mart (server B above). Then created a Power View report. Locally everything works fine.
But when I uploaded this workbook to our SharePoint PowerPivot gallery and was trying to refresh data, I got the connection error: It’s very long but the ErrorCode is “rsCannotRetriveModel”. The end of the error message is:
'TemporaryDataSource'.</Message><MoreInformation><Source>Microsoft.AnalysisServices.SPClient</Source>
<Message>Call to Excel Services returned an error.</Message>
<MoreInformation><Source></Source><Message>We were unable to refresh one or more data connections in this workbook.
The following connections failed to refresh:ThisWorkbookDataModel</Message>
<MoreInformation><Source>Microsoft.Office.Excel.Server.WebServices</Source><Message>
We were unable to refresh one or more data connections in this workbook. The following connections failed to refresh:ThisWorkbookDataModel</Message></MoreInformation>
</MoreInformation></MoreInformation></MoreInformation></MoreInformation><Warnings xmlns="http://www.microsoft.com/sql/reportingservices" /></detail>
Our Excel Services on the SharePoint work fine and refresh data on different excel workbooks (with no Data Model) just fine. We are using an unattended account for Excel Services to connect from SharePoint server to our databases. Found a few references
on the topic, tried them but with no luck.
Please advise!
Regards
-Jeff
Jeff GorvitsHi Jeff,
Firstly, I need to confirm whether you are refreshing Data connection in browser, since Data Refresh is not supported in Office Web Apps. Please refer more information in this article:
http://blogs.technet.com/b/excel_services__powerpivot_for_sharepoint_support_blog/archive/2013/01/31/powerpivot-for-sharepoint-browser-refresh-fails-data-refresh-not-supported-in-office-web-apps.aspx
From the error "Call to Excel Services returned an error", please verify the location of the
data source, for example an Excel workbook, is registered as a trusted location with Excel Services:
https://technet.microsoft.com/en-us/library/jj219699(v=office.15).aspx
Since you are using unattended account for Excel Services to connect from SP to databases, I wonder if the issue occurs to unattended referesh, if so, please refer to:
http://social.technet.microsoft.com/wiki/contents/articles/3870.troubleshoot-powerpivot-data-refresh.aspx#Problems_using_the_Unattended_data_refresh_account
Regards,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected] .
Rebecca Tu
TechNet Community Support -
Infopath form for sharepoint 2013 lags when searching for person or group.
Dear all,
After implementing a infopath form on sharepoint, the search for person or group column lags when I search for someone the second time. (The first time won't lag). Is there a fix to this? And is there a way to modify the search for person or group function
to sharepoint OOTB person or group search? I think the OOTB one is a lot better. Thanks all.
Timothy LiuHave a look at this thread which discussed a same question:
http://social.msdn.microsoft.com/forums/sharepoint/en-US/c55f4245-b2b0-410b-94fc-2afd1ef80da8/preventing-users-from-editing-other-users-infopath-forms
thanks,
Flynn -
Hi,
We have a requirement to migrate the SharePoint 2007 Site containing SharePoint Designer Workflows with Info path forms to SharePoint 2013.
Can somebody please guide us as to what could be the best approach to go ahead?
Thanks in advance.
Regards,
VijayUse STSADM
backup and
restore to migrate SharePoint 2007 site
containing SharePoint Designer Workflows with Info path forms to SharePoint 2013. -
Configuring infopath forms in SharePoint 2013
The below is the error i am getting when i am tried to publish infopath form to a sharepoint list using WCF
A query to retrieve form data cannot be completed because this action would violate cross-domain restrictions.
If this form template is published to a SharePoint document library, cross-domain access for user form templates must be enabled under InfoPath Forms Services in SharePoint Central Administration, and the data connection settings must be stored in a UDC file
in a data connection library in the same site collection.
If this is an administrator-approved form template, the security level of the form must be set to full trust, or the data connection settings must be stored in a UDC file by using the Manage data connection files option under InfoPath Forms Services in SharePoint
Central Administration.
An entry has been added to the Windows event log of the server. Log ID:6932
Correlation ID:a24eb39c-7a50-4022-af09-f4e99b531858Hi ,
For resolving your issue , you can do as the followings:
Make sure that 'Allow user form templates to use authentication information contained in data connection files' in Central Admin is enabled
Create a Data Connection Library in your site
Convert the Data Connection to .udcx file
Give the path to data connection library
More information:
http://beginnerssharepointtips.blogspot.jp/2013/12/a-query-to-retrieve-form-data-cannot-be.html
Two similar posts for your reference:
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/2d5c7480-a122-4210-b9b8-c45f74744446/infopath-2013-forms-on-office365-with-external-rest-datasources?forum=sharepointcustomization
http://social.technet.microsoft.com/Forums/sharepoint/en-US/349cb27f-0e1d-4670-9848-1f00958b12f1/domain-level-security-issue-with-infopath-form
Best Regards,
Wendy
Wendy Li
TechNet Community Support
Maybe you are looking for
-
How to increase the page in PLD if you have more than 1 page for any doc
Hi Experts, I would like to know is there any way out to increase the page layout size of any marketing documents For Eg: i have a purchase order on 1st page i have all the information on next page i have the terms and conditions or you can say annex
-
Quick keyboard shortcut to show Overprint Preview
The old Command+Shift+7 to toggle Overprint Preview doesn't seem to work in Acrobat Pro 9. Is there another way of quickly toggling this function without having to enter Advanced>Print Production>Output Preview?
-
Need a good iOS app for measuring image size and app to set printer PPI.
I'm looking for a photo app for IOS that will give me an accurate representation of the PPI size of my images from my iPhone 6plus as well as my point and shoot camera and also let me set the dpi on my photo printer. Printing photos from the native I
-
Upgrade java from 1.2 to 1.5 on SunOS 5.8
Hi, Can anyone help me to upgrade java from 1.2 to 1.5 on SunOS 5.8 .... Thanks G. Singh
-
My mac updated, now top site page has changed and is in edit mode constantly-help?
When I restarted my mac after a scheduled update, the top site page still had all my saved sites on it but it was much bigger and the style and background have all changed. It also appears to be in edit mode and I can't see an edit button (like usual